| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When a btree block has to be split, we pass the new block's ptr from
xfs_btree_split() back to xfs_btree_insert() via a pointer parameter;
however, we pass the block's key through the cursor's record. It is a
little weird to "initialize" a record from a key since the non-key
attributes will have garbage values.
When we go to add support for interval queries, we have to be able to
pass the lowest and highest keys accessible via a pointer. There's no
clean way to pass this back through the cursor's record field.
Therefore, pass the key directly back to xfs_btree_insert() the same
way that we pass the btree_ptr.
As a bonus, we no longer need init_rec_from_key and can drop it from the
codebase.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
If we make the inode root block of a btree unfull by expanding the
root, we must set *stat to 1 to signal success, rather than leaving
it uninitialized.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
When we're deleting realtime extents, we need to lock the summary
inode in case we need to update the summary info to prevent an assert
on the rsumip inode lock on a debug kernel. While we're at it, fix
the locking annotations so that we avoid triggering lockdep warnings.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Apparently cris doesn't require structure stride to align with the
largest type in the struct, so list[0] isn't at offset 4 like it is
everywhere else. Fix this... insofar as existing XFSes on cris are
screwed.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
When we're iterating inode xattrs by handle, we have to copy the
cursor back to userspace so that a subsequent invocation actually
retrieves subsequent contents.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
|
|
Been around for long enough now, hasn't caused any regression test
failures in the past 3 months, so it's time to make it a fully
supported feature.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
In xfs_finish_page_writeback(), we have a loop that looks like this:
do {
if (off < bvec->bv_offset)
goto next_bh;
if (off > end)
break;
bh->b_end_io(bh, !error);
next_bh:
off += bh->b_size;
} while ((bh = bh->b_this_page) != head);
The b_end_io function is end_buffer_async_write(), which will call
end_page_writeback() once all the buffers have marked as no longer
under IO. This issue here is that the only thing currently
protecting both the bufferhead chain and the page from being
reclaimed is the PageWriteback state held on the page.
While we attempt to limit the loop to just the buffers covered by
the IO, we still read from the buffer size and follow the next
pointer in the bufferhead chain. There is no guarantee that either
of these are valid after the PageWriteback flag has been cleared.
Hence, loops like this are completely unsafe, and result in
use-after-free issues. One such problem was caught by Calvin Owens
with KASAN:
.....
INFO: Freed in 0x103fc80ec age=18446651500051355200 cpu=2165122683 pid=-1
free_buffer_head+0x41/0x90
__slab_free+0x1ed/0x340
kmem_cache_free+0x270/0x300
free_buffer_head+0x41/0x90
try_to_free_buffers+0x171/0x240
xfs_vm_releasepage+0xcb/0x3b0
try_to_release_page+0x106/0x190
shrink_page_list+0x118e/0x1a10
shrink_inactive_list+0x42c/0xdf0
shrink_zone_memcg+0xa09/0xfa0
shrink_zone+0x2c3/0xbc0
.....
Call Trace:
<IRQ> [<ffffffff81e8b8e4>] dump_stack+0x68/0x94
[<ffffffff8153a995>] print_trailer+0x115/0x1a0
[<ffffffff81541174>] object_err+0x34/0x40
[<ffffffff815436e7>] kasan_report_error+0x217/0x530
[<ffffffff81543b33>] __asan_report_load8_noabort+0x43/0x50
[<ffffffff819d651f>] xfs_destroy_ioend+0x3bf/0x4c0
[<ffffffff819d69d4>] xfs_end_bio+0x154/0x220
[<ffffffff81de0c58>] bio_endio+0x158/0x1b0
[<ffffffff81dff61b>] blk_update_request+0x18b/0xb80
[<ffffffff821baf57>] scsi_end_request+0x97/0x5a0
[<ffffffff821c5558>] scsi_io_completion+0x438/0x1690
[<ffffffff821a8d95>] scsi_finish_command+0x375/0x4e0
[<ffffffff821c3940>] scsi_softirq_done+0x280/0x340
Where the access is occuring during IO completion after the buffer
had been freed from direct memory reclaim.
Prevent use-after-free accidents in this end_io processing loop by
pre-calculating the loop conditionals before calling bh->b_end_io().
