summaryrefslogtreecommitdiff
path: root/arch/m68k
AgeCommit message (Collapse)AuthorFilesLines
2023-12-12m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXECBaoquan He2-3/+3
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be dropped, then compiling errors will be triggered if below config items are set: === CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y === Here, change the dependency of buinding machine_kexec.o relocate_kernel.o and the ifdeffery in asm/kexe.h to CONFIG_KEXEC_CORE. Link: https://lkml.kernel.org/r/20231208073036.7884-3-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Eric DeVolder <eric_devolder@yahoo.com> Cc: Ignat Korchagin <ignat@cloudflare.com> Cc: kernel test robot <lkp@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-11-02Merge tag 'mm-stable-2023-11-01-14-33' of ↵Linus Torvalds1-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Kemeng Shi has contributed some compation maintenance work in the series 'Fixes and cleanups to compaction' - Joel Fernandes has a patchset ('Optimize mremap during mutual alignment within PMD') which fixes an obscure issue with mremap()'s pagetable handling during a subsequent exec(), based upon an implementation which Linus suggested - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the following patch series: mm/damon: misc fixups for documents, comments and its tracepoint mm/damon: add a tracepoint for damos apply target regions mm/damon: provide pseudo-moving sum based access rate mm/damon: implement DAMOS apply intervals mm/damon/core-test: Fix memory leaks in core-test mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval - In the series 'Do not try to access unaccepted memory' Adrian Hunter provides some fixups for the recently-added 'unaccepted memory' feature. To increase the feature's checking coverage. 'Plug a few gaps where RAM is exposed without checking if it is unaccepted memory' - In the series 'cleanups for lockless slab shrink' Qi Zheng has done some maintenance work which is preparation for the lockless slab shrinking code - Qi Zheng has redone the earlier (and reverted) attempt to make slab shrinking lockless in the series 'use refcount+RCU method to implement lockless slab shrink' - David Hildenbrand contributes some maintenance work for the rmap code in the series 'Anon rmap cleanups' - Kefeng Wang does more folio conversions and some maintenance work in the migration code. Series 'mm: migrate: more folio conversion and unification' - Matthew Wilcox has fixed an issue in the buffer_head code which was causing long stalls under some heavy memory/IO loads. Some cleanups were added on the way. Series 'Add and use bdev_getblk()' - In the series 'Use nth_page() in place of direct struct page manipulation' Zi Yan has fixed a potential issue with the direct manipulation of hugetlb page frames - In the series 'mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO' has improved our handling of gigantic pages in the hugetlb vmmemmep optimizaton code. This provides significant boot time improvements when significant amounts of gigantic pages are in use - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code rationalization and folio conversions in the hugetlb code - Yin Fengwei has improved mlock()'s handling of large folios in the series 'support large folio for mlock' - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has added statistics for memcg v1 users which are available (and useful) under memcg v2 - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable) prctl so that userspace may direct the kernel to not automatically propagate the denial to child processes. The series is named 'MDWE without inheritance' - Kefeng Wang has provided the series 'mm: convert numa balancing functions to use a folio' which does what it says - In the series 'mm/ksm: add fork-exec support for prctl' Stefan Roesch makes is possible for a process to propagate KSM treatment across exec() - Huang Ying has enhanced memory tiering's calculation of memory distances. This is used to permit the dax/kmem driver to use 'high bandwidth memory' in addition to Optane Data Center Persistent Memory Modules (DCPMM). The series is named 'memory tiering: calculate abstract distance based on ACPI HMAT' - In the series 'Smart scanning mode for KSM' Stefan Roesch has optimized KSM by teaching it to retain and use some historical information from previous scans - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the series 'mm: memcg: fix tracking of pending stats updates values' - In the series 'Implement IOCTL to get and optionally clear info about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits us to atomically read-then-clear page softdirty state. This is mainly used by CRIU - Hugh Dickins contributed the series 'shmem,tmpfs: general maintenance', a bunch of relatively minor maintenance tweaks to this code - Matthew Wilcox has increased the use of the VMA lock over file-backed page faults in the series 'Handle more faults under the VMA lock'. Some rationalizations of the fault path became possible as a result - In the series 'mm/rmap: convert page_move_anon_rmap() to folio_move_anon_rmap()' David Hildenbrand has implemented some cleanups and folio conversions - In the series 'various improvements to the GUP interface' Lorenzo Stoakes has simplified and improved the GUP interface with an eye to providing groundwork for future improvements - Andrey Konovalov has sent along the series 'kasan: assorted fixes and improvements' which does those things - Some page allocator maintenance work from Kemeng Shi in the series 'Two minor cleanups to break_down_buddy_pages' - In thes series 'New selftest for mm' Breno Leitao has developed another MM self test which tickles a race we had between madvise() and page faults - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups and an optimization to the core pagecache code - Nhat Pham has added memcg accounting for hugetlb memory in the series 'hugetlb memcg accounting' - Cleanups and rationalizations to the pagemap code from Lorenzo Stoakes, in the series 'Abstract vma_merge() and split_vma()' - Audra Mitchell has fixed issues in the procfs page_owner code's new timestamping feature which was causing some misbehaviours. In the series 'Fix page_owner's use of free timestamps' - Lorenzo Stoakes has fixed the handling of new mappings of sealed files in the series 'permit write-sealed memfd read-only shared mappings' - Mike Kravetz has optimized the hugetlb vmemmap optimization in the series 'Batch hugetlb vmemmap modification operations' - Some buffer_head folio