summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2017-01-19ARM: dts: da850-evm: fix read access to SPI flashFabien Parent1-0/+1
Read access to the SPI flash are broken on da850-evm, i.e. the data read is not what is actually programmed on the flash. According to the datasheet for the M25P64 part present on the da850-evm, if the SPI frequency is higher than 20MHz then the READ command is not usable anymore and only the FAST_READ command can be used to read data. This commit specifies in the DTS that we should use FAST_READ command instead of the READ command. Cc: stable@vger.kernel.org Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Fabien Parent <fparent@baylibre.com> [nsekhar@ti.com: subject line adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-18Merge tag 'omap-for-v4.10/fixes-rc4' of ↵Olof Johansson5-10/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.10-rc cycle. Mostly a DMA regression fix for omap1, and then a handful of trivial fixes for boards and devices to work: - Fixes TI wilink bluetooth strange platform data baud rate - Remove duplicate pinmux line for am335x-icev2 - Fix omap1 dma regression - Fix uninitialized return value for wkup_m3_ipc_probe() - Fix Ethernet PHY binding typo for dra72-evm - Fix init for omap5 and dra7 sata ports - Fix mmc card detect pin for Logic PD SOM-LV * tag 'omap-for-v4.10/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available. ARM: dts: dra72-evm-revc: fix typo in ethernet-phy node soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe() ARM: OMAP1: DMA: Correct the number of logical channels ARM: dts: am335x-icev2: Remove the duplicated pinmux setting ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-17ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LVAdam Ford1-8/+3
This fixes commit ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") where the Card Detect and Write Protect pins were improperly configured. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-16Merge tag 'arm-soc/for-4.10/devicetree-fixes' of ↵Olof Johansson1-1/+1
http://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom ARM-based SoC Device Tree fixes for v4.10, please pull the following: - Jon fixes an invalid value for the "ranges" property of the bus nodes on NorthStar Plus SoCs * tag 'arm-soc/for-4.10/devicetree-fixes' of http://github.com/Broadcom/stblinux: ARM: dts: NSP: Fix DT ranges error Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16Merge tag 'sunxi-fixes-for-4.10' of ↵Olof Johansson4-1/+7
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.10 A few fixes here and there to enable the build of some DT leftover, prevent display issues or setup a proper muxing. * tag 'sunxi-fixes-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sunxi: Change node name for pwrseq pin on Olinuxino-lime2-emmc ARM: dts: sun8i: Support DTB build for NanoPi M1 ARM: dts: sun6i: hummingbird: Enable display engine again ARM: dts: sun6i: Disable display pipeline by default Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16Merge tag 'imx-fixes-4.10-2' of ↵Olof Johansson2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.10, 2nd round: - A couple of Nitrogen6 device tree fixes for audio codec probe failure, which is caused by that pinctrl setting for codec clock was not in the correct device node. * tag 'imx-fixes-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl init ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl init Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-13ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.Jean-Jacques Hiblot2-0/+2
AHCI provides the register PORTS_IMPL to let the software know which port is supported. The register must be initialized by the bootloader. However in some cases u-boot doesn't properly initialize this value (if it is not compiled with SATA support for example or if the SATA initialization fails). The DTS entry "ports-implemented" can be used to override the value in PORTS_IMPL. Without this patch the SATA will not work in the following two cases: * if there has been a failure to initialize SATA in u-boot. * if ahci_platform module has been removed and re-inserted. The reason is that the content of PORTS_IMPL is lost after the module is removed. I suspect that it's because the controller is reset by the hwmod. Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> [tony@atomide.com: updated comments with what goes wrong] Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-12ARM: dts: NSP: Fix DT ranges errorJon Mason1-1/+1
