summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-05-20USB: Add a new quirk: USB_QUIRK_HONOR_BNUMINTERFACESHans de Goede3-2/+22
Add a new quirk USB_QUIRK_HONOR_BNUMINTERFACES, when this quirk is set and a device has more interface descriptors in a configuration then it claims to have in config->bNumInterfaces, ignore all additional interfaces. This is needed for devices which try to hide unused interfaces by only lowering config->bNumInterfaces, and which can't handle if you try to talk to the "hidden" interfaces. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb: fix serial build when SYSRQ is disabledRandy Dunlap1-0/+9
Fix build error when CONFIG_MAGIC_SYSRQ is not enabled: drivers/usb/serial/generic.c:566: error: implicit declaration of function 'handle_sysrq' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB Serial Driver: ZIO MotherboardVijay Kumar3-0/+73
Add ZIO Motherboard USB serial interface driver. Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb-console: pass baud from console to the initial tty openJason Wessel1-12/+10
The usb console code has had a long standing problem of not being able to pass the baud rate from the kernel argument console=ttyUSB0,BAUD down to the initial tty open, unless you were willing to settle for 9600 baud. The solution is to directly use tty_init_termios() in usb_console_setup() as this will preserve any changes to the initial termios setting on future opens. CC: Alan Cox <alan@linux.intel.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: f_mass_storage: dynamic buffers for better alignmentMichal Nazarewicz1-5/+18
"Static" buffers in fsg_buffhd structure (ie. fields which are arrays rather then pointers to dynamically allocated memory) are not aligned to any "big" power of two which may lead to poor DMA performance (copying "by hand" of head or tail) or no DMA at all even if otherwise hardware supports it. Therefore, this patch makes mass storage function use kmalloc()ed buffers which are (because of their size) page aligned (which should be enough for any hardware). Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb: musb: hsdma: use musb_read/writelFelipe Balbi1-13/+3
... and simplify the was we read/write from/to DMA COUNT register. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb: musb: gadget: support musb-specific test modesFelipe Balbi1-0/+25
we can support the musb-specific test modes on the vendor specific range of test selector as stated on USB Specification Table 9-7 Test Mode Selectors. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb: musb: add debugfs supportFelipe Balbi4-0/+317
for now only a simple register dump entry (which can be rather useful on debugging) and a way to start test modes. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: musb: allow the Blackfin vrsel gpio to be active lowCliff Cai2-4/+5
Rather than hardcoding the gpio levels for vrsel, allow the platform resources to handle this so boards can be active high or low. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: MUSB: Add OMAP4 support in MUSB driverMaulik Mankad2-4/+8
This patch adds CONFIG_ARCH_OMAP4 macro within MUSB driver. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: MUSB: Build MUSB driver for OMAP4Maulik Mankad2-1/+9
This patch updates the Makefile to build the MUSB driver for OMAP4. It also sets the Kconfig options for OMAP4. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb: musb: Set transceiver interface typeMaulik Mankad6-7/+16
Program the OTG_INTERFSEL register based on transcevier type passed from board file. Adapt signature of musb_platform_init() function for davinci, blackfin and tusb6010. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb: musb: allow board to pass down fifo modeFelipe Balbi2-20/+51
boards might want to optimize their fifo configuration to the particular needs of that specific board. Allow that by moving all related data structures to <linux/usb/musb.h> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb-serial: Use tty_port version console instead of usb_serial_portJason Wessel6-11/+8
Replace all instances of using the console variable in struct usb_serial_port with the struct tty_port version. CC: Alan Cox <alan@linux.intel.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oliver@neukum.org> CC: Andrew Morton <akpm@linux-foundation.org> CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: ehci-au1xxx does not need EHCI IO watchdogManuel Lauss1-1/+10
I've been running variations of this patch for well over a year now; my usual zoo of test devices didn't trigger any ill effects even under heavy load. As a nice sideeffect idle-wakeups are reduced from 20/s to about 2/s (EHCI hub with mouse and kbd). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: remove uses of URB_NO_SETUP_DMA_MAPAlan Stern13-75/+27
