summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-07-25Input: wacom - support up to 2048 pressure levels with ISDv4Jason Gerecke1-1/+1
Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - move the USB (now hid) Wacom driver in drivers/hidBenjamin Tissoires8-19/+16
wacom.ko is now a full HID driver, we have to move it into the proper subdirectory: drivers/hid. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - keep wacom_ids orderedBenjamin Tissoires1-40/+39
No Functional changes, just some reordering. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - remove field pktlen declaration in the list of devicesBenjamin Tissoires2-269/+247
pktlen is now overwritten by the driver directly by reading the hid report descriptor. There is no need to declare it statically. We also move down the position of the field in the struct so that we can keep the current declaration of Wacom devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - use hidinput_calc_abs_res instead of duplicating its codeBenjamin Tissoires1-39/+9
This may infer a small difference with the previous implementation due to the DIV_ROUND_CLOSEST() in the hid implementation. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - use in-kernel HID parserBenjamin Tissoires2-238/+114
HID already parses the report descriptor, so use it instead of implementing our own. The special case for Bamboo PT 3rd gen is also removed and handled in the same way Intuos 5 is treated, by hardcoding it in the driver. Last, the unit_exponent stored into the hid field already is signed, so there is no need to handle a two's complement anymore. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - use hid_info instead of plain dev_infoBenjamin Tissoires1-5/+3
Removes one more need of usb and intf. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - register power device at the HID levelBenjamin Tissoires1-2/+2
Use the HID device as the parent for the power device when dealing with a wireless receiver. Removes one more usb dependency and does not break user space. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - remove usb dependency for siblings devicesBenjamin Tissoires1-39/+37
Wacom tablets can share different physical sensors on one physical device. These are called siblings in the code. The current way of implementation relies on the USB topology to be able to share data amongs those sensors. We can replace the code to match a HID subsystem, without involving the USB topology: - the first probed sensor does not find any siblings in the list wacom_udev_list, so it creates its own wacom_hdev_data with its own struct hid_device - the other sensor checks the current list of siblings in wacom_hdev_data, and if there is a match, it associates itself to the matched device. To be sure that we are not associating different sensors from different physical devices, we also check for the phys path of the hid device which contains the USB topology. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - register the input devices on top of the HID oneBenjamin Tissoires2-8/+8
Matches the current behavior of the HID subsystem and removes one more dependency over USB. The current user space clients which relies on this to fetch the LEDs path need an update. However, we already break them in the kernel v3.11 for the Bluetooth Wacom devices. They are going to be fixed soon. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - install LED/OLED sysfs files in the HID device instead of USBBenjamin Tissoires1-11/+11
Removes one more dependency over USB, but requires some changes in the user space to find the sysfs files correctly. This patch breaks the user space. However, the number of program accessing the LEDs is quite limited and we can easily patch them to handle the new HID behavior. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - compute the HID report size to get the actual packet sizeBenjamin Tissoires1-32/+26
This removes an USB dependency and is more accurate: the computed pktlen is the actual maximum size of the reports forwarded by the device. Given that the pktlen is correctly computed/validated, we can store it now in the features struct instead of having a special handling in the rest of the code. Likewise, this information is not mandatory anymore in the description of devices in wacom_wac.c. They will be removed in a separate patch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - use HID core to actually fetch the report descriptorBenjamin Tissoires1-60/+10
HID core already retrieves the report descritor. There is no need to ask ourself for one. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - use hid communication instead of plain usbBenjamin Tissoires1-45/+36