The range size for axi is 0x2 bytes too small, as the QSPI needs 0x11c408 + 0x004 (which is 0x0011c40c, not 0x0011c40a). No errors have been observed with this shortcoming, but fixing it for correctness. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-12ARM: dts: dra72-evm-revc: fix typo in ethernet-phy nodeSekhar Nori1-1/+1
Fix a typo in impedance setting for ethernet-phy@3 Fixes: b76db38cd8ae ("ARM: dts: dra72-evm-revc: add phy impedance settings") Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-10ARM: dts: sunxi: Change node name for pwrseq pin on Olinuxino-lime2-emmcEmmanuel Vadot1-1/+1
The node name for the power seq pin is mmc2@0 like the mmc2_pins_a one. This makes the original node (mmc2_pins_a) scrapped out of the dtb and result in a unusable eMMC if U-Boot didn't configured the pins to the correct functions. Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-10ARM: dts: sun8i: Support DTB build for NanoPi M1Milo Kim1-0/+1
The commit 10efbf5f1633 ("ARM: dts: sun8i: Add dts file for NanoPi M1 SBC") introduced NanoPi M1 board but it's missing in Allwinner H3 DTB build. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-10ARM: dts: sun6i: hummingbird: Enable display engine againChen-Yu Tsai1-0/+4
Now that we disable the display engine by default, we need to re-enable it for the Hummingbird A31, which already had its display pipeline enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-10ARM: dts: sun6i: Disable display pipeline by defaultChen-Yu Tsai1-0/+1
While we now support the internal display pipeline found on sun6i, it is possible that we are unable to enable the display for some boards, due to a lack of drivers for the panels or bridges found on them. If the display pipeline is enabled, the driver will try to enable, and possibly screw up the simple framebuffer U-boot had configured. Disable the display pipeline by default. Fixes: 6d0e5b70be13 ("ARM: dts: sun6i: Add device nodes for first display pipeline") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-09ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus" part 3Masahiro Yamada1-1/+1
Tree-wide replacement was done by commit 2ef7d5f342c1 ("ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"), then the 2nd round by commit 15b7cc78f095 ("arm64: dts: drop "arm,amba-bus" in favor of "simple-bus" part 2"). Here, some new users have appeared for Linux v4.10-rc1. Eliminate them now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-10ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl initGary Bisson1-2/+2
Since the codec is probed first, the pinctrl node should be under the codec node. The codec init was working for this board since U-Boot was already setting GPIO_0 as CLKO1 but better fix it anyway. Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support") Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-10ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl initGary Bisson1-2/+2
This patch fixes the following error: sgtl5000 0-000a: Error reading chip id -6 imx-sgtl5000 sound: ASoC: CODEC DAI sgtl5000 not registered imx-sgtl5000 sound: snd_soc_register_card failed (-517) The problem was that the pinctrl group was linked to the sound driver instead of the codec node. Since the codec is probed first, the sys_mclk was missing and it would therefore fail to initialize. Fixes: b32e700256bc ("ARM: dts: imx: add Boundary Devices Nitrogen6_Max board") Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-05ARM: dts: am335x-icev2: Remove the duplicated pinmux settingLokesh Vutla1-1/+0
There is no mmc sd card detect on am335x-ice board. But the spi0_cs1 pin being configured as mmcsd_cd. Removing it fixes the below warning during boot: pinctrl-single 44e10800.pinmux: pin 44e10960.0 already requested by 48030000.spi; cannot claim for 48060000.mmc Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [tony@atomide.com: tidied up commit message] Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-04Merge tag 'vexpress-fixes-4.10' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes Pull "ARMv7 VExpress fixes for v4.10" from Sudeep Holla: A simple fix to extend GICv2 CPU interface registers from 4K to 8K on VExpress TC1 and TC2 platforms in order to support split priority drop and interrupt deactivation. * tag 'vexpress-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: ARM: dts: vexpress: Support GICC_DIR operations
