summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-09-28ipv4: Allow configuring subnets as local addressesTom Herbert3-5/+6
This patch allows a host to be configured to respond to any address in a specified range as if it were local, without actually needing to configure the address on an interface. This is done through routing table configuration. For instance, to configure a host to respond to any address in 10.1/16 received on eth0 as a local address we can do: ip rule add from all iif eth0 lookup 200 ip route add local 10.1/16 dev lo proto kernel scope host src 127.0.0.1 table 200 This host is now reachable by any 10.1/16 address (route lookup on input for packets received on eth0 can find the route). On output, the rule will not be matched so that this host can still send packets to 10.1/16 (not sent on loopback). Presumably, external routing can be configured to make sense out of this. To make this work, we needed to modify the logic in finding the interface which is assigned a given source address for output (dev_ip_find). We perform a normal fib_lookup instead of just a lookup on the local table, and in the lookup we ignore the input interface for matching. This patch is useful to implement IP-anycast for subnets of virtual addresses. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-28pch_gbe: add header filesRandy Dunlap1-0/+2
Fix build errors, more header files needed. drivers/net/pch_gbe/pch_gbe_main.c:965: error: implicit declaration of function 'tcp_hdr' drivers/net/pch_gbe/pch_gbe_main.c:965: error: invalid type argument of '->' (have 'int') drivers/net/pch_gbe/pch_gbe_main.c:968: error: invalid type argument of '->' (have 'int') drivers/net/pch_gbe/pch_gbe_main.c:976: error: implicit declaration of function 'udp_hdr' drivers/net/pch_gbe/pch_gbe_main.c:976: error: invalid type argument of '->' (have 'int') drivers/net/pch_gbe/pch_gbe_main.c:980: error: invalid type argument of '->' (have 'int') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Documentation: Update Phonet doc for Pipe Controller implementationKumar Sanghvi1-0/+53
Updates the Phonet document with description related to Pipe controller implementation Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27tg3: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-2/+7
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-278021q: Use netif_copy_real_num_queues() to set queue countsBen Hutchings1-1/+1
This covers RX if necessary, as well as TX. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27sfc: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-1/+2
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27niu: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-1/+2
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27myri10ge: Use netif_set_real_num_{rx, tx}_queues()Ben Hutchings1-2/+3
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27mv643xx_eth: Use netif_set_real_num_{rx, tx}_queues()Ben Hutchings1-1/+2
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27mlx4_en: Use netif_set_real_num_{rx, tx}_queues()Ben Hutchings1-1/+2
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27ixgbe: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-5/+11
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27igb: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-4/+8
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27gianfar: Use netif_set_real_num_rx_queues()Ben Hutchings1-2/+1
Do not set num_tx_queues or real_num_tx_queues, since alloc_etherdev_mq() does that. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27cxgb4vf: Use netif_set_real_num_{rx, tx}_queues()Ben Hutchings1-1/+4
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27cxgb4: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-1/+4
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27cxgb3: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-1/+4
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27bnx2x: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-2/+4
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27bnx2: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-3/+6
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27net: Add netif_copy_real_num_queues() for use by virtual net driversBen Hutchings1-0/+12
This sets the active numbers of queues on a net device to match another. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27net: Allow changing number of RX queues after device allocationBen Hutchings4-19/+78
For RPS, we create a kobject for each RX queue based on the number of queues passed to alloc_netdev_mq(). However, drivers generally do not determine the numbers of hardware queues to use until much later, so this usually represents the maximum number the driver may use and not the actual number in use. For TX queues, drivers can update the actual number using netif_set_real_num_tx_queues(). Add a corresponding function for RX queues, netif_set_real_num_rx_queues(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27net: sk_{detach|attach}_filter() rcu fixesEric Dumazet1-6/+4
sk_attach_filter() and sk_detach_filter() are run with socket locked. Use the appropriate rcu_dereference_protected() instead of blocking BH, and rcu_dereference_bh(). There is no point adding BH prevention and memory barrier. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27fib: use atomic_inc_not_zero() in fib_rules_lookupEric Dumazet1-3/+5
