diff options
Diffstat (limited to 'include/asm-xtensa/xtensa/config-linux_be')
| -rw-r--r-- | include/asm-xtensa/xtensa/config-linux_be/core.h | 1270 | ||||
| -rw-r--r-- | include/asm-xtensa/xtensa/config-linux_be/defs.h | 270 | ||||
| -rw-r--r-- | include/asm-xtensa/xtensa/config-linux_be/specreg.h | 99 | ||||
| -rw-r--r-- | include/asm-xtensa/xtensa/config-linux_be/system.h | 198 | ||||
| -rw-r--r-- | include/asm-xtensa/xtensa/config-linux_be/tie.h | 275 |
5 files changed, 2112 insertions, 0 deletions
diff --git a/include/asm-xtensa/xtensa/config-linux_be/core.h b/include/asm-xtensa/xtensa/config-linux_be/core.h new file mode 100644 index 000000000000..d54fe5eb1064 --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/core.h @@ -0,0 +1,1270 @@ +/* + * xtensa/config/core.h -- HAL definitions that are dependent on CORE configuration + * + * This header file is sometimes referred to as the "compile-time HAL" or CHAL. + * It was generated for a specific Xtensa processor configuration. + * + * Source for configuration-independent binaries (which link in a + * configuration-specific HAL library) must NEVER include this file. + * It is perfectly normal, however, for the HAL source itself to include this file. + */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + + +#ifndef XTENSA_CONFIG_CORE_H +#define XTENSA_CONFIG_CORE_H + +#include <xtensa/hal.h> + + +/*---------------------------------------------------------------------- + GENERAL + ----------------------------------------------------------------------*/ + +/* + * Separators for macros that expand into arrays. + * These can be predefined by files that #include this one, + * when different separators are required. + */ +/* Element separator for macros that expand into 1-dimensional arrays: */ +#ifndef XCHAL_SEP +#define XCHAL_SEP , +#endif +/* Array separator for macros that expand into 2-dimensional arrays: */ +#ifndef XCHAL_SEP2 +#define XCHAL_SEP2 },{ +#endif + + +/*---------------------------------------------------------------------- + ENDIANNESS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 1 +#define XCHAL_HAVE_LE 0 +#define XCHAL_MEMORY_ORDER XTHAL_BIGENDIAN + + +/*---------------------------------------------------------------------- + REGISTER WINDOWS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_WINDOWED 1 /* 1 if windowed registers option configured, 0 otherwise */ +#define XCHAL_NUM_AREGS 64 /* number of physical address regs */ +#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ + + +/*---------------------------------------------------------------------- + ADDRESS ALIGNMENT + ----------------------------------------------------------------------*/ + +/* These apply to a selected set of core load and store instructions only (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* 1 if unaligned loads cause an exception, 0 otherwise */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* 1 if unaligned stores cause an exception, 0 otherwise */ + + +/*---------------------------------------------------------------------- + INTERRUPTS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* 1 if interrupt option configured, 0 otherwise */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* 1 if high-priority interrupt option configured, 0 otherwise */ +#define XCHAL_HAVE_HIGHLEVEL_INTERRUPTS XCHAL_HAVE_HIGHPRI_INTERRUPTS +#define XCHAL_HAVE_NMI 0 /* 1 if NMI option configured, 0 otherwise */ +#define XCHAL_NUM_INTERRUPTS 17 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* number of bits to hold an interrupt number: roundup(log2(number of interrupts)) */ +#define XCHAL_NUM_EXTINTERRUPTS 10 /* number of external interrupts */ +#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels (not including level zero!) */ +#define XCHAL_NUM_LOWPRI_LEVELS 1 /* number of low-priority interrupt levels (always 1) */ +#define XCHAL_FIRST_HIGHPRI_LEVEL (XCHAL_NUM_LOWPRI_LEVELS+1) /* level of first high-priority interrupt (always 2) */ +#define XCHAL_EXCM_LEVEL 1 /* level of interrupts masked by PS.EXCM (XEA2 only; always 1 in T10xx); + for XEA1, where there is no PS.EXCM, this is always 1; + interrupts at levels FIRST_HIGHPRI <= n <= EXCM_LEVEL, if any, + are termed "medium priority" interrupts (post T10xx only) */ +/* Note: 1 <= LOWPRI_LEVELS <= EXCM_LEVEL < DEBUGLEVEL <= NUM_INTLEVELS < NMILEVEL <= 15 */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL0_MASK 0x00000000 +#define XCHAL_INTLEVEL1_MASK 0x000064F9 +#define XCHAL_INTLEVEL2_MASK 0x00008902 +#define XCHAL_INTLEVEL3_MASK 0x00011204 +#define XCHAL_INTLEVEL4_MASK 0x00000000 +#define XCHAL_INTLEVEL5_MASK 0x00000000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00000000 +#define XCHAL_INTLEVEL8_MASK 0x00000000 +#define XCHAL_INTLEVEL9_MASK 0x00000000 +#define XCHAL_INTLEVEL10_MASK 0x00000000 +#define XCHAL_INTLEVEL11_MASK 0x00000000 +#define XCHAL_INTLEVEL12_MASK 0x00000000 +#define XCHAL_INTLEVEL13_MASK 0x00000000 +#define XCHAL_INTLEVEL14_MASK 0x00000000 +#define XCHAL_INTLEVEL15_MASK 0x00000000 +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_INTLEVEL_MASKS 0x00000000 XCHAL_SEP \ + 0x000064F9 XCHAL_SEP \ + 0x00008902 XCHAL_SEP \ + 0x00011204 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 XCHAL_SEP \ + 0x00000000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL0_ANDBELOW_MASK 0x00000000 +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000064F9 +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x0000EDFB +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL8_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL9_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL10_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL11_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL12_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL13_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL14_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL15_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_LOWPRI_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK /* mask of all low-priority interrupts */ +#define XCHAL_EXCM_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK /* mask of all interrupts masked by PS.EXCM (or CEXCM) */ +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_INTLEVEL_ANDBELOW_MASKS 0x00000000 XCHAL_SEP \ + 0x000064F9 XCHAL_SEP \ + 0x0000EDFB XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF XCHAL_SEP \ + 0x0001FFFF + +/* Interrupt numbers for each interrupt level at which only one interrupt was configured: */ +/*#define XCHAL_INTLEVEL1_NUM ...more than one interrupt at this level...*/ +/*#define XCHAL_INTLEVEL2_NUM ...more than one interrupt at this level...*/ +/*#define XCHAL_INTLEVEL3_NUM ...more than one interrupt at this level...*/ + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 2 +#define XCHAL_INT2_LEVEL 3 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 1 +#define XCHAL_INT11_LEVEL 2 +#define XCHAL_INT12_LEVEL 3 +#define XCHAL_INT13_LEVEL 1 +#define XCHAL_INT14_LEVEL 1 +#define XCHAL_INT15_LEVEL 2 +#define XCHAL_INT16_LEVEL 3 +#define XCHAL_INT17_LEVEL 0 +#define XCHAL_INT18_LEVEL 0 +#define XCHAL_INT19_LEVEL 0 +#define XCHAL_INT20_LEVEL 0 +#define XCHAL_INT21_LEVEL 0 +#define XCHAL_INT22_LEVEL 0 +#define XCHAL_INT23_LEVEL 0 +#define XCHAL_INT24_LEVEL 0 +#define XCHAL_INT25_LEVEL 0 +#define XCHAL_INT26_LEVEL 0 +#define XCHAL_INT27_LEVEL 0 +#define XCHAL_INT28_LEVEL 0 +#define XCHAL_INT29_LEVEL 0 +#define XCHAL_INT30_LEVEL 0 +#define XCHAL_INT31_LEVEL 0 +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_INT_LEVELS 1 XCHAL_SEP \ + 2 XCHAL_SEP \ + 3 XCHAL_SEP \ + 1 XCHAL_SEP \ + 1 XCHAL_SEP \ + 1 XCHAL_SEP \ + 1 XCHAL_SEP \ + 1 XCHAL_SEP \ + 2 XCHAL_SEP \ + 3 XCHAL_SEP \ + 1 XCHAL_SEP \ + 2 XCHAL_SEP \ + 3 XCHAL_SEP \ + 1 XCHAL_SEP \ + 1 XCHAL_SEP \ + 2 XCHAL_SEP \ + 3 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 XCHAL_SEP \ + 0 + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT17_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT18_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT19_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT20_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT21_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT22_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT23_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT24_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT25_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT26_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT27_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT28_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT29_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT30_TYPE XTHAL_INTTYPE_UNCONFIGURED +#define XCHAL_INT31_TYPE XTHAL_INTTYPE_UNCONFIGURED +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_INT_TYPES XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ + XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ + XTHAL_INTTYPE_TIMER XCHAL_SEP \ + XTHAL_INTTYPE_TIMER XCHAL_SEP \ + XTHAL_INTTYPE_TIMER XCHAL_SEP \ + XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ + XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ + XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ + XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ + XTHAL_INTTYPE_UNCONFIGURED + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFE0000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x0001E000 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000380 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000007F +#define XCHAL_INTTYPE_MASK_TIMER 0x00001C00 +#define XCHAL_INTTYPE_MASK_NMI 0x00000000 +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_INTTYPE_MASKS 0xFFFE0000 XCHAL_SEP \ + 0x0001E000 XCHAL_SEP \ + 0x00000380 XCHAL_SEP \ + 0x0000007F XCHAL_SEP \ + 0x00001C00 XCHAL_SEP \ + 0x00000000 + +/* Interrupts assigned to each timer (CCOMPARE0 to CCOMPARE3), -1 if unassigned */ +#define XCHAL_TIMER0_INTERRUPT 10 +#define XCHAL_TIMER1_INTERRUPT 11 +#define XCHAL_TIMER2_INTERRUPT 12 +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +/* As an array of entries (eg. for C constant arrays): */ +#define XCHAL_TIMER_INTERRUPTS 10 XCHAL_SEP \ + 11 XCHAL_SEP \ + 12 XCHAL_SEP \ + XTHAL_TIMER_UNCONFIGURED + +/* Indexing macros: */ +#define _XCHAL_INTLEVEL_MASK(n) XCHAL_INTLEVEL ## n ## _MASK +#define XCHAL_INTLEVEL_MASK(n) _XCHAL_INTLEVEL_MASK(n) /* n = 0 .. 