summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/mpspec_def.h
AgeCommit message (Collapse)AuthorFilesLines
2018-01-14x86: Introduce and use MP IRQ trigger and polarity definesJan Kiszka1-3/+11
MP_IRQDIR_* constants pointed in the right direction but remained unused so far: It's cleaner to use symbolic values for the IRQ flags in the MP config table. That also saves some comments. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: jailhouse-dev@googlegroups.com Link: https://lkml.kernel.org/r/60809926663a1d38e2a5db47d020d6e2e7a70019.1511770314.git.jan.kiszka@siemens.com
2017-11-13Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "Three smaller changes: - clang fix - boot message beautification - unnecessary header inclusion removal" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Disable Clang warnings about GNU extensions x86/boot: Remove unnecessary #include <generated/utsrelease.h> x86/boot: Spell out "boot CPU" for BP
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-03x86/boot: Spell out "boot CPU" for BPJean Delvare1-1/+1
It's not obvious to everybody that BP stands for boot processor. At least it was not for me. And BP is also a CPU register on x86, so it is ambiguous. Spell out "boot CPU" everywhere instead. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Alok Kataria <akataria@vmware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-17MCA: delete all remaining traces of microchannel bus support.Paul Gortmaker1-2/+1
Hardware with MCA bus is limited to 386 and 486 class machines that are now 20+ years old and typically with less than 32MB of memory. A quick search on the internet, and you see that even the MCA hobbyist/enthusiast community has lost interest in the early 2000 era and never really even moved ahead from the 2.4 kernels to the 2.6 series. This deletes anything remaining related to CONFIG_MCA from core kernel code and from the x86 architecture. There is no point in carrying this any further into the future. One complication to watch for is inadvertently scooping up stuff relating to machine check, since there is overlap in the TLA name space (e.g. arch/x86/boot/mca.c). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Bottomley <JBottomley@Parallels.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-01-05x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusionYinghai Lu1-7/+0
Found one x2apic pre-enabled system, x2apic_mode suddenly get corrupted after register some cpus, when compiled CONFIG_NR_CPUS=255 instead of 512. It turns out that generic_processor_info() ==> phyid_set(apicid, phys_cpu_present_map) causes the problem. phys_cpu_present_map is sized by MAX_APICS bits, and pre-enabled system some cpus have an apic id > 255. The variable after phys_cpu_present_map may get corrupted silently: ffffffff828e8420 B phys_cpu_present_map ffffffff828e8440 B apic_verbosity ffffffff828e8444 B local_apic_timer_c2_ok ffffffff828e8448 B disable_apic ffffffff828e844c B x2apic_mode ffffffff828e8450 B x2apic_disabled ffffffff828e8454 B num_processors ... Actually phys_cpu_present_map is referenced via apic id, instead index. We should use MAX_LOCAL_APIC instead MAX_APICS. For 64-bit it will be 32768 in all cases. BSS will increase by 4k bytes on 64-bit: text data bss dec filename 21696943 4193748 12787712 38678403 vmlinux.before 21696943 4193748 12791808 38682499 vmlinux.after No change on 32bit. Finally we can remove MAX_APCIS that was rather confusing. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> LKML-Reference: <4D23BD9C.3070102@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-08x86: rename all fields of mpf_intel mpf_X to XJaswinder Singh Rajput1-10/+10
Impact: cleanup, solve 80 columns wrap problems It would be cleaner to rename all the mpf->mpf_X fields to mpf->X - that alone would give 4 characters per usage site. (we already know that it's an 'mpf' entity - no need to duplicate that in the field too) Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-08x86: rename intel_mp_floating to mpf_intelJaswinder Singh Rajput1-1/+2
Impact: cleanup, solve 80 columns wrap problems intel_mp_floating should be renamed to mpf_intel. The reason: the 'f' in MPF already means 'floating' which means MP Floating pointer structure - no need to repeat that in the type name. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05x86: rename all fields of mpc_table mpc_X to XJaswinder Singh Rajput1-10/+10
Impact: cleanup, solve 80 columns wrap problems It would be cleaner to rename all the mpc->mpc_X fields to mpc->X - that alone would give 4 characters per usage site. (we already know that it's an 'mpc' entity - no need to duplicate that in the field too) Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05x86: rename all fields of mpc_oemtable oem_X to XJaswinder Singh Rajput1-5/+5
