| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is no particular reason to not enable TSC page clocksource on
32-bit. mul_u64_u64_shr() is available and despite the increased
computational complexity (compared to 64bit) TSC page is still a huge win
compared to MSR-based clocksource.
In-kernel reads:
MSR based clocksource: 3361 cycles
TSC page clocksource: 49 cycles
Reads from userspace (utilizing vDSO in case of TSC page):
MSR based clocksource: 5664 cycles
TSC page clocksource: 131 cycles
Enabling TSC page on 32bits allows to get rid of CONFIG_HYPERV_TSCPAGE as
it is now not any different from CONFIG_HYPERV_TIMER.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lkml.kernel.org/r/20190822083630.17059-1-vkuznets@redhat.com
|
|
Hyper-V guests use the default native_sched_clock() in
pv_ops.time.sched_clock on x86. But native_sched_clock() directly uses the
raw TSC value, which can be discontinuous in a Hyper-V VM.
Add the generic hv_setup_sched_clock() to set the sched clock function
appropriately. On x86, this sets pv_ops.time.sched_clock to read the
Hyper-V reference TSC value that is scaled and adjusted to be continuous.
Also move the Hyper-V reference TSC initialization much earlier in the boot
process so no discontinuity is observed when pv_ops.time.sched_clock
calculates its offset.
[ tglx: Folded build fix ]
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lkml.kernel.org/r/20190814123216.32245-3-Tianyu.Lan@microsoft.com
|
|
Prepare to add Hyper-V sched clock callback and move Hyper-V Reference TSC
initialization much earlier in the boot process. Earlier initialization is
needed so that it happens while the timestamp value is still 0 and no
discontinuity in the timestamp will occur when pv_ops.time.sched_clock
calculates its offset.
The earlier initialization requires that the Hyper-V TSC page be allocated
statically instead of with vmalloc(), so fixup the references to the TSC
page and the method of getting its physical address.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20190814123216.32245-2-Tianyu.Lan@microsoft.com
|
|
It's always current. Don't give people wrong ideas.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190819143801.945469967@linutronix.de
|
|
Warning when p == NULL and then proceeding and dereferencing p does not
make any sense as the kernel will crash with a NULL pointer dereference
right away.
Bailing out when p == NULL and returning an error code does not cure the
underlying problem which caused p to be NULL. Though it might allow to
do proper debugging.
Same applies to the clock id check in set_process_cpu_timer().
Clean them up and make them return without trying to do further damage.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190819143801.846497772@linutronix.de
|
|
migration_base is used as a placeholder when an hrtimer is migrated to a
different CPU. In the case that hrtimer_cancel_wait_running() hits a timer
which is currently migrated it would pointlessly acquire the expiry lock of
the migration base, which is even not initialized.
Surely it could be initialized, but there is absolutely no point in
acquiring this lock because the timer is guaranteed not to run it's
callback for which the caller waits to finish on that base. So it would
just do the inc/lock/dec/unlock dance for nothing.
As the base switch is short and non-preemptible, there is no issue when the
wait function returns immediately.
The timer base and base->cpu_base cannot be NULL in the code path which is
invoking that, so just replace those checks with a check whether base is
migration base.
[ tglx: Updated from RT patch. Massaged changelog. Added comment. ]
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190821092409.13225-4-julien.grall@arm.com
|
|
The update to timer->base is protected by the base->cpu_base->lock().
However, hrtimer_cancel_wait_running() does access it lockless. So the
compiler is allowed to refetch timer->base which can cause havoc when the
timer base is changed concurrently.
Use READ_ONCE() to prevent this.