The loop is already limited to just the bufferheads covered by the
IO in progress, so the offset checks are sufficient to prevent
accessing buffers in the chain after end_page_writeback() has been
called by the the bh->b_end_io() callout.
Yet another example of why Bufferheads Must Die.
cc: <stable@vger.kernel.org> # 4.7
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reported-and-Tested-by: Calvin Owens <calvinowens@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
One of the problems we currently have with delayed logging is that
under serious memory pressure we can deadlock memory reclaim. THis
occurs when memory reclaim (such as run by kswapd) is reclaiming XFS
inodes and issues a log force to unpin inodes that are dirty in the
CIL.
The CIL is pushed, but this will only occur once it gets the CIL
context lock to ensure that all committing transactions are complete
and no new transactions start being committed to the CIL while the
push switches to a new context.
The deadlock occurs when the CIL context lock is held by a
committing process that is doing memory allocation for log vector
buffers, and that allocation is then blocked on memory reclaim
making progress. Memory reclaim, however, is blocked waiting for
a log force to make progress, and so we effectively deadlock at this
point.
To solve this problem, we have to move the CIL log vector buffer
allocation outside of the context lock so that memory reclaim can
always make progress when it needs to force the log. The problem
with doing this is that a CIL push can take place while we are
determining if we need to allocate a new log vector buffer for
an item and hence the current log vector may go away without
warning. That means we canot rely on the existing log vector being
present when we finally grab the context lock and so we must have a
replacement buffer ready to go at all times.
To ensure this, introduce a "shadow log vector" buffer that is
always guaranteed to be present when we gain the CIL context lock
and format the item. This shadow buffer may or may not be used
during the formatting, but if the log item does not have an existing
log vector buffer or that buffer is too small for the new
modifications, we swap it for the new shadow buffer and format
the modifications into that new log vector buffer.
The result of this is that for any object we modify more than once
in a given CIL checkpoint, we double the memory required
to track dirty regions in the log. For single modifications then
we consume the shadow log vectorwe allocate on commit, and that gets
consumed by the checkpoint. However, if we make multiple
modifications, then the second transaction commit will allocate a
shadow log vector and hence we will end up with double the memory
usage as only one of the log vectors is consumed by the CIL
checkpoint. The remaining shadow vector will be freed when th elog
item is freed.
This can probably be optimised in future - access to the shadow log
vector is serialised by the object lock (as opposited to the active
log vector, which is controlled by the CIL context lock) and so we
can probably free shadow log vector from some objects when the log
item is marked clean on removal from the AIL.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xfsprogs source commit 4280e59dcbc4cd8e01585efe788a68eb378048e8
xfs_da3_split() has to handle all three versions of the
directory/attribute btree structure. The attr tree is v1, the dir
tre is v2 or v3. The main difference between the v1 and v2/3 trees
is the way tree nodes are split - in the v1 tree we can require a
double split to occur because the object to be inserted may be
larger than the space made by splitting a leaf. In this case we need
to do a double split - one to split the full leaf, then another to
allocate an empty leaf block in the correct location for the new
entry. This does not happen with dir (v2/v3) formats as the objects
being inserted are always guaranteed to fit into the new space in
the split blocks.
Indeed, for directories they *may* be an extra block on this buffer
pointer. However, it's guaranteed not to be a leaf block (i.e. a
directory data block) - the directory code only ever places hash
index or free space blocks in this pointer (as a cursor of
sorts), and so to use it as a directory data block will immediately
corrupt the directory.
The problem is that the code assumes that there may be extra blocks
that we need to link into the tree once we've split the root, but
this is not true for either dir or attr trees, because the extra
attr block is always consumed by the last node split before we split
the root. Hence the linking in an extra block is always wrong at the
root split level, and this manifests itself in repair as a directory
corruption in a repaired directory, leaving the directory rebuild
incomplete.
This is a dir v2 zero-day bug - it was in the initial dir v2 commit
that was made back in February 1998.
Fix this by ensuring the linking of the blocks after the root split
never tries to make use of the extra blocks that may be held in the
cursor. They are held there for other purposes and should never be
touched by the root splitting code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
We check IS_DAX(inode) before calling either xfs_file_dax_read or
xfs_file_dax_write, and this will lead the call being optimized out at
compile time when CONFIG_FS_DAX is disabled.