Wacom.ko was a plain USB driver for a HID device. The communications from/to the devices can actually be replaced with the HID API. At the USB level, the reports are exactly the same. This will allow to use uhid virtual devices instead of true USB devices. This step is necessary to implement regression tests. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - switch from an USB driver to a HID driverBenjamin Tissoires7-188/+141
All USB Wacom tablets are actually HID devices. For historical reasons, they are handled as plain USB devices. The current code makes more and more reference to the HID subsystem like implementing its own HID report descriptor parser to handle new devices. From the user point of view, we can transparently switch from this state to a driver handled in the HID subsystem and clean up a lot of USB specific code in the wacom.ko driver. The other benefit once the USB dependecies have been removed is that we can use a tool like uhid to make regression tests and allow further cleanup or new implementations without risking breaking current behaviors. To match the current handling of devices in wacom_wac.c, we rely on the hid_type set by usbhid. usbhid sets the hid_type to HID_TYPE_USBMOUSE when it sees a USB boot mouse protocol declared and HID_TYPE_USBNONE when the device is plain HID. There is thus a one to one matching between the list of supported devices before and after the switch from USB to HID. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - include and use linux/hid.hBenjamin Tissoires1-31/+22
The current wacom code redefines constants that are already in linux/hid.h This patch includes the official implementation and use it accross the code. There is a conflict with HID_USAGE and others at the same level: - in the wacom.ko implementation, those are the #define regarding the value of the field in the report descriptor - in the hid.h, those are bitmask So add HDESC_ in their current definition. Also, the struct hid_descriptor slightly differs from the linux/hid.h point of view, so mark it as custom for this driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - split out the pad device for the wireless receiverBenjamin Tissoires1-23/+23
The Wireless Receiver should also behave in the same way than regular USB devices. To simplify the unregistering of the different devices, wacom_unregister_inputs() is introduced. For consistency, the function wacom_register_input() is renamed into wacom_register_inputs(). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - split out the pad device for Graphire G4 and MOBenjamin Tissoires1-17/+27
MSC_SERIAL can be safely removed from pad devices. If it is not here, xf86-input-wacom correctly generates ones for its internal use. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - split out the pad device for DTUSBenjamin Tissoires1-12/+6
MSC_SERIAL can be safely removed from the pad device. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - split out the pad device for BamboosBenjamin Tissoires1-16/+23
We rely on the return code of wacom_bpt*() to do the input_sync(). wacom_wac_irq() then properly sync the input devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - split out the pad device for Intuos/CintiqBenjamin Tissoires1-86/+122
MSC_SERIAL can be safely dropped for pad input devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - create a separate input device for padsBenjamin Tissoires4-9/+85
Currently, the pad events are sent through the stylus input device for the Intuos/Cintiqs, and through the touch input device for the Bamboos. To differentiate the buttons pressed on the pad from the ones pressed on the stylus, the Intuos/Cintiq uses MISC_SERIAL and ABS_MISC. This lead to a multiplexing of the events into one device, which are then splitted out in xf86-input-wacom. Bamboos are not using MISC events because the pad is attached to the touch interface, and only BTN_TOUCH is used for the finger (and DOUBLE_TAP, etc...). However, the user space driver still splits out the pad from the touch interface in the same way it does for the pro line devices. The other problem we can see with this fact is that some of the Intuos and Cintiq have a wheel, and the effective range of the reported values is [0..71]. Unfortunately, the airbrush stylus also sends wheel events (there is a small wheel on it), but in the range [0..1023]. From the user space point of view it is kind of difficult to understand that because the wheel on the pad are quite common, while the airbrush tool is not. A solution to fix all of these problems is to split out the pad device from the stylus/touch. This decision makes more sense because the pad is not linked to the absolute position of the finger or pen, and usually, the events from the pad are filtered out by the compositor, which then convert them into actions or keyboard shortcuts. For backward compatibility with current xf86-input-wacom, the pad devices still present the ABS_X, ABS_Y and ABS_MISC events, but they can be completely ignored in the new implementation. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - assign phys field from struct wacom into input_devBenjamin Tissoires1-0/+1