[ tglx: Adapted from a RT patch ]
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190821092409.13225-2-julien.grall@arm.com
|
|
The comment above cleanup_timers() is outdated. The timers are only removed
from the task/process list heads but not modified in any other way.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190819143801.747233612@linutronix.de
|
|
rtc.h is not needed in alarmtimers when a forward declaration of struct
rtc_device is provided. That allows to include posix-timers.h without
adding more includes to alarmtimer.h or creating circular include
dependencies.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190819143801.565389536@linutronix.de
|
|
- Rename struct siginfo to kernel_siginfo as that is used and required
- Add a forward declaration for task_struct and remove sched.h include
- Remove timex.h include as it is not needed
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190819143801.472005793@linutronix.de
|
|
The handling of a priority inversion between timer cancelling and a a not
well defined possible preemption of softirq kthread is not very clear.
Especially in the posix timers side it's unclear why there is a specific RT
wait callback.
All the nice explanations can be found in the initial changelog of
f61eff83cec9 (hrtimer: Prepare support for PREEMPT_RT").
Extract the detailed informations from there and put it into comments.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190820132656.GC2093@lenoir
|
|
Posix timer delete retry loops are affected by the same priority inversion
and live lock issues as the other timers.
Provide a RT specific synchronization function which keeps a reference to
the timer by holding rcu read lock to prevent the timer from being freed,
dropping the timer lock and invoking the timer specific wait function via a
new callback.
This does not yet cover posix CPU timers because they need more special
treatment on PREEMPT_RT.
[ This is folded into the original attempt which did not use a callback. ]
Originally-by: Anna-Maria Gleixenr <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190819143801.656864506@linutronix.de
|
|
Timer deletion on PREEMPT_RT is prone to priority inversion and live
locks. The hrtimer code has a synchronization mechanism for this. Posix CPU
timers will grow one.
But that mechanism cannot be invoked while holding the k_itimer lock
because that can deadlock against the running timer callback. So the lock
must be dropped which allows the timer to be freed.
The timer free can be prevented by taking RCU readlock before dropping the
lock, but because the rcu_head is part of the 'it' union a concurrent free
will overwrite the hrtimer on which the task is trying to synchronize.
Move the rcu_head out of the union to prevent this.
[ tglx: Fixed up kernel-doc. Rewrote changelog ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190730223828.965541887@linutronix.de
|
|
As a preparatory step for adding the PREEMPT RT specific synchronization
mechanism to wait for a running timer callback, rework the timer cancel
retry loops so they call a common function. This allows trivial
substitution in one place.
Originally-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190730223828.874901027@linutronix.de
|
|
do_timer_settime() has a 'flags' argument and uses 'flag' for the interrupt
flags, which is confusing at best.
Rename the argument so 'flags' can be used for interrupt flags as usual.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190730223828.782664411@linutronix.de
|
|
Use the hrtimer_cancel_wait_running() synchronization mechanism to prevent
priority inversion and live locks on PREEMPT_RT.
As a benefit the retry loop gains the missing cpu_relax() on !RT.
[ tglx: Split out of combo patch ]
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190730223828.690771827@linutronix.de
|
|
Use the hrtimer_cancel_wait_running() synchronization mechanism to prevent
priority inversion and live locks on PREEMPT_RT.
[ tglx: Split out of combo patch ]
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190730223828.600085866@linutronix.de
|
|
Use the hrtimer_cancel_wait_running() synchronization mechanism to prevent
priority inversion and live locks on PREEMPT_RT.
[ tglx: Split out of combo patch ]
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190730223828.508744705@linutronix.de
|
|
SCHED_DEADLINE inactive timer needs to run in hardirq context (as
dl_task_timer already does) on PREEMPT_RT
Change the mode to HRTIMER_MODE_REL_HARD.
[ tglx: Fixed up the start site, so mode debugging works ]
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190731103715.4047-1-juri.lelli@redhat.com
|
|
When PREEMPT_RT is enabled, the soft interrupt thread can be preempted. If
the soft interrupt thread is preempted in the middle of a timer callback,
then calling del_timer_sync() can lead to two issues:
- If the caller is on a remote CPU then it has to spin wait for the timer
handler to complete. This can result in unbound priority inversion.