conversions and cleanups from Matthew Wilcox in the series 'Finish the create_empty_buffers() transition' - As a page allocator performance optimization Huang Ying has added automatic tuning to the allocator's per-cpu-pages feature, in the series 'mm: PCP high auto-tuning' - Roman Gushchin has contributed the patchset 'mm: improve performance of accounted kernel memory allocations' which improves their performance by ~30% as measured by a micro-benchmark - folio conversions from Kefeng Wang in the series 'mm: convert page cpupid functions to folios' - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about kmemleak' - Qi Zheng has improved our handling of memoryless nodes by keeping them off the allocation fallback list. This is done in the series 'handle memoryless nodes more appropriately' - khugepaged conversions from Vishal Moola in the series 'Some khugepaged folio conversions'" [ bcachefs conflicts with the dynamically allocated shrinkers have been resolved as per Stephen Rothwell in https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/ with help from Qi Zheng. The clone3 test filtering conflict was half-arsed by yours truly ] * tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits) mm/damon/sysfs: update monitoring target regions for online input commit mm/damon/sysfs: remove requested targets when online-commit inputs selftests: add a sanity check for zswap Documentation: maple_tree: fix word spelling error mm/vmalloc: fix the unchecked dereference warning in vread_iter() zswap: export compression failure stats Documentation: ubsan: drop "the" from article title mempolicy: migration attempt to match interleave nodes mempolicy: mmap_lock is not needed while migrating folios mempolicy: alloc_pages_mpol() for NUMA policy without vma mm: add page_rmappable_folio() wrapper mempolicy: remove confusing MPOL_MF_LAZY dead code mempolicy: mpol_shared_policy_init() without pseudo-vma mempolicy trivia: use pgoff_t in shared mempolicy tree mempolicy trivia: slightly more consistent naming mempolicy trivia: delete those ancient pr_debug()s mempolicy: fix migrate_pages(2) syscall return nr_failed kernfs: drop shared NUMA mempolicy hooks hugetlbfs: drop shared NUMA mempolicy pretence mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets() ...
2023-11-02Merge tag 'm68knommu-for-v6.7' of ↵Linus Torvalds11-19/+37
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: "A few changes, most of them related to fixing warnings when compiling with "W=1". These follow up Geert's recent changes for M68K for this too. These ones complete the fixes for the nommu and ColdFire specific code. Also a couple of other fixes to improve ROM default addressing and compiling for the Cleopatra boards. Summary: - improve default Kconfig ROM section settings - fix compilation for some Cleopatra boards - fixes and cleanups for warnings compiling with 'W=1'" * tag 'm68knommu-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: 68000: fix warning in timer code m68k: 68000: fix warnings in 68000 interrupt handling m68k: coldfire: remove unused variable in MMU code m68k: coldfire: fix warnings in uboot argument processing m68k: coldfire: make mcf_maskimr() static m68k: coldfire: ensure gpio prototypes visible m68k: coldfire: add and use "vectors.h" m68knommu: fix compilation for ColdFire/Cleopatra boards m68knommu: improve config ROM setting defaults
2023-11-01Merge tag 'asm-generic-6.7' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ia64 removal and asm-generic updates from Arnd Bergmann: - The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. - The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. * tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: hexagon: Remove unusable symbols from the ptrace.h uapi asm-generic: Fix spelling of architecture arch: Reserve map_shadow_stack() syscall number for all architectures syscalls: Cleanup references to sys_lookup_dcookie() Documentation: Drop or replace remaining mentions of IA64 lib/raid6: Drop IA64 support Documentation: Drop IA64 from feature descriptions kernel: Drop IA64 support from sig_fault handlers arch: Remove Itanium (IA-64) architecture
2023-11-01Merge tag 'dma-mapping-6.7-2023-10-30' of ↵Linus Torvalds4-37/+17
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - get rid of the fake support for coherent DMA allocation on coldfire with caches (Christoph Hellwig) - add a few Kconfig dependencies so that Kconfig catches the use of invalid configurations (Christoph Hellwig) - fix a type in dma-debug output (Chuck Lever) - rewrite a comment in swiotlb (Sean Christopherson) * tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: Fix a typo in a debugging eye-catcher swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE m68k: remove unused includes from dma.c m68k: don't provide arch_dma_alloc for nommu/coldfire net: fec: use dma_alloc_noncoherent for data cache enabled coldfire m68k: use the coherent DMA code for coldfire without data cache dma-direct: warn when coherent allocations aren't supported dma-direct: simplify the use atomic pool logic in dma_direct_alloc dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol dma-direct: add dependencies to CONFIG_DMA_GLOBAL_POOL
2023-11-01Merge tag 'm68k-for-v6.7-tag1' of ↵Linus Torvalds109-677/+634
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - misc aesthetical improvements for the floating point emulator - remove the last user of strlcpy() - use kernel's generic libgcc functions - misc fixes for W=1 builds - misc indentation fixes - misc fixes and improvements - defconfig updates * tag 'm68k-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (72 commits) m68k: lib: Include <linux/libgcc.h> for __muldi3() m68k: fpsp040: Fix indentation by 5 spaces m68k: Fix indentation by 2 or 5 spaces in <asm/page_mm.h> m68k: kernel: Fix indentation by 7 spaces in traps.c m68k: sun3: Fix indentation by 5 or 7 spaces m68k: Fix indentation by 7 spaces in <asm/io_mm.h> m68k: defconfig: Update virt_defconfig for v6.6-rc3 m68k: defconfig: Update defconfigs for v6.6-rc1 m68k: io: Mark mmio read addresses as const m68k: Replace GPL 2.0+ README.legal boilerplate with SPDX m68k: sun3: Change led_pattern[] to unsigned char m68k: Add missing types to asm/irq.h m68k: sun3/3x: Add and use "sun3.h" m68k: sun3x: Make dvma_print() static m68k: sun3x: Make sun3x_halt() static m68k: sun3x: Do not mark dvma_map_iommu() inline m68k: sun3x: Fix signature of sun3_leds() m68k: sun3: Make sun3_platform_init() static m68k: sun3: Make print_pte() static m68k: sun3: Annotate prom_printf() with __printf() ...
