diff options
Diffstat (limited to 'lib')
| -rw-r--r-- | lib/Kconfig.debug | 27 | ||||
| -rw-r--r-- | lib/Kconfig.kgdb | 58 | ||||
| -rw-r--r-- | lib/Makefile | 1 | ||||
| -rw-r--r-- | lib/kernel_lock.c | 1 | ||||
| -rw-r--r-- | lib/scatterlist.c | 102 | ||||
| -rw-r--r-- | lib/semaphore-sleepers.c | 176 |
6 files changed, 176 insertions, 189 deletions
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 0796c1a090c0..95de3102bc87 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -211,7 +211,7 @@ config SLUB_DEBUG_ON config SLUB_STATS default n bool "Enable SLUB performance statistics" - depends on SLUB + depends on SLUB && SLUB_DEBUG && SYSFS help SLUB statistics are useful to debug SLUBs allocation behavior in order find ways to optimize the allocator. This should never be @@ -265,16 +265,6 @@ config DEBUG_MUTEXES This feature allows mutex semantics violations to be detected and reported. -config DEBUG_SEMAPHORE - bool "Semaphore debugging" - depends on DEBUG_KERNEL - depends on ALPHA || FRV - default n - help - If you say Y here then semaphore processing will issue lots of - verbose debugging messages. If you suspect a semaphore problem or a - kernel hacker asks for this option then say Y. Otherwise say N. - config DEBUG_LOCK_ALLOC bool "Lock debugging: detect incorrect freeing of live locks" depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT @@ -593,7 +583,7 @@ config LATENCYTOP to find out which userspace is blocking on what kernel operations. config PROVIDE_OHCI1394_DMA_INIT - bool "Provide code for enabling DMA over FireWire early on boot" + bool "Remote debugging over FireWire early on boot" depends on PCI && X86 help If you want to debug problems which hang or crash the kernel early @@ -621,4 +611,17 @@ config PROVIDE_OHCI1394_DMA_INIT See Documentation/debugging-via-ohci1394.txt for more information. +config FIREWIRE_OHCI_REMOTE_DMA + bool "Remote debugging over FireWire with firewire-ohci" + depends on FIREWIRE_OHCI + help + This option lets you use the FireWire bus for remote debugging + with help of the firewire-ohci driver. It enables unfiltered + remote DMA in firewire-ohci. + See Documentation/debugging-via-ohci1394.txt for more information. + + If unsure, say N. + source "samples/Kconfig" + +source "lib/Kconfig.kgdb" diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb new file mode 100644 index 000000000000..f2e01ac5ab09 --- /dev/null +++ b/lib/Kconfig.kgdb @@ -0,0 +1,58 @@ + +menuconfig KGDB + bool "KGDB: kernel debugging with remote gdb" + select FRAME_POINTER + depends on HAVE_ARCH_KGDB + depends on DEBUG_KERNEL && EXPERIMENTAL + help + If you say Y here, it will be possible to remotely debug the + kernel using gdb. Documentation of kernel debugger is available + at http://kgdb.sourceforge.net as well as in DocBook form + in Documentation/DocBook/. If unsure, say N. + +config HAVE_ARCH_KGDB_SHADOW_INFO + bool + +config HAVE_ARCH_KGDB + bool + +config KGDB_SERIAL_CONSOLE + tristate "KGDB: use kgdb over the serial console" + depends on KGDB + select CONSOLE_POLL + select MAGIC_SYSRQ + default y + help + Share a serial console with kgdb. Sysrq-g must be used + to break in initially. + +config KGDB_TESTS + bool "KGDB: internal test suite" + depends on KGDB + default n + help + This is a kgdb I/O module specifically designed to test + kgdb's internal functions. This kgdb I/O module is + intended to for the development of new kgdb stubs + as well as regression testing the kgdb internals. + See the drivers/misc/kgdbts.c for the details about + the tests. The most basic of this I/O module is to boot + a kernel boot arguments "kgdbwait kgdbts=V1F100" + +config KGDB_TESTS_ON_BOOT + bool "KGDB: Run tests on boot" + depends on KGDB_TESTS + default n + help + Run the kgdb tests on boot up automatically without the need + to pass in a kernel parameter + +config KGDB_TESTS_BOOT_STRING + string "KGDB: which internal kgdb tests to run" + depends on KGDB_TESTS_ON_BOOT + default "V1F100" + help + This is the command string to send the kgdb test suite on + boot. See the drivers/misc/kgdbts.c