It seems we dont use appropriate refcount increment in an rcu_read_lock() protected section. fib_rule_get() might increment a null refcount and bad things could happen. While fib_nl_delrule() respects an rcu grace period before calling fib_rule_put(), fib_rules_cleanup_ops() calls fib_rule_put() without a grace period. Note : after this patch, we might avoid the synchronize_rcu() call done in fib_nl_delrule() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27sit: percpu stats accountingEric Dumazet1-18/+64
Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27ipip: percpu stats accountingEric Dumazet1-34/+93
Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27ip_gre: percpu stats accountingEric Dumazet1-39/+104
Le lundi 27 septembre 2010 à 14:29 +0100, Ben Hutchings a écrit : > > diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c > > index 5d6ddcb..de39b22 100644 > > --- a/net/ipv4/ip_gre.c > > +++ b/net/ipv4/ip_gre.c > [...] > > @@ -377,7 +405,7 @@ static struct ip_tunnel *ipgre_tunnel_locate(struct net *net, > > if (parms->name[0]) > > strlcpy(name, parms->name, IFNAMSIZ); > > else > > - sprintf(name, "gre%%d"); > > + strcpy(name, "gre%d"); > > > > dev = alloc_netdev(sizeof(*t), name, ipgre_tunnel_setup); > > if (!dev) > [...] > > This is a valid fix, but doesn't belong in this patch! > Sorry ? It was not a fix, but at most a cleanup ;) Anyway I forgot the gretap case... [PATCH 2/4 v2] ip_gre: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27tunnels: prepare percpu accountingEric Dumazet3-10/+27
Tunnels are going to use percpu for their accounting. They are going to use a new tstats field in net_device. skb_tunnel_rx() is changed to be a wrapper around __skb_tunnel_rx() IPTUNNEL_XMIT() is changed to be a wrapper around __IPTUNNEL_XMIT() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27vlan: use this_cpu_ptr() in vlan_skb_recv()Eric Dumazet1-2/+2
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Phonet: Implement Pipe Controller to support Nokia Slim ModemsKumar Sanghvi4-6/+479
Phonet stack assumes the presence of Pipe Controller, either in Modem or on Application Processing Engine user-space for the Pipe data. Nokia Slim Modems like WG2.5 used in ST-Ericsson U8500 platform do not implement Pipe controller in them. This patch adds Pipe Controller implemenation to Phonet stack to support Pipe data over Phonet stack for Nokia Slim Modems. Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Merge branch 'master' of ↵David S. Miller67-214/+549
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/qlcnic/qlcnic_init.c net/ipv4/ip_output.c
2010-09-26net: r6040: store BIOS default MAC in perm_addOtavio Salvador1-0/+3
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26ipv6: add a missing unregister_pernet_subsys callNeil Horman3-3/+14
Clean up a missing exit path in the ipv6 module init routines. In addrconf_init we call ipv6_addr_label_init which calls register_pernet_subsys for the ipv6_addr_label_ops structure. But if module loading fails, or if the ipv6 module is removed, there is no corresponding unregister_pernet_subsys call, which leaves a now-bogus address on the pernet_list, leading to oopses in subsequent registrations. This patch cleans up both the failed load path and the unload path. Tested by myself with good results. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> include/net/addrconf.h | 1 + net/ipv6/addrconf.c | 11 ++++++++--- net/ipv6/addrlabel.c | 5 +++++ 3 files changed, 14 insertions(+), 3 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26net: loopback driver cleanupEric Dumazet2-17/+9
loopback driver uses dev->ml_priv to store its percpu stats pointer. It uses ugly casts "(void __percpu __force *)" to shut up sparse complains. Define an union to better document we use ml_priv in loopback driver and define a lstats field with appropriate types. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26net: fix rcu use in ip_route_output_slowEric Dumazet1-1/+1
__in_dev_get_rtnl(dev_out) is called while RTNL is not held, thus triggers a lockdep fault. At this point, we only perform a raw test of dev_out->ip_ptr being NULL, we dont need to make sure ip_ptr cant changed right after. We can use rcu_dereference_raw() for this. Reported-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26rps: allocate rx queues in register_netdevice onlyEric Dumazet1-44/+32
Instead of having two places were we allocate dev->_rx, introduce netif_alloc_rx_queues() helper and call it only from register_netdevice(), not from alloc_netdev_mq() Goal is to let drivers change dev->num_rx_queues after allocating netdev and before registering it. This also removes a lot of ifdefs in net/core/dev.c Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26s390: use free_netdev(netdev) instead of kfree()Vasiliy Kulikov1-2/+2
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26sgiseeq: use free_netdev(netdev) instead of kfree()Kulikov Vasiliy1-1/+1
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26rionet: use free_netdev(netdev) instead of kfree()Kulikov Vasiliy1-1/+1
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26ibm_newemac: use free_netdev(netdev) instead of kfree()Kulikov Vasiliy1-2/+2
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26net: update SOCK_MIN_RCVBUFEric Dumazet1-1/+5