2017-01-04Merge tag 'imx-fixes-4.10' of ↵Arnd Bergmann6-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 4.10" from Shawn Guo: - A format fix for vf610-zii-dev-rev-b.dts, which has a very odd line due to misses a newline. - A fix to imx-weim bus error seen on board which doesn't actually use the bus. - A fix for imx6qdl-nitrogen6x board which has conflicting usage of pad NANDF_CS2. - A cleanup on i.MX1 machine to remove .map_io callback, which also fixes a compiling error for NOMMU build. - Fix AVIC base address in i.MX31 device tree source. The problem was shadowed by the AVIC driver, which takes the correct base address from a SoC specific header file. * tag 'imx-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6: Disable "weim" node in the dtsi files ARM: i.MX: remove map_io callback ARM: dts: vf610-zii-dev-rev-b: Add missing newline ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry ARM: dts: imx31: fix AVIC base address
2017-01-04Merge tag 'qcom-arm-fixes-for-4.10-rc2' of ↵Arnd Bergmann1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Pull "Qualcomm ARM DTS Fixes for v4.10-rc2" from Andy Gross: * Add SCM clock for APQ8064 to fix boot failures * tag 'qcom-arm-fixes-for-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: apq8064: Add missing scm clock
2017-01-03ARM: dts: imx6: Disable "weim" node in the dtsi filesFabio Estevam3-0/+3
Commit 1be81ea5860744520 ("ARM: dts: imx6: Add imx-weim parameters to dtsi's") causes the following probe error when the weim node is not present on the board dts (such as imx6q-sabresd): imx-weim 21b8000.weim: Invalid 'ranges' configuration imx-weim: probe of 21b8000.weim failed with error -22 There is no need to always enable the "weim" node on mx6. Do the same as in the other i.MX dtsi files where "weim" is disabled and only gets enabled on a per dts basis. All the imx6 weim dts users explicitily provide 'status = "okay"', so this change has no impact on current imx6 weim users. If a board does not use the weim driver it will not describe its 'ranges' property, so simply disable the 'weim' node in the imx6 dtsi files to avoid such probe error message. Fixes: 1be81ea5860744520 ("ARM: dts: imx6: Add imx-weim parameters to dtsi's") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-02ARM: dts: qcom: apq8064: Add missing scm clockBjorn Andersson1-0/+4
As per the device tree binding the apq8064 scm node requires the core clock to be specified, so add this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-02ARM: dts: vf610-zii-dev-rev-b: Add missing newlineAndreas Färber1-1/+2
Found while reviewing Marvell dsa bindings usage. Fixes: f283745b3caf ("arm: vf610: zii devel b: Add support for switch interrupts") Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-02ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entryGary Bisson1-1/+0
The NANDF_CS2 pad is also part of the wlan-vmmcgrp iomux group. Removing is from the usdhc2grp group avoids the following error: imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_NANDF_CS2 already requested by regulators:regulator@4; cannot claim for 2194000.usdhc imx6q-pinctrl 20e0000.iomuxc: pin-187 (2194000.usdhc) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 187 (MX6Q_PAD_NANDF_CS2) from group usdhc2grp on device 20e0000.iomuxc Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-02ARM: dts: imx31: fix AVIC base addressVladimir Zapolskiy1-2/+2
On i.MX31 AVIC interrupt controller base address is at 0x68000000. The problem was shadowed by the AVIC driver, which takes the correct base address from a SoC specific header file. Fixes: d2a37b3d91f4 ("ARM i.MX31: Add devicetree support") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-12-30ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETnKishon Vijay Abraham I1-0/+4
Add 'gpios' property to pcie1 dt node and populate it with GPIO3_23 in order to drive PCIE_RESETn high. This gets PCIe cards to be detected in AM572X IDK board. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-30ARM: dts: vexpress: Support GICC_DIR operationsChristoffer Dall2-2/+2
The GICv2 CPU interface registers span across 8K, not 4K as indicated in the DT. Only the GICC_DIR register is located after the initial 4K boundary, leaving a functional system but without support for separately EOI'ing and deactivating interrupts. After this change the system supports split priority drop and interrupt deactivation. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> [sudeep.holla@arm.com: included same fix for tc1 platform too] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-12-27ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flagsPali Rohár1-0/+2