2023-11-01Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-9/+10
Pull drm updates from Dave Airlie: "Highlights: - AMD adds some more upcoming HW platforms - Intel made Meteorlake stable and started adding Lunarlake - nouveau has a bunch of display rework in prepartion for the NVIDIA GSP firmware support - msm adds a7xx support - habanalabs has finished migration to accel subsystem Detail summary: kernel: - add initial vmemdup-user-array core: - fix platform remove() to return void - drm_file owner updated to reflect owner - move size calcs to drm buddy allocator - let GPUVM build as a module - allow variable number of run-queues in scheduler edid: - handle bad h/v sync_end in EDIDs panfrost: - add Boris as maintainer fbdev: - use fb_ops helpers more - only allow logo use from fbcon - rename fb_pgproto to pgprot_framebuffer - add HPD state to drm_connector_oob_hotplug_event - convert to fbdev i/o mem helpers i915: - Enable meteorlake by default - Early Xe2 LPD/Lunarlake display enablement - Rework subplatforms into IP version checks - GuC based TLB invalidation for Meteorlake - Display rework for future Xe driver integration - LNL FBC features - LNL display feature capability reads - update recommended fw versions for DG2+ - drop fastboot module parameter - added deviceid for Arrowlake-S - drop preproduction workarounds - don't disable preemption for resets - cleanup inlines in headers - PXP firmware loading fix - Fix sg list lengths - DSC PPS state readout/verification - Add more RPL P/U PCI IDs - Add new DG2-G12 stepping - DP enhanced framing support to state checker - Improve shared link bandwidth management - stop using GEM macros in display code - refactor related code into display code - locally enable W=1 warnings - remove PSR watchdog timers on LNL amdgpu: - RAS/FRU EEPROM updatse - IP discovery updatses - GC 11.5 support - DCN 3.5 support - VPE 6.1 support - NBIO 7.11 support - DML2 support - lots of IP updates - use flexible arrays for bo list handling - W=1 fixes - Enable seamless boot in more cases - Enable context type property for HDMI - Rework GPUVM TLB flushing - VCN IB start/size alignment fixes amdkfd: - GC 10/11 fixes - GC 11.5 support - use partial migration in GPU faults radeon: - W=1 Fixes - fix some possible buffer overflow/NULL derefs nouveau: - update uapi for NO_PREFETCH - scheduler/fence fixes - rework suspend/resume for GSP-RM - rework display in preparation for GSP-RM habanalabs: - uapi: expose tsc clock - uapi: block access to eventfd through control device - uapi: force dma-buf export to PAGE_SIZE alignments - complete move to accel subsystem - move firmware interface include files - perform hard reset on PCIe AXI drain event - optimise user interrupt handling msm: - DP: use existing helpers for DPCD - DPU: interrupts reworked - gpu: a7xx (a730/a740) support - decouple msm_drv from kms for headless devices mediatek: - MT8188 dsi/dp/edp support - DDP GAMMA - 12 bit LUT support - connector dynamic selection capability rockchip: - rv1126 mipi-dsi/vop support - add planar formats ast: - rename constants panels: - Mitsubishi AA084XE01 - JDI LPM102A188A - LTK050H3148W-CTA6 ivpu: - power management fixes qaic: - add detach slice bo api komeda: - add NV12 writeback tegra: - support NVSYNC/NHSYNC - host1x suspend fixes ili9882t: - separate into own driver" * tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits) drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo drm/amdgpu: Remove duplicate fdinfo fields drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table drm/amdgpu: Identify data parity error corrected in replay mode drm/amdgpu: Fix typo in IP discovery parsing drm/amd/display: fix S/G display enablement drm/amdxcp: fix amdxcp unloads incompletely drm/amd/amdgpu: fix the GPU power print error in pm info drm/amdgpu: Use pcie domain of xcc acpi objects drm/amd: check num of link levels when update pcie param drm/amdgpu: Add a read to GFX v9.4.3 ring test drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported. drm/amdgpu: get RAS poison status from DF v4_6_2 drm/amdgpu: Use discovery table's subrevision drm/amd/display: 3.2.256 drm/amd/display: add interface to query SubVP status drm/amd/display: Read before writing Backlight Mode Set Register drm/amd/display: Disable SYMCLK32_SE RCO on DCN314 ...
