summaryrefslogtreecommitdiff
path: root/Documentation/networking/devlink
AgeCommit message (Collapse)AuthorFilesLines
2023-08-27devlink: Expose port function commands to control IPsec crypto offloadsDima Chumak1-0/+27
Expose port function commands to enable / disable IPsec crypto offloads, this is used to control the port IPsec capabilities. When IPsec crypto is disabled for a function of the port (default), function cannot offload any IPsec crypto operations (Encrypt/Decrypt and XFRM state offloading). When enabled, IPsec crypto operations can be offloaded by the function of the port. Example of a PCI VF port which supports IPsec crypto offloads: $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto disable $ devlink port function set pci/0000:06:00.0/1 ipsec_crypto enable $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto enable Signed-off-by: Dima Chumak <dchumak@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230825062836.103744-2-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14net/mlx5e: Add recovery flow for tx devlink health reporter for unhealthy PTP SQRahul Rameshbabu1-1/+4
A new check for the tx devlink health reporter is introduced for determining when the PTP port timestamping SQ is considered unhealthy. If there are enough CQEs considered never to be delivered, the space that can be utilized on the SQ decreases significantly, impacting performance and usability of the SQ. The health reporter is triggered when the number of likely never delivered port timestamping CQEs that utilize the space of the PTP SQ is greater than 93.75% of the total capacity of the SQ. A devlink health reporter recover method is also provided for this specific TX error context that restarts the PTP SQ. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-08-14net/mlx5: Consolidate devlink documentation in devlink/mlx5.rstRahul Rameshbabu1-0/+179
De-duplicate documentation by removing mellanox/mlx5/devlink.rst. Instead, only use the generic devlink documentation directory to document mlx5 devlink parameters. Avoid providing general devlink tool usage information in mlx5-specific documentation. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+15
Adjacent changes: net/mptcp/protocol.h 63740448a32e ("mptcp: fix accept vs worker race") 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-17ice: document RDMA devlink parametersJacob Keller1-0/+15
Commit e523af4ee560 ("net/ice: Add support for enable_iwarp and enable_roce devlink param") added support for the enable_roce and enable_iwarp parameters in the ice driver. It didn't document these parameters in the ice devlink documentation file. Add this documentation, including a note about the mutual exclusion between the two modes. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15net/mlx5e: Add devlink hairpin queues parametersGal Pressman1-0/+12
We refer to a TC NIC rule that involves forwarding as "hairpin". Hairpin queues are mlx5 hardware specific implementation for hardware forwarding of such packets. Per the discussion in [1], move the hairpin queues control (number and size) from debugfs to devlink. Expose two devlink params: - hairpin_num_queues: control the number of hairpin queues - hairpin_queue_size: control the size (in packets) of the hairpin queues [1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/ Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-12-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-16sfc: add devlink info support for ef100Alejandro Lucero2-0/+58
Add devlink info support for ef100. The information reported is obtained through the MCDI interface with the specific meaning defined in new documentation file. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-15Merge tag 'mlx5-updates-2023-02-10' of ↵Jakub Kicinski1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-02-10 1) From Roi and Mark: MultiPort eswitch support MultiPort E-Switch builds on newer hardware's capabilities and introduces a mode where a single E-Switch is used and all the vports and physical ports on the NIC are connected to it. The new mode will allow in the future a decrease in the memory used by the driver and advanced features that aren't possible today. This represents a big change in the current E-Switch implantation in mlx5. Currently, by default, each E-Switch manager manages its E-Switch. Steering rules in each E-Switch can only forward traffic to the native physical port associated with that E-Switch. While there are ways to target non-native physical ports, for example using a bond or via special TC rules. None of the ways allows a user to configure the driver to operate by default in such a mode nor can the driver decide to move to this mode by default as it's user configuration-driven right now. While MultiPort E-Switch single FDB mode is the preferred mode, older generations of ConnectX hardware couldn't support this mode so it was never implemented. Now that there is capable hardware present, start the transition to having this mode by default. Introduce a devlink parameter to control MultiPort Eswitch single FDB mode. This will allow users to select this mode on their system right now and in the future will allow the driver to move to this mode by default. 