15 */ +#define _XCHAL_INTLEVEL_ANDBELOWMASK(n) XCHAL_INTLEVEL ## n ## _ANDBELOW_MASK +#define XCHAL_INTLEVEL_ANDBELOW_MASK(n) _XCHAL_INTLEVEL_ANDBELOWMASK(n) /* n = 0 .. 15 */ +#define _XCHAL_INT_LEVEL(n) XCHAL_INT ## n ## _LEVEL +#define XCHAL_INT_LEVEL(n) _XCHAL_INT_LEVEL(n) /* n = 0 .. 31 */ +#define _XCHAL_INT_TYPE(n) XCHAL_INT ## n ## _TYPE +#define XCHAL_INT_TYPE(n) _XCHAL_INT_TYPE(n) /* n = 0 .. 31 */ +#define _XCHAL_TIMER_INTERRUPT(n) XCHAL_TIMER ## n ## _INTERRUPT +#define XCHAL_TIMER_INTERRUPT(n) _XCHAL_TIMER_INTERRUPT(n) /* n = 0 .. 3 */ + + + +/* + * External interrupt vectors/levels. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt<n> pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 2) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 3) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */ +#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */ +#define XCHAL_EXTINT8_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT9_NUM 9 /* (intlevel 3) */ + +/* Corresponding interrupt masks: */ +#define XCHAL_EXTINT0_MASK 0x00000001 +#define XCHAL_EXTINT1_MASK 0x00000002 +#define XCHAL_EXTINT2_MASK 0x00000004 +#define XCHAL_EXTINT3_MASK 0x00000008 +#define XCHAL_EXTINT4_MASK 0x00000010 +#define XCHAL_EXTINT5_MASK 0x00000020 +#define XCHAL_EXTINT6_MASK 0x00000040 +#define XCHAL_EXTINT7_MASK 0x00000080 +#define XCHAL_EXTINT8_MASK 0x00000100 +#define XCHAL_EXTINT9_MASK 0x00000200 + +/* Core config interrupt levels mapped to each external interrupt: */ +#define XCHAL_EXTINT0_LEVEL 1 /* (int number 0) */ +#define XCHAL_EXTINT1_LEVEL 2 /* (int number 1) */ +#define XCHAL_EXTINT2_LEVEL 3 /* (int number 2) */ +#define XCHAL_EXTINT3_LEVEL 1 /* (int number 3) */ +#define XCHAL_EXTINT4_LEVEL 1 /* (int number 4) */ +#define XCHAL_EXTINT5_LEVEL 1 /* (int number 5) */ +#define XCHAL_EXTINT6_LEVEL 1 /* (int number 6) */ +#define XCHAL_EXTINT7_LEVEL 1 /* (int number 7) */ +#define XCHAL_EXTINT8_LEVEL 2 /* (int number 8) */ +#define XCHAL_EXTINT9_LEVEL 3 /* (int number 9) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_EXCEPTIONS 1 /* 1 if exception option configured, 0 otherwise */ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture number: 1 for XEA1 (old), 2 for XEA2 (new) */ +#define XCHAL_HAVE_XEA1 0 /* 1 if XEA1, 0 otherwise */ +#define XCHAL_HAVE_XEA2 1 /* 1 if XEA2, 0 otherwise */ +/* For backward compatibility ONLY -- DO NOT USE (will be removed in future release): */ +#define XCHAL_HAVE_OLD_EXC_ARCH XCHAL_HAVE_XEA1 /* (DEPRECATED) 1 if old exception architecture (XEA1), 0 otherwise (eg. XEA2) */ +#define XCHAL_HAVE_EXCM XCHAL_HAVE_XEA2 /* (DEPRECATED) 1 if PS.EXCM bit exists (currently equals XCHAL_HAVE_TLBS) */ + +#define XCHAL_RESET_VECTOR_VADDR 0xFE000020 +#define XCHAL_RESET_VECTOR_PADDR 0xFE000020 +#define XCHAL_USER_VECTOR_VADDR 0xD0000220 +#define XCHAL_PROGRAMEXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR /* for backward compatibility */ +#define XCHAL_USEREXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR /* for backward compatibility */ +#define XCHAL_USER_VECTOR_PADDR 0x00000220 +#define XCHAL_PROGRAMEXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR /* for backward compatibility */ +#define XCHAL_USEREXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR /* for backward compatibility */ +#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000200 +#define XCHAL_STACKEDEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR /* for backward compatibility */ +#define XCHAL_KERNELEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR /* for backward compatibility */ +#define XCHAL_KERNEL_VECTOR_PADDR 0x00000200 +#define XCHAL_STACKEDEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR /* for backward compatibility */ +#define XCHAL_KERNELEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR /* for backward compatibility */ +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD0000290 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x00000290 +#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000240 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000240 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD0000250 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x00000250 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xFE000520 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xFE000520 +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR + +/* Indexing macros: */ +#define _XCHAL_INTLEVEL_VECTOR_VADDR(n) XCHAL_INTLEVEL ## n ## _VECTOR_VADDR +#define XCHAL_INTLEVEL_VECTOR_VADDR(n) _XCHAL_INTLEVEL_VECTOR_VADDR(n) /* n = 0 .. 15 */ + +/* + * General Exception Causes + * (values of EXCCAUSE special register set by general exceptions, + * which vector to the user, kernel, or double-exception vectors): + */ +#define XCHAL_EXCCAUSE_ILLEGAL_INSTRUCTION 0 /* Illegal Instruction (IllegalInstruction) */ +#define XCHAL_EXCCAUSE_SYSTEM_CALL 1 /* System Call (SystemCall) */ +#define XCHAL_EXCCAUSE_INSTRUCTION_FETCH_ERROR 2 /* Instruction Fetch Error (InstructionFetchError) */ +#define XCHAL_EXCCAUSE_LOAD_STORE_ERROR 3 /* Load Store Error (LoadStoreError) */ +#define XCHAL_EXCCAUSE_LEVEL1_INTERRUPT 4 /* Level 1 Interrupt (Level1Interrupt) */ +#define XCHAL_EXCCAUSE_ALLOCA 5 /* Stack Extension Assist (Alloca) */ +#define XCHAL_EXCCAUSE_INTEGER_DIVIDE_BY_ZERO 6 /* Integer Divide by Zero (IntegerDivideByZero) */ +#define XCHAL_EXCCAUSE_SPECULATION 7 /* Speculation (Speculation) */ +#define XCHAL_EXCCAUSE_PRIVILEGED 8 /* Privileged Instruction (Privileged) */ +#define XCHAL_EXCCAUSE_UNALIGNED 9 /* Unaligned Load Store (Unaligned) */ +#define XCHAL_EXCCAUSE_ITLB_MISS 16 /* ITlb Miss Exception (ITlbMiss) */ +#define XCHAL_EXCCAUSE_ITLB_MULTIHIT 17 /* ITlb Mutltihit Exception (ITlbMultihit) */ +#define XCHAL_EXCCAUSE_ITLB_PRIVILEGE 18 /* ITlb Privilege Exception (ITlbPrivilege) */ +#define XCHAL_EXCCAUSE_ITLB_SIZE_RESTRICTION 19 /* ITlb Size Restriction Exception (ITlbSizeRestriction) */ +#define XCHAL_EXCCAUSE_FETCH_CACHE_ATTRIBUTE 20 /* Fetch Cache Attribute Exception (FetchCacheAttribute) */ +#define XCHAL_EXCCAUSE_DTLB_MISS 24 /* DTlb Miss Exception (DTlbMiss) */ +#define XCHAL_EXCCAUSE_DTLB_MULTIHIT 25 /* DTlb Multihit Exception (DTlbMultihit) */ +#define XCHAL_EXCCAUSE_DTLB_PRIVILEGE 26 /* DTlb Privilege Exception (DTlbPrivilege) */ +#define XCHAL_EXCCAUSE_DTLB_SIZE_RESTRICTION 27 /* DTlb Size Restriction Exception (DTlbSizeRestriction) */ +#define XCHAL_EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28 /* Load Cache Attribute Exception (LoadCacheAttribute) */ +#define XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE 29 /* Store Cache Attribute Exception (StoreCacheAttribute) */ +#define XCHAL_EXCCAUSE_FLOATING_POINT 40 /* Floating Point Exception (FloatingPoint) */ + + + +/*---------------------------------------------------------------------- + TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_CCOUNT 1 /* 1 if have CCOUNT, 0 otherwise */ +/*#define XCHAL_HAVE_TIMERS XCHAL_HAVE_CCOUNT*/ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ + + + +/*---------------------------------------------------------------------- + DEBUG + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_DEBUG 1 /* 1 if debug option configured, 0 otherwise */ +#define XCHAL_HAVE_OCD 1 /* 1 if OnChipDebug option configured, 0 otherwise */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */ +/*DebugExternalInterrupt 0 0|1*/ +/*DebugUseDIRArray 0 0|1*/ + + + + +/*---------------------------------------------------------------------- + COPROCESSORS and EXTRA STATE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_CP 0 /* 1 if coprocessor option configured (CPENABLE present) */ +#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one (per cfg) */ + +#include <xtensa/config/tie.h> + + + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instruction ROMs configured */ +#define XCHAL_NUM_INSTRAM 0 /* number of core instruction RAMs configured */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs configured */ +#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs configured */ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports configured */ +#define XCHAL_NUM_IROM XCHAL_NUM_INSTROM /* (DEPRECATED) */ +#define XCHAL_NUM_IRAM XCHAL_NUM_INSTRAM /* (DEPRECATED) */ +#define XCHAL_NUM_DROM XCHAL_NUM_DATAROM /* (DEPRECATED) */ +#define XCHAL_NUM_DRAM XCHAL_NUM_DATARAM /* (DEPRECATED) */ + + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +/* Size of the cache lines in log2(bytes): */ +#define XCHAL_ICACHE_LINEWIDTH 4 +#define XCHAL_DCACHE_LINEWIDTH 4 +/* Size of the cache lines in bytes: */ +#define XCHAL_ICACHE_LINESIZE 16 +#define XCHAL_DCACHE_LINESIZE 16 +/* Max for both I-cache and D-cache (used for general alignment): */ +#define XCHAL_CACHE_LINEWIDTH_MAX 4 +#define XCHAL_CACHE_LINESIZE_MAX 16 + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 8 +#define XCHAL_DCACHE_SETWIDTH 8 +/* Max for both I-cache and D-cache (used for general cache-coherency page alignment): */ +#define XCHAL_CACHE_SETWIDTH_MAX 8 +#define XCHAL_CACHE_SETSIZE_MAX 256 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 2 +#define XCHAL_DCACHE_WAYS 2 + +/* Size of the caches in bytes (ways * 2^(linewidth + setwidth)): */ +#define XCHAL_ICACHE_SIZE 8192 +#define XCHAL_DCACHE_SIZE 8192 + +/* Cache features: */ +#define XCHAL_DCACHE_IS_WRITEBACK 0 +/* Whether cache locking feature is available: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 0 +#define XCHAL_DCACHE_LINE_LOCKABLE 0 + +/* Number of (encoded) cache attribute bits: */ +#define