diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/micrel/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/micrel/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/micrel/ks8695net.c | 1632 | ||||
| -rw-r--r-- | drivers/net/ethernet/micrel/ks8695net.h | 108 | ||||
| -rw-r--r-- | drivers/net/ethernet/nuvoton/Kconfig | 29 | ||||
| -rw-r--r-- | drivers/net/ethernet/nuvoton/Makefile | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/nuvoton/w90p910_ether.c | 1080 | ||||
| -rw-r--r-- | drivers/net/ethernet/nxp/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/nxp/lpc_eth.c | 45 | ||||
| -rw-r--r-- | drivers/net/phy/mdio_bus.c | 9 |
13 files changed, 22 insertions, 2911 deletions
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 2830dc283ce6..1e2de9d062bf 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -151,7 +151,6 @@ config NET_NETX To compile this driver as a module, choose M here. The module will be called netx-eth. -source "drivers/net/ethernet/nuvoton/Kconfig" source "drivers/net/ethernet/nvidia/Kconfig" source "drivers/net/ethernet/nxp/Kconfig" source "drivers/net/ethernet/oki-semi/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 061edd22f507..77f9838a76c9 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -65,7 +65,6 @@ obj-$(CONFIG_NET_VENDOR_NETERION) += neterion/ obj-$(CONFIG_NET_VENDOR_NETRONOME) += netronome/ obj-$(CONFIG_NET_VENDOR_NI) += ni/ obj-$(CONFIG_NET_NETX) += netx-eth.o -obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/ obj-$(CONFIG_NET_VENDOR_NVIDIA) += nvidia/ obj-$(CONFIG_LPC_ENET) += nxp/ obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/ diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c index bb6586d0e5af..ed3829ae4ef1 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c @@ -754,17 +754,11 @@ struct dsaf_misc_op *hns_misc_op_get(struct dsaf_device *dsaf_dev) return (void *)misc_op; } -static int hns_dsaf_dev_match(struct device *dev, const void *fwnode) -{ - return dev->fwnode == fwnode; -} - struct platform_device *hns_dsaf_find_platform_device(struct fwnode_handle *fwnode) { struct device *dev; - dev = bus_find_device(&platform_bus_type, NULL, - fwnode, hns_dsaf_dev_match); + dev = bus_find_device_by_fwnode(&platform_bus_type, fwnode); return dev ? to_platform_device(dev) : NULL; } diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig index 90a8c6bead56..b9c4d48e28e4 100644 --- a/drivers/net/ethernet/micrel/Kconfig +++ b/drivers/net/ethernet/micrel/Kconfig @@ -6,8 +6,7 @@ config NET_VENDOR_MICREL bool "Micrel devices" default y - depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM || \ - (ARM && ARCH_KS8695) + depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM ---help--- If you have a network (Ethernet) card belonging to this class, say Y. @@ -18,14 +17,6 @@ config NET_VENDOR_MICREL if NET_VENDOR_MICREL -config ARM_KS8695_ETHER - tristate "KS8695 Ethernet support" - depends on ARM && ARCH_KS8695 - select MII - ---help--- - If you wish to compile a kernel for the KS8695 and want to - use the internal ethernet then you should answer Y to this. - config KS8842 tristate "Micrel KSZ8841/42 with generic bus interface" depends on HAS_IOMEM && DMA_ENGINE diff --git a/drivers/net/ethernet/micrel/Makefile b/drivers/net/ethernet/micrel/Makefile index 848fc1c5a5dc..6d8ac5527aef 100644 --- a/drivers/net/ethernet/micrel/Makefile +++ b/drivers/net/ethernet/micrel/Makefile @@ -3,7 +3,6 @@ # Makefile for the Micrel network device drivers. # -obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o obj-$(CONFIG_KS8842) += ks8842.o obj-$(CONFIG_KS8851) += ks8851.