2023-10-23m68k: 68000: fix warning in timer codeGreg Ungerer1-0/+2
When building with W=1: CC arch/m68k/68000/timers.o arch/m68k/68000/timers.c:120:5: warning: no previous prototype for ‘m68328_hwclk’ [-Wmissing-prototypes] int m68328_hwclk(int set, struct rtc_time *t) ^~~~~~~~~~~~ Include m68328.h to get prototype for m68328_hwclk(). Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-23m68k: 68000: fix warnings in 68000 interrupt handlingGreg Ungerer2-1/+11
When building with W=1: CC arch/m68k/68000/ints.o arch/m68k/68000/ints.c:77:6: warning: no previous prototype for ‘process_int’ [-Wmissing-prototypes] void process_int(int vec, struct pt_regs *fp) ^~~~~~~~~~~ arch/m68k/68000/ints.c:153:13: warning: no previous prototype for ‘trap_init’ [-Wmissing-prototypes] void __init trap_init(void) ^~~~~~~~~ Include linux/cpu.h to get the prototype for taps_init(). Create a local ints.h for prototype of process_int(). Also mark process_int() as asmlinkage, since it is called from the first level interrupt assembly handler. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-23m68k: coldfire: remove unused variable in MMU codeGreg Ungerer1-2/+1
When building with W=1: CC arch/m68k/mm/mcfmmu.o arch/m68k/mm/mcfmmu.c: In function ‘paging_init’: arch/m68k/mm/mcfmmu.c:41:30: warning: variable ‘bootmem_end’ set but not used [-Wunused-but-set-variable] unsigned long next_pgtable, bootmem_end; ^~~~~~~~~~~ Remove variable bootmem_end and its unused setting. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-23m68k: coldfire: fix warnings in uboot argument processingGreg Ungerer1-5/+8
When building with W=1: CC arch/m68k/kernel/uboot.o arch/m68k/kernel/uboot.c: In function ‘parse_uboot_commandline’: arch/m68k/kernel/uboot.c:68:36: warning: variable ‘uboot_initrd_end’ set but not used [-Wunused-but-set-variable] unsigned long uboot_initrd_start, uboot_initrd_end; ^~~~~~~~~~~~~~~~ arch/m68k/kernel/uboot.c:68:16: warning: variable ‘uboot_initrd_start’ set but not used [-Wunused-but-set-variable] unsigned long uboot_initrd_start, uboot_initrd_end; ^~~~~~~~~~~~~~~~~~ arch/m68k/kernel/uboot.c:66:16: warning: variable ‘uboot_kbd’ set but not used [-Wunused-but-set-variable] unsigned long uboot_kbd; ^~~~~~~~~ arch/m68k/kernel/uboot.c: At top level: arch/m68k/kernel/uboot.c:90:13: warning: no previous prototype for ‘process_uboot_commandline’ [-Wmissing-prototypes] __init void process_uboot_commandline(char *commandp, int size) ^~~~~~~~~~~~~~~~~~~~~~~~~ A couple of issues here. Firstly we already have a bootinfo.h that has a prototype for process_uboot_commandline(), we should include that. Secondly uboot_kbd is not used at all and can be removed. Thirdly the conditional code based on CONFIG_BLK_DEV_INITRD means that sometimes uboot_initrd_start and uboot_initrd_end are not needed. Make their declaration and asignment conditional on CONFIG_BLK_DEV_INITRD same as the code that uses them. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-23m68k: coldfire: make mcf_maskimr() staticGreg Ungerer1-2/+2
When building with W=1: CC arch/m68k/coldfire/intc.o arch/m68k/coldfire/intc.c:83:6: warning: no previous prototype for ‘mcf_maskimr’ [-Wmissing-prototypes] void mcf_maskimr(unsigned int mask) ^~~~~~~~~~~ The mcf_maskimr() function is only used within this file, make it static to reduce name space pollution and fix warning. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-23m68k: coldfire: ensure gpio prototypes visibleGreg Ungerer1-4/+4
When building with W=1: CC arch/m68k/coldfire/gpio.o arch/m68k/coldfire/gpio.c:19:5: warning: no previous prototype for ‘__mcfgpio_get_value’ [-Wmissing-prototypes] int __mcfgpio_get_value(unsigned gpio) ^~~~~~~~~~~~~~~~~~~ arch/m68k/coldfire/gpio.c:25:6: warning: no previous prototype for ‘__mcfgpio_set_value’ [-Wmissing-prototypes] void __mcfgpio_set_value(unsigned gpio, int value) ^~~~~~~~~~~~~~~~~~~ arch/m68k/coldfire/gpio.c:50:5: warning: no previous prototype for ‘__mcfgpio_direction_input’ [-Wmissing-prototypes] int __mcfgpio_direction_input(unsigned gpio) ^~~~~~~~~~~~~~~~~~~~~~~~~ arch/m68k/coldfire/gpio.c:65:5: warning: no previous prototype for ‘__mcfgpio_direction_output’ [-Wmissing-prototypes] int __mcfgpio_direction_output(unsigned gpio, int value) ^~~~~~~~~~~~~~~~~~~~~~~~~~ arch/m68k/coldfire/gpio.c:96:5: warning: no previous prototype for ‘__mcfgpio_request’ [-Wmissing-prototypes] int __mcfgpio_request(unsigned gpio) ^~~~~~~~~~~~~~~~~ arch/m68k/coldfire/gpio.c:102:6: warning: no previous prototype for ‘__mcfgpio_free’ [-Wmissing-prototypes] void __mcfgpio_free(unsigned gpio) ^~~~~~~~~~~~~~ The local m68k asm version of gpio.h has prototypes for all of these, but they are not always visible depending on the config options enabled. Move the prototypes so they are always visible. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-23m68k: coldfire: add and use "vectors.h"Greg Ungerer2-0/+5
When building with W=1: arch/m68k/coldfire/vectors.c:43:13: warning: no previous prototype for ‘trap_init’ [-Wmissing-prototypes] void __init trap_init(void) ^~~~~~~~~ Fix this by introducing a new header file "vectors.h" for holding the prototypes of functions implemented in arch/m68k/coldfire/vectors.c. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-23m68knommu: fix compilation for ColdFire/Cleopatra boardsGreg Ungerer1-3/+2