for detailed + information about other strings you could use beyond the + default of V1F100. diff --git a/lib/Makefile b/lib/Makefile index 4d059d469554..4d7649c326f6 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock_debug.o lib-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o -lib-$(CONFIG_SEMAPHORE_SLEEPERS) += semaphore-sleepers.o lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o diff --git a/lib/kernel_lock.c b/lib/kernel_lock.c index 812dbf00844b..fbc11a336bc5 100644 --- a/lib/kernel_lock.c +++ b/lib/kernel_lock.c @@ -8,6 +8,7 @@ #include <linux/smp_lock.h> #include <linux/module.h> #include <linux/kallsyms.h> +#include <asm/semaphore.h> /* * The 'big kernel semaphore' diff --git a/lib/scatterlist.c b/lib/scatterlist.c index acca4901046c..b80c21100d78 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -8,6 +8,7 @@ */ #include <linux/module.h> #include <linux/scatterlist.h> +#include <linux/highmem.h> /** * sg_next - return the next scatterlist entry in a list @@ -292,3 +293,104 @@ int sg_alloc_table(struct sg_table *table, unsigned int nents, gfp_t gfp_mask) return ret; } EXPORT_SYMBOL(sg_alloc_table); + +/** + * sg_copy_buffer - Copy data between a linear buffer and an SG list + * @sgl: The SG list + * @nents: Number of SG entries + * @buf: Where to copy from + * @buflen: The number of bytes to copy + * @to_buffer: transfer direction (non zero == from an sg list to a + * buffer, 0 == from a buffer to an sg list + * + * Returns the number of copied bytes. + * + **/ +static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, + void *buf, size_t buflen, int to_buffer) +{ + struct scatterlist *sg; + size_t buf_off = 0; + int i; + + WARN_ON(!irqs_disabled()); + + for_each_sg(sgl, sg, nents, i) { + struct page *page; + int n = 0; + unsigned int sg_off = sg->offset; + unsigned int sg_copy = sg->length; + + if (sg_copy > buflen) + sg_copy = buflen; + buflen -= sg_copy; + + while (sg_copy > 0) { + unsigned int page_copy; + void *p; + + page_copy = PAGE_SIZE - sg_off; + if (page_copy > sg_copy) + page_copy = sg_copy; + + page = nth_page(sg_page(sg), n); + p = kmap_atomic(page, KM_BIO_SRC_IRQ); + + if (to_buffer) + memcpy(buf + buf_off, p + sg_off, page_copy); + else { + memcpy(p + sg_off, buf + buf_off, page_copy); + flush_kernel_dcache_page(page); + } + + kunmap_atomic(p, KM_BIO_SRC_IRQ); + + buf_off += page_copy; + sg_off += page_copy; + if (sg_off == PAGE_SIZE) { + sg_off = 0; + n++; + } + sg_copy -= page_copy; + } + + if (!buflen) + break; + } + + return buf_off; +} + +/** + * sg_copy_from_buffer - Copy from a linear buffer to an SG list + * @sgl: The SG list + * @nents: Number of SG entries + * @buf: Where to copy from + * @buflen: The number of bytes to copy + * + * Returns the number of copied bytes. + * + **/ +size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents, + void *buf, size_t buflen) +{ + return sg_copy_buffer(sgl, nents, buf, buflen, 0); +} +EXPORT_SYMBOL(sg_copy_from_buffer); + +/** + * sg_copy_to_buffer - Copy from an SG list to a linear buffer + * @sgl: The SG list + * @nents: Number of SG entries + * @buf: Where to copy to + * @buflen: The number of bytes to copy + * + * Returns the number of copied bytes. + * + **/ +size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents, + void *buf, size_t buflen) +{ + return sg_copy_buffer(sgl, nents, buf, buflen, 1); +} +EXPORT_SYMBOL(sg_copy_to_buffer); diff --git a/lib/semaphore-sleepers.c b/lib/semaphore-sleepers.c deleted file mode 100644 index 0198782cdacb..000000000000 --- a/lib/semaphore-sleepers.