XCHAL_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */ +/* (The number of access mode bits (decoded cache attribute bits) is defined by the architecture; see xtensa/hal.h?) */ + + +/* Cache Attribute encodings -- lists of access modes for each cache attribute: */ +#define XCHAL_FCA_LIST XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_BYPASS XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_BYPASS XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_CACHED XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION XCHAL_SEP \ + XTHAL_FAM_EXCEPTION +#define XCHAL_LCA_LIST XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_BYPASSG XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_BYPASSG XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_CACHED XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_CACHED XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_NACACHED XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_NACACHED XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_ISOLATE XCHAL_SEP \ + XTHAL_LAM_EXCEPTION XCHAL_SEP \ + XTHAL_LAM_CACHED +#define XCHAL_SCA_LIST XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_BYPASS XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_WRITETHRU XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_WRITETHRU XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_ISOLATE XCHAL_SEP \ + XTHAL_SAM_EXCEPTION XCHAL_SEP \ + XTHAL_SAM_WRITETHRU + +/* Test: + read/only: 0 + 1 + 2 + 4 + 5 + 6 + 8 + 9 + 10 + 12 + 14 + read/only: 0 + 1 + 2 + 4 + 5 + 6 + 8 + 9 + 10 + 12 + 14 + all: 0 + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15 + fault: 0 + 2 + 4 + 6 + 8 + 10 + 12 + 14 + r/w/x cached: + r/w/x dcached: + I-bypass: 1 + 3 + + load guard bit set: 1 + 3 + load guard bit clr: 0 + 2 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15 + hit-cache r/w/x: 7 + 11 + + fams: 5 + fams: 0 / 6 / 18 / 1 / 2 + fams: Bypass / Isolate / Cached / Exception / NACached + + MMU okay: yes +*/ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* + * General notes on MMU parameters. + * + * Terminology: + * ASID = address-space ID (acts as an "extension" of virtual addresses) + * VPN = virtual page number + * PPN = physical page number + * CA = encoded cache attribute (access modes) + * TLB = translation look-aside buffer (term is stretched somewhat here) + * I = instruction (fetch accesses) + * D = data (load and store accesses) + * way = each TLB (ITLB and DTLB) consists of a number of "ways" + * that simultaneously match the virtual address of an access; + * a TLB successfully translates a virtual address if exactly + * one way matches the vaddr; if none match, it is a miss; + * if multiple match, one gets a "multihit" exception; + * each way can be independently configured in terms of number of + * entries, page sizes, which fields are writable or constant, etc. + * set = group of contiguous ways with exactly identical parameters + * ARF = auto-refill; hardware services a 1st-level miss by loading a PTE + * from the page table and storing it in one of the auto-refill ways; + * if this PTE load also misses, a miss exception is posted for s/w. + * min-wired = a "min-wired" way can be used to map a single (minimum-sized) + * page arbitrarily under program control; it has a single entry, + * is non-auto-refill (some other way(s) must be auto-refill), + * all its fields (VPN, PPN, ASID, CA) are all writable, and it + * supports the XCHAL_MMU_MIN_PTE_PAGE_SIZE page size (a current + * restriction is that this be the only page size it supports). + * + * TLB way entries are virtually indexed. + * TLB ways that support multiple page sizes: + * - must have all writable VPN and PPN fields; + * - can only use one page size at any given time (eg. setup at startup), + * selected by the respective ITLBCFG or DTLBCFG special register, + * whose bits n*4+3 .. n*4 index the list of page sizes for way n + * (XCHAL_xTLB_SETm_PAGESZ_LOG2_LIST for set m corresponding to way n); + * this list may be sparse for auto-refill ways because auto-refill + * ways have independent lists of supported page sizes sharing a + * common encoding with PTE entries; the encoding is the index into + * this list; unsupported sizes for a given way are zero in the list; + * selecting unsupported sizes results in undefined hardware behaviour; + * - is only possible for ways 0 thru 7 (due to ITLBCFG/DTLBCFG definition). + */ + +#define XCHAL_HAVE_CACHEATTR 0 /* 1 if CACHEATTR register present, 0 if TLBs present instead */ +#define XCHAL_HAVE_TLBS 1 /* 1 if TLBs present, 0 if CACHEATTR present instead */ +#define XCHAL_HAVE_MMU XCHAL_HAVE_TLBS /* (DEPRECATED; use XCHAL_HAVE_TLBS instead; will be removed in future release) */ +#define XCHAL_HAVE_SPANNING_WAY 0 /* 1 if single way maps entire virtual address space in I+D */ +#define XCHAL_HAVE_IDENTITY_MAP 0 /* 1 if virtual addr == physical addr always, 0 otherwise */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* 1 if have MMU that mimics a CACHEATTR config (CaMMU) */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* 1 if have MMU that mimics a CACHEATTR config, but with translation (CaXltMMU) */ + +#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs (address space IDs) */ +#define XCHAL_MMU_ASID_INVALID 0 /* ASID value indicating invalid address space */ +#define XCHAL_MMU_ASID_KERNEL 1 /* ASID value indicating kernel (ring 0) address space */ +#define XCHAL_MMU_RINGS 4 /* number of rings supported (1..4) */ +#define XCHAL_MMU_RING_BITS 2 /* number of bits needed to hold ring number */ +#define XCHAL_MMU_SR_BITS 0 /* number of size-restriction bits supported */ +#define XCHAL_MMU_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */ +#define XCHAL_MMU_MAX_PTE_PAGE_SIZE 12 /* max page size in a PTE structure (log2) */ +#define XCHAL_MMU_MIN_PTE_PAGE_SIZE 12 /* min page size in a PTE structure (log2) */ + + +/*** Instruction TLB: ***/ + +#define XCHAL_ITLB_WAY_BITS 3 /* number of bits holding the ways */ +#define XCHAL_ITLB_WAYS 7 /* number of ways (n-way set-associative TLB) */ +#define XCHAL_ITLB_ARF_WAYS 4 /* number of auto-refill ways */ +#define XCHAL_ITLB_SETS 4 /* number of sets (groups of ways with identical settings) */ + +/* Way set to which each way belongs: */ +#define XCHAL_ITLB_WAY0_SET 0 +#define XCHAL_ITLB_WAY1_SET 0 +#define XCHAL_ITLB_WAY2_SET 0 +#define XCHAL_ITLB_WAY3_SET 0 +#define XCHAL_ITLB_WAY4_SET 1 +#define XCHAL_ITLB_WAY5_SET 2 +#define XCHAL_ITLB_WAY6_SET 3 + +/* Ways sets that are used by hardware auto-refill (ARF): */ +#define XCHAL_ITLB_ARF_SETS 1 /* number of auto-refill sets */ +#define XCHAL_ITLB_ARF_SET0 0 /* index of n'th auto-refill set */ + +/* Way sets that are "min-wired" (see terminology comment above): */ +#define XCHAL_ITLB_MINWIRED_SETS 0 /* number of "min-wired" sets */ + + +/* ITLB way set 0 (group of ways 0 thru 3): */ +#define XCHAL_ITLB_SET0_WAY 0 /* index of first way in this way set */ +#define XCHAL_ITLB_SET0_WAYS 4 /* number of (contiguous) ways in this way set */ +#define XCHAL_ITLB_SET0_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ +#define XCHAL_ITLB_SET0_ENTRIES 4 /* number of entries in this way (always a power of 2) */ +#define XCHAL_ITLB_SET0_ARF 1 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_ITLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_ITLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ +#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ +#define XCHAL_ITLB_SET0_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_ITLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_ITLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET0_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ + +/* ITLB way set 1 (group of ways 4 thru 4): */ +#define XCHAL_ITLB_SET1_WAY 4 /* index of first way in this way set */ +#define XCHAL_ITLB_SET1_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_ITLB_SET1_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ +#define XCHAL_ITLB_SET1_ENTRIES 4 /* number of entries in this way (always a power of 2) */ +#define XCHAL_ITLB_SET1_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_ITLB_SET1_PAGESIZES 4 /* number of supported page sizes in this way */ +#define XCHAL_ITLB_SET1_PAGESZ_BITS 2 /* number of bits to encode the page size */ +#define XCHAL_ITLB_SET1_PAGESZ_LOG2_MIN 20 /* log2(minimum supported page size) */ +#define XCHAL_ITLB_SET1_PAGESZ_LOG2_MAX 26 /* log2(maximum supported page size) */ +#define XCHAL_ITLB_SET1_PAGESZ_LOG2_LIST 20 XCHAL_SEP 22 XCHAL_SEP 24 XCHAL_SEP 26 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_ITLB_SET1_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_ITLB_SET1_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET1_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET1_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_ITLB_SET1_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET1_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET1_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET1_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ + +/* ITLB way set 2 (group of ways 5 thru 5): */ +#define XCHAL_ITLB_SET2_WAY 5 /* index of first way in this way set */ +#define XCHAL_ITLB_SET2_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_ITLB_SET2_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ +#define XCHAL_ITLB_SET2_ENTRIES 2 /* number of entries in this way (always a power of 2) */ +#define XCHAL_ITLB_SET2_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_ITLB_SET2_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_ITLB_SET2_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_ITLB_SET2_PAGESZ_LOG2_MIN 27 /* log2(minimum supported page size) */ +#define XCHAL_ITLB_SET2_PAGESZ_LOG2_MAX 27 /* log2(maximum supported page size) */ +#define XCHAL_ITLB_SET2_PAGESZ_LOG2_LIST 27 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_ITLB_SET2_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ +#define XCHAL_ITLB_SET2_VPN_CONSTMASK 0xF0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET2_PPN_CONSTMASK 