This patch (as1350) removes all usages of coherent buffers for USB control-request setup-packet buffers. There's no good reason to reserve coherent memory for these things; control requests are hardly ever used in large quantity (the major exception is firmware transfers, and they aren't time-critical). Furthermore, only seven drivers used it. We might as well always use streaming DMA mappings for setup-packet buffers, and remove some extra complexity from usbcore. The DMA-mapping portion of hcd.c is currently in flux. A separate patch will be submitted to remove support for URB_NO_SETUP_DMA_MAP after everything else settles down. The removal should go smoothly, as by then nobody will be using it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: straighten out port feature vs. port status usageAlan Stern10-90/+89
This patch (as1349b) clears up the confusion in many USB host controller drivers between port features and port statuses. In mosty cases it's true that the status bit is in the position given by the corresponding feature value, but that's not always true and it's not guaranteed in the USB spec. There's no functional change, just replacing expressions of the form (1 << USB_PORT_FEAT_x) with USB_PORT_STAT_x, which has the same value. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: remove bogus USB_PORT_FEAT_*_SPEED symbolsAlan Stern8-27/+23
This patch (as1348) removes the bogus USB_PORT_FEAT_{HIGHSPEED,SUPERSPEED} symbols from ch11.h. No such features are defined by the USB spec. (There is a PORT_LOWSPEED feature, but the spec doesn't mention it except to say that host software should never use it.) The speed indicators are port statuses, not port features. As a temporary workaround for the xhci-hcd driver, a fictional USB_PORT_STAT_SUPER_SPEED symbol is added. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in drivers/usb/core/hcd.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: Remove large struct from the stack in USB storage isd200 driverIan Munsie1-2/+2
The compiler throws the following warning when compiling for a PowerPC 64 bit machine: drivers/usb/storage/isd200.c:580: warning: the frame size of 2208 bytes is larger than 2048 bytes There is a struct scsi_device which is placed on the stack and is largely responsible for such wastage. The struct is just a dummy struct filled with NULLs and set as the scsi_cmnd->device to make the usb_stor_Bulk_transport function happy. This patch makes the struct static, so that it is never placed onto the stack and silences the compiler warning. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: cdc-acm: make bitfields unsignedRandy Dunlap1-2/+2
Fix usb/class sparse warnings: drivers/usb/class/cdc-acm.h:128:34: error: dubious one-bit signed bitfield drivers/usb/class/cdc-acm.h:129:24: error: dubious one-bit signed bitfield Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: sisusbvga: Remove the BKL from ioctlAlessio Igor Bogani1-3/+1
Seems to me that BKL is not needed here because necessary locking is already provided by mutex sisusb->lock. Also change the returned value to long. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: split hub.h into ch11.h and merge-in hcd.hEric Lescouet2-41/+43
Base on inputs from Alan Stern, split the hub.h header into: - new ch11.h header (most of it) containing constants and structures from chapter 11 of the USB 2.0 spec. - a small remaining part being merged into hcd.h. Signed-of-by: Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: make hub.h public (drivers dependency)Eric Lescouet2-1/+1
The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hub.h from drivers/usb/core into include/linux/usb/ Signed-of-by: Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: make hcd.h public (drivers dependency)Eric Lescouet43-52/+46
The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hcd.h from drivers/usb/core into include/linux/usb/ Signed-of-by: Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: xhci: Fix check for room on the ring.Sarah Sharp1-1/+18
The length of the scatter gather list a driver can enqueue is limited by the bus' sg_tablesize to 62 entries. Each entry will be described by at least one transfer request block (TRB). If the entry's buffer crosses a 64KB boundary, then that entry will have to be described by two or more TRBs. So even if the USB device driver respects sg_tablesize, the whole scatter list may take more than 62 TRBs to describe, and won't fit on the ring. Don't assume that an empty ring means there is enough room on the transfer ring. The old code would unconditionally queue this too-large transfer, and over write the beginning of the transfer. This would mean the cycle bit was unchanged in those overwritten transfers, causing the hardware to think it didn't own the TRBs, and the host would seem to hang. Now drivers may see submit_urb() fail with -ENOMEM if the transfers are too big to fit on the ring. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: xhci: Limit bus sg_tablesize to 62 TRBs.Sarah Sharp1-1/+1