The ColdFire based Cleopatra family of boards use mostly the same external pin arrangements as the NETtel board family. The build uses the NETtel specific code as needed, but not all the conditional defines allow for this. If you have the CONFIG_NETtel config option set everything compiles as expected, but if you only select the CONFIG_CLEOPATRA board type then you will get compile failures: arch/m68k/coldfire/nettel.c: In function ‘nettel_smc91x_init’: arch/m68k/coldfire/nettel.c:126:2: error: implicit declaration of function ‘mcf_setppdata’; did you mean ‘xas_set_update’? [-Werror=implicit-function-declaration] mcf_setppdata(0, 0x0080); ^~~~~~~~~~~~~ xas_set_update Fix the nettel.h include conditional checks to cover all board types. This also means some code paths need to check for the 5407 SoC - since one of the Cleopatra board types is based on that. It is very similar to the 5307 specific code, and it can use that "as-is". Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-23m68knommu: improve config ROM setting defaultsGreg Ungerer1-2/+2
The ROM region configuration settings used on some nommu m68k systems (historically mostly 68328 (Dragonball) CPUs) default to an address of 0. That can easily clash with default RAM address settings which also default to 0. Of course that is invalid and those ranges overlap, but if you make no value selection that is what you end up with. Those default values produce a valid configuration but will fail compilation like this: m68k-linux-ld: section .rodata VMA [0000000000001000,0000000000262227] overlaps section .text VMA [0000000000000400,0000000000455e7f] Looking at the platforms that use the ROM region configuration settings it is clear that we can choose much better defaults than 0. By far the most common ROM region settings are these: CONFIG_ROMVEC=0x10c10000 CONFIG_ROMSTART=0x10c10400 So lets make these the default values. It is still possible to configure overlapping ROM and RAM regions, but at least the default selections are now valid. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305301407.z33zOjcG-lkp@intel.com/ Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-22m68k: remove unused includes from dma.cChristoph Hellwig1-9/+0
dma.c doesn't need most of the headers it includes. Also there is no point in undefining the DEBUG symbol given that it isn't used anywhere in this small file. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-22m68k: don't provide arch_dma_alloc for nommu/coldfireChristoph Hellwig2-24/+0
Coldfire cores configured with a data cache can't provide coherent DMA allocations at all. Instead of returning non-coherent kernel memory in this case, return NULL and fail the allocation. The only driver that used to rely on the previous behavior (fec) has been switched to use non-coherent allocations for this case recently. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-22m68k: use the coherent DMA code for coldfire without data cacheChristoph Hellwig4-6/+18
Coldfire cores configured without a data cache are DMA coherent and should thus simply use the simple coherent version of dma-direct. Introduce a new COLDFIRE_COHERENT_DMA Kconfig symbol as a convenient short hand for such configurations, and a M68K_NONCOHERENT_DMA symbol for all cases where we need to build non-coherent DMA infrastructure to simplify the Kconfig and code conditionals. Not building the non-coherent DMA code slightly reduces the code size for such configurations. Numers for m5249evb_defconfig below: text data bss dec hex filename 2896158 401052 65392 3362602 334f2a vmlinux.before 2895166 400988 65392 3361546 334b0a vmlinux.after Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-22dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbolChristoph Hellwig1-0/+1
Instead of using arch_dma_alloc if none of the generic coherent allocators are used, require the architectures to explicitly opt into providing it. This will used to deal with the case of m68knommu and coldfire where we can't do any coherent allocations whatsoever, and also makes it clear that arch_dma_alloc is a last resort. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org>
2023-10-18mm: delete checks for xor_unlock_is_negative_byte()Matthew Wilcox (Oracle)1-1/+0
Architectures which don't define their own use the one in asm-generic/bitops/lock.h. Get rid of all the ifdefs around "maybe we don't have it". Link: https://lkml.kernel.org/r/20231004165317.1061855-15-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18m68k: implement xor_unlock_is_negative_byteMatthew Wilcox (Oracle)1-0/+22
Using EOR to clear the guaranteed-to-be-set lock bit will test the negative flag just like the x86 implementation. This should be more efficient than the generic implementation in filemap.c. It would be better if m68k had __GCC_ASM_FLAG_OUTPUTS__. Coldfire doesn't have a byte-sized EOR, so we test bit 7 after the EOR, which is a second memory access, but it's slightly better than the current C code. Link: https://lkml.kernel.org/r/20231004165317.1061855-10-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-16m68k: lib: Include <linux/libgcc.h> for __muldi3()Geert Uytterhoeven1-0/+1