0xF8000000 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET2_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ +#define XCHAL_ITLB_SET2_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET2_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET2_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET2_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ +/* Constant ASID values for each entry of ITLB way set 2 (because ASID_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET2_E0_ASID_CONST 0x01 +#define XCHAL_ITLB_SET2_E1_ASID_CONST 0x01 +/* Constant VPN values for each entry of ITLB way set 2 (because VPN_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET2_E0_VPN_CONST 0xD0000000 +#define XCHAL_ITLB_SET2_E1_VPN_CONST 0xD8000000 +/* Constant PPN values for each entry of ITLB way set 2 (because PPN_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET2_E0_PPN_CONST 0x00000000 +#define XCHAL_ITLB_SET2_E1_PPN_CONST 0x00000000 +/* Constant CA values for each entry of ITLB way set 2 (because CA_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET2_E0_CA_CONST 0x07 +#define XCHAL_ITLB_SET2_E1_CA_CONST 0x03 + +/* ITLB way set 3 (group of ways 6 thru 6): */ +#define XCHAL_ITLB_SET3_WAY 6 /* index of first way in this way set */ +#define XCHAL_ITLB_SET3_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_ITLB_SET3_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ +#define XCHAL_ITLB_SET3_ENTRIES 2 /* number of entries in this way (always a power of 2) */ +#define XCHAL_ITLB_SET3_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_ITLB_SET3_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_ITLB_SET3_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_ITLB_SET3_PAGESZ_LOG2_MIN 28 /* log2(minimum supported page size) */ +#define XCHAL_ITLB_SET3_PAGESZ_LOG2_MAX 28 /* log2(maximum supported page size) */ +#define XCHAL_ITLB_SET3_PAGESZ_LOG2_LIST 28 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_ITLB_SET3_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ +#define XCHAL_ITLB_SET3_VPN_CONSTMASK 0xE0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET3_PPN_CONSTMASK 0xF0000000 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_ITLB_SET3_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ +#define XCHAL_ITLB_SET3_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET3_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET3_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_ITLB_SET3_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ +/* Constant ASID values for each entry of ITLB way set 3 (because ASID_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET3_E0_ASID_CONST 0x01 +#define XCHAL_ITLB_SET3_E1_ASID_CONST 0x01 +/* Constant VPN values for each entry of ITLB way set 3 (because VPN_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET3_E0_VPN_CONST 0xE0000000 +#define XCHAL_ITLB_SET3_E1_VPN_CONST 0xF0000000 +/* Constant PPN values for each entry of ITLB way set 3 (because PPN_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET3_E0_PPN_CONST 0xF0000000 +#define XCHAL_ITLB_SET3_E1_PPN_CONST 0xF0000000 +/* Constant CA values for each entry of ITLB way set 3 (because CA_CONSTMASK is non-zero): */ +#define XCHAL_ITLB_SET3_E0_CA_CONST 0x07 +#define XCHAL_ITLB_SET3_E1_CA_CONST 0x03 + +/* Indexing macros: */ +#define _XCHAL_ITLB_SET(n,_what) XCHAL_ITLB_SET ## n ## _what +#define XCHAL_ITLB_SET(n,what) _XCHAL_ITLB_SET(n, _ ## what ) +#define _XCHAL_ITLB_SET_E(n,i,_what) XCHAL_ITLB_SET ## n ## _E ## i ## _what +#define XCHAL_ITLB_SET_E(n,i,what) _XCHAL_ITLB_SET_E(n,i, _ ## what ) +/* + * Example use: XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,ENTRIES) + * to get the value of XCHAL_ITLB_SET<n>_ENTRIES where <n> is the first auto-refill set. + */ + + +/*** Data TLB: ***/ + +#define XCHAL_DTLB_WAY_BITS 4 /* number of bits holding the ways */ +#define XCHAL_DTLB_WAYS 10 /* number of ways (n-way set-associative TLB) */ +#define XCHAL_DTLB_ARF_WAYS 4 /* number of auto-refill ways */ +#define XCHAL_DTLB_SETS 5 /* number of sets (groups of ways with identical settings) */ + +/* Way set to which each way belongs: */ +#define XCHAL_DTLB_WAY0_SET 0 +#define XCHAL_DTLB_WAY1_SET 0 +#define XCHAL_DTLB_WAY2_SET 0 +#define XCHAL_DTLB_WAY3_SET 0 +#define XCHAL_DTLB_WAY4_SET 1 +#define XCHAL_DTLB_WAY5_SET 2 +#define XCHAL_DTLB_WAY6_SET 3 +#define XCHAL_DTLB_WAY7_SET 4 +#define XCHAL_DTLB_WAY8_SET 4 +#define XCHAL_DTLB_WAY9_SET 4 + +/* Ways sets that are used by hardware auto-refill (ARF): */ +#define XCHAL_DTLB_ARF_SETS 1 /* number of auto-refill sets */ +#define XCHAL_DTLB_ARF_SET0 0 /* index of n'th auto-refill set */ + +/* Way sets that are "min-wired" (see terminology comment above): */ +#define XCHAL_DTLB_MINWIRED_SETS 1 /* number of "min-wired" sets */ +#define XCHAL_DTLB_MINWIRED_SET0 4 /* index of n'th "min-wired" set */ + + +/* DTLB way set 0 (group of ways 0 thru 3): */ +#define XCHAL_DTLB_SET0_WAY 0 /* index of first way in this way set */ +#define XCHAL_DTLB_SET0_WAYS 4 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET0_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET0_ENTRIES 4 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET0_ARF 1 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET0_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET0_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ + +/* DTLB way set 1 (group of ways 4 thru 4): */ +#define XCHAL_DTLB_SET1_WAY 4 /* index of first way in this way set */ +#define XCHAL_DTLB_SET1_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET1_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET1_ENTRIES 4 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET1_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET1_PAGESIZES 4 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET1_PAGESZ_BITS 2 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET1_PAGESZ_LOG2_MIN 20 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET1_PAGESZ_LOG2_MAX 26 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET1_PAGESZ_LOG2_LIST 20 XCHAL_SEP 22 XCHAL_SEP 24 XCHAL_SEP 26 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET1_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET1_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET1_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET1_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET1_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET1_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET1_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET1_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ + +/* DTLB way set 2 (group of ways 5 thru 5): */ +#define XCHAL_DTLB_SET2_WAY 5 /* index of first way in this way set */ +#define XCHAL_DTLB_SET2_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET2_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET2_ENTRIES 2 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET2_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET2_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET2_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET2_PAGESZ_LOG2_MIN 27 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET2_PAGESZ_LOG2_MAX 27 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET2_PAGESZ_LOG2_LIST 27 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET2_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET2_VPN_CONSTMASK 0xF0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET2_PPN_CONSTMASK 0xF8000000 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET2_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET2_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET2_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET2_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET2_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ +/* Constant ASID values for each entry of DTLB way set 2 (because ASID_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET2_E0_ASID_CONST 0x01 +#define XCHAL_DTLB_SET2_E1_ASID_CONST 0x01 +/* Constant VPN values for each entry of DTLB way set 2 (because VPN_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET2_E0_VPN_CONST 0xD0000000 +#define XCHAL_DTLB_SET2_E1_VPN_CONST 0xD8000000 +/* Constant PPN values for each entry of DTLB way set 2 (because PPN_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET2_E0_PPN_CONST 0x00000000 +#define XCHAL_DTLB_SET2_E1_PPN_CONST 0x00000000 +/* Constant CA values for each entry of DTLB way set 2 (because CA_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET2_E0_CA_CONST 0x07 +#define XCHAL_DTLB_SET2_E1_CA_CONST 0x03 + +/* DTLB way set 3 (group of ways 6 thru 6): */ +#define XCHAL_DTLB_SET3_WAY 6 /* index of first way in this way set */ +#define XCHAL_DTLB_SET3_WAYS 1 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET3_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET3_ENTRIES 2 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET3_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET3_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET3_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET3_PAGESZ_LOG2_MIN 28 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET3_PAGESZ_LOG2_MAX 28 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET3_PAGESZ_LOG2_LIST 28 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET3_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET3_VPN_CONSTMASK 0xE0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET3_PPN_CONSTMASK 0xF0000000 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET3_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET3_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET3_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET3_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET3_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ +/* Constant ASID values for each entry of DTLB way set 3 (because ASID_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET3_E0_ASID_CONST 