- If the caller originates from the task which preempted the timer
handler on the same CPU, then spin waiting for the timer handler to
complete is never going to end.
To avoid these issues, add a new lock to the timer base which is held
around the execution of the timer callbacks. If del_timer_sync() detects
that the timer callback is currently running, it blocks on the expiry
lock. When the callback is finished, the expiry lock is dropped by the
softirq thread which wakes up the waiter and the system makes progress.
This addresses both the priority inversion and the life lock issues.
This mechanism is not used for timers which are marked IRQSAFE as for those
preemption is disabled accross the callback and therefore this situation
cannot happen. The callbacks for such timers need to be individually
audited for RT compliance.
The same issue can happen in virtual machines when the vCPU which runs a
timer callback is scheduled out. If a second vCPU of the same guest calls
del_timer_sync() it will spin wait for the other vCPU to be scheduled back
in. The expiry lock mechanism would avoid that. It'd be trivial to enable
this when paravirt spinlocks are enabled in a guest, but it's not clear
whether this is an actual problem in the wild, so for now it's an RT only
mechanism.
As the softirq thread can be preempted with PREEMPT_RT=y, the SMP variant
of del_timer_sync() needs to be used on UP as well.
[ tglx: Refactored it for mainline ]
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.832418500@linutronix.de
|
|
When PREEMPT_RT is enabled, the soft interrupt thread can be preempted. If
the soft interrupt thread is preempted in the middle of a timer callback,
then calling hrtimer_cancel() can lead to two issues:
- If the caller is on a remote CPU then it has to spin wait for the timer
handler to complete. This can result in unbound priority inversion.
- If the caller originates from the task which preempted the timer
handler on the same CPU, then spin waiting for the timer handler to
complete is never going to end.
To avoid these issues, add a new lock to the timer base which is held
around the execution of the timer callbacks. If hrtimer_cancel() detects
that the timer callback is currently running, it blocks on the expiry
lock. When the callback is finished, the expiry lock is dropped by the
softirq thread which wakes up the waiter and the system makes progress.
This addresses both the priority inversion and the life lock issues.
The same issue can happen in virtual machines when the vCPU which runs a
timer callback is scheduled out. If a second vCPU of the same guest calls
hrtimer_cancel() it will spin wait for the other vCPU to be scheduled back
in. The expiry lock mechanism would avoid that. It'd be trivial to enable
this when paravirt spinlocks are enabled in a guest, but it's not clear
whether this is an actual problem in the wild, so for now it's an RT only
mechanism.
[ tglx: Refactored it for mainline ]
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.737767218@linutronix.de
|
|
On PREEMPT_RT enabled kernels hrtimers which are not explicitely marked for
hard interrupt expiry mode are moved into soft interrupt context either for
latency reasons or because the hrtimer callback takes regular spinlocks or
invokes other functions which are not suitable for hard interrupt context
on PREEMPT_RT.
The hrtimer_sleeper callback is RT compatible in hard interrupt context,
but there is a latency concern: Untrusted userspace can spawn many threads
which arm timers for the same expiry time on the same CPU. On expiry that
causes a latency spike due to the wakeup of a gazillion threads.
OTOH, priviledged real-time user space applications rely on the low latency
of hard interrupt wakeups. These syscall related wakeups are all based on
hrtimer sleepers.
If the current task is in a real-time scheduling class, mark the mode for
hard interrupt expiry.
[ tglx: Split out of a larger combo patch. Added changelog ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.645792403@linutronix.de
|
|
On PREEMPT_RT not all hrtimers can be expired in hard interrupt context
even if that is perfectly fine on a PREEMPT_RT=n kernel, e.g. because they
take regular spinlocks. Also for latency reasons PREEMPT_RT tries to defer
most hrtimers' expiry into softirq context.
hrtimers marked with HRTIMER_MODE_HARD must be kept in hard interrupt
context expiry mode. Add the required logic.