However, the two functions are marked STATIC, so they become global
symbols when CONFIG_XFS_DEBUG is set, leaving us with two unused global
functions that call into an undefined function and a broken "allmodconfig"
build:
fs/built-in.o: In function `xfs_file_dax_read':
fs/xfs/xfs_file.c:348: undefined reference to `dax_do_io'
fs/built-in.o: In function `xfs_file_dax_write':
fs/xfs/xfs_file.c:758: undefined reference to `dax_do_io'
Marking the two functions 'static noinline' instead of 'STATIC' will let
the compiler drop the symbols when there are no callers but avoid the
implicit inlining.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 16d4d43595b4 ("xfs: split direct I/O and DAX path")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
XFS has had scattered reports of delalloc blocks present at
->releasepage() time. This results in a warning with a stack trace
similar to the following:
...
Call Trace:
[<ffffffffa23c5b8f>] dump_stack+0x63/0x84
[<ffffffffa20837a7>] warn_slowpath_common+0x97/0xe0
[<ffffffffa208380a>] warn_slowpath_null+0x1a/0x20
[<ffffffffa2326caf>] xfs_vm_releasepage+0x10f/0x140
[<ffffffffa218c680>] ? page_mkclean_one+0xd0/0xd0
[<ffffffffa218d3a0>] ? anon_vma_prepare+0x150/0x150
[<ffffffffa21521c2>] try_to_release_page+0x32/0x50
[<ffffffffa2166b2e>] shrink_active_list+0x3ce/0x3e0
[<ffffffffa21671c7>] shrink_lruvec+0x687/0x7d0
[<ffffffffa21673ec>] shrink_zone+0xdc/0x2c0
[<ffffffffa2168539>] kswapd+0x4f9/0x970
[<ffffffffa2168040>] ? mem_cgroup_shrink_node_zone+0x1a0/0x1a0
[<ffffffffa20a0d99>] kthread+0xc9/0xe0
[<ffffffffa20a0cd0>] ? kthread_stop+0x100/0x100
[<ffffffffa26b404f>] ret_from_fork+0x3f/0x70
[<ffffffffa20a0cd0>] ? kthread_stop+0x100/0x100
This occurs because it is possible for shrink_active_list() to send
pages marked dirty to ->releasepage() when certain buffer_head threshold
conditions are met. shrink_active_list() doesn't check the page dirty
state apparently to handle an old ext3 corner case where in some cases
clean pages would not have the dirty bit cleared, thus it is up to the
filesystem to determine how to handle the page.
XFS currently handles the delalloc case properly, but this behavior
makes the warning spurious. Update the XFS ->releasepage() handler to
explicitly skip dirty pages. Retain the existing delalloc/unwritten
checks so we continue to warn if such buffers exist on clean pages when
they shouldn't.
Diagnosed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
|
|
|
|
|
|
|
|
Instead we always declare struct xfs_dir2_sf_hdr as packed. That's
the expected layout, and while most major architectures do the packing
by default the new structure size and offset checker showed that not
only the ARM old ABI got this wrong, but various minor embedded
architectures did as well.
[Verified that no code change on x86-64 results from this change]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
And use an array of unsigned char values directly to avoid problems
with architectures that pad the size of structures. This also gets
rid of the xfs_dir2_ino4_t and xfs_dir2_ino8_t types, and introduces
new constants for the size of 4 and 8 bytes as well as the size
difference between the two.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Just use an array of two unsigned chars directly to avoid problems
with architectures that pad the size of structures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
So far the DAX code overloaded the direct I/O code path. There is very little
in common between the two, and untangling them allows to clean up both variants.