0x01 +#define XCHAL_DTLB_SET3_E1_ASID_CONST 0x01 +/* Constant VPN values for each entry of DTLB way set 3 (because VPN_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET3_E0_VPN_CONST 0xE0000000 +#define XCHAL_DTLB_SET3_E1_VPN_CONST 0xF0000000 +/* Constant PPN values for each entry of DTLB way set 3 (because PPN_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET3_E0_PPN_CONST 0xF0000000 +#define XCHAL_DTLB_SET3_E1_PPN_CONST 0xF0000000 +/* Constant CA values for each entry of DTLB way set 3 (because CA_CONSTMASK is non-zero): */ +#define XCHAL_DTLB_SET3_E0_CA_CONST 0x07 +#define XCHAL_DTLB_SET3_E1_CA_CONST 0x03 + +/* DTLB way set 4 (group of ways 7 thru 9): */ +#define XCHAL_DTLB_SET4_WAY 7 /* index of first way in this way set */ +#define XCHAL_DTLB_SET4_WAYS 3 /* number of (contiguous) ways in this way set */ +#define XCHAL_DTLB_SET4_ENTRIES_LOG2 0 /* log2(number of entries in this way) */ +#define XCHAL_DTLB_SET4_ENTRIES 1 /* number of entries in this way (always a power of 2) */ +#define XCHAL_DTLB_SET4_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ +#define XCHAL_DTLB_SET4_PAGESIZES 1 /* number of supported page sizes in this way */ +#define XCHAL_DTLB_SET4_PAGESZ_BITS 0 /* number of bits to encode the page size */ +#define XCHAL_DTLB_SET4_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ +#define XCHAL_DTLB_SET4_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ +#define XCHAL_DTLB_SET4_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; + 2^PAGESZ_BITS entries in list, unsupported entries are zero */ +#define XCHAL_DTLB_SET4_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ +#define XCHAL_DTLB_SET4_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET4_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ +#define XCHAL_DTLB_SET4_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ +#define XCHAL_DTLB_SET4_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET4_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET4_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ +#define XCHAL_DTLB_SET4_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ + +/* Indexing macros: */ +#define _XCHAL_DTLB_SET(n,_what) XCHAL_DTLB_SET ## n ## _what +#define XCHAL_DTLB_SET(n,what) _XCHAL_DTLB_SET(n, _ ## what ) +#define _XCHAL_DTLB_SET_E(n,i,_what) XCHAL_DTLB_SET ## n ## _E ## i ## _what +#define XCHAL_DTLB_SET_E(n,i,what) _XCHAL_DTLB_SET_E(n,i, _ ## what ) +/* + * Example use: XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,ENTRIES) + * to get the value of XCHAL_DTLB_SET<n>_ENTRIES where <n> is the first auto-refill set. + */ + + +/* + * Determine whether we have a full MMU (with Page Table and Protection) + * usable for an MMU-based OS: + */ +#if XCHAL_HAVE_TLBS && !XCHAL_HAVE_SPANNING_WAY && XCHAL_ITLB_ARF_WAYS > 0 && XCHAL_DTLB_ARF_WAYS > 0 && XCHAL_MMU_RINGS >= 2 +# define XCHAL_HAVE_PTP_MMU 1 /* have full MMU (with page table [autorefill] and protection) */ +#else +# define XCHAL_HAVE_PTP_MMU 0 /* don't have full MMU */ +#endif + +/* + * For full MMUs, report kernel RAM segment and kernel I/O segment static page mappings: + */ +#if XCHAL_HAVE_PTP_MMU +#define XCHAL_KSEG_CACHED_VADDR 0xD0000000 /* virt.addr of kernel RAM cached static map */ +#define XCHAL_KSEG_CACHED_PADDR 0x00000000 /* phys.addr of kseg_cached */ +#define XCHAL_KSEG_CACHED_SIZE 0x08000000 /* size in bytes of kseg_cached (assumed power of 2!!!) */ +#define XCHAL_KSEG_BYPASS_VADDR 0xD8000000 /* virt.addr of kernel RAM bypass (uncached) static map */ +#define XCHAL_KSEG_BYPASS_PADDR 0x00000000 /* phys.addr of kseg_bypass */ +#define XCHAL_KSEG_BYPASS_SIZE 0x08000000 /* size in bytes of kseg_bypass (assumed power of 2!!!) */ + +#define XCHAL_KIO_CACHED_VADDR 0xE0000000 /* virt.addr of kernel I/O cached static map */ +#define XCHAL_KIO_CACHED_PADDR 0xF0000000 /* phys.addr of kio_cached */ +#define XCHAL_KIO_CACHED_SIZE 0x10000000 /* size in bytes of kio_cached (assumed power of 2!!!) */ +#define XCHAL_KIO_BYPASS_VADDR 0xF0000000 /* virt.addr of kernel I/O bypass (uncached) static map */ +#define XCHAL_KIO_BYPASS_PADDR 0xF0000000 /* phys.addr of kio_bypass */ +#define XCHAL_KIO_BYPASS_SIZE 0x10000000 /* size in bytes of kio_bypass (assumed power of 2!!!) */ + +#define XCHAL_SEG_MAPPABLE_VADDR 0x00000000 /* start of largest non-static-mapped virtual addr area */ +#define XCHAL_SEG_MAPPABLE_SIZE 0xD0000000 /* size in bytes of " */ +/* define XCHAL_SEG_MAPPABLE2_xxx if more areas present, sorted in order of descending size. */ +#endif + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* number of write buffer entries */ + +#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier + (CoreID) set in the Xtensa Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */ + +/* These definitions describe the hardware targeted by this software: */ +#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */ +#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */ +#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */ +#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */ +#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */ +#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */ +#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */ +#define XTHAL_HW_REL_T1050 1 +#define XTHAL_HW_REL_T1050_1 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 + + +/* + * Miscellaneous special register fields: + */ + + +/* DBREAKC (special register number 160): */ +#define XCHAL_DBREAKC_VALIDMASK 0xC000003F /* bits of DBREAKC that are defined */ +/* MASK field: */ +#define XCHAL_DBREAKC_MASK_BITS 6 /* number of bits in MASK field */ +#define XCHAL_DBREAKC_MASK_NUM 64 /* max number of possible causes (2^bits) */ +#define XCHAL_DBREAKC_MASK_SHIFT 0 /* position of MASK bits in DBREAKC, starting from lsbit */ +#define XCHAL_DBREAKC_MASK_MASK 0x0000003F /* mask of bits in MASK field of DBREAKC */ +/* LOADBREAK field: */ +#define XCHAL_DBREAKC_LOADBREAK_BITS 1 /* number of bits in LOADBREAK field */ +#define XCHAL_DBREAKC_LOADBREAK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DBREAKC_LOADBREAK_SHIFT 30 /* position of LOADBREAK bits in DBREAKC, starting from lsbit */ +#define XCHAL_DBREAKC_LOADBREAK_MASK 0x40000000 /* mask of bits in LOADBREAK field of DBREAKC */ +/* STOREBREAK field: */ +#define XCHAL_DBREAKC_STOREBREAK_BITS 1 /* number of bits in STOREBREAK field */ +#define XCHAL_DBREAKC_STOREBREAK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DBREAKC_STOREBREAK_SHIFT 31 /* position of STOREBREAK bits in DBREAKC, starting from lsbit */ +#define XCHAL_DBREAKC_STOREBREAK_MASK 0x80000000 /* mask of bits in STOREBREAK field of DBREAKC */ + +/* PS (special register number 230): */ +#define XCHAL_PS_VALIDMASK 0x00070FFF /* bits of PS that are defined */ +/* INTLEVEL field: */ +#define XCHAL_PS_INTLEVEL_BITS 4 /* number of bits in INTLEVEL field */ +#define XCHAL_PS_INTLEVEL_NUM 16 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_INTLEVEL_SHIFT 0 /* position of INTLEVEL bits in PS, starting from lsbit */ +#define XCHAL_PS_INTLEVEL_MASK 0x0000000F /* mask of bits in INTLEVEL field of PS */ +/* EXCM field: */ +#define XCHAL_PS_EXCM_BITS 1 /* number of bits in EXCM field */ +#define XCHAL_PS_EXCM_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_EXCM_SHIFT 4 /* position of EXCM bits in PS, starting from lsbit */ +#define XCHAL_PS_EXCM_MASK 0x00000010 /* mask of bits in EXCM field of PS */ +/* PROGSTACK field: */ +#define XCHAL_PS_PROGSTACK_BITS 1 /* number of bits in PROGSTACK field */ +#define XCHAL_PS_PROGSTACK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_PROGSTACK_SHIFT 5 /* position of PROGSTACK bits in PS, starting from lsbit */ +#define XCHAL_PS_PROGSTACK_MASK 0x00000020 /* mask of bits in PROGSTACK field of PS */ +/* RING field: */ +#define XCHAL_PS_RING_BITS 2 /* number of bits in RING field */ +#define XCHAL_PS_RING_NUM 4 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_RING_SHIFT 6 /* position of RING bits in PS, starting from lsbit */ +#define XCHAL_PS_RING_MASK 0x000000C0 /* mask of bits in RING field of PS */ +/* OWB field: */ +#define XCHAL_PS_OWB_BITS 4 /* number of bits in OWB field */ +#define XCHAL_PS_OWB_NUM 16 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_OWB_SHIFT 8 /* position of OWB bits in PS, starting from lsbit */ +#define XCHAL_PS_OWB_MASK 0x00000F00 /* mask of bits in OWB field of PS */ +/* CALLINC field: */ +#define XCHAL_PS_CALLINC_BITS 2 /* number of bits in CALLINC field */ +#define XCHAL_PS_CALLINC_NUM 4 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_CALLINC_SHIFT 16 /* position of CALLINC bits in PS, starting from lsbit */ +#define XCHAL_PS_CALLINC_MASK 0x00030000 /* mask of bits in CALLINC field of PS */ +/* WOE field: */ +#define XCHAL_PS_WOE_BITS 1 /* number of bits in WOE field */ +#define XCHAL_PS_WOE_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_PS_WOE_SHIFT 18 /* position of WOE bits in PS, starting from lsbit */ +#define XCHAL_PS_WOE_MASK 0x00040000 /* mask of bits in WOE field of PS */ + +/* EXCCAUSE (special register number 232): */ +#define XCHAL_EXCCAUSE_VALIDMASK 0x0000003F /* bits of EXCCAUSE that are defined */ +/* EXCCAUSE field: */ +#define XCHAL_EXCCAUSE_BITS 6 /* number of bits in EXCCAUSE register */ +#define XCHAL_EXCCAUSE_NUM 64 /* max number of possible causes (2^bits) */ +#define XCHAL_EXCCAUSE_SHIFT 0 /* position of EXCCAUSE bits in register, starting from lsbit */ +#define XCHAL_EXCCAUSE_MASK 0x0000003F /* mask of bits in EXCCAUSE register */ + +/* DEBUGCAUSE (special register number 233): */ +#define XCHAL_DEBUGCAUSE_VALIDMASK 0x0000003F /* bits of DEBUGCAUSE that are defined */ +/* ICOUNT field: */ +#define XCHAL_DEBUGCAUSE_ICOUNT_BITS 1 /* number of bits in ICOUNT field */ +#define XCHAL_DEBUGCAUSE_ICOUNT_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_ICOUNT_SHIFT 0 /* position of ICOUNT bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_ICOUNT_MASK 0x00000001 /* mask of bits in ICOUNT field of DEBUGCAUSE */ +/* IBREAK