When building with W=1: arch/m68k/lib/muldi3.c:82:1: warning: no previous prototype for ‘__muldi3’ [-Wmissing-prototypes] 82 | __muldi3 (DItype u, DItype v) | ^~~~~~~~ Fix this by including <linux/libgcc.h>. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/160c1fd14b4798f576d9649334b1d2c77db5cb07.1697008341.git.geert@linux-m68k.org
2023-10-16m68k: fpsp040: Fix indentation by 5 spacesGeert Uytterhoeven1-44/+44
Indentation should use TABs, not spaces. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/5ab108be356a5d2a6e6d72bc418ccf1c1938e8fe.1696602993.git.geert@linux-m68k.org
2023-10-16m68k: Fix indentation by 2 or 5 spaces in <asm/page_mm.h>Geert Uytterhoeven1-23/+22
Indentation should use TABs, not spaces. Fix whitespace in reindented code while at it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/2819709eee2be69c93497d4e97413bd0e05a9268.1696602993.git.geert@linux-m68k.org
2023-10-16m68k: kernel: Fix indentation by 7 spaces in traps.cGeert Uytterhoeven1-4/+4
Indentation should use TABs, not spaces. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/d1b38c9d389c1135f7856cf5f90852c2f1584c50.1696602993.git.geert@linux-m68k.org
2023-10-16m68k: sun3: Fix indentation by 5 or 7 spacesGeert Uytterhoeven3-62/+60
Indentation should use TABs, not spaces. Fix whitespace in reindented code while at it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/167216dfe9795056b7a69415695772887aca6d80.1696602993.git.geert@linux-m68k.org
2023-10-16m68k: Fix indentation by 7 spaces in <asm/io_mm.h>Geert Uytterhoeven1-12/+12
Indentation should use TABs, not spaces. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/41ca6ab21459164a52f5f468c32ef09aee7ba3d3.1696602993.git.geert@linux-m68k.org
2023-10-12fbdev: Replace fb_pgprotect() with pgprot_framebuffer()Thomas Zimmermann1-9/+10
Rename the fbdev mmap helper fb_pgprotect() to pgprot_framebuffer(). The helper sets VMA page-access flags for framebuffers in device I/O memory. Also clean up the helper's parameters and return value. Instead of the VMA instance, pass the individial parameters separately: existing page-access flags, the VMAs start and end addresses and the offset in the underlying device memory rsp file. Return the new page-access flags. These changes align pgprot_framebuffer() with other pgprot_() functions. v4: * fix commit message (Christophe) v3: * rename fb_pgprotect() to pgprot_framebuffer() (Arnd) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230922080636.26762-3-tzimmermann@suse.de
2023-10-06arch: Reserve map_shadow_stack() syscall number for all architecturesSohil Mehta1-0/+1
commit c35559f94ebc ("x86/shstk: Introduce map_shadow_stack syscall") recently added support for map_shadow_stack() but it is limited to x86 only for now. There is a possibility that other architectures (namely, arm64 and RISC-V), that are implementing equivalent support for shadow stacks, might need to add support for it. Independent of that, reserving arch-specific syscall numbers in the syscall tables of all architectures is good practice and would help avoid future conflicts. map_shadow_stack() is marked as a conditional syscall in sys_ni.c. Adding it to the syscall tables of other architectures is harmless and would return ENOSYS when exercised. Note, map_shadow_stack() was assigned #453 during the merge process since #452 was taken by fchmodat2(). For Powerpc, map it to sys_ni_syscall() as is the norm for Powerpc syscall tables. For Alpha, map_shadow_stack() takes up #563 as Alpha still diverges from the common syscall numbering system in the other architectures. Link: https://lore.kernel.org/lkml/20230515212255.GA562920@debug.ba.rivosinc.com/ Link: https://lore.kernel.org/lkml/b402b80b-a7c6-4ef0-b977-c0f5f582b78a@sirena.org.uk/ Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-06m68k: defconfig: Update virt_defconfig for v6.6-rc3Geert Uytterhoeven1-1/+2
- Enable CONFIG_DRM_FBDEV_EMULATION and CONFIG_FB_DEVICE (no longer auto-enabled since commit bb6c4507fe825f1b ("drm: fix up fbdev Kconfig defaults")), - Drop CONFIG_FRAMEBUFFER_CONSOLE=y (auto-enabled since commit bb6c4507fe825f1b ("drm: fix up fbdev Kconfig defaults")). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/6f30b86b83b972e9902b62295f397a20512d5507.1695977960.git.geert@linux-m68k.org
2023-10-06m68k: defconfig: Update defconfigs for v6.6-rc1Geert Uytterhoeven13-1/+20
- Enable modular build of the new device model tests, - Enable modular build of the glob self-test on configs that didn't have it yet (visible since commit b67abaad4d25b5d9 ("kunit: Allow kunit test modules to use test filtering")), - Replace CONFIG_FB=y by CONFIG_FRAMEBUFFER_CONSOLE=y on the virt platform (the former is no longer needed since commit 55bffc8170bb5813 ("fbdev: Split frame buffer support in FB and FB_CORE symbols")), the latter is no longer auto-enabled since commit a5ae331edb02b664 ("drm: Drop select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION")). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/43ef623c9053862d93fbc746689d4897b35597ef.1694442486.git.geert@linux-m68k.org
2023-10-06m68k: io: Mark mmio read addresses as constArnd Bergmann1-15/+17