2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic 2.1) Cleanups related to mlx5's devlink port logic 2.2) Move devlink port registration to be done before netdev alloc 2.3) Create auxdev devlink instance in the same ns as parent devlink 2.4) Suspend auxiliary devices only in case of PCI device suspend * tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Suspend auxiliary devices only in case of PCI device suspend net/mlx5: Remove "recovery" arg from mlx5_load_one() function net/mlx5e: Create auxdev devlink instance in the same ns as parent devlink net/mlx5e: Move devlink port registration to be done before netdev alloc net/mlx5e: Move dl_port to struct mlx5e_dev net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_port net/mlx5e: Pass mdev to mlx5e_devlink_port_register() net/mlx5: Remove outdated comment net/mlx5e: TC, Remove redundant parse_attr argument net/mlx5e: Use a simpler comparison for uplink rep net/mlx5: Lag, Add single RDMA device in multiport mode net/mlx5: Lag, set different uplink vport metadata in multiport eswitch mode net/mlx5: E-Switch, rename bond update function to be reused net/mlx5e: TC, Add peer flow in mpesw mode net/mlx5: Lag, Control MultiPort E-Switch single FDB mode ==================== Link: https://lore.kernel.org/r/20230214221239.159033-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15devlink: Update devlink health documentationMoshe Shemesh1-2/+21
Update devlink-health.rst file: - Add devlink formatted message (fmsg) API documentation. - Add auto-dump as a condition to do dump once error reported. - Expand OOB to clarify this acronym. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14net/mlx5: Lag, Control MultiPort E-Switch single FDB modeRoi Dayan1-0/+18
MultiPort E-Switch builds on newer hardware's capabilities and introduces a mode where a single E-Switch is used and all the vports and physical ports on the NIC are connected to it. The new mode will allow in the future a decrease in the memory used by the driver and advanced features that aren't possible today. This represents a big change in the current E-Switch implantation in mlx5. Currently, by default, each E-Switch manager manages its E-Switch. Steering rules in each E-Switch can only forward traffic to the native physical port associated with that E-Switch. While there are ways to target non-native physical ports, for example using a bond or via special TC rules. None of the ways allows a user to configure the driver to operate by default in such a mode nor can the driver decide to move to this mode by default as it's user configuration-driven right now. While MultiPort E-Switch single FDB mode is the preferred mode, older generations of ConnectX hardware couldn't support this mode so it was never implemented. Now that there is capable hardware present, start the transition to having this mode by default. Introduce a devlink parameter to control MultiPort E-Switch single FDB mode. This will allow users to select this mode on their system right now and in the future will allow the driver to move to this mode by default. Example: $ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \ cmode runtime Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-31Documentation: networking: correct spellingRandy Dunlap3-4/+4
Correct spelling problems for Documentation/networking/ as reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Jiri Pirko <jiri@nvidia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20230129231053.20863-5-rdunlap@infradead.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-19Documentation: devlink: add missing toc entry for etas_es58x devlink docVincent Mailhol1-0/+1
toc entry is missing for etas_es58x devlink doc and triggers this warning: Documentation/networking/devlink/etas_es58x.rst: WARNING: document isn't included in any toctree Add the missing toc entry. Fixes: 9f63f96aac92 ("Documentation: devlink: add devlink documentation for the etas_es58x driver") Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20221213051136.721887-1-mailhol.vincent@wanadoo.fr Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-12-12Documentation: devlink: add devlink documentation for the etas_es58x driverVincent Mailhol1-0/+36
List all the version information reported by the etas_es58x driver through devlink. Also, update MAINTAINERS with the newly created file. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20221130174658.29282-8-mailhol.vincent@wanadoo.fr [mkl: fixed version information table: "bl" -> "fw.bootloader" Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-12-12net: devlink: add DEVLINK_INFO_VERSION_GENERIC_FW_BOOTLOADERVincent Mailhol1-0/+5
As discussed in [1], abbreviating the bootloader to "bl" might not be well understood. Instead, a bootloader technically being a firmware, name it "fw.bootloader". Add a new macro to devlink.h to formalize this new info attribute name and update the documentation. [1] https://lore.kernel.org/netdev/20221128142723.2f826d20@kernel.org/ Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20221130174658.29282-5-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-12-07devlink: Expose port function commands to control migratableShay Drory1-0/+46