No functional change for PREEMPT_RT=n kernels.
[ tglx: Split out of a larger combo patch. Added changelog ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.551967692@linutronix.de
|
|
The tick related hrtimers, which drive the scheduler tick and hrtimer based
broadcasting are required to expire in hard interrupt context for obvious
reasons.
Mark them so PREEMPT_RT kernels wont move them to soft interrupt expiry.
Make the horribly formatted RCU_NONIDLE bracket maze readable while at it.
No functional change,
[ tglx: Split out from larger combo patch. Add changelog ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.459144407@linutronix.de
|
|
On PREEMPT_RT enabled kernels unmarked hrtimers are moved into soft
interrupt expiry mode by default.
While that's not a functional requirement for the KVM local APIC timer
emulation, it's a latency issue which can be avoided by marking the timer
so hard interrupt context expiry is enforced.
No functional change.
[ tglx: Split out from larger combo patch. Add changelog. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.363363474@linutronix.de
|
|
The watchdog hrtimer must expire in hard interrupt context even on
PREEMPT_RT=y kernels as otherwise the hard/softlockup detection logic would
not work.
No functional change.
[ tglx: Split out from larger combo patch. Added changelog ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.262895510@linutronix.de
|
|
To guarantee that the multiplexing mechanism and the hrtimer driven events
work on PREEMPT_RT enabled kernels it's required that the related hrtimers
expire in hard interrupt context. Mark them so PREEMPT_RT kernels wont
defer them to soft interrupt context.
No functional change.
[ tglx: Split out of larger combo patch. Added changelog ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.169509224@linutronix.de
|
|
The scheduler related hrtimers need to expire in hard interrupt context
even on PREEMPT_RT enabled kernels. Mark then as such.
No functional change.
[ tglx: Split out from larger combo patch. Add changelog. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.077004842@linutronix.de
|
|
hrtimer_start_range_ns() has a WARN_ONCE() which verifies that a timer
which is marker for softirq expiry is not queued in the hard interrupt base
and vice versa.
When PREEMPT_RT is enabled, timers which are not explicitely marked to
expire in hard interrupt context are deferrred to the soft interrupt. So
the regular check would trigger.
Change the check, so when PREEMPT_RT is enabled, it is verified that the
timers marked for hard interrupt expiry are not tried to be queued for soft
interrupt expiry or any of the unmarked and softirq marked is tried to be
expired in hard interrupt context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
On PREEMPT_RT not all hrtimers can be expired in hard interrupt context
even if that is perfectly fine on a PREEMPT_RT=n kernel, e.g. because they
take regular spinlocks. Also for latency reasons PREEMPT_RT tries to defer
most hrtimers' expiry into soft interrupt context.
But there are hrtimers which must be expired in hard interrupt context even
when PREEMPT_RT is enabled:
- hrtimers which must expiry in hard interrupt context, e.g. scheduler,
perf, watchdog related hrtimers
- latency critical hrtimers, e.g. nanosleep, ..., kvm lapic timer
Add a new mode flag HRTIMER_MODE_HARD which allows to mark these timers so
PREEMPT_RT will not move them into softirq expiry mode.
[ tglx: Split out of a larger combo patch. Added changelog ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185752.981398465@linutronix.de
|
|
hrtimer_sleepers will gain a scheduling class dependent treatment on
PREEMPT_RT. Use the new hrtimer_sleeper_start_expires() function to make
that possible.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
hrtimer_sleepers will gain a scheduling class dependent treatment on
PREEMPT_RT. Create a wrapper around hrtimer_start_expires() to make that
possible.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
hrtimer_init_sleeper() calls require prior initialisation of the hrtimer
object which is embedded into the hrtimer_sleeper.
Combine the initialization and spare a function call. Fixup all call sites.