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o diff --git a/drivers/net/ethernet/micrel/ks8695net.c b/drivers/net/ethernet/micrel/ks8695net.c deleted file mode 100644 index 1390ef5323a2..000000000000 --- a/drivers/net/ethernet/micrel/ks8695net.c +++ /dev/null @@ -1,1632 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Micrel KS8695 (Centaur) Ethernet. - * - * Copyright 2008 Simtec Electronics - * Daniel Silverstone <dsilvers@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - */ - -#include <linux/dma-mapping.h> -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/interrupt.h> -#include <linux/skbuff.h> -#include <linux/spinlock.h> -#include <linux/crc32.h> -#include <linux/mii.h> -#include <linux/ethtool.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <asm/irq.h> - -#include <mach/regs-switch.h> -#include <mach/regs-misc.h> -#include <asm/mach/irq.h> -#include <mach/regs-irq.h> - -#include "ks8695net.h" - -#define MODULENAME "ks8695_ether" -#define MODULEVERSION "1.02" - -/* - * Transmit and device reset timeout, default 5 seconds. - */ -static int watchdog = 5000; - -/* Hardware structures */ - -/** - * struct rx_ring_desc - Receive descriptor ring element - * @status: The status of the descriptor element (E.g. who owns it) - * @length: The number of bytes in the block pointed to by data_ptr - * @data_ptr: The physical address of the data block to receive into - * @next_desc: The physical address of the next descriptor element. - */ -struct rx_ring_desc { - __le32 status; - __le32 length; - __le32 data_ptr; - __le32 next_desc; -}; - -/** - * struct tx_ring_desc - Transmit descriptor ring element - * @owner: Who owns the descriptor - * @status: The number of bytes in the block pointed to by data_ptr - * @data_ptr: The physical address of the data block to receive into - * @next_desc: The physical address of the next descriptor element. - */ -struct tx_ring_desc { - __le32 owner; - __le32 status; - __le32 data_ptr; - __le32 next_desc; -}; - -/** - * struct ks8695_skbuff - sk_buff wrapper for rx/tx rings. - * @skb: The buffer in the ring - * @dma_ptr: The mapped DMA pointer of the buffer - * @length: The number of bytes mapped to dma_ptr - */ -struct ks8695_skbuff { - struct sk_buff *skb; - dma_addr_t dma_ptr; - u32 length; -}; - -/* Private device structure */ - -#define MAX_TX_DESC 8 -#define MAX_TX_DESC_MASK 0x7 -#define MAX_RX_DESC 16 -#define MAX_RX_DESC_MASK 0xf - -/*napi_weight have better more than rx DMA buffers*/ -#define NAPI_WEIGHT 64 - -#define MAX_RXBUF_SIZE 0x700 - -#define TX_RING_DMA_SIZE (sizeof(struct tx_ring_desc) * MAX_TX_DESC) -#define RX_RING_DMA_SIZE (sizeof(struct rx_ring_desc) * MAX_RX_DESC) -#define RING_DMA_SIZE (TX_RING_DMA_SIZE + RX_RING_DMA_SIZE) - -/** - * enum ks8695_dtype - Device type - * @KS8695_DTYPE_WAN: This device is a WAN interface - * @KS8695_DTYPE_LAN: This device is a LAN interface - * @KS8695_DTYPE_HPNA: This device is an HPNA interface - */ -enum ks8695_dtype { - KS8695_DTYPE_WAN, - KS8695_DTYPE_LAN, - KS8695_DTYPE_HPNA, -}; - -/** - * struct ks8695_priv - Private data for the KS8695 Ethernet - * @in_suspend: Flag to indicate if we're