| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The word "advertize" should be replaced by "advertise".
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The word "advertize" should be replaced by "advertise".
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current nf_flow_is_outdated() implementation considers any flow table flow
which state diverged from its underlying CT connection status for teardown
which can be problematic in the following cases:
- Flow has never been offloaded to hardware in the first place either
because flow table has hardware offload disabled (flag
NF_FLOWTABLE_HW_OFFLOAD is not set) or because it is still pending on 'add'
workqueue to be offloaded for the first time. The former is incorrect, the
later generates excessive deletions and additions of flows.
- Flow is already pending to be updated on the workqueue. Tearing down such
flows will also generate excessive removals from the flow table, especially
on highly loaded system where the latency to re-offload a flow via 'add'
workqueue can be quite high.
When considering a flow for teardown as outdated verify that it is both
offloaded to hardware and doesn't have any pending updates.
Fixes: 41f2c7c342d3 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Since 41f2c7c342d3 ("net/sched: act_ct: Fix promotion of offloaded
unreplied tuple"), flowtable GC pushes back flows with IPS_SEEN_REPLY
back to classic path in every run, ie. every second. This is because of
a new check for NF_FLOW_HW_ESTABLISHED which is specific of sched/act_ct.
In Netfilter's flowtable case, NF_FLOW_HW_ESTABLISHED never gets set on
and IPS_SEEN_REPLY is unreliable since users decide when to offload the
flow before, such bit might be set on at a later stage.
Fix it by adding a custom .gc handler that sched/act_ct can use to
deal with its NF_FLOW_HW_ESTABLISHED bit.
Fixes: 41f2c7c342d3 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reported-by: Vladimir Smelhaus <vl.sm@email.cz>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
With commit 9fee28baa601 ("powerpc: implement the new page table range
API") we added set_ptes to powerpc architecture. The implementation
included calling arch_enter/leave_lazy_mmu() calls.
The patch removes the usage of arch_enter/leave_lazy_mmu() because
set_pte is not supposed to be used when updating a pte entry. Powerpc
architecture uses this rule to skip the expensive tlb invalidate which
is not needed when you are setting up the pte for the first time. See
commit 56eecdb912b5 ("mm: Use ptep/pmdp_set_numa() for updating
_PAGE_NUMA bit") for more details
The patch also makes sure we are not using the interface to update a
valid/present pte entry by adding VM_WARN_ON check all the ptes we
are setting up. Furthermore, we add a comment to set_pte_filter to
clarify it can only update folio-related flags and cannot filter
pfn specific details in pte filtering.
Removal of arch_enter/leave_lazy_mmu() also will avoid nesting of
these functions that are not supported. For ex:
remap_pte_range()
-> arch_enter_lazy_mmu()
-> set_ptes()
-> arch_enter_lazy_mmu()
-> arch_leave_lazy_mmu()
-> arch_leave_lazy_mmu()
Fixes: 9fee28baa601 ("powerpc: implement the new page table range API")
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231024143604.16749-1-aneesh.kumar@linux.ibm.com
|
|
The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one.
Fixes: 8e0764b4d6be42 ("i40e/i40evf: Add support for writeback on ITR feature for X722")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Three more fixes:
- don't drop all unprotected public action frames since
some don't have a protected dual
- fix pointer confusion in scanning code
- fix warning in some connections with multiple links
* tag 'wireless-2023-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: don't drop all unprotected public action frames
wifi: cfg80211: fix assoc response warning on failed links
wifi: cfg80211: pass correct pointer to rdev_inform_bss()
====================
Link: https://lore.kernel.org/r/20231024103540.19198-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 12 are cc:stable and the remainder address post-6.5
issues or aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier
mailmap: correct email aliasing for Oleksij Rempel
mailmap: map Bartosz's old address to the current one
mm/damon/sysfs: check DAMOS regions update progress from before_terminate()
MAINTAINERS: Ondrej has moved
kasan: disable kasan_non_canonical_hook() for HW tags
kasan: print the original fault addr when access invalid shadow
hugetlbfs: close race between MADV_DONTNEED and page fault
hugetlbfs: extend hugetlb_vma_lock to private VMAs
hugetlbfs: clear resv_map pointer if mmap fails
mm: zswap: fix pool refcount bug around shrink_worker()
mm/migrate: fix do_pages_move for compat pointers
riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set
riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking
mmap: fix error paths with dup_anon_vma()
mmap: fix vma_iterator in error path of vma_merge()
mm: fix vm_brk_flags() to not bail out while holding lock
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
mm/page_alloc: correct start page when guard page debug is enabled
|
|
fpga_region_class_find() in fpga_region_test_class_find() will call
get_device() if the data is matched, which will increment refcount for
dev->kobj, so it should call put_device() to decrement refcount for
dev->kobj to free the region, because fpga_region_unregister() will call
fpga_region_dev_release() only when the refcount for dev->kobj is zero
but fpga_region_test_init() call device_register() in
fpga_region_register_full(), which also increment refcount.
So call put_device() after calling fpga_region_class_find() in
fpga_region_test_class_find(). After applying this patch, the following
memory leak is never detected.
unreferenced object 0xffff88810c8ef000 (size 1024):
comm "kunit_try_catch", pid 1875, jiffies 4294715298 (age 836.836s)
hex dump (first 32 bytes):
b8 d1 fb 05 81 88 ff ff 08 f0 8e 0c 81 88 ff ff ................