field: */ +#define XCHAL_DEBUGCAUSE_IBREAK_BITS 1 /* number of bits in IBREAK field */ +#define XCHAL_DEBUGCAUSE_IBREAK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_IBREAK_SHIFT 1 /* position of IBREAK bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_IBREAK_MASK 0x00000002 /* mask of bits in IBREAK field of DEBUGCAUSE */ +/* DBREAK field: */ +#define XCHAL_DEBUGCAUSE_DBREAK_BITS 1 /* number of bits in DBREAK field */ +#define XCHAL_DEBUGCAUSE_DBREAK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_DBREAK_SHIFT 2 /* position of DBREAK bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_DBREAK_MASK 0x00000004 /* mask of bits in DBREAK field of DEBUGCAUSE */ +/* BREAK field: */ +#define XCHAL_DEBUGCAUSE_BREAK_BITS 1 /* number of bits in BREAK field */ +#define XCHAL_DEBUGCAUSE_BREAK_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_BREAK_SHIFT 3 /* position of BREAK bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_BREAK_MASK 0x00000008 /* mask of bits in BREAK field of DEBUGCAUSE */ +/* BREAKN field: */ +#define XCHAL_DEBUGCAUSE_BREAKN_BITS 1 /* number of bits in BREAKN field */ +#define XCHAL_DEBUGCAUSE_BREAKN_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_BREAKN_SHIFT 4 /* position of BREAKN bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_BREAKN_MASK 0x00000010 /* mask of bits in BREAKN field of DEBUGCAUSE */ +/* DEBUGINT field: */ +#define XCHAL_DEBUGCAUSE_DEBUGINT_BITS 1 /* number of bits in DEBUGINT field */ +#define XCHAL_DEBUGCAUSE_DEBUGINT_NUM 2 /* max number of possible causes (2^bits) */ +#define XCHAL_DEBUGCAUSE_DEBUGINT_SHIFT 5 /* position of DEBUGINT bits in DEBUGCAUSE, starting from lsbit */ +#define XCHAL_DEBUGCAUSE_DEBUGINT_MASK 0x00000020 /* mask of bits in DEBUGINT field of DEBUGCAUSE */ + + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_DENSITY 1 /* 1 if density option configured, 0 otherwise */ +#define XCHAL_HAVE_LOOPS 1 /* 1 if zero-overhead loops option configured, 0 otherwise */ +/* Misc instructions: */ +#define XCHAL_HAVE_NSA 0 /* 1 if NSA/NSAU instructions option configured, 0 otherwise */ +#define XCHAL_HAVE_MINMAX 0 /* 1 if MIN/MAX instructions option configured, 0 otherwise */ +#define XCHAL_HAVE_SEXT 0 /* 1 if sign-extend instruction option configured, 0 otherwise */ +#define XCHAL_HAVE_CLAMPS 0 /* 1 if CLAMPS instruction option configured, 0 otherwise */ +#define XCHAL_HAVE_MAC16 0 /* 1 if MAC16 option configured, 0 otherwise */ +#define XCHAL_HAVE_MUL16 0 /* 1 if 16-bit integer multiply option configured, 0 otherwise */ +/*#define XCHAL_HAVE_POPC 0*/ /* 1 if CRC instruction option configured, 0 otherwise */ +/*#define XCHAL_HAVE_CRC 0*/ /* 1 if POPC instruction option configured, 0 otherwise */ + +#define XCHAL_HAVE_SPECULATION 0 /* 1 if speculation option configured, 0 otherwise */ +/*#define XCHAL_HAVE_MP_SYNC 0*/ /* 1 if multiprocessor sync. option configured, 0 otherwise */ +#define XCHAL_HAVE_PRID 0 /* 1 if processor ID register configured, 0 otherwise */ + +#define XCHAL_NUM_MISC_REGS 2 /* number of miscellaneous registers (0..4) */ + +/* These relate a bit more to TIE: */ +#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */ +#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */ +#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */ + + +/*---------------------------------------------------------------------- + DERIVED + ----------------------------------------------------------------------*/ + +#if XCHAL_HAVE_BE +#define XCHAL_INST_ILLN 0xD60F /* 2-byte illegal instruction, msb-first */ +#define XCHAL_INST_ILLN_BYTE0 0xD6 /* 2-byte illegal instruction, 1st byte */ +#define XCHAL_INST_ILLN_BYTE1 0x0F /* 2-byte illegal instruction, 2nd byte */ +#else +#define XCHAL_INST_ILLN 0xF06D /* 2-byte illegal instruction, lsb-first */ +#define XCHAL_INST_ILLN_BYTE0 0x6D /* 2-byte illegal instruction, 1st byte */ +#define XCHAL_INST_ILLN_BYTE1 0xF0 /* 2-byte illegal instruction, 2nd byte */ +#endif +/* Belongs in xtensa/hal.h: */ +#define XTHAL_INST_ILL 0x000000 /* 3-byte illegal instruction */ + + +/* + * Because information as to exactly which hardware release is targeted + * by a given software build is not always available, compile-time HAL + * Hardware-Release "_AT" macros are fuzzy (return 0, 1, or XCHAL_MAYBE): + */ +#ifndef XCHAL_HW_RELEASE_MAJOR +# define XCHAL_HW_CONFIGID_RELIABLE 0 +#endif +#if XCHAL_HW_CONFIGID_RELIABLE +# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) (XTHAL_REL_LE( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) +# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) (XTHAL_REL_GE( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) +# define XCHAL_HW_RELEASE_AT(major,minor) (XTHAL_REL_EQ( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) +# define XCHAL_HW_RELEASE_MAJOR_AT(major) ((XCHAL_HW_RELEASE_MAJOR == (major)) ? 1 : 0) +#else +# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) ( ((major) < 1040 && XCHAL_HAVE_XEA2) ? 0 \ + : ((major) > 1050 && XCHAL_HAVE_XEA1) ? 1 \ + : XTHAL_MAYBE ) +# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) ( ((major) >= 2000 && XCHAL_HAVE_XEA1) ? 0 \ + : (XTHAL_REL_LE(major,minor, 1040,0) && XCHAL_HAVE_XEA2) ? 1 \ + : XTHAL_MAYBE ) +# define XCHAL_HW_RELEASE_AT(major,minor) ( (((major) < 1040 && XCHAL_HAVE_XEA2) || \ + ((major) >= 2000 && XCHAL_HAVE_XEA1)) ? 0 : XTHAL_MAYBE) +# define XCHAL_HW_RELEASE_MAJOR_AT(major) XCHAL_HW_RELEASE_AT(major,0) +#endif + +/* + * Specific errata: + */ + +/* + * Erratum T1020.H13, T1030.H7, T1040.H10, T1050.H4 (fixed in T1040.3 and T1050.1; + * relevant only in XEA1, kernel-vector mode, level-one interrupts and overflows enabled): + */ +#define XCHAL_MAYHAVE_ERRATUM_XEA1KWIN (XCHAL_HAVE_XEA1 && \ + (XCHAL_HW_RELEASE_AT_OR_BELOW(1040,2) != 0 \ + || XCHAL_HW_RELEASE_AT(1050,0))) + + + +#endif /*XTENSA_CONFIG_CORE_H*/ + diff --git a/include/asm-xtensa/xtensa/config-linux_be/defs.h b/include/asm-xtensa/xtensa/config-linux_be/defs.h new file mode 100644 index 000000000000..f7c58b273371 --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/defs.h @@ -0,0 +1,270 @@ +/* Definitions for Xtensa instructions, types, and protos. */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + +/* Do not modify. This is automatically generated.*/ + +#ifndef _XTENSA_BASE_HEADER +#define _XTENSA_BASE_HEADER + +#ifdef __XTENSA__ +#if defined(__GNUC__) && !defined(__XCC__) + +#define L8UI_ASM(arr, ars, imm) { \ + __asm__ volatile("l8ui %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ +} + +#define XT_L8UI(ars, imm) \ +({ \ + unsigned char _arr; \ + const unsigned char *_ars = ars; \ + L8UI_ASM(_arr, _ars, imm); \ + _arr; \ +}) + +#define L16UI_ASM(arr, ars, imm) { \ + __asm__ volatile("l16ui %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ +} + +#define XT_L16UI(ars, imm) \ +({ \ + unsigned short _arr; \ + const unsigned short *_ars = ars; \ + L16UI_ASM(_arr, _ars, imm); \ + _arr; \ +}) + +#define L16SI_ASM(arr, ars, imm) {\ + __asm__ volatile("l16si %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ +} + +#define XT_L16SI(ars, imm) \ +({ \ + signed short _arr; \ + const signed short *_ars = ars; \ + L16SI_ASM(_arr, _ars, imm); \ + _arr; \ +}) + +#define L32I_ASM(arr, ars, imm) { \ + __asm__ volatile("l32i %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ +} + +#define XT_L32I(ars, imm) \ +({ \ + unsigned _arr; \ + const unsigned *_ars = ars; \ + L32I_ASM(_arr, _ars, imm); \ + _arr; \ +}) + +#define S8I_ASM(arr, ars, imm) {\ + __asm__ volatile("s8i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ +} + +#define XT_S8I(arr, ars, imm) \ +({ \ + signed char _arr = arr; \ + const signed char *_ars = ars; \ + S8I_ASM(_arr, _ars, imm); \ +}) + +#define S16I_ASM(arr, ars, imm) {\ + __asm__ volatile("s16i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ +} + +#define XT_S16I(arr, ars, imm) \ +({ \ + signed short _arr = arr; \ + const signed short *_ars = ars; \ + S16I_ASM(_arr, _ars, imm); \ +}) + +#define S32I_ASM(arr, ars, imm) { \ + __asm__ volatile("s32i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ +} + +#define XT_S32I(arr, ars, imm) \ +({ \ + signed int _arr = arr; \ + const signed int *_ars = ars; \ + S32I_ASM(_arr, _ars, imm); \ +}) + +#define ADDI_ASM(art, ars, imm) {\ + __asm__ ("addi %0, %1, %2" : "=a" (art) : "a" (ars), "i" (imm)); \ +} + +#define XT_ADDI(ars, imm) \ +({ \ + unsigned _art; \ + unsigned _ars = ars; \ + ADDI_ASM(_art, _ars, imm); \ + _art; \ +}) + +#define ABS_ASM(arr, art) {\ + __asm__ ("abs %0, %1" : "=a" (arr) : "a" (art)); \ +} + +#define XT_ABS(art) \ +({ \ + unsigned _arr; \ + signed _art = art; \ + ABS_ASM(_arr, _art); \ + _arr; \ +}) + +/* Note: In the following macros that reference SAR, the magic "state" + register is used to capture the dependency on SAR. This is because + SAR is a 5-bit register and thus there are no C types that can be + used to represent it. It doesn't appear that the SAR register is + even relevant to GCC, but it is marked as "clobbered" just in + case. */ + +#define SRC_ASM(arr, ars, art) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("src %0, %1, %2" \ + : "=a" (arr) : "a" (ars), "a" (art), "t" (_xt_sar)); \ +} + +#define XT_SRC(ars, art) \ +({ \ + unsigned _arr; \ + unsigned _ars = ars; \ + unsigned _art = art; \ + SRC_ASM(_arr, _ars, _art); \ + _arr; \ +}) + +#define SSR_ASM(ars) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("ssr %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ +} + +#define XT_SSR(ars) \ +({ \ + unsigned _ars = ars; \ + SSR_ASM(_ars); \ +}) + +#define SSL_ASM(ars) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("ssl %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ +} + +#define XT_SSL(ars) \ +({ \ + unsigned _ars = ars; \ + SSL_ASM(_ars); \ +}) + +#define SSA8B_ASM(ars) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("ssa8b %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ +} + +#define XT_SSA8B(ars) \ +({ \ + unsigned _ars = ars; \ + SSA8B_ASM(_ars); \ +}) + +#define SSA8L_ASM(ars) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("ssa8l %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ +} + +#define XT_SSA8L(ars) \ +({ \ + unsigned _ars = ars; \ + SSA8L_ASM(_ars); \ +}) + +#define SSAI_ASM(imm) {\ + register int _xt_sar __asm__ ("state"); \ + __asm__ ("ssai %1" : "=t" (_xt_sar) : "i" (imm) : "sar"); \ +} + +#define XT_SSAI(imm) \ +({ \ + SSAI_ASM(imm); \ +}) + + + + + + + + +#endif /* __GNUC__ && !