This field was not used for 9 years, it is time to assign it. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: Revert "wacom - testing result shows get_report is unnecessary."Benjamin Tissoires1-0/+3
This reverts commit 1b2faaf7e219fc2905d75afcd4c815e5d39eda80. The Intuos4 series presents a bug in which it hangs if it receives a set feature command while switching to the enhanced mode. This bug is triggered when plugging an Intuos 4 while having a gnome user session up and running. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-20Linux 3.16-rc6Linus Torvalds1-1/+1
2014-07-20Merge tag 'staging-3.16-rc6' of ↵Linus Torvalds2-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull more IIO driver fixes from Greg KH: "Here are two IIO driver fixes for 3.16-rc6 that resolve some reported issues" * tag 'staging-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: mma8452: Use correct acceleration units. iio:core: Handle error when mask type is not separate
2014-07-20Merge tag 'usb-3.16-rc6' of ↵Linus Torvalds2-2/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are two USB patches that resolve some reported issues, one with an odd HUB, and one in the chipidea driver" * tag 'usb-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: Check if port status is equal to RxDetect usb: chipidea: udc: Disable auto ZLP generation on ep0
2014-07-20Merge tag 'driver-core-3.16-rc6' of ↵Linus Torvalds1-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core fix that reverts an older patch that has been causing a number of reported problems with the platform devices. This revert has been in linux-next for a while with no reported issues" * tag 'driver-core-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: platform_get_irq: Revert to platform_get_resource if of_irq_get fails
2014-07-20Merge tag 'char-misc-3.16-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here's a single hyper-v driver fix for a reported issue" * tag 'char-misc-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: hv_fcopy: fix a race condition for SMP guest
2014-07-20Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds4-6/+17
Pull intel drm fixes from Dave Airlie: "Intel fixes came in late, but since I debugged one of them I'll send them on, Two reverts, a quirk and one warn regression" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/i915: reverse dp link param selection, prefer fast over wide again" drm/i915: Track the primary plane correctly when reassigning planes drm/i915: Ignore VBT backlight presence check on HP Chromebook 14 Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"
2014-07-20Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds3-9/+11
Pull UML fixes from Richard Weinberger: "Four fixes, all discovered by Trinity" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: segv: Save regs only in case of a kernel mode fault um: Fix hung task in fix_range_common() um: Ensure that a stub page cannot get unmapped Revert "um: Fix wait_stub_done() error handling"
2014-07-20Merge branch 'for-linus' of ↵Linus Torvalds2-4/+15
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "We have two more fixes in my for-linus branch. I was hoping to also include a fix for a btrfs deadlock with compression enabled, but we're still nailing that one down" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: test for valid bdev before kobj removal in btrfs_rm_device Btrfs: fix abnormal long waiting in fsync
2014-07-20Merge tag 'nfs-for-3.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds6-62/+343
Pull NFS client fixes from Trond Myklebust: "Apologies for the relative lateness of this pull request, however the commits fix some issues with the NFS read/write code updates in 3.16-rc1 that can cause serious Oopsing when using small r/wsize. The delay was mainly due to extra testing to make sure that the fixes behave correctly. Highlights include; - Stable fix for an NFSv3 posix ACL regression - Multiple fixes for regressions to the NFS generic read/write code: - Fix page splitting bugs that come into play when a small rsize/wsize read/write needs to be sent again (due to error conditions or page redirty) - Fix nfs_wb_page_cancel, which is called by the "invalidatepage" method - Fix 2 compile warnings about unused variables - Fix a performance issue affecting unstable writes" * tag 'nfs-for-3.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Don't reset pg_moreio in __nfs_pageio_add_request NFS: Remove 2 unused variables nfs: handle multiple reqs in nfs_wb_page_cancel nfs: handle multiple reqs in nfs_page_async_flush nfs: change find_request to find_head_request nfs: nfs_page should take a ref on the head req nfs: mark nfs_page reqs with flag for extra ref nfs: only show Posix ACLs in listxattr if actually present