Expose port function commands to enable / disable migratable capability, this is used to set the port function as migratable. Live migration is the process of transferring a live virtual machine from one physical host to another without disrupting its normal operation. In order for a VM to be able to perform LM, all the VM components must be able to perform migration. e.g.: to be migratable. In order for VF to be migratable, VF must be bound to VFIO driver with migration support. When migratable capability is enabled for a function of the port, the device is making the necessary preparations for the function to be migratable, which might include disabling features which cannot be migrated. Example of LM with migratable function configuration: Set migratable of the VF's port function. $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:00:00:00:00:00 migratable disable $ devlink port function set pci/0000:06:00.0/2 migratable enable $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:00:00:00:00:00 migratable enable Bind VF to VFIO driver with migration support: $ echo <pci_id> > /sys/bus/pci/devices/0000:08:00.0/driver/unbind $ echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:08:00.0/driver_override $ echo <pci_id> > /sys/bus/pci/devices/0000:08:00.0/driver/bind Attach VF to the VM. Start the VM. Perform LM. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-07devlink: Expose port function commands to control RoCEShay Drory1-1/+33
Expose port function commands to enable / disable RoCE, this is used to control the port RoCE device capabilities. When RoCE is disabled for a function of the port, function cannot create any RoCE specific resources (e.g GID table). It also saves system memory utilization. For example disabling RoCE enable a VF/SF saves 1 Mbytes of system memory per function. Example of a PCI VF port which supports function configuration: Set RoCE of the VF's port function. $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:00:00:00:00:00 roce enable $ devlink port function set pci/0000:06:00.0/2 roce disable $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:00:00:00:00:00 roce disable Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-07devlink: Move devlink port function hw_addr attr documentationShay Drory1-1/+41
devlink port function hw_addr attr documentation is in mlx5 specific file while there is nothing mlx5 specific about it. Move it to devlink-port.rst. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30ice: implement direct read for NVM and Shadow RAM regionsJacob Keller1-2/+6
Implement the .read handler for the NVM and Shadow RAM regions. This enables user space to read a small chunk of the flash without needing the overhead of creating a full snapshot. Update the documentation for ice to detail which regions have direct read support. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30ice: document 'shadow-ram' devlink regionJacob Keller1-0/+5
78ad87da9978 ("ice: devlink: add shadow-ram region to snapshot Shadow RAM") added support for the 'shadow-ram' devlink region, but did not document it in the ice devlink documentation. Fix this. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-30devlink: support directly reading from region memoryJacob Keller1-0/+13
To read from a region, user space must currently request a new snapshot of the region and then read from that snapshot. This can sometimes be overkill if user space only reads a tiny portion. They first create the snapshot, then request a read, then destroy the snapshot. For regions which have a single underlying "contents", it makes sense to allow supporting direct reading of the region data. Extend the DEVLINK_CMD_REGION_READ to allow direct reading from a region if requested via the new DEVLINK_ATTR_REGION_DIRECT. If this attribute is set, then perform a direct read instead of using a snapshot. Direct read is mutually exclusive with DEVLINK_ATTR_REGION_SNAPSHOT_ID, and care is taken to ensure that we reject commands which provide incorrect attributes. Regions must enable support for direct read by implementing the .read() callback function. If a region does not support such direct reads, a suitable extended error message is reported. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23Documentation: devlink: Add blank line padding on numbered lists in Devlink ↵Bagas Sanjaya1-4/+9
Port documentation kernel test robot reported indentation warnings: Documentation/networking/devlink/devlink-port.rst:220: WARNING: Unexpected indentation. Documentation/networking/devlink/devlink-port.rst:222: WARNING: Block quote ends without a blank line; unexpected unindent. These warnings cause lists (arbitration flow for which the warnings blame to and 3-step subfunction setup) to be rendered inline instead. Also, for the former list, automatic list numbering is messed up. Fix these warnings by adding missing blank line padding. Link: https://lore.kernel.org/linux-doc/202211200926.kfOPiVti-lkp@intel.com/ Fixes: 242dd64375b80a ("Documentation: Add documentation for new devlink-rate attributes") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-17Documentation: Add documentation for new devlink-rate attributesMichal Wilczynski1-1/+32
Provide documentation for newly introduced netlink attributes for devlink-rate: tx_priority and tx_weight. Mention the possibility to export tree from the driver. Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17ice: Add documentation for devlink-rate implementationMichal Wilczynski1-0/+115
Add documentation to a newly added devlink-rate feature. Provide some examples on how to use the commands, which netlink attributes are supported and descriptions of the attributes. Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09devlink: Add packet traps for 802.1X operationIdo Schimmel1-0/+13