__XCC__ */ + +#ifdef __XCC__ + +/* Core load/store instructions */ +extern unsigned char _TIE_L8UI(const unsigned char * ars, immediate imm); +extern unsigned short _TIE_L16UI(const unsigned short * ars, immediate imm); +extern signed short _TIE_L16SI(const signed short * ars, immediate imm); +extern unsigned _TIE_L32I(const unsigned * ars, immediate imm); +extern void _TIE_S8I(unsigned char arr, unsigned char * ars, immediate imm); +extern void _TIE_S16I(unsigned short arr, unsigned short * ars, immediate imm); +extern void _TIE_S32I(unsigned arr, unsigned * ars, immediate imm); + +#define XT_L8UI _TIE_L8UI +#define XT_L16UI _TIE_L16UI +#define XT_L16SI _TIE_L16SI +#define XT_L32I _TIE_L32I +#define XT_S8I _TIE_S8I +#define XT_S16I _TIE_S16I +#define XT_S32I _TIE_S32I + +/* Add-immediate instruction */ +extern unsigned _TIE_ADDI(unsigned ars, immediate imm); +#define XT_ADDI _TIE_ADDI + +/* Absolute value instruction */ +extern unsigned _TIE_ABS(int art); +#define XT_ABS _TIE_ABS + +/* funnel shift instructions */ +extern unsigned _TIE_SRC(unsigned ars, unsigned art); +#define XT_SRC _TIE_SRC +extern void _TIE_SSR(unsigned ars); +#define XT_SSR _TIE_SSR +extern void _TIE_SSL(unsigned ars); +#define XT_SSL _TIE_SSL +extern void _TIE_SSA8B(unsigned ars); +#define XT_SSA8B _TIE_SSA8B +extern void _TIE_SSA8L(unsigned ars); +#define XT_SSA8L _TIE_SSA8L +extern void _TIE_SSAI(immediate imm); +#define XT_SSAI _TIE_SSAI + + +#endif /* __XCC__ */ + +#endif /* __XTENSA__ */ +#endif /* !_XTENSA_BASE_HEADER */ diff --git a/include/asm-xtensa/xtensa/config-linux_be/specreg.h b/include/asm-xtensa/xtensa/config-linux_be/specreg.h new file mode 100644 index 000000000000..fa4106aa9a02 --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/specreg.h @@ -0,0 +1,99 @@ +/* + * Xtensa Special Register symbolic names + */ + +/* $Id: specreg.h,v 1.2 2003/03/07 19:15:18 joetaylor Exp $ */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + +#ifndef XTENSA_SPECREG_H +#define XTENSA_SPECREG_H + +/* Include these special register bitfield definitions, for historical reasons: */ +#include <xtensa/corebits.h> + + +/* Special registers: */ +#define LBEG 0 +#define LEND 1 +#define LCOUNT 2 +#define SAR 3 +#define WINDOWBASE 72 +#define WINDOWSTART 73 +#define PTEVADDR 83 +#define RASID 90 +#define ITLBCFG 91 +#define DTLBCFG 92 +#define IBREAKENABLE 96 +#define DDR 104 +#define IBREAKA_0 128 +#define IBREAKA_1 129 +#define DBREAKA_0 144 +#define DBREAKA_1 145 +#define DBREAKC_0 160 +#define DBREAKC_1 161 +#define EPC_1 177 +#define EPC_2 178 +#define EPC_3 179 +#define EPC_4 180 +#define DEPC 192 +#define EPS_2 194 +#define EPS_3 195 +#define EPS_4 196 +#define EXCSAVE_1 209 +#define EXCSAVE_2 210 +#define EXCSAVE_3 211 +#define EXCSAVE_4 212 +#define INTERRUPT 226 +#define INTENABLE 228 +#define PS 230 +#define EXCCAUSE 232 +#define DEBUGCAUSE 233 +#define CCOUNT 234 +#define ICOUNT 236 +#define ICOUNTLEVEL 237 +#define EXCVADDR 238 +#define CCOMPARE_0 240 +#define CCOMPARE_1 241 +#define CCOMPARE_2 242 +#define MISC_REG_0 244 +#define MISC_REG_1 245 + +/* Special cases (bases of special register series): */ +#define IBREAKA 128 +#define DBREAKA 144 +#define DBREAKC 160 +#define EPC 176 +#define EPS 192 +#define EXCSAVE 208 +#define CCOMPARE 240 + +/* Special names for read-only and write-only interrupt registers: */ +#define INTREAD 226 +#define INTSET 226 +#define INTCLEAR 227 + +#endif /* XTENSA_SPECREG_H */ + diff --git a/include/asm-xtensa/xtensa/config-linux_be/system.h b/include/asm-xtensa/xtensa/config-linux_be/system.h new file mode 100644 index 000000000000..cf9d4d308e3a --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/system.h @@ -0,0 +1,198 @@ +/* + * xtensa/config/system.h -- HAL definitions that are dependent on SYSTEM configuration + * + * NOTE: The location and contents of this file are highly subject to change. + * + * Source for configuration-independent binaries (which link in a + * configuration-specific HAL library) must NEVER include this file. + * The HAL itself has historically included this file in some instances, + * but this is not appropriate either, because the HAL is meant to be + * core-specific but system independent. + */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + + +#ifndef XTENSA_CONFIG_SYSTEM_H +#define XTENSA_CONFIG_SYSTEM_H + +/*#include <xtensa/hal.h>*/ + + + +/*---------------------------------------------------------------------- + DEVICE ADDRESSES + ----------------------------------------------------------------------*/ + +/* + * Strange place to find these, but the configuration GUI + * allows moving these around to account for various core + * configurations. Specific boards (and their BSP software) + * will have specific meanings for these components. + */ + +/* I/O Block areas: */ +#define XSHAL_IOBLOCK_CACHED_VADDR 0xE0000000 +#define XSHAL_IOBLOCK_CACHED_PADDR 0xF0000000 +#define XSHAL_IOBLOCK_CACHED_SIZE 0x0E000000 + +#define XSHAL_IOBLOCK_BYPASS_VADDR 0xF0000000 +#define XSHAL_IOBLOCK_BYPASS_PADDR 0xF0000000 +#define XSHAL_IOBLOCK_BYPASS_SIZE 0x0E000000 + +/* System ROM: */ +#define XSHAL_ROM_VADDR 0xEE000000 +#define XSHAL_ROM_PADDR 0xFE000000 +#define XSHAL_ROM_SIZE 0x00400000 +/* Largest available area (free of vectors): */ +#define XSHAL_ROM_AVAIL_VADDR 0xEE00052C +#define XSHAL_ROM_AVAIL_VSIZE 0x003FFAD4 + +/* System RAM: */ +#define XSHAL_RAM_VADDR 0xD0000000 +#define XSHAL_RAM_PADDR 0x00000000 +#define XSHAL_RAM_VSIZE 0x08000000 +#define XSHAL_RAM_PSIZE 0x10000000 +#define XSHAL_RAM_SIZE XSHAL_RAM_PSIZE +/* Largest available area (free of vectors): */ +#define XSHAL_RAM_AVAIL_VADDR 0xD0000370 +#define XSHAL_RAM_AVAIL_VSIZE 0x07FFFC90 + +/* + * Shadow system RAM (same device as system RAM, at different address). + * (Emulation boards need this for the SONIC Ethernet driver + * when data caches are configured for writeback mode.) + * NOTE: on full MMU configs, this points to the BYPASS virtual address + * of system RAM, ie. is the same as XSHAL_RAM_* except that virtual + * addresses are viewed through the BYPASS static map rather than + * the CACHED static map. + */ +#define XSHAL_RAM_BYPASS_VADDR 0xD8000000 +#define XSHAL_RAM_BYPASS_PADDR 0x00000000 +#define XSHAL_RAM_BYPASS_PSIZE 0x08000000 + +/* Alternate system RAM (different device than system RAM): */ +#define XSHAL_ALTRAM_VADDR 0xCEE00000 +#define XSHAL_ALTRAM_PADDR 0xC0000000 +#define XSHAL_ALTRAM_SIZE 0x00200000 + + +/*---------------------------------------------------------------------- + * DEVICE-ADDRESS DEPENDENT... + * + * Values written to CACHEATTR special register (or its equivalent) + * to enable and disable caches in various modes. + *----------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------- + BACKWARD COMPATIBILITY ... + ----------------------------------------------------------------------*/ + +/* + * NOTE: the following two macros are DEPRECATED. Use the latter + * board-specific macros instead, which are specially tuned for the + * particular target environments' memory maps. + */ +#define XSHAL_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS /* disable caches in bypass mode */ +#define XSHAL_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT /* default setting to enable caches (no writeback!) */ + +/*---------------------------------------------------------------------- + ISS (Instruction Set Simulator) SPECIFIC ... + ----------------------------------------------------------------------*/ + +#define XSHAL_ISS_CACHEATTR_WRITEBACK 0x1122222F /* enable caches in write-back mode */ +#define XSHAL_ISS_CACHEATTR_WRITEALLOC 0x1122222F /* enable caches in write-allocate mode */ +#define XSHAL_ISS_CACHEATTR_WRITETHRU 0x1122222F /* enable caches in write-through mode */ +#define XSHAL_ISS_CACHEATTR_BYPASS 0x2222222F /* disable caches in bypass mode */ +#define XSHAL_ISS_CACHEATTR_DEFAULT XSHAL_ISS_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +/* For Coware only: */ +#define XSHAL_COWARE_CACHEATTR_WRITEBACK 0x11222222 /* enable caches in write-back mode */ +#define XSHAL_COWARE_CACHEATTR_WRITEALLOC 0x11222222 /* enable caches in write-allocate mode */ +#define XSHAL_COWARE_CACHEATTR_WRITETHRU 0x11222222 /* enable caches in write-through mode */ +#define XSHAL_COWARE_CACHEATTR_BYPASS 0x22222222 /* disable caches in bypass mode */ +#define XSHAL_COWARE_CACHEATTR_DEFAULT XSHAL_COWARE_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +/* For BFM and other purposes: */ +#define XSHAL_ALLVALID_CACHEATTR_WRITEBACK 0x11222222 /* enable caches without any invalid regions */ +#define XSHAL_ALLVALID_CACHEATTR_DEFAULT XSHAL_ALLVALID_CACHEATTR_WRITEBACK /* default setting for caches without any invalid regions */ + +#define XSHAL_ISS_PIPE_REGIONS 0 +#define XSHAL_ISS_SDRAM_REGIONS 0 + + +/*---------------------------------------------------------------------- + XT2000 BOARD SPECIFIC ... + ----------------------------------------------------------------------*/ + +#define XSHAL_XT2000_CACHEATTR_WRITEBACK 0x22FFFFFF /* enable caches in write-back mode */ +#define XSHAL_XT2000_CACHEATTR_WRITEALLOC 0x22FFFFFF /* enable caches in write-allocate mode */ +#define XSHAL_XT2000_CACHEATTR_WRITETHRU 0x22FFFFFF /* enable caches in write-through mode */ +#define XSHAL_XT2000_CACHEATTR_BYPASS 0x22FFFFFF /* disable caches in bypass mode */ +#define XSHAL_XT2000_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_WRITEBACK /* default setting to enable caches */ + +#define XSHAL_XT2000_PIPE_REGIONS 0x00001000 /* BusInt pipeline regions */ +#define XSHAL_XT2000_SDRAM_REGIONS 0x00000005 /* BusInt SDRAM