08 f0 8e 0c 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff817ebad7>] kmalloc_trace+0x27/0xa0
[<ffffffffa02385e1>] fpga_region_register_full+0x51/0x430 [fpga_region]
[<ffffffffa0228e47>] 0xffffffffa0228e47
[<ffffffff829c479d>] kunit_try_run_case+0xdd/0x250
[<ffffffff829c9f2a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81238b85>] kthread+0x2b5/0x380
[<ffffffff81097ded>] ret_from_fork+0x2d/0x70
[<ffffffff810034d1>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888105fbd1b8 (size 8):
comm "kunit_try_catch", pid 1875, jiffies 4294715298 (age 836.836s)
hex dump (first 8 bytes):
72 65 67 69 6f 6e 30 00 region0.
backtrace:
[<ffffffff817ec023>] __kmalloc_node_track_caller+0x53/0x150
[<ffffffff82995590>] kvasprintf+0xb0/0x130
[<ffffffff83f713b1>] kobject_set_name_vargs+0x41/0x110
[<ffffffff8304ac1b>] dev_set_name+0xab/0xe0
[<ffffffffa02388a2>] fpga_region_register_full+0x312/0x430 [fpga_region]
[<ffffffffa0228e47>] 0xffffffffa0228e47
[<ffffffff829c479d>] kunit_try_run_case+0xdd/0x250
[<ffffffff829c9f2a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81238b85>] kthread+0x2b5/0x380
[<ffffffff81097ded>] ret_from_fork+0x2d/0x70
[<ffffffff810034d1>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810b3b8a00 (size 256):
comm "kunit_try_catch", pid 1875, jiffies 4294715298 (age 836.836s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 8a 3b 0b 81 88 ff ff ..........;.....
08 8a 3b 0b 81 88 ff ff e0 ac 04 83 ff ff ff ff ..;.............
backtrace:
[<ffffffff817ebad7>] kmalloc_trace+0x27/0xa0
[<ffffffff83056d7a>] device_add+0xa2a/0x15e0
[<ffffffffa02388b1>] fpga_region_register_full+0x321/0x430 [fpga_region]
[<ffffffffa0228e47>] 0xffffffffa0228e47
[<ffffffff829c479d>] kunit_try_run_case+0xdd/0x250
[<ffffffff829c9f2a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81238b85>] kthread+0x2b5/0x380
[<ffffffff81097ded>] ret_from_fork+0x2d/0x70
[<ffffffff810034d1>] ret_from_fork_asm+0x11/0x20
Fixes: 64a5f972c93d ("fpga: add an initial KUnit suite for the FPGA Region")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20231007094321.3447084-1-ruanjinjie@huawei.com
[yilun.xu@intel.com: slightly changes the commit message]
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://lore.kernel.org/r/20231023032857.902699-3-yilun.xu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the maintainer for the Intel MAX10 BMC Secure Update driver from
Russ Weight to Peter Colberg. Update the ABI documentation contact
information as well.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Peter Colberg <peter.colberg@intel.com>
Link: https://lore.kernel.org/r/20230928164753.278684-1-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://lore.kernel.org/r/20231023032857.902699-2-yilun.xu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When supporting OA for TGL, it was seen that the context valid bit in
the report ID was not defined, however revisiting the spec seems to have
this bit defined. The bit is used to determine if a context is valid on
a context switch and is essential to determine active and idle periods
for a context. Re-enable the context valid bit for gen12 platforms.
BSpec: 52196 (description of report_id)
v2: Include BSpec reference (Ashutosh)
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802202854.1224547-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 7eeaedf79989a8f131939782832e21e9218ed2a0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Smatch is awesome.
Fixes: 32671e3799ca ("perf: Disallow mis-matched inherited group reads")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
GTP tunnel driver fixes
The following patchset contains two fixes for the GTP tunnel driver:
1) Incorrect GTPA_MAX definition in UAPI headers. This is updating an
existing UAPI definition but for a good reason, this is certainly
broken. Similar fixes for incorrect _MAX definition in netlink
headers were applied in the past too.
2) Fix GTP driver PMTU with GRO packets, add missing call to
skb_gso_validate_network_len() to handle GRO packets.
====================
Link: https://lore.kernel.org/r/20231022202519.659526-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Call skb_gso_validate_network_len() to check if packet is over PMTU.
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Subtract one to __GTPA_MAX, otherwise GTPA_MAX is off by 2.
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Check that sk_user_data is not NULL, else return from cn_filter().
Could not reproduce this issue, but Oliver Sang verified it has fixed
the "Closes" problem below.
Fixes: 2aa1f7a1f47c ("connector/cn_proc: Add filtering to fix some bugs")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309201456.84c19e27-oliver.sang@intel.com/
Signed-off-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com>
Link: https://lore.kernel.org/r/20231020234058.2232347-1-anjali.k.kulkarni@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull nfsd fix from Al Viro:
"Catch from lock_rename() audit; nfsd_rename() checked that both
directories belonged to the same filesystem, but only after having
done lock_rename().
Trivial fix, tested and acked by nfs folks"
* tag 'pull-nfsd-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: lock_rename() needs both directories to live on the same fs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
- tools/nolibc: i386: Fix a stack misalign bug on _start
- MAINTAINERS: nolibc: update tree location
- tools/nolibc: mark start_c as weak to avoid linker errors
* tag 'urgent/nolibc.2023.10.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc: mark start_c as weak
MAINTAINERS: nolibc: update tree location
tools/nolibc: i386: Fix a stack misalign bug on _start
|
|
Reduce the length of netlink error messages as they are likely to be
truncated anyway. Additionally, reword netlink error messages so they
are more consistent with previous messages.