When a scatter-gather list is enqueued to the xHCI driver, it translates each entry into a transfer request block (TRB). Only 63 TRBs can be used per ring segment, and there must be one additional TRB reserved to make sure the hardware does not think the ring is empty (so the enqueue pointer doesn't equal the dequeue pointer). Limit the bus sg_tablesize to 62 TRBs. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: xhci: Fix issue with set interface after stall.Sarah Sharp2-0/+9
When the USB core installs a new interface, it unconditionally clears the halts on all the endpoints on the new interface. Usually the xHCI host needs to know when an endpoint is reset, so it can change its internal endpoint state. In this case, it doesn't care, because the endpoints were never halted in the first place. To avoid issuing a redundant Reset Endpoint command, the xHCI driver looks at xhci_virt_ep->stopped_td to determine if the endpoint was actually halted. However, the functions that handle the stall never set that variable to NULL after it dealt with the stall. So if an endpoint stalled and a Reset Endpoint command completed, and then the class driver tried to install a new alternate setting, the xHCI driver would access the old xhci_virt_ep->stopped_td pointer. A similar problem occurs if the endpoint has been stopped to cancel a transfer. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-16Linus 2.6.34Linus Torvalds1-1/+1
2010-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds5-81/+160
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: rtnetlink: make SR-IOV VF interface symmetric sctp: delete active ICMP proto unreachable timer when free transport tcp: fix MD5 (RFC2385) support
2010-05-16Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds4-7/+21
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Oprofile: Fix Loongson irq handler MIPS: N32: Use compat version for sys_ppoll. MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1
2010-05-16rtnetlink: make SR-IOV VF interface symmetricChris Wright2-53/+129
Now we have a set of nested attributes: IFLA_VFINFO_LIST (NESTED) IFLA_VF_INFO (NESTED) IFLA_VF_MAC IFLA_VF_VLAN IFLA_VF_TX_RATE This allows a single set to operate on multiple attributes if desired. Among other things, it means a dump can be replayed to set state. The current interface has yet to be released, so this seems like something to consider for 2.6.34. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16sctp: delete active ICMP proto unreachable timer when free transportWei Yongjun1-0/+4
transport may be free before ICMP proto unreachable timer expire, so we should delete active ICMP proto unreachable timer when transport is going away. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16tcp: fix MD5 (RFC2385) supportEric Dumazet2-28/+27
TCP MD5 support uses percpu data for temporary storage. It currently disables preemption so that same storage cannot be reclaimed by another thread on same cpu. We also have to make sure a softirq handler wont try to use also same context. Various bug reports demonstrated corruptions. Fix is to disable preemption and BH. Reported-by: Bhaskar Dutta <bhaskie@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-15 MIPS: Oprofile: Fix Loongson irq handlerWu Zhangjin1-1/+1
The interrupt enable bit for the performance counters is in the Control Register $24, not in the counter register. loongson2_perfcount_handler(), we need to use Reported-by: Xu Hengyang <hengyang@mail.ustc.edu.cn> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1198/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-05-15 MIPS: N32: Use compat version for sys_ppoll.Chandrakala Chavva1-1/+1
The sys_ppoll() takes struct 'struct timespec'. This is different for the N32 and N64 ABIs. Use the compat version to do the proper conversions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1210/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-05-15 MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1Shane McDonald2-5/+19