regions */ + + +/*---------------------------------------------------------------------- + VECTOR SIZES + ----------------------------------------------------------------------*/ + +/* + * Sizes allocated to vectors by the system (memory map) configuration. + * These sizes are constrained by core configuration (eg. one vector's + * code cannot overflow into another vector) but are dependent on the + * system or board (or LSP) memory map configuration. + * + * Whether or not each vector happens to be in a system ROM is also + * a system configuration matter, sometimes useful, included here also: + */ +#define XSHAL_RESET_VECTOR_SIZE 0x000004E0 +#define XSHAL_RESET_VECTOR_ISROM 1 +#define XSHAL_USER_VECTOR_SIZE 0x0000001C +#define XSHAL_USER_VECTOR_ISROM 0 +#define XSHAL_PROGRAMEXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_USEREXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_KERNEL_VECTOR_SIZE 0x0000001C +#define XSHAL_KERNEL_VECTOR_ISROM 0 +#define XSHAL_STACKEDEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_KERNELEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ +#define XSHAL_DOUBLEEXC_VECTOR_SIZE 0x000000E0 +#define XSHAL_DOUBLEEXC_VECTOR_ISROM 0 +#define XSHAL_WINDOW_VECTORS_SIZE 0x00000180 +#define XSHAL_WINDOW_VECTORS_ISROM 0 +#define XSHAL_INTLEVEL2_VECTOR_SIZE 0x0000000C +#define XSHAL_INTLEVEL2_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL3_VECTOR_SIZE 0x0000000C +#define XSHAL_INTLEVEL3_VECTOR_ISROM 0 +#define XSHAL_INTLEVEL4_VECTOR_SIZE 0x0000000C +#define XSHAL_INTLEVEL4_VECTOR_ISROM 1 +#define XSHAL_DEBUG_VECTOR_SIZE XSHAL_INTLEVEL4_VECTOR_SIZE +#define XSHAL_DEBUG_VECTOR_ISROM XSHAL_INTLEVEL4_VECTOR_ISROM + + +#endif /*XTENSA_CONFIG_SYSTEM_H*/ + diff --git a/include/asm-xtensa/xtensa/config-linux_be/tie.h b/include/asm-xtensa/xtensa/config-linux_be/tie.h new file mode 100644 index 000000000000..3c2e514602f4 --- /dev/null +++ b/include/asm-xtensa/xtensa/config-linux_be/tie.h @@ -0,0 +1,275 @@ +/* + * xtensa/config/tie.h -- HAL definitions that are dependent on CORE and TIE configuration + * + * This header file is sometimes referred to as the "compile-time HAL" or CHAL. + * It was generated for a specific Xtensa processor configuration, + * and furthermore for a specific set of TIE source files that extend + * basic core functionality. + * + * Source for configuration-independent binaries (which link in a + * configuration-specific HAL library) must NEVER include this file. + * It is perfectly normal, however, for the HAL source itself to include this file. + */ + +/* + * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + + +#ifndef XTENSA_CONFIG_TIE_H +#define XTENSA_CONFIG_TIE_H + +#include <xtensa/hal.h> + + +/*---------------------------------------------------------------------- + GENERAL + ----------------------------------------------------------------------*/ + +/* + * Separators for macros that expand into arrays. + * These can be predefined by files that #include this one, + * when different separators are required. + */ +/* Element separator for macros that expand into 1-dimensional arrays: */ +#ifndef XCHAL_SEP +#define XCHAL_SEP , +#endif +/* Array separator for macros that expand into 2-dimensional arrays: */ +#ifndef XCHAL_SEP2 +#define XCHAL_SEP2 },{ +#endif + + + + + + +/*---------------------------------------------------------------------- + COPROCESSORS and EXTRA STATE + ----------------------------------------------------------------------*/ + +#define XCHAL_CP_NUM 0 /* number of coprocessors */ +#define XCHAL_CP_MAX 0 /* max coprocessor id plus one (0 if none) */ +#define XCHAL_CP_MASK 0x00 /* bitmask of coprocessors by id */ + +/* Space for coprocessors' state save areas: */ +#define XCHAL_CP0_SA_SIZE 0 +#define XCHAL_CP1_SA_SIZE 0 +#define XCHAL_CP2_SA_SIZE 0 +#define XCHAL_CP3_SA_SIZE 0 +#define XCHAL_CP4_SA_SIZE 0 +#define XCHAL_CP5_SA_SIZE 0 +#define XCHAL_CP6_SA_SIZE 0 +#define XCHAL_CP7_SA_SIZE 0 +/* Minimum required alignments of CP state save areas: */ +#define XCHAL_CP0_SA_ALIGN 1 +#define XCHAL_CP1_SA_ALIGN 1 +#define XCHAL_CP2_SA_ALIGN 1 +#define XCHAL_CP3_SA_ALIGN 1 +#define XCHAL_CP4_SA_ALIGN 1 +#define XCHAL_CP5_SA_ALIGN 1 +#define XCHAL_CP6_SA_ALIGN 1 +#define XCHAL_CP7_SA_ALIGN 1 + +/* Indexing macros: */ +#define _XCHAL_CP_SA_SIZE(n) XCHAL_CP ## n ## _SA_SIZE +#define XCHAL_CP_SA_SIZE(n) _XCHAL_CP_SA_SIZE(n) /* n = 0 .. 7 */ +#define _XCHAL_CP_SA_ALIGN(n) XCHAL_CP ## n ## _SA_ALIGN +#define XCHAL_CP_SA_ALIGN(n) _XCHAL_CP_SA_ALIGN(n) /* n = 0 .. 7 */ + + +/* Space for "extra" state (user special registers and non-cp TIE) save area: */ +#define XCHAL_EXTRA_SA_SIZE 0 +#define XCHAL_EXTRA_SA_ALIGN 1 + +/* Total save area size (extra + all coprocessors) */ +/* (not useful until xthal_{save,restore}_all_extra() is implemented, */ +/* but included for Tor2 beta; doesn't account for alignment!): */ +#define XCHAL_CPEXTRA_SA_SIZE_TOR2 0 /* Tor2Beta temporary definition -- do not use */ + +/* Combined required alignment for all CP and EXTRA state save areas */ +/* (does not include required alignment for any base config registers): */ +#define XCHAL_CPEXTRA_SA_ALIGN 1 + +/* ... */ + + +#ifdef _ASMLANGUAGE +/* + * Assembly-language specific definitions (assembly macros, etc.). + */ +#include <xtensa/config/specreg.h> + +/******************** + * Macros to save and restore the non-coprocessor TIE portion of EXTRA state. + */ + +/* (none) */ + + +/******************** + * Macros to create functions that save and restore all EXTRA (non-coprocessor) state + * (does not include zero-overhead loop registers and non-optional registers). + */ + + /* + * Macro that expands to the body of a function that + * stores the extra (non-coprocessor) optional/custom state. + * Entry: a2 = ptr to save area in which to save extra state + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_extra_store_funcbody + .endm + + + /* + * Macro that expands to the body of a function that + * loads the extra (non-coprocessor) optional/custom state. + * Entry: a2 = ptr to save area from which to restore extra state + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_extra_load_funcbody + .endm + + +/******************** + * Macros to save and restore the state of each TIE coprocessor. + */ + + + +/******************** + * Macros to create functions that save and restore the state of *any* TIE coprocessor. + */ + + /* + * Macro that expands to the body of a function + * that stores the selected coprocessor's state (registers etc). + * Entry: a2 = ptr to save area in which to save cp state + * a3 = coprocessor number + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_cpi_store_funcbody + .endm + + + /* + * Macro that expands to the body of a function + * that loads the selected coprocessor's state (registers etc). + * Entry: a2 = ptr to save area from which to restore cp state + * a3 = coprocessor number + * Exit: any register a2-a15 (?) may have been clobbered. + */ + .macro xchal_cpi_load_funcbody + .endm + +#endif /*_ASMLANGUAGE*/ + + +/* + * Contents of save areas in terms of libdb register numbers. + * NOTE: CONTENTS_LIBDB_{UREG,REGF} macros are not defined in this file; + * it is up to the user of this header file to define these macros + * usefully before each expansion of the CONTENTS_LIBDB macros. + * (Fields rsv[123] are reserved for future additions; they are currently + * set to zero but may be set to some useful values in the future.) + * + * CONTENTS_LIBDB_SREG(libdbnum, offset, size, align, rsv1, name, sregnum, bitmask, rsv2, rsv3) + * CONTENTS_LIBDB_UREG(libdbnum, offset, size, align, rsv1, name, uregnum, bitmask, rsv2, rsv3) + * CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, numentries, contentsize, regname_base, regfile_name, rsv2, rsv3) + */ + +#define XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_EXTRA_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP0_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP0_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP1_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP1_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP2_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP2_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP3_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP3_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP4_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP4_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP5_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP5_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP6_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP6_SA_CONTENTS_LIBDB /* empty */ + +#define XCHAL_CP7_SA_CONTENTS_LIBDB_NUM 0 +#define XCHAL_CP7_SA_CONTENTS_LIBDB /* empty */ + + + + + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#if 0 /* is there something equivalent for user TIE? */ +#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier + (CoreID) set in the Xtensa Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */ + +/* These definitions describe the hardware targeted by this software: */ +#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */ +#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */ +#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */ +#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */ +#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */ +#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */ +#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */ +#define XTHAL_HW_REL_T1050 1 +#define XTHAL_HW_REL_T1050_1 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +#endif /*0*/ + + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#if 0 /* these probably don't belong here, but are related to or implemented using TIE */ +#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */ +/* Misc instructions: */ +#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */ + +#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */ +#endif /*0*/ + + +#endif /*XTENSA_CONFIG_TIE_H*/ + |