SOCK_MIN_RCVBUF current value is 256 bytes It doesnt permit to receive the smallest possible frame, considering socket sk_rmem_alloc/sk_rcvbuf account skb truesizes. On 64bit arches, sizeof(struct sk_buff) is 240 bytes. Add the typical 64 bytes of headroom, and we go over the limit. With old kernels and 32bit arches, we were under the limit, if netdriver was doing copybreak. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26smsc911x: Add MODULE_ALIAS()Vincent Stehlé1-0/+1
This enables auto loading for the smsc911x ethernet driver. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26net: reset skb queue mapping when rx'ing over tunnelTom Herbert1-0/+1
Reset queue mapping when an skb is reentering the stack via a tunnel. On second pass, the queue mapping from the original device is no longer valid. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26drivers/net: return operator cleanupEric Dumazet106-764/+762
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26net: skb_frag_t can be smaller on small archesEric Dumazet1-0/+5
On 32bit arches, if PAGE_SIZE is smaller than 65536, we can use 16bit offset and size fields. This patch saves 72 bytes per skb on i386, or 128 bytes after rounding. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26br2684: fix scheduling while atomicKarl Hiramoto1-10/+2
You can't call atomic_notifier_chain_unregister() while in atomic context. Fix, call un/register_atmdevice_notifier in module __init and __exit. Bug report: http://comments.gmane.org/gmane.linux.network/172603 Reported-by: Mikko Vinni <mmvinni@yahoo.com> Tested-by: Mikko Vinni <mmvinni@yahoo.com> Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26net: propagate NETIF_F_HIGHDMA to vlansEric Dumazet1-3/+4
Automatically allows vlans to get NETIF_F_HIGHDMA if underlying device supports it. On 32bit arches (and more precisely if CONFIG_HIGHMEM is enabled), it can help to reduce cost of illegal_highdma() and __skb_linearize() calls. Tested on tg3 , bnx2, bonding, this worked very well. This is a generalization of a patch provided by Yi Zou & Jeff Kirsher. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26de2104x: fix TP link detectionOndrej Zary1-2/+21
Compex FreedomLine 32 PnP-PCI2 cards have only TP and BNC connectors but the SROM contains AUI port too. When TP loses link, the driver switches to non-existing AUI port (which reports that carrier is always present). Connecting TP back generates LinkPass interrupt but de_media_interrupt() is broken - it only updates the link state of currently connected media, ignoring the fact that LinkPass and LinkFail bits of MacStatus register belong to the TP port only (the chip documentation says that). This patch changes de_media_interrupt() to switch media to TP when link goes up (and media type is not locked) and also to update the link state only when the TP port is used. Also the NonselPortActive (and also SelPortActive) bits of SIAStatus register need to be cleared (by writing 1) after reading or they're useless. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26de2104x: fix power managementOndrej Zary1-0/+3
At least my 21041 cards come out of suspend with bus mastering disabled so they did not work after resume(no data transferred). After adding pci_set_master(), the driver oopsed immediately on resume - because de_clean_rings() is called on suspend but de_init_rings() call was missing in resume. Also disable link (reset SIA) before sleep (de4x5 does this too). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-24ixgbevf: Refactor ring parameter re-sizeGreg Rose1-74/+79
The function to resize the Tx/Rx rings had the potential to dereference a NULL pointer and the code would attempt to resize the Tx ring even if the Rx ring allocation had failed. This would cause some confusion in the return code semantics. Fixed up to just unwind the allocations if any of them fail and return an error. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-24de2104x: disable autonegotiation on broken hardwareOndrej Zary1-2/+10
At least on older 21041-AA chips (mine is rev. 11), TP duplex autonegotiation causes the card not to work at all (link is up but no packets are transmitted). de4x5 disables autonegotiation completely. But it seems to work on newer (21041-PA rev. 21) so disable it only on rev<20 chips. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-24net: fix a lockdep splatEric Dumazet6-26/+26
We have for each socket : One spinlock (sk_slock.slock) One rwlock (sk_callback_lock) Possible scenarios are : (A) (this is used in net/sunrpc/xprtsock.c) read_lock(&sk->sk_callback_lock) (without blocking BH) <BH> spin_lock(&sk->sk_slock.slock); ... read_lock(&sk->sk_callback_lock); ... (B) write_lock_bh(&sk->sk_callback_lock) stuff write_unlock_bh(&sk->sk_callback_lock) (C) spin_lock_bh(&sk->sk_slock) ... write_lock_bh(&sk->sk_callback_lock) stuff write_unlock_bh(&sk->sk_callback_lock) spin_unlock_bh(&sk->sk_slock) This (C) case conflicts with (A) : CPU1 [A] CPU2 [C] read_lock(callback_lock) <BH> spin_lock_bh(slock) <wait to spin_lock(slock)> <wait to write_lock_bh(callback_lock)> We have one problematic (C) use case in inet_csk_listen_stop() : local_bh_disable(); bh_lock_sock(child); // spin_lock_bh(&sk->sk_slock) WARN_ON(sock_owned_by_user(child)); ... sock_orphan(child); // write_lock_bh(&sk->sk_callback_lock) lockdep is not happy with this, as reported by Tetsuo Handa It seems only way to deal with this is to use read_lock_bh(callbacklock) everywhere. Thanks to Jarek for pointing a bug in my first attempt and suggesting this solution. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jarek Poplawski <jarkao2@gmail.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 01:47:48 +0000