Fixes: 9dbc8d2b9a02 ("sfc: add decrement ipv6 hop limit by offloading set hop limit actions")
Fixes: 3c9561c0a5b9 ("sfc: support TC decap rules matching on enc_ip_tos")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310202136.4u7bv0hp-lkp@intel.com/
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231020140149.30490-1-pieter.jansen-van-vuuren@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 6.6 (part 1)
Update MAINTAINERS for eDPU board
* tag 'mvebu-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
MAINTAINERS: uDPU: add remaining Methode boards
MAINTAINERS: uDPU: make myself maintainer of it
Link: https://lore.kernel.org/r/875y32abqe.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix for a problem with snapshot of a newly created subvolume
that can lead to inconsistent data under some circumstances. Kernel
6.5 added a performance optimization to skip transaction commit for
subvolume creation but this could end up with newer data on disk but
not linked to other structures.
The fix itself is an added condition, the rest of the patch is a
parameter added to several functions"
* tag 'for-6.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix unwritten extent buffer after snapshotting a new subvolume
|
|
Pull virtio fixes from Michael Tsirkin:
"A collection of small fixes that look like worth having in this
release"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: fix the common cfg map size
virtio-crypto: handle config changed by work queue
vhost: Allow null msg.size on VHOST_IOTLB_INVALIDATE
vdpa/mlx5: Fix firmware error on creation of 1k VQs
virtio_balloon: Fix endless deflation and inflation on arm64
vdpa/mlx5: Fix double release of debugfs entry
virtio-mmio: fix memory leak of vm_dev
vdpa_sim_blk: Fix the potential leak of mgmt_dev
tools/virtio: Add dma sync api for virtio test
|
|
If req->hr_proto->hp_accept() fail, we call fput() twice:
Once in the error path, but also a second time because sock->file
is at that point already associated with the file descriptor. Once
the task exits, as it would probably do after receiving an error
reading from netlink, the fd is closed, calling fput() a second time.
To fix, we move installing the file after the error path for the
hp_accept() call. In the case of errors we simply put the unused fd.
In case of success we can use fd_install() to link the sock->file
to the reserved fd.
Fixes: 7ea9c1ec66bc ("net/handshake: Fix handshake_dup() ref counting")
Signed-off-by: Moritz Wanzenböck <moritz.wanzenboeck@linbit.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20231019125847.276443-1-moritz.wanzenboeck@linbit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When creating a snapshot of a subvolume that was created in the current
transaction, we can end up not persisting a dirty extent buffer that is
referenced by the snapshot, resulting in IO errors due to checksum failures
when trying to read the extent buffer later from disk. A sequence of steps
that leads to this is the following:
1) At ioctl.c:create_subvol() we allocate an extent buffer, with logical
address 36007936, for the leaf/root of a new subvolume that has an ID
of 291. We mark the extent buffer as dirty, and at this point the
subvolume tree has a single node/leaf which is also its root (level 0);
2) We no longer commit the transaction used to create the subvolume at
create_subvol(). We used to, but that was recently removed in
commit 1b53e51a4a8f ("btrfs: don't commit transaction for every subvol
create");
3) The transaction used to create the subvolume has an ID of 33, so the
extent buffer 36007936 has a generation of 33;
4) Several updates happen to subvolume 291 during transaction 33, several
files created and its tree height changes from 0 to 1, so we end up with
a new root at level 1 and the extent buffer 36007936 is now a leaf of
that new root node, which is extent buffer 36048896.
The commit root remains as 36007936, since we are still at transaction
33;
5) Creation of a snapshot of subvolume 291, with an ID of 292, starts at
ioctl.c:create_snapshot(). This triggers a commit of transaction 33 and
we end up at transaction.c:create_pending_snapshot(), in the critical
section of a transaction commit.
There we COW the root of subvolume 291, which is extent buffer 36048896.
The COW operation returns extent buffer 36048896, since there's no need
to COW because the extent buffer was created in this transaction and it
was not written yet.
The we call btrfs_copy_root() against the root node 36048896. During
this operation we allocate a new extent buffer to turn into the root
node of the snapshot, copy the contents of the root node 36048896 into
this snapshot root extent buffer, set the owner to 292 (the ID of the
snapshot), etc, and then we call btrfs_inc_ref(). This will create a
delayed reference for each leaf pointed by the root node with a
reference root of 292 - this includes a reference for the leaf
36007936.
After that we set the bit BTRFS_ROOT_FORCE_COW in the root's state.
Then we call btrfs_insert_dir_item(), to create the directory entry in
in the tree of subvolume 291 that points to the snapshot. This ends up
needing to modify leaf 36007936 to insert the respective directory
items. Because the bit BTRFS_ROOT_FORCE_COW is set for the root's state,
we need to COW the leaf. We end up at btrfs_force_cow_block() and then
at update_ref_for_cow().