Trying to initialize eMMC slot as SDIO or SD cause failure in n900 port of qemu. eMMC itself is not detected and is not working. Real Nokia N900 harware does not have this problem. As eMMC is really not SDIO or SD based such change is harmless and will fix support for qemu. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: dra72-evm-tps65917: Add voltage supplies to usb_phy, mmc, dssLokesh Vutla1-0/+16
Commit 5d080aa30681 ("ARM: dts: dra72: Add separate dtsi for tps65917") added a separate dtsi for dra72-evm-tps65917 moving all the voltage supplies to this file. But it missed adding voltage supplies to usb_phy, mmc, dss and deleted from dra72-evm-common.dtsi. Adding the voltage supply phandles to these nodes in dra72-evm-tps65917.dtsi Fixes: 5d080aa30681 ("ARM: dts: dra72: Add separate dtsi for tps65917") Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: am57xx-idk: Put USB2 port in peripheral modeRoger Quadros1-1/+1
USB2 port can be operated in dual-role mode but till we have dual-role support in dwc3 driver let's limit this port to peripheral mode. If we don't do so it defaults to host mode. USB1 port is meant for host only operation and we don't want both ports in host only mode. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: am57xx-idk: Support VBUS detection on USB2 portRoger Quadros3-10/+17
VBUS detection is available on the board via the palmas PMIC. Use extcon-palmas driver instead of extcon-gpio-usb driver. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27dt-bindings: mfd: Remove TPS65217 interruptsMilo Kim1-5/+3
Interrupt numbers are from the datasheet, so no need to keep them in the ABI. Use the number in the DT file. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: am335x: Fix the interrupt name of TPS65217Milo Kim1-1/+1
Use 'interrupt-names' for getting the charger interrupt number. Fixes: 1934e89a769b ("ARM: dts: am335x: Add the charger interrupt") Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: omap3: Add DTS for Logic PD SOM-LV 37xx Dev KitAdam Ford1-0/+1
Fixes: ("ab8dd3aed011 ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") This adds the dts file into the Makefile. This should have been included in the original patch. V2: Update patch description - same source code V1: Original patch Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: dra7: Add an empty chosen node to top level DTSIJavier Martinez Canillas1-0/+1
Commit 55871eb6e2cc ("ARM: dts: dra7: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 55871eb6e2cc ("ARM: dts: dra7: Remove skeleton.dtsi usage") Reported-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: dm816x: Add an empty chosen node to top level DTSIJavier Martinez Canillas1-0/+1
Commit 06bfb9c19957 ("ARM: dts: dm816x: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 06bfb9c19957 ("ARM: dts: dm816x: Remove skeleton.dtsi usage") Reported-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: dm814x: Add an empty chosen node to top level DTSIJavier Martinez Canillas1-0/+1
Commit 76155b378c59 ("ARM: dts: dm814x: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 76155b378c59 ("ARM: dts: dm814x: Remove skeleton.dtsi usage") Reported-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: am4372: Add an empty chosen node to top level DTSIJavier Martinez Canillas1-0/+1
Commit 75813028bbd7 ("ARM: dts: am4372: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 75813028bbd7 ("ARM: dts: am4372: Remove skeleton.dtsi usage") Reported-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: am33xx: Add an empty chosen node to top level DTSIJavier Martinez Canillas1-0/+1
Commit f8bf01611c99 ("ARM: dts: am33xx: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: f8bf01611c99 ("ARM: dts: am33xx: Remove skeleton.dtsi usage") Reported-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: omap5: Add an empty chosen node to top level DTSIJavier Martinez Canillas1-0/+1
Commit 76a8548ea987 ("ARM: dts: omap5: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 76a8548ea987 ("ARM: dts: omap5: Remove skeleton.dtsi usage") Reported-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: omap4: Add an empty chosen node to top level DTSIJavier Martinez Canillas1-0/+1
Commit da6269e7e3dd ("ARM: dts: omap4: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: da6269e7e3dd ("ARM: dts: omap4: Remove skeleton.dtsi usage") Reported-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: omap3: Add an empty chosen node to top level DTSIJavier Martinez Canillas1-0/+1