Add packet traps for 802.1X operation. The "eapol" control trap is used to trap EAPOL packets and is required for the correct operation of the control plane. The "locked_port" drop trap can be enabled to gain visibility into packets that were dropped by the device due to the locked bridge port check. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31Documentation: networking: correct possessive "its"Randy Dunlap1-1/+1
Change occurrences of "it's" that are possessive to "its" so that they don't read as "it is". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220829235414.17110-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26Merge branch '100GbE' of ↵David S. Miller1-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-24 (ice) This series contains updates to ice driver only. Marcin adds support for TC parsing on TTL and ToS fields. Anatolli adds support for devlink port split command to allow configuration of various port configurations. Jake allows for passing and writing an additional NVM write activate field by expanding current cmd_flag. Ani makes PHY debug output more readable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-24Documentation: devlink: fix the locking sectionJiri Pirko1-4/+2
As all callbacks are converted now, fix the text reflecting that change. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220823070213.1008956-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24ice: Implement devlink port split operationsAnatolii Gerasymenko1-0/+36
Allow to configure port split options using the devlink port split interface. Support port splitting only for port 0, as the FW has a predefined set of available port split options for the whole device. Add ice_devlink_port_options_print() function to print the table with all available FW port split options. It will be printed after each port split and unsplit command. Add documentation for devlink port split interface usage for the ice driver. Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-19Revert "Merge branch 'wwan-t7xx-fw-flashing-and-coredump-support'"Jakub Kicinski2-146/+0
This reverts commit 5417197dd516a8e115aa69f62a7b7554b0c3829c, reversing changes made to 0630f64d25a0f0a8c6a9ce9fde8750b3b561e6f5. Reverting to allow addressing review comments. Link: https://lore.kernel.org/all/4c5dbea0-52a9-1c3d-7547-00ea54c90550@linux.intel.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: wwan: t7xx: Devlink documentationM Chetan Kumar2-0/+146
Document the t7xx devlink commands usage for fw flashing & coredump collection. Refer to t7xx.rst file for details. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-01Documentation: devlink: add add devlink-selftests to the table of contentsBagas Sanjaya1-0/+1
Commit 08f588fa301bef ("devlink: introduce framework for selftests") adds documentation for devlink selftests framework, but it is missing from table of contents. Add it. Link: https://lore.kernel.org/linux-doc/202207300406.CUBuyN5i-lkp@intel.com/ Fixes: 08f588fa301bef ("devlink: introduce framework for selftests") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20220730022058.16813-1-bagasdotme@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28devlink: introduce framework for selftestsVikas Gupta1-0/+38
Add a framework for running selftests. Framework exposes devlink commands and test suite(s) to the user to execute and query the supported tests by the driver. Below are new entries in devlink_nl_ops devlink_nl_cmd_selftests_show_doit/dumpit: To query the supported selftests by the drivers. devlink_nl_cmd_selftests_run: To execute selftests. Users can provide a test mask for executing group tests or standalone tests. Documentation/networking/devlink/ path is already part of MAINTAINERS & the new files come under this path. Hence no update needed to the MAINTAINERS Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: core_linecards: Expose device PSID over device infoJiri Pirko1-0/+3
Use tunneled MGIR to obtain PSID of line card device and extend device_info_get() op to fill up the info with that. Example: $ devlink dev info auxiliary/mlxsw_core.lc.0 auxiliary/mlxsw_core.lc.0: versions: fixed: hw.revision 0 fw.psid MT_0000000749 running: ini.version 4 fw 19.2010.1312 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: core_linecards: Probe active line cards for devices and expose FW versionJiri Pirko1-0/+3
In case the line card is active, go over all possible existing devices (gearboxes) on it and expose FW version of the flashable one. Example: $ devlink dev info auxiliary/mlxsw_core.lc.0 auxiliary/mlxsw_core.lc.0: versions: fixed: hw.revision 0 running: ini.version 4 fw 19.2010.1312 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: core_linecards: Expose HW revision and INI versionJiri Pirko1-0/+18
Implement info_get() to expose HW revision of a linecard and loaded INI version. Example: $ devlink dev info auxiliary/mlxsw_core.lc.0 auxiliary/mlxsw_core.lc.0: versions: fixed: hw.revision 0 running: ini.version 4 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05Revert "Merge branch 'mlxsw-line-card-model'"Jakub Kicinski2-37/+0
This reverts commit 5e927a9f4b9f29d78a7c7d66ea717bb5c8bbad8e, reversing changes made to cfc1d91a7d78cf9de25b043d81efcc16966d55b3. The discussion is still ongoing so let's remove the uAPI until the discussion settles. Link: https://lore.kernel.org/all/20220425090021.32e9a98f@kernel.org/ Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220504154037.539442-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-25mlxsw: core_linecards: Expose device FW version over device infoJiri Pirko1-0/+15