2014-07-20um: segv: Save regs only in case of a kernel mode faultRichard Weinberger1-1/+1
...otherwise me lose user mode regs and the resulting stack trace is useless. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-20um: Fix hung task in fix_range_common()Richard Weinberger1-1/+5
If do_ops() fails we have to release current->mm->mmap_sem otherwise the failing task will never terminate. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-20um: Ensure that a stub page cannot get unmappedRichard Weinberger1-0/+3
Trinity discovered an execution path such that a task can unmap his stub page. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-20Revert "um: Fix wait_stub_done() error handling"Richard Weinberger1-7/+2
This reverts commit 0974a9cadc7886f7baaa458bb0c89f5c5f9d458e. The real for for that issue is to release current->mm->mmap_sem in fix_range_common(). Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-19btrfs: test for valid bdev before kobj removal in btrfs_rm_deviceEric Sandeen1-4/+4
commit 99994cd btrfs: dev delete should remove sysfs entry added a btrfs_kobj_rm_device, which dereferences device->bdev... right after we check whether device->bdev might be NULL. I don't honestly know if it's possible to have a NULL device->bdev here, but assuming that it is (given the test), we need to move the kobject removal to be under that test. (Coverity spotted this) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-07-19Btrfs: fix abnormal long waiting in fsyncLiu Bo1-0/+11
xfstests generic/127 detected this problem. With commit 7fc34a62ca4434a79c68e23e70ed26111b7a4cf8, now fsync will only flush data within the passed range. This is the cause of the above problem, -- btrfs's fsync has a stage called 'sync log' which will wait for all the ordered extents it've recorded to finish. In xfstests/generic/127, with mixed operations such as truncate, fallocate, punch hole, and mapwrite, we get some pre-allocated extents, and mapwrite will mmap, and then msync. And I find that msync will wait for quite a long time (about 20s in my case), thanks to ftrace, it turns out that the previous fallocate calls 'btrfs_wait_ordered_range()' to flush dirty pages, but as the range of dirty pages may be larger than 'btrfs_wait_ordered_range()' wants, there can be some ordered extents created but not getting corresponding pages flushed, then they're left in memory until we fsync which runs into the stage 'sync log', and fsync will just wait for the system writeback thread to flush those pages and get ordered extents finished, so the latency is inevitable. This adds a flush similar to btrfs_start_ordered_extent() in btrfs_wait_logged_extents() to fix that. Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-07-19Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds19-86/+154
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "The locking department delivers: - A rather large and intrusive bundle of fixes to address serious performance regressions introduced by the new rwsem / mcs technology. Simpler solutions have been discussed, but they would have been ugly bandaids with more risk than doing the right thing. - Make the rwsem spin on owner technology opt-in for architectures and enable it only on the known to work ones. - A few fixes to the lockdep userspace library" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Add CONFIG_RWSEM_SPIN_ON_OWNER locking/mutex: Disable optimistic spinning on some architectures locking/rwsem: Reduce the size of struct rw_semaphore locking/rwsem: Rename 'activity' to 'count' locking/spinlocks/mcs: Micro-optimize osq_unlock() locking/spinlocks/mcs: Introduce and use init macro and function for osq locks locking/spinlocks/mcs: Convert osq lock to atomic_t to reduce overhead locking/spinlocks/mcs: Rename optimistic_spin_queue() to optimistic_spin_node() locking/rwsem: Allow conservative optimistic spinning when readers have lock tools/liblockdep: Account for bitfield changes in lockdeps lock_acquire tools/liblockdep: Remove debug print left over from development tools/liblockdep: Fix comparison of a boolean value with a value of 2
2014-07-19Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "Prevent a possible divide by zero in the debugging code" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix possible divide by zero in avg_atom() calculation
2014-07-19Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Three patches addressing shortcomings in the ARM gic interrupt chip driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: gic: Fix core ID calculation when topology is read from DT irqchip: gic: Add binding probe for ARM GIC400 irqchip: gic: Add support for cortex a7 compatible string