At update_ref_for_cow() we call btrfs_block_can_be_shared() which
returns false, despite the fact the leaf 36007936 is shared - the
subvolume's root and the snapshot's root point to that leaf. The
reason that it incorrectly returns false is because the commit root
of the subvolume is extent buffer 36007936 - it was the initial root
of the subvolume when we created it. So btrfs_block_can_be_shared()
which has the following logic:
int btrfs_block_can_be_shared(struct btrfs_root *root,
struct extent_buffer *buf)
{
if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state) &&
buf != root->node && buf != root->commit_root &&
(btrfs_header_generation(buf) <=
btrfs_root_last_snapshot(&root->root_item) ||
btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)))
return 1;
return 0;
}
Returns false (0) since 'buf' (extent buffer 36007936) matches the
root's commit root.
As a result, at update_ref_for_cow(), we don't check for the number
of references for extent buffer 36007936, we just assume it's not
shared and therefore that it has only 1 reference, so we set the local
variable 'refs' to 1.
Later on, in the final if-else statement at update_ref_for_cow():
static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf,
struct extent_buffer *cow,
int *last_ref)
{
(...)
if (refs > 1) {
(...)
} else {
(...)
btrfs_clear_buffer_dirty(trans, buf);
*last_ref = 1;
}
}
So we mark the extent buffer 36007936 as not dirty, and as a result
we don't write it to disk later in the transaction commit, despite the
fact that the snapshot's root points to it.
Attempting to access the leaf or dumping the tree for example shows
that the extent buffer was not written:
$ btrfs inspect-internal dump-tree -t 292 /dev/sdb
btrfs-progs v6.2.2
file tree key (292 ROOT_ITEM 33)
node 36110336 level 1 items 2 free space 119 generation 33 owner 292
node 36110336 flags 0x1(WRITTEN) backref revision 1
checksum stored a8103e3e
checksum calced a8103e3e
fs uuid 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79
chunk uuid e8c9c885-78f4-4d31-85fe-89e5f5fd4a07
key (256 INODE_ITEM 0) block 36007936 gen 33
key (257 EXTENT_DATA 0) block 36052992 gen 33
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
total bytes 107374182400
bytes used 38572032
uuid 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79
The respective on disk region is full of zeroes as the device was
trimmed at mkfs time.
Obviously 'btrfs check' also detects and complains about this:
$ btrfs check /dev/sdb
Opening filesystem to check...
Checking filesystem on /dev/sdb
UUID: 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79
generation: 33 (33)
[1/7] checking root items
[2/7] checking extents
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
bad tree block 36007936, bytenr mismatch, want=36007936, have=0
owner ref check failed [36007936 4096]
ERROR: errors found in extent allocation tree or chunk allocation
[3/7] checking free space tree
[4/7] checking fs roots
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
bad tree block 36007936, bytenr mismatch, want=36007936, have=0
The following tree block(s) is corrupted in tree 292:
tree block bytenr: 36110336, level: 1, node key: (256, 1, 0)
root 292 root dir 256 not found
ERROR: errors found in fs roots
found 38572032 bytes used, error(s) found
total csum bytes: 16048
total tree bytes: 1265664
total fs tree bytes: 1118208
total extent tree bytes: 65536
btree space waste bytes: 562598
file data blocks allocated: 65978368
referenced 36569088
Fix this by updating btrfs_block_can_be_shared() to consider that an
extent buffer may be shared if it matches the commit root and if its
generation matches the current transaction's generation.
This can be reproduced with the following script:
$ cat test.sh
#!/bin/bash
MNT=/mnt/sdi
DEV=/dev/sdi
# Use a filesystem with a 64K node size so that we have the same node
# size on every machine regardless of its page size (on x86_64 default
# node size is 16K due to the 4K page size, while on PPC it's 64K by
# default). This way we can make sure we are able to create a btree for
# the subvolume with a height of 2.
mkfs.btrfs -f -n 64K $DEV
mount $DEV $MNT
btrfs subvolume create $MNT/subvol
# Create a few empty files on the subvolume, this bumps its btree
# height to 2 (root node at level 1 and 2 leaves).
for ((i = 1; i <= 300; i++)); do
echo -n > $MNT/subvol/file_$i
done
btrfs subvolume snapshot -r $MNT/subvol $MNT/subvol/snap
umount $DEV
btrfs check $DEV
Running it on a 6.5 kernel (or any 6.6-rc kernel at the moment):
$ ./test.sh
Create subvolume '/mnt/sdi/subvol'
Create a readonly snapshot of '/mnt/sdi/subvol' in '/mnt/sdi/subvol/snap'
Opening filesystem to check...
Checking filesystem on /dev/sdi
UUID: bbdde2ff-7d02-45ca-8a73-3c36f23755a1
[1/7] checking root items
[2/7] checking extents
parent transid verify failed on 30539776 wanted 7 found 5
parent transid verify failed on 30539776 wanted 7 found 5
parent transid verify failed on 30539776 wanted 7 found 5
Ignoring transid failure
owner ref check failed [30539776 65536]
ERROR: errors found in extent allocation tree or chunk allocation
[3/7] checking free space tree
[4/7] checking fs roots
parent transid verify failed on 30539776 wanted 7 found 5
Ignoring transid failure
Wrong key of child node/leaf, wanted: (256, 1, 0), have: (2, 132, 0)
Wrong generation of child node/leaf, wanted: 5, have: 7
root 257 root dir 256 not found
ERROR: errors found in fs roots
found 917504 bytes used, error(s) found
total csum bytes: 0
total tree bytes: 851968
total fs tree bytes: 393216
total extent tree bytes: 65536
btree space waste bytes: 736550
file data blocks allocated: 0
referenced 0
A test case for fstests will follow soon.