Passing constant __iomem tokens into the readl() family of helpers or any of the others causes a warning on m68k: include/asm-generic/io.h: In function 'ioread8_rep': arch/m68k/include/asm/io_mm.h:375:44: warning: passing argument 1 of 'raw_insb' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 375 | #define readsb(port, buf, nr) raw_insb((port), (u8 Add a 'const' modifier to the pointers to shut up the warnings here. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309251926.bPl23AhG-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20230925155328.443664-1-arnd@kernel.org [geert: Fix missed rom_in_{8,be16,le16}()] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-10-06m68k: Replace GPL 2.0+ README.legal boilerplate with SPDXGeert Uytterhoeven9-41/+14
Upstream Linux never had a "README.legal" file, but it was present in early source releases of Linux/m68k. It contained a simple copyright notice and a link to a version of the "COPYING" file that predated the addition of the "only valid GPL version is v2" clause. Get rid of the references to non-existent files by replacing the boilerplate with SPDX license identifiers. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Link: https://lore.kernel.org/r/23430c233728ab02ec0af8e714994398d383137a.1695031668.git.geert@linux-m68k.org
2023-10-06m68k: sun3: Change led_pattern[] to unsigned charGeert Uytterhoeven1-5/+5
The values stored in led_pattern[] are only used for passing to sun3_leds(), which takes an "unsigned char". Change the type of led_pattern[] accordingly, to reduce kernel size. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/794c5d543dbdae8336a13ef2459adafaaadb7d86.1695031620.git.geert@linux-m68k.org
2023-10-06m68k: Add missing types to asm/irq.hRolf Eike Beer1-0/+5
As reported in commit f8b648bf6628 ("net: sunhme: move asm includes to below linux includes") when including this <asm/*> header before the needed <linux/*> headers the compilation will fail because of missing types: arch/m68k/include/asm/irq.h:66:20: warning: ‘struct pt_regs’ declared inside parameter list will not be visible outside of this definition or declaration 66 | struct pt_regs *)); | ^~~~~~~ arch/m68k/include/asm/irq.h:78:11: error: expected ‘;’ before ‘void’ 78 | asmlinkage void do_IRQ(int irq, struct pt_regs *regs); | ^~~~~ | ; arch/m68k/include/asm/irq.h:78:40: warning: ‘struct pt_regs’ declared inside parameter list will not be visible outside of this definition or declaration 78 | asmlinkage void do_IRQ(int irq, struct pt_regs *regs); | ^~~~~~~ arch/m68k/include/asm/irq.h:79:8: error: unknown type name ‘atomic_t’ 79 | extern atomic_t irq_err_count; | ^~~~~~~~ Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/5971770.lOV4Wx5bFT@eto.sf-tec.de Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-10-06m68k: sun3/3x: Add and use "sun3.h"Geert Uytterhoeven11-11/+36
When building with W=1: arch/m68k/sun3/idprom.c:86:6: warning: no previous prototype for ‘sun3_get_model’ [-Wmissing-prototypes] 86 | void sun3_get_model(char *model) | ^~~~~~~~~~~~~~ arch/m68k/sun3/config.c:53:24: warning: no previous prototype for ‘sun3_init’ [-Wmissing-prototypes] 53 | asmlinkage void __init sun3_init(void) | ^~~~~~~~~ arch/m68k/sun3/mmu_emu.c:117:6: warning: no previous prototype for ‘print_pte_vaddr’ [-Wmissing-prototypes] 117 | void print_pte_vaddr (unsigned long vaddr) | ^~~~~~~~~~~~~~~ arch/m68k/sun3/mmu_emu.c:126:13: warning: no previous prototype for ‘mmu_emu_init’ [-Wmissing-prototypes] 126 | void __init mmu_emu_init(unsigned long bootmem_end) | ^~~~~~~~~~~~ arch/m68k/sun3/mmu_emu.c:353:5: warning: no previous prototype for ‘mmu_emu_handle_fault’ [-Wmissing-prototypes] 353 | int mmu_emu_handle_fault (unsigned long vaddr, int read_flag, int kernel_fault) | ^~~~~~~~~~~~~~~~~~~~ arch/m68k/sun3/leds.c:6:6: warning: no previous prototype for ‘sun3_leds’ [-Wmissing-prototypes] 6 | void sun3_leds(unsigned char byte) | ^~~~~~~~~ arch/m68k/sun3/intersil.c:27:5: warning: no previous prototype for ‘sun3_hwclk’ [-Wmissing-prototypes] 27 | int sun3_hwclk(int set, struct rtc_time *t) | ^~~~~~~~~~ arch/m68k/sun3x/config.c:30:6: warning: no previous prototype for ‘sun3_leds’ [-Wmissing-prototypes] 30 | void sun3_leds(unsigned char byte) | ^~~~~~~~~ Fix this by introducing a new header file "sun3.h" for holding the prototypes of functions implemented in arch/m68k/sun3/ and arch/m68k/sun3x/. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/87856ef9ef8955f459fb691faca921c0a688bc80.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3x: Make dvma_print() staticGeert Uytterhoeven1-1/+1
There was never a user of dvma_print() outside arch/m68k/sun3x/dvma.c. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/0a038ac68ee553b1928a975dc0ae1c16803a0ac0.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3x: Make sun3x_halt() staticGeert Uytterhoeven1-1/+1
When building with W=1: arch/m68k/sun3x/prom.c:33:6: warning: no previous prototype for ‘sun3x_halt’ [-Wmissing-prototypes] 33 | void sun3x_halt(void) | ^~~~~~~~~~ Fix this by making sun3x_halt() static. The function body was moved to arch/m68k/sun3x/prom.c in v2.4.5.2. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/0ba2883aaff2e4fc5e570bfee87c58e483668b26.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3x: Do not mark dvma_map_iommu() inlineGeert Uytterhoeven1-2/+1