Commit 008a2ebcd677 ("ARM: dts: omap3: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: 008a2ebcd677 ("ARM: dts: omap3: Remove skeleton.dtsi usage") Reported-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: omap2: Add an empty chosen node to top level DTSIJavier Martinez Canillas1-0/+1
Commit d1f3156fc8c7 ("ARM: dts: omap2: Remove skeleton.dtsi usage") removed the skeleton.dtsi usage since we want to get rid of it. But this can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Fixes: d1f3156fc8c7 ("ARM: dts: omap2: Remove skeleton.dtsi usage") Reported-by: Pali Rohar <pali.rohar@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-20ARM: dts: hix5hd2: don't change the existing compatible stringDongpo Li1-2/+2
The SoC hix5hd2 compatible string has the suffix "-gmac" and we should not change it. We should only add the generic compatible string "hisi-gmac-v1". Fixes: 0855950ba580 ("ARM: dts: hix5hd2: add gmac generic compatible and clock names") Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-15Merge tag 'armsoc-dt' of ↵Linus Torvalds387-7965/+18082
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "Lots of changes as usual, so I'm trying to be brief here. Most of the new hardware support has the respective driver changes merged through other trees or has had it available for a while, so this is where things come together. We get a DT descriptions for a couple of new SoCs, all of them variants of other chips we already support, and usually coming with a new evaluation board: - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices - Qualcomm MDM9615 LTE baseband - NXP imx6ull, the latest and smallest i.MX6 application processor variant - Renesas RZ/G (r8a7743 and r8a7745) application processors - Rockchip PX3, a variant of the rk3188 chip used in Android tablets - Rockchip rk1108 single-core application processor - ST stm32f746 Cortex-M7 based microcontroller - TI DRA71x automotive processors These are commercially available consumer platforms we now support: - Motorola Droid 4 (xt894) mobile phone - Rikomagic MK808 Android TV stick based on Rockchips rx3066 - Cloud Engines PogoPlug v3 based on OX820 - Various Broadcom based wireless devices: - Netgear R8500 router - Tenda AC9 router - TP-LINK Archer C9 V1 - Luxul XAP-1510 Access point - Turris Omnia open hardware router based on Armada 385 And a couple of new boards targeted at developers, makers or industrial integration: - Macnica Sodia development platform for Altera socfpga (Cyclone V) - MicroZed board based on Xilinx Zynq FPGA platforms - TOPEET itop/elite based on exynos4412 - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615 - NextThing CHIP Pro gadget - NanoPi M1 development board - AM571x-IDK industrial board based on TI AM5718 - i.MX6SX UDOO Neo - Boundary Devices Nitrogen6_SOM2 (i.MX6) - Engicam i.CoreM6 - Grinn i.MX6UL liteSOM/liteBoard - Toradex Colibri iMX6 module Other changes: - added peripherals on renesas, davinci, stm32f429, uniphier, sti, mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm, mvebu, allwinner, broadcom, exynos, zynq - Continued fixes for W=1 dtc warnings - The old STiH415/416 SoC support gets removed, these never made it into products and have served their purpose in the kernel as a template for teh newer chips from ST - The exynos4415 dtsi file is removed as nothing uses it. - Intel PXA25x can now be booted using devicetree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits) arm: dts: zynq: Add MicroZed board support ARM: dts: da850: enable high speed for mmc ARM: dts: da850: Add node for pullup/pulldown pinconf ARM: dts: da850: enable memctrl and mstpri nodes per board ARM: dts: da850-lcdk: Add ethernet0 alias to DT ARM: dts: artpec: add pcie support ARM: dts: add support for Turris Omnia devicetree: Add vendor prefix for CZ.NIC ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node ARM: dts: berlin2q-marvell-dmp: fix regulators' name ARM: dts: Add xo to sdhc clock node on qcom platforms ARM: dts: r8a7794: Add device node for PRR ARM: dts: r8a7793: Add device node for PRR ARM: dts: r8a7792: Add device node for PRR ARM: dts: r8a7791: Add device node for PRR ARM: dts: r8a7790: Add device node for PRR ARM: dts: r8a7779: Add device node for PRR ARM: dts: r8a73a4: Add device node for PRR ARM: dts: sk-rzg1e: add Ether support ARM: dts: sk-rzg1e: initial device tree ...