This is also a preparatory change for PREEMPT_RT to do hrtimer sleeper
specific initializations of the embedded hrtimer without modifying any of
the call sites.
No functional change.
[ anna-maria: Minor cleanups ]
[ tglx: Adopted to the removal of the task argument of
hrtimer_init_sleeper() and trivial polishing.
Folded a fix from Stephen Rothwell for the vsoc code ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185752.887468908@linutronix.de
|
|
All callers hand in 'current' and that's the only task pointer which
actually makes sense. Remove the task argument and set current in the
function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185752.791885290@linutronix.de
|
|
Simplify the timerqueue code by using cached rbtrees and rely on the tree
leftmost node semantics to get the timer with earliest expiration time.
This is a drop in conversion, and therefore semantics remain untouched.
The runtime overhead of cached rbtrees is be pretty much the same as the
current head->next method, noting that when removing the leftmost node,
a common operation for the timerqueue, the rb_next(leftmost) is O(1) as
well, so the next timer will either be the right node or its parent.
Therefore no extra pointer chasing. Finally, the size of the struct
timerqueue_head remains the same.
Passes several hours of rcutorture.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190724152323.bojciei3muvfxalm@linux-r8p5
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix build issues when kprobes are enabled
- Speed up ITLB/DTLB cache flushes when running on machines with
combined TLBs
* 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines
parisc: add kprobe_fault_handler()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull preemption Kconfig fix from Thomas Gleixner:
"The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined
PREEMPT outside of the menu and made it selectable by both PREEMPT_LL
and PREEMPT_RT.
Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which
obviously can't work anymore. oldconfig builds are affected as well,
but it's more obvious as the user gets asked. [old]defconfig silently
fixes it up and selects PREEMPT_NONE.
Unbreak it by undoing the rename and adding a intermediate config
symbol which is selected by both PREEMPT and PREEMPT_RT. That requires
to chase down a few #ifdefs, but it's better than tweaking 114
defconfigs and annoying users"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd polling fix from Christian Brauner:
"A fix for pidfd polling. It ensures that the task's exit state is
visible to all waiters"
* tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
pidfd: fix a poll race when setting exit_state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixes for leaks caused by recently merged patches
- one build fix
- a fix to prevent mixing of incompatible features
* tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't leak extent_map in btrfs_get_io_geometry()
btrfs: free checksum hash on in close_ctree
btrfs: Fix build error while LIBCRC32C is module
btrfs: inode: Don't compress if NODATASUM or NODATACOW set
|
|
The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to
CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y
set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on
the preemption mode choice wich defaults to NONE. This also affects
oldconfig builds.
So rather than changing 114 defconfig files and being an annoyance to
users, revert the rename and select a new config symbol PREEMPTION. That
keeps everything working smoothly and the revelant ifdef's are going to be
fixed up step by step.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: a50a3f4b6a31 ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"For two regressions in media core:
- v4l2-subdev: fix regression in check_pad()
- videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already
in use"
* tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use
media: v4l2-subdev: fix regression in check_pad()
|
|
Pull networking fixes from David Miller:
1) Several netfilter fixes including a nfnetlink deadlock fix from
Florian Westphal and fix for dropping VRF packets from Miaohe Lin.
2) Flow offload fixes from Pablo Neira Ayuso including a fix to restore
proper block sharing.
3) Fix r8169 PHY init from Thomas Voegtle.
4) Fix memory leak in mac80211, from Lorenzo Bianconi.
5) Missing NULL check on object allocation in cxgb4, from Navid
Emamdoost.
6) Fix scaling of RX power in sfp phy driver, from Andrew Lunn.
7) Check that there is actually an ip header to access in skb->data in
VRF, from Peter Kosyh.
8) Remove spurious rcu unlock in hv_netvsc, from Haiyang Zhang.
