diff options
Diffstat (limited to 'include/uapi')
-rw-r--r-- | include/uapi/drm/drm_fourcc.h | 2 | ||||
-rw-r--r-- | include/uapi/linux/Kbuild | 1 | ||||
-rw-r--r-- | include/uapi/linux/dvb/video.h | 1 | ||||
-rw-r--r-- | include/uapi/linux/lirc.h | 168 | ||||
-rw-r--r-- | include/uapi/linux/openvswitch.h | 2 | ||||
-rw-r--r-- | include/uapi/linux/perf_event.h | 6 | ||||
-rw-r--r-- | include/uapi/linux/usb/video.h | 1 | ||||
-rw-r--r-- | include/uapi/linux/v4l2-controls.h | 6 | ||||
-rw-r--r-- | include/uapi/linux/videodev2.h | 14 | ||||
-rw-r--r-- | include/uapi/xen/gntdev.h | 50 |
10 files changed, 244 insertions, 7 deletions
diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h index 0b69a7753558..ee2d542c65f5 100644 --- a/include/uapi/drm/drm_fourcc.h +++ b/include/uapi/drm/drm_fourcc.h @@ -225,7 +225,7 @@ * - multiple of 128 pixels for the width * - multiple of 32 pixels for the height * - * For more information: see http://linuxtv.org/downloads/v4l-dvb-apis/re32.html + * For more information: see https://linuxtv.org/downloads/v4l-dvb-apis/re32.html */ #define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE fourcc_mod_code(SAMSUNG, 1) diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 628e6e64c2fb..c2e5d6cb34e3 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -186,6 +186,7 @@ header-y += if_tunnel.h header-y += if_vlan.h header-y += if_x25.h header-y += igmp.h +header-y += ila.h header-y += in6.h header-y += inet_diag.h header-y += in.h diff --git a/include/uapi/linux/dvb/video.h b/include/uapi/linux/dvb/video.h index d3d14a59d2d5..49392564f9d6 100644 --- a/include/uapi/linux/dvb/video.h +++ b/include/uapi/linux/dvb/video.h @@ -26,7 +26,6 @@ #include <linux/types.h> #ifndef __KERNEL__ -#include <stdint.h> #include <time.h> #endif diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h new file mode 100644 index 000000000000..4b3ab2966b5a --- /dev/null +++ b/include/uapi/linux/lirc.h @@ -0,0 +1,168 @@ +/* + * lirc.h - linux infrared remote control header file + * last modified 2010/07/13 by Jarod Wilson + */ + +#ifndef _LINUX_LIRC_H +#define _LINUX_LIRC_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define PULSE_BIT 0x01000000 +#define PULSE_MASK 0x00FFFFFF + +#define LIRC_MODE2_SPACE 0x00000000 +#define LIRC_MODE2_PULSE 0x01000000 +#define LIRC_MODE2_FREQUENCY 0x02000000 +#define LIRC_MODE2_TIMEOUT 0x03000000 + +#define LIRC_VALUE_MASK 0x00FFFFFF +#define LIRC_MODE2_MASK 0xFF000000 + +#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) +#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) +#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) +#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) + +#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) +#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) + +#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) +#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) +#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) +#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) + +/* used heavily by lirc userspace */ +#define lirc_t int + +/*** lirc compatible hardware features ***/ + +#define LIRC_MODE2SEND(x) (x) +#define LIRC_SEND2MODE(x) (x) +#define LIRC_MODE2REC(x) ((x) << 16) +#define LIRC_REC2MODE(x) ((x) >> 16) + +#define LIRC_MODE_RAW 0x00000001 +#define LIRC_MODE_PULSE 0x00000002 +#define LIRC_MODE_MODE2 0x00000004 +#define LIRC_MODE_LIRCCODE 0x00000010 + + +#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) +#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) +#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) +#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_SEND_MASK 0x0000003f + +#define LIRC_CAN_SET_SEND_CARRIER 0x00000100 +#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 +#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 + +#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) +#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) +#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) +#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) + +#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) +#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) + +#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 +#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 +#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 +#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 +#define LIRC_CAN_SET_REC_FILTER 0x08000000 + +#define LIRC_CAN_MEASURE_CARRIER 0x02000000 +#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 + +#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) +#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) + +#define LIRC_CAN_NOTIFY_DECODE 0x01000000 + +/*** IOCTL commands for lirc driver ***/ + +#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) + +#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) +#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) +#define LIRC_GET_SEND_CARRIER _IOR('i', 0x00000003, __u32) +#define LIRC_GET_REC_CARRIER _IOR('i', 0x00000004, __u32) +#define LIRC_GET_SEND_DUTY_CYCLE _IOR('i', 0x00000005, __u32) +#define LIRC_GET_REC_DUTY_CYCLE _IOR('i', 0x00000006, __u32) +#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) + +#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) +#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) + +#define LIRC_GET_MIN_FILTER_PULSE _IOR('i', 0x0000000a, __u32) +#define LIRC_GET_MAX_FILTER_PULSE _IOR('i', 0x0000000b, __u32) +#define LIRC_GET_MIN_FILTER_SPACE _IOR('i', 0x0000000c, __u32) +#define LIRC_GET_MAX_FILTER_SPACE _IOR('i', 0x0000000d, __u32) + +/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ +#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) + +#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) +#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) +/* Note: these can reset the according pulse_width */ +#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) +#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) +#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) +#define LIRC_SET_REC_DUTY_CYCLE _IOW('i', 0x00000016, __u32) +#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) + +/* + * when a timeout != 0 is set the driver will send a + * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is + * never sent, timeout is disabled by default + */ +#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) + +/* 1 enables, 0 disables timeout reports in MODE2 */ +#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) + +/* + * pulses shorter than this are filtered out by hardware (software + * emulation in lirc_dev?) + */ +#define LIRC_SET_REC_FILTER_PULSE _IOW('i', 0x0000001a, __u32) +/* + * spaces shorter than this are filtered out by hardware (software + * emulation in lirc_dev?) + */ +#define LIRC_SET_REC_FILTER_SPACE _IOW('i', 0x0000001b, __u32) +/* + * if filter cannot be set independently for pulse/space, this should + * be used + */ +#define LIRC_SET_REC_FILTER _IOW('i', 0x0000001c, __u32) + +/* + * if enabled from the next key press on the driver will send + * LIRC_MODE2_FREQUENCY packets + */ +#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) + +/* + * to set a range use + * LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the + * lower bound first and later + * LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER with the upper bound + */ + +#define LIRC_SET_REC_DUTY_CYCLE_RANGE _IOW('i', 0x0000001e, __u32) +#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) + +#define LIRC_NOTIFY_DECODE _IO('i', 0x00000020) + +#define LIRC_SETUP_START _IO('i', 0x00000021) +#define LIRC_SETUP_END _IO('i', 0x00000022) + +#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) + +#endif diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index 28ccedd000f5..a27222d5b413 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -628,7 +628,7 @@ struct ovs_action_hash { * @OVS_CT_ATTR_MARK: u32 value followed by u32 mask. For each bit set in the * mask, the corresponding bit in the value is copied to the connection * tracking mark field in the connection. - * @OVS_CT_ATTR_LABEL: %OVS_CT_LABELS_LEN value followed by %OVS_CT_LABELS_LEN + * @OVS_CT_ATTR_LABELS: %OVS_CT_LABELS_LEN value followed by %OVS_CT_LABELS_LEN * mask. For each bit set in the mask, the corresponding bit in the value is * copied to the connection tracking label field in the connection. * @OVS_CT_ATTR_HELPER: variable length string defining conntrack ALG. diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index d801bb0d9f6d..1afe9623c1a7 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -171,6 +171,9 @@ enum perf_branch_sample_type_shift { PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT = 12, /* indirect jumps */ PERF_SAMPLE_BRANCH_CALL_SHIFT = 13, /* direct call */ + PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT = 14, /* no flags */ + PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT = 15, /* no cycles */ + PERF_SAMPLE_BRANCH_MAX_SHIFT /* non-ABI */ }; @@ -192,6 +195,9 @@ enum perf_branch_sample_type { PERF_SAMPLE_BRANCH_IND_JUMP = 1U << PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT, PERF_SAMPLE_BRANCH_CALL = 1U << PERF_SAMPLE_BRANCH_CALL_SHIFT, + PERF_SAMPLE_BRANCH_NO_FLAGS = 1U << PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT, + PERF_SAMPLE_BRANCH_NO_CYCLES = 1U << PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT, + PERF_SAMPLE_BRANCH_MAX = 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT, }; diff --git a/include/uapi/linux/usb/video.h b/include/uapi/linux/usb/video.h index 3b3b95e01f71..69ab695fad2e 100644 --- a/include/uapi/linux/usb/video.h +++ b/include/uapi/linux/usb/video.h @@ -28,6 +28,7 @@ /* A.3. Video Interface Protocol Codes */ #define UVC_PC_PROTOCOL_UNDEFINED 0x00 +#define UVC_PC_PROTOCOL_15 0x01 /* A.5. Video Class-Specific VC Interface Descriptor Subtypes */ #define UVC_VC_DESCRIPTOR_UNDEFINED 0x00 diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 1bdce501ad6b..2d225bcdb831 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -158,8 +158,10 @@ enum v4l2_colorfx { * We reserve 16 controls for this driver. */ #define V4L2_CID_USER_S2255_BASE (V4L2_CID_USER_BASE + 0x1030) -/* The base for the si476x driver controls. See include/media/si476x.h for the list - * of controls. Total of 16 controls is reserved for this driver */ +/* + * The base for the si476x driver controls. See include/media/drv-intf/si476x.h + * for the list of controls. Total of 16 controls is reserved for this driver + */ #define V4L2_CID_USER_SI476X_BASE (V4L2_CID_USER_BASE + 0x1040) /* The base for the TI VPE driver controls. Total of 16 controls is reserved for diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index a0e87d16b726..14cd5ebfee6d 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -46,7 +46,7 @@ * All kernel-specific stuff were moved to media/v4l2-dev.h, so * no #if __KERNEL tests are allowed here * - * See http://linuxtv.org for more info + * See https://linuxtv.org for more info * * Author: Bill Dirks <bill@thedirks.org> * Justin Schoeman @@ -1476,7 +1476,12 @@ struct v4l2_ext_control { } __attribute__ ((packed)); struct v4l2_ext_controls { - __u32 ctrl_class; + union { +#ifndef __KERNEL__ + __u32 ctrl_class; +#endif + __u32 which; + }; __u32 count; __u32 error_idx; __u32 reserved[2]; @@ -1484,9 +1489,14 @@ struct v4l2_ext_controls { }; #define V4L2_CTRL_ID_MASK (0x0fffffff) +#ifndef __KERNEL__ #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) +#endif +#define V4L2_CTRL_ID2WHICH(id) ((id) & 0x0fff0000UL) #define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000) #define V4L2_CTRL_MAX_DIMS (4) +#define V4L2_CTRL_WHICH_CUR_VAL 0 +#define V4L2_CTRL_WHICH_DEF_VAL 0x0f000000 enum v4l2_ctrl_type { V4L2_CTRL_TYPE_INTEGER = 1, diff --git a/include/uapi/xen/gntdev.h b/include/uapi/xen/gntdev.h index aa7610a9b867..d0661977667e 100644 --- a/include/uapi/xen/gntdev.h +++ b/include/uapi/xen/gntdev.h @@ -144,6 +144,56 @@ struct ioctl_gntdev_unmap_notify { __u32 event_channel_port; }; +struct gntdev_grant_copy_segment { + union { + void __user *virt; + struct { + grant_ref_t ref; + __u16 offset; + domid_t domid; + } foreign; + } source, dest; + __u16 len; + + __u16 flags; /* GNTCOPY_* */ + __s16 status; /* GNTST_* */ +}; + +/* + * Copy between grant references and local buffers. + * + * The copy is split into @count @segments, each of which can copy + * to/from one grant reference. + * + * Each segment is similar to struct gnttab_copy in the hypervisor ABI + * except the local buffer is specified using a virtual address + * (instead of a GFN and offset). + * + * The local buffer may cross a Xen page boundary -- the driver will + * split segments into multiple ops if required. + * + * Returns 0 if all segments have been processed and @status in each + * segment is valid. Note that one or more segments may have failed + * (status != GNTST_okay). + * + * If the driver had to split a segment into two or more ops, @status + * includes the status of the first failed op for that segment (or + * GNTST_okay if all ops were successful). + * + * If -1 is returned, the status of all segments is undefined. + * + * EINVAL: A segment has local buffers for both source and + * destination. + * EINVAL: A segment crosses the boundary of a foreign page. + * EFAULT: A segment's local buffer is not accessible. + */ +#define IOCTL_GNTDEV_GRANT_COPY \ + _IOC(_IOC_NONE, 'G', 8, sizeof(struct ioctl_gntdev_grant_copy)) +struct ioctl_gntdev_grant_copy { + unsigned int count; + struct gntdev_grant_copy_segment __user *segments; +}; + /* Clear (set to zero) the byte specified by index */ #define UNMAP_NOTIFY_CLEAR_BYTE 0x1 /* Send an interrupt on the indicated event channel */ |