dvma_map_iommu() is called from the common Sun3/3x DVMA management code, but never from inside arch/m68k/sun3x/dvma.c. Hence it does not make sense to mark it inline. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/0884fd1f5d6775535bf20b13cc74283df4955e49.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3x: Fix signature of sun3_leds()Geert Uytterhoeven1-1/+1
The sun3_leds() implementation for Sun3 in arch/m68k/sun3/leds.c, and the prototype in arch/m68k/sun3/sun3ints.c take an "unsigned char", not an "int". Align the dummy implementation for Sun3x with the Sun3 variant and the common caller. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/5214afb67eac58b8adae5710aea0980c2644ff24.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3: Make sun3_platform_init() staticGeert Uytterhoeven1-1/+1
When building with W=1: arch/m68k/sun3/config.c:201:12: warning: no previous prototype for ‘sun3_platform_init’ [-Wmissing-prototypes] 202 | int __init sun3_platform_init(void) | ^~~~~~~~~~~~~~~~~~ Fix this by making sun3_platform_init() static. There was never a user outside arch/m68k/sun3/config.c. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/f35e6376d01b11f21f677cb980093e8410d2c33b.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3: Make print_pte() staticGeert Uytterhoeven1-1/+1
When building with W=1: arch/m68k/sun3/mmu_emu.c:70:6: warning: no previous prototype for ‘print_pte’ [-Wmissing-prototypes] 70 | void print_pte (pte_t pte) | ^~~~~~~~~ Fix this by making print_pte() static. There was never a user outside arch/m68k/sun3/mmu_emu.c. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/a56c70e85584efb3681cb7e94aff167299dfa5e4.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3: Annotate prom_printf() with __printf()Geert Uytterhoeven1-1/+3
When building with W=1: arch/m68k/sun3/prom/printf.c: In function ‘prom_printf’: arch/m68k/sun3/prom/printf.c:35:9: warning: function ‘prom_printf’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] 35 | vsprintf(ppbuf, fmt, args); | ^~~~~~~~ Fix this by annotating prom_printf() with __printf(1, 2). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/61017c012617e6f633ac9f9a3c2659ae38e1f2fb.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3: Remove unused vsprintf() return value in prom_printf()Geert Uytterhoeven1-3/+2
When building with W=1: arch/m68k/sun3/prom/printf.c: In function ‘prom_printf’: arch/m68k/sun3/prom/printf.c:28:13: warning: variable ‘i’ set but not used [-Wunused-but-set-variable] 28 | int i; | ^ As the return value of vsprintf() is unused, and serves no practical purpose here, fix this by removing the variable. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/94a1e61b1651ff05f4a59655d9b8c1ac5338f60c.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3: Remove unused start_page in sun3_bootmem_alloc()Geert Uytterhoeven1-3/+0
When building with W=1: arch/m68k/sun3/config.c: In function ‘sun3_bootmem_alloc’: arch/m68k/sun3/config.c:110:23: warning: variable ‘start_page’ set but not used [-Wunused-but-set-variable] 112 | unsigned long start_page; | ^~~~~~~~~~ Fix this by removing the variable and the assignment, now the last user is gone. Fixes: 1008a11590b966b4 ("m68k: switch to MEMBLOCK + NO_BOOTMEM") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/361c4562350c8739f6c0da34f7c416b2678fae7c.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3: Remove unused orig_baddr in free_baddr()Geert Uytterhoeven1-2/+0
When building with W=1: arch/m68k/sun3/sun3dvma.c: In function ‘free_baddr’: arch/m68k/sun3/sun3dvma.c:208:23: warning: variable ‘orig_baddr’ set but not used [-Wunused-but-set-variable] 196 | unsigned long orig_baddr; | ^~~~~~~~~~ Fix this by removing the unused variable and assignment, which were futile since their introduction in v2.4.5.2. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/c705b6186241dfe9a5bdcb71720b8697fa5c801f.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3: Add missing asmlinkage to sun3_init()Geert Uytterhoeven1-1/+2
sun3_init() is called from assembly code, so it should be marked asmlinkage for documentation purposes. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/9a174020de2c55e108be9bd25fcdec3e48d655c4.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3: Fix signature of sun3_get_model()Geert Uytterhoeven1-1/+1
The mach_get_model() callback takes a "char *", not an "unsigned char *". Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/c635afb4542ab54c3dbd4fa2fbed07a2665a2f4e.1694613528.git.geert@linux-m68k.org
2023-10-06m68k: sun3: Fix context restore in flush_tlb_range()Geert Uytterhoeven1-0/+1
When building with W=1: In file included from arch/m68k/kernel/traps.c:42: arch/m68k/include/asm/tlbflush.h: In function ‘flush_tlb_range’: arch/m68k/include/asm/tlbflush.h:191:28: warning: variable ‘oldctx’ set but not used [-Wunused-but-set-variable] 191 | unsigned char seg, oldctx; | ^~~~~~ Indeed, the old context is saved, but never restored. Fix this by adding the missing call to sun3_put_context(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/ea859b7850e061e0f7fb3fca64d9f8e6d1c0d2ad.1694613528.git.geert@linux-m68k.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 12:08:50 +0000