9) One more tweak the the TCP fragmentation memory limit changes, to be
less harmful to applications setting small SO_SNDBUF values. From
Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
tcp: be more careful in tcp_fragment()
hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback()
vrf: make sure skb->data contains ip header to make routing
connector: remove redundant input callback from cn_dev
qed: Prefer pcie_capability_read_word()
igc: Prefer pcie_capability_read_word()
cxgb4: Prefer pcie_capability_read_word()
be2net: Synchronize be_update_queues with dev_watchdog
bnx2x: Prevent load reordering in tx completion processing
net: phy: sfp: hwmon: Fix scaling of RX power
net: sched: verify that q!=NULL before setting q->flags
chelsio: Fix a typo in a function name
allocate_flower_entry: should check for null deref
net: hns3: typo in the name of a constant
kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist.
tipc: Fix a typo
mac80211: don't warn about CW params when not using them
mac80211: fix possible memory leak in ieee80211_assign_beacon
nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN
nl80211: fix VENDOR_CMD_RAW_DATA
...
|
|
There is a race between reading task->exit_state in pidfd_poll and
writing it after do_notify_parent calls do_notify_pidfd. Expected
sequence of events is:
CPU 0 CPU 1
------------------------------------------------
exit_notify
do_notify_parent
do_notify_pidfd
tsk->exit_state = EXIT_DEAD
pidfd_poll
if (tsk->exit_state)
However nothing prevents the following sequence:
CPU 0 CPU 1
------------------------------------------------
exit_notify
do_notify_parent
do_notify_pidfd
pidfd_poll
if (tsk->exit_state)
tsk->exit_state = EXIT_DEAD
This causes a polling task to wait forever, since poll blocks because
exit_state is 0 and the waiting task is not notified again. A stress
test continuously doing pidfd poll and process exits uncovered this bug.
To fix it, we make sure that the task's exit_state is always set before
calling do_notify_pidfd.
Fixes: b53b0b9d9a6 ("pidfd: add polling support")
Cc: kernel-team@android.com
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20190717172100.261204-1-joel@joelfernandes.org
[christian@brauner.io: adapt commit message and drop unneeded changes from wait_task_zombie]
Signed-off-by: Christian Brauner <christian@brauner.io>
|
|
Some applications set tiny SO_SNDBUF values and expect
TCP to just work. Recent patches to address CVE-2019-11478
broke them in case of losses, since retransmits might
be prevented.
We should allow these flows to make progress.
This patch allows the first and last skb in retransmit queue
to be split even if memory limits are hit.
It also adds the some room due to the fact that tcp_sendmsg()
and tcp_sendpage() might overshoot sk_wmem_queued by about one full
TSO skb (64KB size). Note this allowance was already present
in stable backports for kernels < 4.15
Note for < 4.15 backports :
tcp_rtx_queue_tail() will probably look like :
static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk)
{
struct sk_buff *skb = tcp_send_head(sk);
return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk);
}
Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrew Prout <aprout@ll.mit.edu>
Tested-by: Andrew Prout <aprout@ll.mit.edu>
Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Christoph Paasch <cpaasch@apple.com>
Cc: Jonathan Looney <jtl@netflix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is an extra rcu_read_unlock left in netvsc_recv_callback(),
after a previous patch that removes RCU from this function.
This patch removes the extra RCU unlock.
Fixes: 345ac08990b8 ("hv_netvsc: pass netvsc_device to receive callback")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing
using ip/ipv6 addresses, but don't make sure the header is available
in skb->data[] (skb_headlen() is less then header size).
Case:
1) igb driver from intel.
2) Packet size is greater then 255.
3) MPLS forwards to VRF device.
So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound()
functions.
Signed-off-by: Peter Kosyh <p.kosyh@gmail.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A small cleanup: this callback is never used.
Originally fixed by Stanislav Kinsburskiy <skinsbursky@virtuozzo.com>
for OpenVZ7 bug OVZ-6877
cc: stanislav.kinsburskiy@gmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.
Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.
Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