As a side effect we also get separate trace points for both I/O types.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
We control both the callers and callees of ->direct_IO, so remove the
indirect calls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
XFS already implement it's own flushing of the pagecache because it
implements proper synchronization for direct I/O reads. This means
calling generic_file_read_iter for direct I/O is rather useless,
as it doesn't do much but updating the atime and iocb position for
us. This also gets rid of the buffered I/O fallback that isn't used
for XFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Similar to what we did on the write side a while ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
All the three low-level read implementations that we might call already
take care of not overflowing the maximum supported bytes, no need to
duplicate it here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Now that we have the direct I/O kiocb flag there is no real need to sample
the value inside of XFS, and the invis flag was always just partially used
and isn't worth keeping this infrastructure around for. This also splits
the read tracepoint into buffered vs direct as we've done for writes a long
time ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Instead check the file pointer for the invisble I/O flag directly, and
use the chance to drop redundant arguments from the xfs_ioc_space
prototype.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Newly allocated XFS metadata buffers are added to the LRU once the hold
count is released, which typically occurs after I/O completion. There is
no other mechanism at current that tracks the existence or I/O state of
a new buffer. Further, readahead I/O tends to be submitted
asynchronously by nature, which means the I/O can remain in flight and
actually complete long after the calling context is gone. This means
that file descriptors or any other holds on the filesystem can be
released, allowing the filesystem to be unmounted while I/O is still in
flight. When I/O completion occurs, core data structures may have been
freed, causing completion to run into invalid memory accesses and likely
to panic.
This problem is reproduced on XFS via directory readahead. A filesystem
is mounted, a directory is opened/closed and the filesystem immediately
unmounted. The open/close cycle triggers a directory readahead that if
delayed long enough, runs buffer I/O completion after the unmount has
completed.
To address this problem, add a mechanism to track all in-flight,
asynchronous buffers using per-cpu counters in the buftarg. The buffer
is accounted on the first I/O submission after the current reference is
acquired and unaccounted once the buffer is returned to the LRU or
freed. Update xfs_wait_buftarg() to wait on all in-flight I/O before
walking the LRU list. Once in-flight I/O has completed and the workqueue
has drained, all new buffers should have been released onto the LRU.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
The upcoming buftarg I/O accounting mechanism maintains a count of
all buffers that have undergone I/O in the current hold-release
cycle. Certain buffers associated with core infrastructure (e.g.,
the xfs_mount superblock buffer, log buffers) are never released,
however. This means that accounting I/O submission on such buffers
elevates the buftarg count indefinitely and could lead to lockup on
unmount.
Define a new buffer flag to explicitly exclude buffers from buftarg
I/O accounting. Set the flag on the superblock and associated log
buffers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
With the code as it stands today, b_retries never increments because
it gets reset to 0 in the error callback.
Remove that, and fix a similar problem where the first retry time
was constantly being overwritten, which defeated the timeout tunable
as well. We now only set first retry time if a non-zero timeout is
set, to match the behavior of only incrementing retries if a retry
value is set.
This way max retries & timeouts consistently take effect after a
tunable is set, rather than acting retroactively on a buffer which
has failed at some point in the past and has accumulated state from
those prior failures.
Thanks to dchinner for talking through this with me.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Fix up a couple places where extra flag manipulation occurs.
In the first case we clear XBF_ASYNC and then immediately reset it -
so don't bother clearing in the first place.
In the 2nd case we are at a point in the function where the buffer
must already be async, so there is no need to reset it.
Add consistent spacing around the " | " while we're at it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xfs_error_get_cfg() is called with bp->b_error as an arg, which is
negative, so the switch statement won't ever find any matches.
This results in only the default error handler having any effect, as
EIO/ENOSPC/ENODEV get ignored due to the wrong sign.
It seems simplest to always flip the error sign to positive, so that
we can handle either negative errors in bp->b_error, or possibly a
positive errno via something like xfs_error_get_cfg(EIO) - this
future-proofs the function.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
replace the magic numbers by offsetof(...) and sizeof(...), and add two
extra checks on xfs_check_ondisk_structs()
[dchinner: renamed header structures to be more descriptive]
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
The indentation in this function is different from the other functions.
Those spacebars are converted to tabs to improve readability.
Signed-off-by: Kaho Ng <ngkaho1234@gmail.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Errors go from zero which means no error to XFS_ERRTAG_MAX (22). My
static checker complains that xfs_errortag_add() puts an upper bound on
this but not a lower bound. Let's fix it by making it unsigned.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
When calling fdget() in xfs_ioc_swapext(), we need to verify that
the file descriptors passed into the ioctl point to XFS inodes
before we start operations on them. If we don't do this, we could be
referencing arbitrary kernel memory as an XFS inode. THis could lead
to memory corruption and/or performing locking operations on
attacker-chosen structures in kernel memory.