Extend MDDQ to obtain FW version of line card device and implement device_info_get() op to fill up the info with that. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25mlxsw: core_linecards: Expose HW revision and INI versionJiri Pirko1-0/+18
Implement info_get() to expose HW revision of a linecard and loaded INI version. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25devlink: introduce line card device info infrastructureJiri Pirko1-1/+1
Extend the line card info message with information (e.g., FW version) about devices found on the line card. Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 devices: device 0 versions: running: fw 19.2010.1310 device 1 versions: running: fw 19.2010.1310 device 2 versions: running: fw 19.2010.1310 device 3 versions: running: fw 19.2010.1310 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25devlink: introduce line card info get messageJiri Pirko1-0/+4
Allow the driver to provide per line card info get op to fill-up info, similar to the "devlink dev info". Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card active stateJiri Pirko1-5/+6
Allow driver to mark a line card as active. Expose this state to the userspace over devlink netlink interface with proper notifications. 'active' state means that line card was plugged in after being provisioned. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card provisioningJiri Pirko2-0/+122
In order to be able to configure all needed stuff on a port/netdevice of a line card without the line card being present, introduce line card provisioning. Basically by setting a type, provisioning process will start and driver is supposed to create a placeholder for instances (ports/netdevices) for a line card type. Allow the user to query the supported line card types over line card get command. Then implement two netlink command SET to allow user to set/unset the card type. On the driver API side, add provision/unprovision ops and supported types array to be advertised. Upon provision op call, the driver should take care of creating the instances for the particular line card type. Introduce provision_set/clear() functions to be called by the driver once the provisioning/unprovisioning is done on its side. These helpers are not to be called directly due to the async nature of provisioning. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 $ devlink lc set pci/0000:01:00.0 lc 8 notype Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-16devlink: expose instance locking and add locked port registeringJakub Kicinski1-0/+16
It should be familiar and beneficial to expose devlink instance lock to the drivers. This way drivers can block devlink from calling them during critical sections without breakneck locking. Add port helpers, port splitting callbacks will be the first target. Use 'devl_' prefix for "explicitly locked" API. Initial RFC used '__devlink' but that's too much typing. devl_lock_is_held() is not defined without lockdep, which is the same behavior as lockdep_is_held() itself. Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-06Documentation: devlink: mlx5.rst: Fix htmldoc build warningSaeed Mahameed1-0/+1
Fix the following build warning: Documentation/networking/devlink/mlx5.rst:13: WARNING: Error parsing content block for the "list-table" directive: +uniform two-level bullet list expected, but row 2 does not contain the same number of items as row 1 (2 vs 3). ... Add the missing item in the first row. Fixes: 0844fa5f7b89 ("net/mlx5: Let user configure io_eq_size param") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21net/mlx5: Let user configure max_macs generic paramShay Drory1-0/+3
Currently, max_macs is taking 70Kbytes of memory per function. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the number of max_macs. For example, to reduce the number of max_macs to 1, execute:: $ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21devlink: Clarifies max_macs generic devlink paramShay Drory1-2/+4
The generic param max_macs documentation isn't clear. Replace it with a more descriptive documentation Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21net/mlx5: Let user configure event_eq_size paramShay Drory1-0/+3
Event EQ is an EQ which received the notification of almost all the events generated by the NIC. Currently, each event EQ is taking 512KB of memory. This size is not needed in most use cases, and is critical with large scale. Hence, allow user to configure the size of the event EQ. For example to reduce event EQ size to 64, execute:: $ devlink dev param set pci/0000:00:0b.0 name event_eq_size value 64 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21devlink: Add new "event_eq_size" generic device paramShay Drory1-0/+3
Add new device generic parameter to determine the size of the asynchronous control events EQ. For example, to reduce event EQ size to 64, execute: $ devlink dev param set pci/0000:06:00.0 \ name event_eq_size value 64 cmode driverinit $ devlink dev reload pci/0000:06:00.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21net/mlx5: Let user configure io_eq_size paramShay Drory1-0/+4
Currently, each I/O EQ is taking 128KB of memory. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the size of I/O EQs. For example, to reduce I/O EQ size to 64, execute: $ devlink dev param set pci/0000:00:0b.0 name io_eq_size value 64 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 21:57:00 +0000