2016-12-15Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds4-12/+25
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Arnd Bergmann: "As usual, we queue up a few fixes that don't seem urgent enough to go in through -rc, or that just came a little too late given their size. The zx fixes make the platform finally boot on real hardware, the davinci and imx31 get the DT support working better for some of the machines that are still normally used with classic board files. One tegra fix is important for new bootloader versions, but the bug has been around for a while without anyone noticing. The other changes are mostly cosmetic" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) arm64: tegra: Add missing Smaug revision arm64: tegra: Add VDD_GPU regulator to Jetson TX1 arm64: dts: zte: clean up gic-v3 redistributor properties arm64: dts: zx: Fix gic GICR property bus: vexpress-config: fix device reference leak soc: ti: qmss: fix the case when !SMP ARM: lpc32xx: drop duplicate header device.h ARM: ixp4xx: drop duplicate header gpio.h ARM: socfpga: fix spelling mistake in error message ARM: dts: imx6q-cm-fx6: fix fec pinctrl ARM: dts: imx7d-pinfunc: fix UART pinmux defines ARM: dts: imx6qp: correct LDB clock inputs ARM: OMAP2+: pm-debug: Use seq_putc() in two functions ARM: OMAP2+: Remove the omapdss_early_init_of() function mfd: tps65217: Fix mismatched interrupt number ARM: zx: Fix error handling ARM: spear: Fix error handling ARM: davinci: da850: Fix pwm name matching ARM: clk: imx31: properly init clocks for machines with DT clk: imx31: fix rewritten input argument of mx31_clocks_init() ...
2016-12-14Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-0/+2
Pull dmaengine updates from Vinod Koul: "Fairly routine update this time around with all changes specific to drivers: - New driver for STMicroelectronics FDMA - Memory-to-memory transfers on dw dmac - Support for slave maps on pl08x devices - Bunch of driver fixes to use dma_pool_zalloc - Bunch of compile and warning fixes spread across drivers" [ The ST FDMA driver already came in earlier through the remoteproc tree ] * tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: sirf-dma: remove unused ‘sdesc’ dmaengine: pl330: remove unused ‘regs’ dmaengine: s3c24xx: remove unused ‘cdata’ dmaengine: stm32-dma: remove unused ‘src_addr’ dmaengine: stm32-dma: remove unused ‘dst_addr’ dmaengine: stm32-dma: remove unused ‘sfcr’ dmaengine: pch_dma: remove unused ‘cookie’ dmaengine: mic_x100_dma: remove unused ‘data’ dmaengine: img-mdc: remove unused ‘prev_phys’ dmaengine: usb-dmac: remove unused ‘uchan’ dmaengine: ioat: remove unused ‘res’ dmaengine: ioat: remove unused ‘ioat_dma’ dmaengine: ioat: remove unused ‘is_raid_device’ dmaengine: pl330: do not generate unaligned access dmaengine: k3dma: move to dma_pool_zalloc dmaengine: at_hdmac: move to dma_pool_zalloc dmaengine: at_xdmac: don't restore unsaved status dmaengine: ioat: set error code on failures dmaengine: ioat: set error code on failures dmaengine: DW DMAC: add multi-block property to device tree ...