Fixes: 1b53e51a4a8f ("btrfs: don't commit transaction for every subvol create")
CC: stable@vger.kernel.org # 6.5+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Looks like the KFD still needs this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 8abc1eb2987a ("drm/amdkfd: switch over to using drm_exec v3")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020123306.43978-1-christian.koenig@amd.com
|
|
Erhard reported that his G5 was crashing with v6.6-rc kernels:
mpic: Setting up HT PICs workarounds for U3/U4
BUG: Unable to handle kernel data access at 0xfeffbb62ffec65fe
Faulting instruction address: 0xc00000000005dc40
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G T 6.6.0-rc3-PMacGS #1
Hardware name: PowerMac11,2 PPC970MP 0x440101 PowerMac
NIP: c00000000005dc40 LR: c000000000066660 CTR: c000000000007730
REGS: c0000000022bf510 TRAP: 0380 Tainted: G T (6.6.0-rc3-PMacGS)
MSR: 9000000000001032 <SF,HV,ME,IR,DR,RI> CR: 44004242 XER: 00000000
IRQMASK: 3
GPR00: 0000000000000000 c0000000022bf7b0 c0000000010c0b00 00000000000001ac
GPR04: 0000000003c80000 0000000000000300 c0000000f20001ae 0000000000000300
GPR08: 0000000000000006 feffbb62ffec65ff 0000000000000001 0000000000000000
GPR12: 9000000000001032 c000000002362000 c000000000f76b80 000000000349ecd8
GPR16: 0000000002367ba8 0000000002367f08 0000000000000006 0000000000000000
GPR20: 00000000000001ac c000000000f6f920 c0000000022cd985 000000000000000c
GPR24: 0000000000000300 00000003b0a3691d c0003e008030000e 0000000000000000
GPR28: c00000000000000c c0000000f20001ee feffbb62ffec65fe 00000000000001ac
NIP hash_page_do_lazy_icache+0x50/0x100
LR __hash_page_4K+0x420/0x590
Call Trace:
hash_page_mm+0x364/0x6f0
do_hash_fault+0x114/0x2b0
data_access_common_virt+0x198/0x1f0
--- interrupt: 300 at mpic_init+0x4bc/0x10c4
NIP: c000000002020a5c LR: c000000002020a04 CTR: 0000000000000000
REGS: c0000000022bf9f0 TRAP: 0300 Tainted: G T (6.6.0-rc3-PMacGS)
MSR: 9000000000001032 <SF,HV,ME,IR,DR,RI> CR: 24004248 XER: 00000000
DAR: c0003e008030000e DSISR: 40000000 IRQMASK: 1
...
NIP mpic_init+0x4bc/0x10c4
LR mpic_init+0x464/0x10c4
--- interrupt: 300
pmac_setup_one_mpic+0x258/0x2dc
pmac_pic_init+0x28c/0x3d8
init_IRQ+0x90/0x140
start_kernel+0x57c/0x78c
start_here_common+0x1c/0x20
A bisect pointed to the breakage beginning with commit 9fee28baa601 ("powerpc:
implement the new page table range API").
Analysis of the oops pointed to a struct page with a corrupted
compound_head being loaded via page_folio() -> _compound_head() in
hash_page_do_lazy_icache().
The access by the mpic code is to an MMIO address, so the expectation
is that the struct page for that address would be initialised by
init_unavailable_range(), as pointed out by Aneesh.
Instrumentation showed that was not the case, which eventually lead to
the realisation that pfn_valid() was returning false for that address,
causing the struct page to not be initialised.
Because the system is using FLATMEM, the version of pfn_valid() in
memory_model.h is used:
static inline int pfn_valid(unsigned long pfn)
{
...
return pfn >= pfn_offset && (pfn - pfn_offset) < max_mapnr;
}
Which relies on max_mapnr being initialised. Early in boot max_mapnr is
zero meaning no PFNs are valid.
max_mapnr is initialised in mem_init() called via:
start_kernel()
mm_core_init() # init/main.c:928
mem_init()
But that is too late for the usage in init_unavailable_range() called via:
start_kernel()
setup_arch() # init/main.c:893
paging_init()
free_area_init()
init_unavailable_range()
Although max_mapnr is currently set in mem_init(), the value is actually
already available much earlier, as soon as mem_topology_setup() has
completed, which is also before paging_init() is called. So move the
initialisation there, which causes paging_init() to correctly initialise
the struct page and fixes the bug.
This bug seems to have been lurking for years, but went unnoticed
because the pre-folio code was inspecting the uninitialised page->flags
but not dereferencing it.
Thanks to Erhard and Aneesh for help debugging.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20230929132750.3cd98452@yea/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023112500.1550208-1-mpe@ellerman.id.au
|
|
Not all public action frames have a protected variant. When MFP is
enabled drop only public action frames that have a dual protected
variant.
Fixes: 76a3059cf124 ("wifi: mac80211: drop some unprotected action frames")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231016145213.2973e3c8d3bb.I6198b8d3b04cf4a97b06660d346caec3032f232a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The warning here shouldn't be done before we even set the
bss field (or should've used the input data). Move the
assignment before the warning to fix it.
We noticed this now because of Wen's bugfix, where the bug
fixed there had previously hidden this other bug.
Fixes: 53ad07e9823b ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Confusing struct member names here resulted in passing
the wrong pointer, causing crashes. Pass the correct one.