2014-07-19Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-2/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for a long standing issue in the alarm timer subsystem, which was noticed recently when people finally started to use alarm timers for serious work" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Fix bug where relative alarm timers were treated as absolute
2014-07-19Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds7-92/+137
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fixes from Thomas Gleixner: "Two RCU patches: - Address a serious performance regression on open/close caused by commit ac1bea85781e ("Make cond_resched() report RCU quiescent states") - Export RCU debug functions. Not a regression, but enablement to address a serious recursion bug in the sl*b allocators in 3.17" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Reduce overhead of cond_resched() checks for RCU rcu: Export debug_init_rcu_head() and and debug_init_rcu_head()
2014-07-18Merge tag 'fixes-for-linus' of ↵Linus Torvalds8-31/+48
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A smaller set of fixes this week, and all regression fixes: - a handful of issues fixed on at91 with common clock conversion - a set of fixes for Marvell mvebu (SMP, coherency, PM) - a clock fix for i.MX6Q. - ... and a SMP/hotplug fix for Exynos" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: Fix core ID used by platsmp and hotplug code ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock ARM: clk-imx6q: parent lvds_sel input from upstream clock gates ARM: mvebu: Fix coherency bus notifiers by using separate notifiers ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian
2014-07-19Merge tag 'drm-intel-fixes-2014-07-18' of ↵Dave Airlie4-6/+17
git://anongit.freedesktop.org/drm-intel But in any case nothing really shocking in here, 2 reverts, 1 quirk and a regression fix a WARN. * tag 'drm-intel-fixes-2014-07-18' of git://anongit.freedesktop.org/drm-intel: Revert "drm/i915: reverse dp link param selection, prefer fast over wide again" drm/i915: Track the primary plane correctly when reassigning planes drm/i915: Ignore VBT backlight presence check on HP Chromebook 14 Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"
2014-07-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds7-35/+69
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A couple of key fixes and a few less critical ones. The main ones are: - add a .bss section to the PE/COFF headers when building with EFI stub - invoke the correct paravirt magic when building the espfix page tables Unfortunately both of these areas also have at least one additional fix each still in thie pipeline, but which are not yet ready to push" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove unused variable "polling" x86/espfix/xen: Fix allocation of pages for paravirt page tables x86/efi: Include a .bss section within the PE/COFF headers efi: fdt: Do not report an error during boot if UEFI is not available efi/arm64: efistub: remove local copy of linux_banner
2014-07-18Merge tag 'rdma-for-linus' of ↵Linus Torvalds5-16/+39
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: - cxgb4 hardware driver regression fixes - mlx5 hardware driver regression fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx5: Enable "block multicast loopback" for kernel consumers RDMA/cxgb4: Call iwpm_init() only once mlx5_core: Fix possible race between mr tree insert/delete RDMA/cxgb4: Initialize the device status page RDMA/cxgb4: Clean up connection on ARP error RDMA/cxgb4: Fix skb_leak in reject_cr()
2014-07-18Merge tag 'hwmon-for-linus' of ↵Linus Torvalds3-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "More fallout from module tests and code inspection. Fixes to temperature limit write operations in adt7470 driver. Also, dashes are not allowed in hwmon 'name' attributes. Fix drivers where necessary" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adt7470) Fix writes to temperature limit registers hwmon: (da9055) Don't use dash in the name attribute hwmon: (da9052) Don't use dash in the name attribute
2014-07-18Merge tag 'iommu-fixes-v3.16-rc5' of ↵Linus Torvalds2-14/+12
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "A couple of fixes for the Freescale PAMU driver queued up: - fix PAMU window size check. - fix the device domain attach condition. - fix the error condition during iommu group" * tag 'iommu-fixes-v3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/fsl: Fix the error condition during iommu group iommu/fsl: Fix the device domain attach condition. iommu/fsl: Fix PAMU window size check.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 20:21:43 +0000