2016-12-13Merge tag 'usb-4.10-rc1' of ↵Linus Torvalds3-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here's the big set of USB/PHY patches for 4.10-rc1. A number of new drivers are here in this set of changes. We have a new USB controller type "mtu3", a new usb-serial driver, and the usual churn in the gadget subsystem and the xhci host controller driver, along with a few other new small drivers added. And lots of little other changes all over the USB and PHY driver tree. Full details are in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (309 commits) USB: serial: option: add dlink dwm-158 USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041 USB: OHCI: nxp: fix code warnings USB: OHCI: nxp: remove useless extern declaration USB: OHCI: at91: remove useless extern declaration usb: misc: rio500: fix result type for error message usb: mtu3: fix U3 port link issue usb: mtu3: enable auto switch from U3 to U2 usbip: fix warning in vhci_hcd_probe/lockdep_init_map usb: core: usbport: Use proper LED API to fix potential crash usbip: add missing compile time generated files to .gitignore usb: hcd.h: construct hub class request constants from simpler constants USB: OHCI: ohci-pxa27x: remove useless functions USB: OHCI: omap: remove useless extern declaration USB: OHCI: ohci-omap: remove useless functions USB: OHCI: ohci-s3c2410: remove useless functions USB: cdc-acm: add device id for GW Instek AFG-125 fsl/usb: Workarourd for USB erratum-A005697 usb: hub: Wait for connection to be reestablished after port reset usbip: vudc: Refactor init_vudc_hw() to be more obvious ...
2016-12-13Merge tag 'clk-for-linus' of ↵Linus Torvalds7-0/+35
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This is a fairly quiet release. We don't have any patches to the core framework. The only patch that can even be considered "core" adds another clk_get() variant. The rest of the changes are in drivers for various SoCs, and we have a few bits for ARM shmobile architecture code (dts and mach) due to the dependency we're breaking between shmobile architecture code and its clk driver. Those shmobile bits have also been pulled into arm-soc tree. Here's the summary: Core: - Support for devm_get_clk_from_child() used with DT bindings that have subnodes with the 'clocks' property New Drivers: - Allwinner A64 (sun50i) - i.MX imx6ull - Socionext's UniPhier SoC CPUs - Mediatek MT2701 SoCs - Rockchip rk1108 SoCs - Qualcomm MSM8994/MSM8992 SoCS - Qualcomm RPM Clocks - Hisilicon Hi3516CV300 and Hi3798CV200 CRG - Oxford Semiconductor OX820 and OX810SE SoCs - Renesas RZ/G1M and RZ/GIE SoCs - Renesas R-Car RST driver for mode pin states Updates: - Four Allwinner SoCs are migrated to the new style clk driver - Rockchip rk3399,rk3066 PLL optimizations - i.MX LVDS display glitch fixes and AV PLL precision improvements - Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL support - Explicit demodularization of always builtin drivers - Freescale Qoriq ls1012a and ls1046a support - Exynos 5433 parent typo fix and critical clock tagging - Renesas r8a7743/r8a7745 CPG - Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support - stm32f4* LSI, LSE, RTC, and QSPI clocks - pxa27x and pxa25x cpufreq as clks - TI omap36xx sprz319 advisory 2.1 workaround - Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate() clk: add devm_get_clk_from_child() API clk: st: clk-flexgen: Unmap region obtained by of_iomap clk: keystone: pll: Unmap region obtained by of_iomap clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc clk: cdce925: Fix limit check clk: bcm: Make COMMON_CLK_IPROC into a library clk: qoriq: added ls1012a clock configuration clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock clk: bcm: Support rate change propagation on bcm2835 clocks clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk clk: ti: omap36xx: Work around sprz319 advisory 2.1 clk: clk-wm831x: fix a logic error clk: uniphier: add cpufreq data for LD11, LD20 SoCs clk: uniphier: add CPU-gear change (cpufreq) support clk: qcom: Put venus core0/1 gdscs to hw control mode clk: qcom: gdsc: Add support for gdscs with HW control ...
2016-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-4/+7
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 23:22:01 +0000