[dchinner: rewrite commit message ]
[dchinner: add comment explaining new check ]
Signed-off-by: Jann Horn <jann@thejh.net>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
|
|
Create a common function to calculate the maximum height of a per-AG
btree. This will eventually be used by the rmapbt and refcountbt
code to calculate appropriate maxlevels values for each. This is
important because the verifiers and the transaction block
reservations depend on accurate estimates of how many blocks are
needed to satisfy a btree split.
We were mistakenly using the max bnobt height for all the btrees,
which creates a dangerous situation since the larger records and
keys in an rmapbt make it very possible that the rmapbt will be
taller than the bnobt and so we can run out of transaction block
reservation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
In struct xfs_bmap_free, convert the open-coded free extent list to
a regular list, then use list_sort to sort it prior to processing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Break up xfs_free_extent() into a helper that fixes the freelist.
This helper will be used subsequently to ensure the freelist during
deferred rmap processing.
[darrick: refactor to put this at the head of the patchset]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
This is already in xfsprogs' libxfs, so port it to the kernel.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Currently we don't check the error_tag when someone's trying to set up
error injection testing. If userspace passes in a value we don't know
about, send back an error. This will help xfstests to _notrun a test
that uses error injection to test things like log replay.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Create a second buf_trylock tracepoint so that we can distinguish
between a successful and a failed trylock. With this piece, we can
use a script to look at the ftrace output to detect buffer deadlocks.
[dchinner: update to if/else as per hch's suggestion]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Some of the directory/attr structures contain variable-length objects,
so the enclosing structure doesn't have a meaningful fixed size at
compile time. We can check the offsets of the members before the
variable-length member, so do those.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
xfs_reserve_blocks() is responsible to update the XFS reserved block
pool count at mount time or based on user request. When the caller
requests to increase the reserve pool, blocks must be allocated from
the global counters such that they are no longer available for
general purpose use. If the requested reserve pool size is too
large, XFS reserves what blocks are available. The implementation
requires looking at the percpu counters and making an educated guess
as to how many blocks to try and allocate from xfs_mod_fdblocks(),
which can return -ENOSPC if the guess was not accurate due to
counters being modified in parallel.
xfs_reserve_blocks() retries the guess in this scenario until the
allocation succeeds or it is determined that there is no space
available in the fs. While not easily reproducible in the current
form, the retry code doesn't actually work correctly if
xfs_mod_fdblocks() actually fails. The problem is that the percpu
calculations use the m_resblks counter to determine how many blocks
to allocate, but unconditionally update m_resblks before the block
allocation has actually succeeded. Therefore, if xfs_mod_fdblocks()
fails, the code jumps to the retry label and uses the already
updated m_resblks value to determine how many blocks to try and
allocate. If the percpu counters previously suggested that the
entire request was available, fdblocks_delta could end up set to 0.
In that case, m_resblks is updated to the requested value, yet no
blocks have been reserved at all.
Refactor xfs_reserve_blocks() to use an explicit loop and make the
code easier to follow. Since we have to drop the spinlock across the
xfs_mod_fdblocks() call, use a delta value for m_resblks as well and
only apply the delta once allocation succeeds.
[dchinner: convert to do {} while() loop]
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
The filesystem quiesce sequence performs the operations necessary to
drain all background work, push pending transactions through the log
infrastructure and wait on I/O resulting from the final AIL push. We
have had reports of remount,ro hangs in xfs_log_quiesce() ->
xfs_wait_buftarg(), however, and some instrumentation code to detect
transaction commits at this point in the quiesce sequence has inculpated
the eofblocks background scanner as a cause.
While higher level remount code generally prevents user modifications by
the time the filesystem has made it to xfs_log_quiesce(), the background
scanner may still be alive and can perform pending work at any time. If
this occurs between the xfs_log_force() and xfs_wait_buftarg() calls
within xfs_log_quiesce(), this can lead to an indefinite lockup in
xfs_wait_buftarg().
To prevent this problem, cancel the background eofblocks scan worker
during the remount read-only quiesce sequence. This suspends background
trimming when a filesystem is remounted read-only. This is only done in
the remount path because the freeze codepath has already locked out new
transactions by the time the filesystem attempts to quiesce (and thus
waiting on an active work item could deadlock). Kick the eofblocks
worker to pick up where it left off once an fs is remounted back to
read-write.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
|
|
|
|
Instead punch the whole first, and the use the our zeroing helper
to punch out the edge blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
We now skip holes in it, so no need to have the caller do it as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