Fixes: eb142608e2c4 ("wifi: cfg80211: use a struct for inform_single_bss data")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20231021154827.1142734-1-greearb@candelatech.com
[rewrite commit message, add fixes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
protocoll -> protocol
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- mapphone-mdm6600 runtime pm & pinctrl handling fixes
- Qualcomm qmp usb pcs register fixes, qmp pcie register size warning
fix, m31 fixes for wrong pointer in PTR_ERR and dropping wrong vreg
check, qmp combo fix for 8550 power config register
- realtek usb fix for debugfs_create_dir() and kconfig dependency
* tag 'phy-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: realtek: Realtek PHYs should depend on ARCH_REALTEK
phy: qualcomm: Fix typos in comments
phy: qcom-qmp-combo: initialize PCS_USB registers
phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1
phy: qcom: m31: Remove unwanted qphy->vreg is NULL check
phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir()
phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static
phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size
phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p
phy: qcom-qmp-usb: initialize PCS_USB registers
phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins
phy: mapphone-mdm6600: Fix runtime PM for remove
phy: mapphone-mdm6600: Fix runtime disable on probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"The boot_params pointer fix uses a somewhat ugly extern struct
declaration but this will be cleaned up the next cycle.
- don't try to print warnings to the console when it is no longer
available
- fix theoretical memory leak in SSDT override handling
- make sure that the boot_params global variable is set before the
KASLR code attempts to hash it for 'randomness'
- avoid soft lockups in the memory acceptance code"
* tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: Fix soft lockups caused by parallel memory acceptance
x86/boot: efistub: Assign global boot_params variable
efi: fix memory leak in krealloc failure handling
x86/efistub: Don't try to print after ExitBootService()
|
|
This commit fix wrong RTO timeout when received SACK reneging.
When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging()
will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.
But since the commit 62d9f1a6945b ("tcp: fix TLP timer not set when
CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer()
is moved after tcp_fastretrans_alert()(which do the SACK reneging check),
so the RTO timeout will be overwrited by tcp_set_xmit_timer() with
icsk_rto instead of 1/2*srtt.
Here is a packetdrill script to check this bug:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// simulate srtt to 100ms
+0 < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+.1 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0 write(4, ..., 10000) = 10000
+0 > P. 1:10001(10000) ack 1
// inject sack
+.1 < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop>
+0 > . 1:1001(1000) ack 1
// inject sack reneging
+.1 < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>
// we expect rto fired in 1/2*srtt (50ms)
+.05 > . 1001:2001(1000) ack 1
This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when
tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid
being overwrited later.
Fixes: 62d9f1a6945b ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN")
Signed-off-by: Fred Chen <fred.chenchen03@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If there is no NFIT at startup, it will return 0 immediately in function
acpi_nfit_add() and will not install Notify() handler. If hotplugging
a nvdimm device later, it will not be identified as there is no Notify()
handler.
Install the handler before getting NFI table in function acpi_nfit_add()
to avoid above issue.
Fixes: dcca12ab62a2 ("ACPI: NFIT: Install Notify() handler directly")
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Douglas Anderson says:
====================
r8152: Avoid writing garbage to the adapter's registers
This series is the result of a cooperative debug effort between
Realtek and the ChromeOS team. On ChromeOS, we've noticed that Realtek
Ethernet adapters can sometimes get so wedged that even a reboot of
the host can't get them to enumerate again, assuming that the adapter
was on a powered hub and din't lose power when the host rebooted. This
is sometimes seen in the ChromeOS automated testing lab. The only way
to recover adapters in this state is to manually power cycle them.
I managed to reproduce one instance of this wedging (unknown if this
is truly related to what the test lab sees) by doing this:
1. Start a flood ping from a host to the device.
2. Drop the device into kdb.
3. Wait 90 seconds.
4. Resume from kdb (the "g" command).
5. Wait another 45 seconds.
Upon analysis, Realtek realized this was happening:
1. The Linux driver was getting a "Tx timeout" after resuming from kdb
and then trying to reset itself.
2. As part of the reset, the Linux driver was attempting to do a
read-modify-write of the adapter's registers.
3. The read would fail (due to a timeout) and the driver pretended
that the register contained all 0xFFs. See commit f53a7ad18959
("r8152: Set memory to all 0xFFs on failed reg reads")
4. The driver would take this value of all 0xFFs, modify it, and
attempt to write it back to the adapter.
5. By this time the USB channel seemed to recover and thus we'd
successfully write a value that was mostly 0xFFs to the adpater.
6. The adapter didn't like this and would wedge itself.
Another Engineer also managed to reproduce wedging of the Realtek
Ethernet adpater during a reboot test on an AMD Chromebook. In that
case he was sometimes seeing -EPIPE returned from the control
transfers.
This patch series fixes both issues.
Changes in v5:
- ("Run the unload routine if we have errors during probe") new for v5.
- ("Cancel hw_phy_work if we have an error in probe") new for v5.
- ("Release firmware if we have an error in probe") new for v5.
- Removed extra mutex_unlock() left over in v4.
- Fixed minor typos.
- Don't do queue an unbind/bind reset if probe fails; just retry probe.
Changes in v4:
- Took out some unnecessary locks/unlocks of the control mutex.
- Added comment about reading version causing probe fail if 3 fails.
- Added text to commit msg about the potential unbind/bind loop.
Changes in v3:
- Fixed v2 changelog ending up in the commit message.
- farmework -> framework in comments.
Changes in v2:
- ("Check for unplug in rtl_phy_patch_request()") new for v2.