Impact: cleanup, solve 80 columns wrap problems It would be cleaner to rename all the mpc->oem_X fields to mpc->X - that alone would give 4 characters per usage site. (we already know that it's an 'oem' entity - no need to duplicate that in the field too) Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05x86: rename all fields of mpc_bus mpc_X to XJaswinder Singh Rajput1-3/+3
Impact: cleanup, solve 80 columns wrap problems It would be cleaner to rename all the mpc->mpc_X fields to mpc->X - that alone would give 4 characters per usage site. (we already know that it's an 'mpc' entity - no need to duplicate that in the field too) Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05x86: rename all fields of mpc_cpu mpc_X to XJaswinder Singh Rajput1-7/+7
Impact: cleanup, solve 80 columns wrap problems It would be cleaner to rename all the mpc->mpc_X fields to mpc->X - that alone would give 4 characters per usage site. (we already know that it's an 'mpc' entity - no need to duplicate that in the field too) Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05x86: rename all fields of mpc_intsrc mpc_X to XJaswinder Singh Rajput1-7/+7
Impact: cleanup, solve 80 columns wrap problems It would be cleaner to rename all the mpc->mpc_X fields to mpc->X - that alone would give 4 characters per usage site. (we already know that it's an 'mpc' entity - no need to duplicate that in the field too) Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05x86: rename all fields of mpc_lintsrc mpc_X to XJaswinder Singh Rajput1-7/+7
Impact: cleanup, solve 80 columns wrap problems It would be cleaner to rename all the mpc->mpc_X fields to mpc->X - that alone would give 4 characters per usage site. (we already know that it's an 'mpc' entity - no need to duplicate that in the field too) Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-05x86: rename all fields of mpc_iopic mpc_X to XJaswinder Singh Rajput1-5/+5
Impact: cleanup, solve 80 columns wrap problems It would be cleaner to rename all the mpc->mpc_X fields to mpc->X - that alone would give 4 characters per usage site. (we already know that it's an 'mpc' entity - no need to duplicate that in the field too) Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04x86: rename mpc_config_oemtable to mpc_oemtableJaswinder Singh Rajput1-1/+1
Impact: cleanup, solve 80 columns wrap problems mpc_config_oemtable should be renamed to mpc_oemtable. The reason: the 'c' in MPC already means 'config' - no need to repeat that in the type name. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04x86: rename mpc_config_lintsrc to mpc_lintsrcJaswinder Singh Rajput1-1/+1
Impact: cleanup, solve 80 columns wrap problems mpc_config_lintsrc should be renamed to mpc_lintsrc. The reason: the 'c' in MPC already means 'config' - no need to repeat that in the type name. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04x86: rename mpc_config_intsrc to mpc_intsrcJaswinder Singh Rajput1-1/+1
Impact: cleanup, solve 80 columns wrap problems mpc_config_intsrc should be renamed to mpc_intsrc. The reason: the 'c' in MPC already means 'config' - no need to repeat that in the type name. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04x86: rename mpc_config_ioapic to mpc_ioapicJaswinder Singh Rajput1-1/+1
Impact: cleanup, solve 80 columns wrap problems mpc_config_ioapic should be renamed to mpc_ioapic. The reason: the 'c' in MPC already means 'config' - no need to repeat that in the type name. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04x86: rename mpc_config_processor to mpc_cpuJaswinder Singh Rajput1-1/+1
Impact: cleanup, solve 80 columns wrap problems mpc_config_processor should be renamed to mpc_cpu. The reason: the 'c' in MPC already means 'config' - no need to repeat that in the type name. Plus 'processor' is a lot longer than 'cpu' - so we try to use 'cpu' in all type names, as much as possible. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04x86: rename mpc_config_bus to mpc_busJaswinder Singh Rajput1-1/+1
Impact: cleanup, solve 80 columns wrap problems mpc_config_bus should be renamed to mpc_bus. The reason: the 'c' in MPC already means 'config' - no need to repeat that in the type name. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04x86: rename mp_config_table to mpc_tableJaswinder Singh Rajput1-1/+1
Impact: cleanup, solve 80 columns wrap problems mp_config_table should be renamed to mpc_table. The reason: the 'c' in MPC already means 'config' - no need to repeat that in the type name. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22x86: Fix ASM_X86__ header guardsH. Peter Anvin1-3/+3
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22x86, um: ... and asm-x86 moveAl Viro1-0/+180
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>