In the FPU emulator code of the MIPS, the Cause bits of the FCSR register are not currently writeable by the ctc1 instruction. In odd corner cases, this can cause problems. For example, a case existed where a divide-by-zero exception was generated by the FPU, and the signal handler attempted to restore the FPU registers to their state before the exception occurred. In this particular setup, writing the old value to the FCSR register would cause another divide-by-zero exception to occur immediately. The solution is to change the ctc1 instruction emulator code to allow the Cause bits of the FCSR register to be writeable. This is the behaviour of the hardware that the code is emulating. This problem was found by Shane McDonald, but the credit for the fix goes to Kevin Kissell. In Kevin's words: I submit that the bug is indeed in that ctc_op: case of the emulator. The Cause bits (17:12) are supposed to be writable by that instruction, but the CTC1 emulation won't let them be updated by the instruction. I think that actually if you just completely removed lines 387-388 [...] things would work a good deal better. At least, it would be a more accurate emulation of the architecturally defined FPU. If I wanted to be really, really pedantic (which I sometimes do), I'd also protect the reserved bits that aren't necessarily writable. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1205/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds1-0/+5
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check for read permission on src file in the clone ioctl
2010-05-15lib/btree: fix possible NULL pointer dereferencekirjanov@gmail.com1-1/+2
mempool_alloc() can return null in atomic case. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-15mmc: at91_mci: modify cache flush routinesNicolas Ferre1-1/+1
As we were using an internal dma flushing routine, this patch changes to the DMA API flush_kernel_dcache_page(). Driver is able to compile now. [akpm@linux-foundation.org: flush_kernel_dcache_page() comes before kunmap_atomic()] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-15Btrfs: check for read permission on src file in the clone ioctlDan Rosenberg1-0/+5
The existing code would have allowed you to clone a file that was only open for writing Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-15Merge branch 'for-linus' of ↵Linus Torvalds8-26/+49
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: JFS: Free sbi memory in error path fs/sysv: dereferencing ERR_PTR() Fix double-free in logfs Fix the regression created by "set S_DEAD on unlink()..." commit
2010-05-15Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf record: Add a fallback to the reference relocation symbol
2010-05-15JFS: Free sbi memory in error pathJan Blunck1-7/+6
I spotted the missing kfree() while removing the BKL. [akpm@linux-foundation.org: avoid multiple returns so it doesn't happen again] Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-15fs/sysv: dereferencing ERR_PTR()Dan Carpenter1-1/+1
I moved the dir_put_page() inside the if condition so we don't dereference "page", if it's an ERR_PTR(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-15Fix double-free in logfsAl Viro1-7/+7
iput() is needed *until* we'd done successful d_alloc_root() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-15Fix the regression created by "set S_DEAD on unlink()..." commitAl Viro5-11/+35
1) i_flags simply doesn't work for mount/unlink race prevention; we may have many links to file and rm on one of those obviously shouldn't prevent bind on top of another later on. To fix it right way we need to mark _dentry_ as unsuitable for mounting upon; new flag (DCACHE_CANT_MOUNT) is protected by d_flags and i_mutex on the inode in question. Set it (with dont_mount(dentry)) in unlink/rmdir/etc., check (with cant_mount(dentry)) in places in namespace.c that used to check for S_DEAD. Setting S_DEAD is still needed in places where we used to set it (for directories getting killed), since we rely on it for readdir/rmdir race prevention. 2) rename()/mount() protection has another bogosity - we unhash the target before we'd checked that it's not a mountpoint. Fixed. 3) ancient bogosity in pivot_root() - we locked i_mutex on the right directory, but checked S_DEAD on the different (and wrong) one. Noticed and fixed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-14Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds12-35/+99
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixes ARM: 6125/1: ARM TWD: move TWD registers to common header ARM: 6110/1: Fix Thumb-2 kernel builds when UACCESS_WITH_MEMCPY is enabled ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache ops ARM: 6106/1: Implement copy_to_user_page() for noMMU ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.c
2010-05-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mrst: Don't blindly access extended config space
2010-05-14profile: fix stats and data leakageHugh Dickins1-1/+3
If the kernel is large or the profiling step small, /proc/profile leaks data and readprofile shows silly stats, until readprofile -r has reset the buffer: clear the prof_buffer when it is vmalloc()ed. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 07:29:07 +0000