- ("Check for unplug in r8153b_ups_en() / r8153c_ups_en()") new for v2.
- ("Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE") new for v2.
- Reset patch no longer based on retry patch, since that was dropped.
- Reset patch should be robust even if failures happen in probe.
- Switched booleans to bits in the "flags" variable.
- Check for -ENODEV instead of "udev->state == USB_STATE_NOTATTACHED"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even though the functions to read/write registers can fail, most of
the places in the r8152 driver that read/write register values don't
check error codes. The lack of error code checking is problematic in
at least two ways.
The first problem is that the r8152 driver often uses code patterns
similar to this:
x = read_register()
x = x | SOME_BIT;
write_register(x);
...with the above pattern, if the read_register() fails and returns
garbage then we'll end up trying to write modified garbage back to the
Realtek adapter. If the write_register() succeeds that's bad. Note
that as of commit f53a7ad18959 ("r8152: Set memory to all 0xFFs on
failed reg reads") the "garbage" returned by read_register() will at
least be consistent garbage, but it is still garbage.
It turns out that this problem is very serious. Writing garbage to
some of the hardware registers on the Ethernet adapter can put the
adapter in such a bad state that it needs to be power cycled (fully
unplugged and plugged in again) before it can enumerate again.
The second problem is that the r8152 driver generally has functions
that are long sequences of register writes. Assuming everything will
be OK if a random register write fails in the middle isn't a great
assumption.
One might wonder if the above two problems are real. You could ask if
we would really have a successful write after a failed read. It turns
out that the answer appears to be "yes, this can happen". In fact,
we've seen at least two distinct failure modes where this happens.
On a sc7180-trogdor Chromebook if you drop into kdb for a while and
then resume, you can see:
1. We get a "Tx timeout"
2. The "Tx timeout" queues up a USB reset.
3. In rtl8152_pre_reset() we try to reinit the hardware.
4. The first several (2-9) register accesses fail with a timeout, then
things recover.
The above test case was actually fixed by the patch ("r8152: Increase
USB control msg timeout to 5000ms as per spec") but at least shows
that we really can see successful calls after failed ones.
On a different (AMD) based Chromebook with a particular adapter, we
found that during reboot tests we'd also sometimes get a transitory
failure. In this case we saw -EPIPE being returned sometimes. Retrying
worked, but retrying is not always safe for all register accesses
since reading/writing some registers might have side effects (like
registers that clear on read).
Let's fully lock out all register access if a register access fails.
When we do this, we'll try to queue up a USB reset and try to unlock
register access after the reset. This is slightly tricker than it
sounds since the r8152 driver has an optimized reset sequence that
only works reliably after probe happens. In order to handle this, we
avoid the optimized reset if probe didn't finish. Instead, we simply
retry the probe routine in this case.
When locking out access, we'll use the existing infrastructure that
the driver was using when it detected we were unplugged. This keeps us
from getting stuck in delay loops in some parts of the driver.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Whenever the RTL8152_UNPLUG is set that just tells the driver that all
accesses will fail and we should just immediately bail. A future patch
will use this same concept at a time when the driver hasn't actually
been unplugged but is about to be reset. Rename the flag in
preparation for the future patch.
This is a no-op change and just a search and replace.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the adapter is unplugged while we're looping in r8153b_ups_en() /
r8153c_ups_en() we could end up looping for 10 seconds (20 ms * 500
loops). Add code similar to what's done in other places in the driver
to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the adapter is unplugged while we're looping in
rtl_phy_patch_request() we could end up looping for 10 seconds (2 ms *
5000 loops). Add code similar to what's done in other places in the
driver to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The error handling in rtl8152_probe() is missing a call to release
firmware. Add it in to match what's in the cleanup code in
rtl8152_disconnect().
Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The error handling in rtl8152_probe() is missing a call to cancel the
hw_phy_work. Add it in to match what's in the cleanup code in
rtl8152_disconnect().
Fixes: a028a9e003f2 ("r8152: move the settings of PHY to a work queue")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The rtl8152_probe() function lacks a call to the chip-specific
unload() routine when it sees an error in probe. Add it in to match
the cleanup code in rtl8152_disconnect().
Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the comment next to USB_CTRL_GET_TIMEOUT and
USB_CTRL_SET_TIMEOUT, although sending/receiving control messages is
usually quite fast, the spec allows them to take up to 5 seconds.
Let's increase the timeout in the Realtek driver from 500ms to 5000ms
(using the #defines) to account for this.
This is not just a theoretical change. The need for the longer timeout
was seen in testing. Specifically, if you drop a sc7180-trogdor based
Chromebook into the kdb debugger and then "go" again after sitting in
the debugger for a while, the next USB control message takes a long
time. Out of ~40 tests the slowest USB control message was 4.5
seconds.
While dropping into kdb is not exactly an end-user scenario, the above
is similar to what could happen due to an temporary interrupt storm,
what could happen if there was a host controller (HW or SW) issue, or
what could happen if the Realtek device got into a confused state and
needed time to recover.
This change is fairly critical since the r8152 driver in Linux doesn't
expect register reads/writes (which are backed by USB control
messages) to fail.
Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Suggested-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported the following uninit-value access issue [1]:
smsc95xx 1-1:0.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x00000030: -32
smsc95xx 1-1:0.0 (unnamed net_device) (uninitialized): Error reading E2P_CMD
=====================================================
BUG: KMSAN: uninit-value in smsc95xx_reset+0x409/0x25f0 drivers/net/usb/smsc95xx.c:896
smsc95xx_reset+0x409/0x25f0 drivers/net/usb/smsc95xx.c:896
smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131
usbnet_probe+0x100b/0x4060 drivers/net/usb/usbnet.c:1750
usb_probe_interface+0xc75/0x1210 drivers/usb/core/driver.c:396
really_probe+0x506/0xf40 drivers/base/dd.c:658
__driver_probe_device+0x2a7/0x5d0 drivers/base/dd.c:800
driver_probe_device+0x72/0x7b0 drivers/base/dd.c:830
__device_attach_driver+0x55a/0x8f0 drivers/base/dd.c:958
bus_for_each_drv+0x3ff/0x620 drivers/base/bus.c:457
__device_attach+0x3bd/0x640 drivers/base/dd.c:1030
device_initial_probe+0x32/0x40 drivers/base/dd.c:1079
bus_probe_device+0x3d8/0x5a0 drivers/base/bus.c:532
device_add+0x16ae/0x1f20 drivers/base/core.c:3622
usb_set_configuration+0x31c9/0x38c0 drivers/usb/core/message.c:2207
usb_generic_driver_probe+0x109/0x2a0 drivers/usb/core/generic.c:238
usb_probe_device+0x290/0x4a0 drivers/usb/core/driver.c:293
really_probe+0x506/0xf40 drivers/base/dd.c:658
__driver_probe_device+0x2a7/0x5d0 drivers/base/dd.c:800
driver_probe_device+0x72/0x7b0 drivers/base/dd.c:830
__device_attach_driver+0x55a/0x8f0 drivers/base/dd.c:958
bus_for_each_drv+0x3ff/0x620 drivers/base/bus.c:457
__device_attach+0x3bd/0x640 drivers/base/dd.c:1030
device_initial_probe+0x32/0x40 drivers/base/dd.c:1079
bus_probe_device+0x3d8/0x5a0 drivers/base/bus.c:532
device_add+0x16ae/0x1f20 drivers/base/core.c:3622
usb_new_device+0x15f6/0x22f0 drivers/usb/core/hub.c:2589
hub_port_connect drivers/usb/core/hub.c:5440 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5580 [inline]
port_event drivers/usb/core/hub.c:5740 [inline]
hub_event+0x53bc/0x7290 drivers/usb/core/hub.c:5822
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2703
worker_thread+0xf45/0x1490 kernel/workqueue.c:2784
kthread+0x3e8/0x540 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Local variable buf.i225 created at:
smsc95xx_read_reg drivers/net/usb/smsc95xx.c:90 [inline]
smsc95xx_reset+0x203/0x25f0 drivers/net/usb/smsc95xx.c:892
smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131
CPU: 1 PID: 773 Comm: kworker/1:2 Not tainted 6.6.0-rc1-syzkaller-00125-ge42bebf6db29 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Workqueue: usb_hub_wq hub_event
=====================================================
Similar to e9c65989920f ("net: usb: smsc75xx: Fix uninit-value access in
__smsc75xx_read_reg"), this issue is caused because usbnet_read_cmd() reads
less bytes than requested (zero byte in the reproducer). In this case,
'buf' is not properly filled.
This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested.
sysbot reported similar uninit-value access issue [2]. The root cause is
the same as mentioned above, and this patch addresses it as well.
Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Reported-and-tested-by: syzbot+c74c24b43c9ae534f0e0@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+2c97a98a5ba9ea9c23bd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c74c24b43c9ae534f0e0 [1]
Closes: https://syzkaller.appspot.com/bug?extid=2c97a98a5ba9ea9c23bd [2]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
t4_set_params_timeout() can return -EINVAL if failed, add check
for this.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
adf7242_stats_show()
strncat() usage in adf7242_debugfs_init() is wrong.
The size given to strncat() is the maximum number of bytes that can be
written, excluding the trailing NULL.
Here, the size that is passed, DNAME_INLINE_LEN, does not take into account
the size of "adf7242-" that is already in the array.
In order to fix it, use snprintf() instead.
Fixes: 7302b9d90117 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix stale propagated yield_cpu in qspinlocks leading to lockups
- Fix broken hugepages on some configs due to ARCH_FORCE_MAX_ORDER
- Fix a spurious warning when copros are in use at exit time
Thanks to Nicholas Piggin, Christophe Leroy, Nysal Jan K.A Sachin Sant,
and Shrikanth Hegde.
* tag 'powerpc-6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/qspinlock: Fix stale propagated yield_cpu
powerpc/64s/radix: Don't warn on copros in radix__tlb_flush()
powerpc/mm: Allow ARCH_FORCE_MAX_ORDER up to 12
|
|
Remove a redundant call to amdgpu_ctx_priority_is_valid() from
amdgpu_ctx_priority_permit(), which is called from amdgpu_ctx_init() which is
called from amdgpu_ctx_alloc() which is called from amdgpu_ctx_ioctl(), where
we've called amdgpu_ctx_priority_is_valid() already first thing in the
function.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20231018010359.30393-1-luben.tuikov@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt handling in suspend and wakeup in gpio-vf610
- fix a bug on setting direction to output in gpio-vf610
- add a missing memset() in gpio ACPI code
* tag 'gpio-fixes-for-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Add missing memset(0) to acpi_get_gpiod_from_data()
gpio: vf610: set value before the direction to avoid a glitch
gpio: vf610: mask the gpio irq in system suspend and support wakeup
|