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * i386 and x86-64 semaphore implementation. - * - * (C) Copyright 1999 Linus Torvalds - * - * Portions Copyright 1999 Red Hat, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org> - */ -#include <linux/sched.h> -#include <linux/err.h> -#include <linux/init.h> -#include <asm/semaphore.h> - -/* - * Semaphores are implemented using a two-way counter: - * The "count" variable is decremented for each process - * that tries to acquire the semaphore, while the "sleeping" - * variable is a count of such acquires. - * - * Notably, the inline "up()" and "down()" functions can - * efficiently test if they need to do any extra work (up - * needs to do something only if count was negative before - * the increment operation. - * - * "sleeping" and the contention routine ordering is protected - * by the spinlock in the semaphore's waitqueue head. - * - * Note that these functions are only called when there is - * contention on the lock, and as such all this is the - * "non-critical" part of the whole semaphore business. The - * critical part is the inline stuff in <asm/semaphore.h> - * where we want to avoid any extra jumps and calls. - */ - -/* - * Logic: - * - only on a boundary condition do we need to care. When we go - * from a negative count to a non-negative, we wake people up. - * - when we go from a non-negative count to a negative do we - * (a) synchronize with the "sleeper" count and (b) make sure - * that we're on the wakeup list before we synchronize so that - * we cannot lose wakeup events. - */ - -void __up(struct semaphore *sem) -{ - wake_up(&sem->wait); -} - -void __sched __down(struct semaphore *sem) -{ - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - unsigned long flags; - - tsk->state = TASK_UNINTERRUPTIBLE; - spin_lock_irqsave(&sem->wait.lock, flags); - add_wait_queue_exclusive_locked(&sem->wait, &wait); - - sem->sleepers++; - for (;;) { - int sleepers = sem->sleepers; - - /* - * Add "everybody else" into it. They aren't - * playing, because we own the spinlock in - * the wait_queue_head. - */ - if (!atomic_add_negative(sleepers - 1, &sem->count)) { - sem->sleepers = 0; - break; - } - sem->sleepers = 1; /* us - see -1 above */ - spin_unlock_irqrestore(&sem->wait.lock, flags); - - schedule(); - - spin_lock_irqsave(&sem->wait.lock, flags); - tsk->state = TASK_UNINTERRUPTIBLE; - } - remove_wait_queue_locked(&sem->wait, &wait); - wake_up_locked(&sem->wait); - spin_unlock_irqrestore(&sem->wait.lock, flags); - tsk->state = TASK_RUNNING; -} - -int __sched __down_interruptible(struct semaphore *sem) -{ - int retval = 0; - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - unsigned long flags; - - tsk->state = TASK_INTERRUPTIBLE; - spin_lock_irqsave(&sem->wait.lock, flags); - add_wait_queue_exclusive_locked(&sem->wait, &wait); - - sem->sleepers++; - for (;;) { - int sleepers = sem->sleepers; - - /* - * With signals pending, this turns into - * the trylock failure case - we won't be - * sleeping, and we* can't get the lock as - * it has contention. Just correct the count - * and exit. - */ - if (signal_pending(current)) { - retval = -EINTR; - sem->sleepers = 0; - atomic_add(sleepers, &sem->count); - break; - } - - /* - * Add "everybody else" into it. They aren't - * playing, because we own the spinlock in - * wait_queue_head. The "-1" is because we're - * still hoping to get the semaphore. - */ - if (!atomic_add_negative(sleepers - 1, &sem->count)) { - sem->sleepers = 0; - break; - } - sem->sleepers = 1; /* us - see -1 above */ - spin_unlock_irqrestore(&sem->wait.lock, flags); - - schedule(); - - spin_lock_irqsave(&sem->wait.lock, flags); - tsk->state = TASK_INTERRUPTIBLE; - } - remove_wait_queue_locked(&sem->wait, &wait); - wake_up_locked(&sem->wait); - spin_unlock_irqrestore(&sem->wait.lock, flags); - - tsk->state = TASK_RUNNING; - return retval; -} - -/* - * Trylock failed - make sure we correct for - * having decremented the count. - * - * We could have done the trylock with a - * single "cmpxchg" without failure cases, - * but then it wouldn't work on a 386. - */ -int __down_trylock(struct semaphore *sem) -{ - int sleepers; - unsigned long flags; - - spin_lock_irqsave(&sem->wait.lock, flags); - sleepers = sem->sleepers + 1; - sem->sleepers = 0; - - /* - * Add "everybody else" and us into it. They aren't - * playing, because we own the spinlock in the - * wait_queue_head. - */ - if (!atomic_add_negative(sleepers, &sem->count)) { - wake_up_locked(&sem->wait); - } - - spin_unlock_irqrestore(&sem->wait.lock, flags); - return 1; -} |