suspending/resuming - * @ndev: The net_device for this interface - * @dev: The platform device object for this interface - * @dtype: The type of this device - * @io_regs: The ioremapped registers for this interface - * @napi : Add support NAPI for Rx - * @rx_irq_name: The textual name of the RX IRQ from the platform data - * @tx_irq_name: The textual name of the TX IRQ from the platform data - * @link_irq_name: The textual name of the link IRQ from the - * platform data if available - * @rx_irq: The IRQ number for the RX IRQ - * @tx_irq: The IRQ number for the TX IRQ - * @link_irq: The IRQ number for the link IRQ if available - * @regs_req: The resource request for the registers region - * @phyiface_req: The resource request for the phy/switch region - * if available - * @phyiface_regs: The ioremapped registers for the phy/switch if available - * @ring_base: The base pointer of the dma coherent memory for the rings - * @ring_base_dma: The DMA mapped equivalent of ring_base - * @tx_ring: The pointer in ring_base of the TX ring - * @tx_ring_used: The number of slots in the TX ring which are occupied - * @tx_ring_next_slot: The next slot to fill in the TX ring - * @tx_ring_dma: The DMA mapped equivalent of tx_ring - * @tx_buffers: The sk_buff mappings for the TX ring - * @txq_lock: A lock to protect the tx_buffers tx_ring_used etc variables - * @rx_ring: The pointer in ring_base of the RX ring - * @rx_ring_dma: The DMA mapped equivalent of rx_ring - * @rx_buffers: The sk_buff mappings for the RX ring - * @next_rx_desc_read: The next RX descriptor to read from on IRQ - * @rx_lock: A lock to protect Rx irq function - * @msg_enable: The flags for which messages to emit - */ -struct ks8695_priv { - int in_suspend; - struct net_device *ndev; - struct device *dev; - enum ks8695_dtype dtype; - void __iomem *io_regs; - - struct napi_struct napi; - - const char *rx_irq_name, *tx_irq_name, *link_irq_name; - int rx_irq, tx_irq, link_irq; - - struct resource *regs_req, *phyiface_req; - void __iomem *phyiface_regs; - - void *ring_base; - dma_addr_t ring_base_dma; - - struct tx_ring_desc *tx_ring; - int tx_ring_used; - int tx_ring_next_slot; - dma_addr_t tx_ring_dma; - struct ks8695_skbuff tx_buffers[MAX_TX_DESC]; - spinlock_t txq_lock; - - struct rx_ring_desc *rx_ring; - dma_addr_t rx_ring_dma; - struct ks8695_skbuff rx_buffers[MAX_RX_DESC]; - int next_rx_desc_read; - spinlock_t rx_lock; - - int msg_enable; -}; - -/* Register access */ - -/** - * ks8695_readreg - Read from a KS8695 ethernet register - * @ksp: The device to read from - * @reg: The register to read - */ -static inline u32 -ks8695_readreg(struct ks8695_priv *ksp, int reg) -{ - return readl(ksp->io_regs + reg); -} - -/** - * ks8695_writereg - Write to a KS8695 ethernet register - * @ksp: The device to write to - * @reg: The register to write - * @value: The value to write to the register - */ -static inline void -ks8695_writereg(struct ks8695_priv *ksp, int reg, u32 value) -{ - writel(value, ksp->io_regs + reg); -} - -/* Utility functions */ - -/** - * ks8695_port_type - Retrieve port-type as user-friendly string - * @ksp: The device to return the type for - * - * Returns a string indicating which of the WAN, LAN or HPNA - * ports this device is likely to represent. - */ -static const char * -ks8695_port_type(struct ks8695_priv *ksp) -{ - switch (ksp->dtype) { - case KS8695_DTYPE_LAN: - return "LAN"; - case KS8695_DTYPE_WAN: - return "WAN"; - case KS8695_DTYPE_HPNA: - return "HPNA"; - } - - return "UNKNOWN"; -} - -/** - * ks8695_update_mac - Update the MAC registers in the device - * @ksp: The device to update - * - * Updates the MAC registers in the KS8695 device from the address in the - * net_device structure associated with this interface. - */ -static void -ks8695_update_mac(struct ks8695_priv *ksp) -{ - /* Update the HW with the MAC from the net_device */ - struct net_device *ndev = ksp->ndev; - u32 machigh, maclow; - - maclow = ((ndev->dev_addr[2] << 24) | (ndev->dev_addr[3] << 16) | - (ndev->dev_addr[4] << 8) | (ndev->dev_addr[5] << 0)); - machigh = ((ndev->dev_addr[0] << 8) | (ndev->dev_addr[1] << 0)); - - ks8695_writereg(ksp, KS8695_MAL, maclow); - ks8695_writereg(ksp, KS8695_MAH, machigh); - -} - -/** - * ks8695_refill_rxbuffers - Re-fill the RX buffer ring - * @ksp: The device to refill - * - * Iterates the RX ring of the device looking for empty slots. - * For each empty slot, we allocate and map a new SKB and give it - * to the hardware. - * This can be called from interrupt context safely. - */ -static void -ks8695_refill_rxbuffers(struct ks8695_priv *ksp) -{ - /* Run around the RX ring, filling in any missing sk_buff's */ - int buff_n; - - for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) { - if (!ksp->rx_buffers[buff_n].skb) { - struct sk_buff *skb = - netdev_alloc_skb(ksp->ndev, MAX_RXBUF_SIZE); - dma_addr_t mapping; - - ksp->rx_buffers[buff_n].skb = skb; - if (skb == NULL) { - /* Failed to allocate one, perhaps - * we'll try again later. - */ - break; - } - - mapping = dma_map_single(ksp->dev, skb->data, - MAX_RXBUF_SIZE, - DMA_FROM_DEVICE); - if (unlikely(dma_mapping_error(ksp->dev, mapping))) { - /* Failed to DMA map this SKB, try later */ - dev_kfree_skb_irq(skb); - ksp->rx_buffers[buff_n].skb = NULL; - break; - } - ksp->rx_buffers[buff_n].dma_ptr = mapping; - ksp->rx_buffers[buff_n].length = MAX_RXBUF_SIZE; - - /* Record this into the DMA ring */ - ksp->rx_ring[buff_n].data_ptr = cpu_to_le32(mapping); - ksp->rx_ring[buff_n].length = - cpu_to_le32(MAX_RXBUF_SIZE); - - wmb(); - - /* And give ownership over to the hardware */ - ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN); - } - } -} - -/* Maximum number of multicast addresses which the KS8695 HW supports */ -#define KS8695_NR_ADDRESSES 16 - -/** - * ks8695_init_partial_multicast - Init the mcast addr registers - * @ksp: The device to initialise - * @addr: The multicast address list to use - * @nr_addr: The number of addresses in the list - * - * This routine is a helper for ks8695_set_multicast - it writes - * the additional-address registers in the KS8695 ethernet device - * and cleans up any others left behind. - */ -static void -ks8695_init_partial_multicast(struct ks8695_priv *ksp, - struct net_device *ndev) -{ - u32 low, high; - int i; - struct netdev_hw_addr *ha; - - i = 0; - netdev_for_each_mc_addr(ha, ndev) { - /* Ran out of space in chip? */ - BUG_ON(i == KS8695_NR_ADDRESSES); - - low = (ha->addr[2] << 24) | (ha->addr[3] << 16) | - (ha->addr[4] << 8) | (ha->addr[5]); - high = (ha->addr[0] << 8) | (ha->addr[1]); - - ks8695_writereg(ksp, KS8695_AAL_(i), low); - ks8695_writereg(ksp, KS8695_AAH_(i), AAH_E | high); - i++; - } - - /* Clear the remaining Additional Station Addresses */ - for (; i < KS8695_NR_ADDRESSES; i++) { - ks8695_writereg(ksp, KS8695_AAL_(i), 0); - ks8695_writereg(ksp, KS8695_AAH_(i), 0); - } -} - -/* Interrupt handling */ - -/** - * ks8695_tx_irq - Transmit IRQ handler - * @irq: The IRQ which went off (ignored) - * @dev_id: The net_device for the interrupt - * - * Process the TX ring, clearing out any transmitted slots. - * Allows the net_device to pass us new packets once slots are - * freed. - */ -static irqreturn_t -ks8695_tx_irq(int irq, void *dev_id) -{ - struct net_device *ndev = (struct net_device *)dev_id; - struct ks8695_priv *ksp = netdev_priv(ndev); - int buff_n; - - for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) { - if (ksp->tx_buffers[buff_n].skb && - !(ksp->tx_ring[buff_n].owner & cpu_to_le32(TDES_OWN))) { - rmb(); - /* An SKB which is not owned by HW is present */ - /* Update the stats for the net_device */ - ndev->stats.tx_packets++; - ndev->stats.tx_bytes += ksp->tx_buffers[buff_n].length; - - /* Free the packet from the ring */ - ksp->tx_ring[buff_n].data_ptr = 0; - - /* Free the sk_buff */ - dma_unmap_single(ksp->dev, - ksp->tx_buffers[buff_n].dma_ptr, - ksp->tx_buffers[buff_n].length, - DMA_TO_DEVICE); - dev_consume_skb_irq(ksp->tx_buffers[buff_n].skb); - ksp->tx_buffers[buff_n].skb = NULL; - ksp->tx_ring_used--; - } - } - - netif_wake_queue(ndev); - - return IRQ_HANDLED; -} - -/** - * ks8695_get_rx_enable_bit - Get rx interrupt enable/status bit - * @ksp: Private data for the KS8695 Ethernet - * - * For KS8695 document: - * Interrupt Enable Register (offset 0xE204) - * Bit29 : WAN MAC Receive Interrupt Enable - * Bit16 : LAN MAC Receive Interrupt Enable - * Interrupt Status Register (Offset 0xF208) - * Bit29: WAN MAC Receive Status - * Bit16: LAN MAC Receive Status - * So, this Rx interrupt enable/status bit number is equal - * as Rx IRQ number. - */ -static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp) -{ - return ksp->rx_irq; -} - -/** - * ks8695_rx_irq - Receive IRQ handler - * @irq: The IRQ which went off (ignored) - * @dev_id: The net_device for the interrupt - * - * Inform NAPI that packet reception needs to be scheduled - */ - -static irqreturn_t -ks8695_rx_irq(int irq, void *dev_id) -{ - struct net_device *ndev = (struct net_device *)dev_id; - struct ks8695_priv *ksp = netdev_priv(ndev); - - spin_lock(&ksp->rx_lock); - - if (napi_schedule_prep(&ksp->napi)) { - unsigned long status = readl(KS8695_IRQ_VA + KS8695_INTEN); - unsigned long mask_bit = 1 << ks8695_get_rx_enable_bit(ksp); - /*disable rx interrupt*/ - status &= ~mask_bit; - writel(status , KS8695_IRQ_VA + KS8695_INTEN); - __napi_schedule(&ksp->napi); - } - - spin_unlock(&ksp->rx_lock); - return IRQ_HANDLED; -} - -/** - * ks8695_rx - Receive packets called by NAPI poll method - * @ksp: Private data for the KS8695 Ethernet - * @budget: Number of packets allowed to process - */ -static int ks8695_rx(struct ks8695_priv *ksp, int budget) -{ - struct net_device *ndev = ksp->ndev; - struct sk_buff *skb; - int buff_n; - u32 flags; - int pktlen; - int received = 0; - - buff_n = ksp->next_rx_desc_read; - while (received < budget - && ksp->rx_buffers[buff_n].skb - && (!(ksp->rx_ring[buff_n].status & - cpu_to_le32(RDES_OWN)))) { - rmb(); - flags = le32_to_cpu(ksp->rx_ring[buff_n].status); - - /* Found an SKB which we own, this means we - * received a packet - */ - if ((flags & (RDES_FS | RDES_LS)) != - (RDES_FS | RDES_LS)) { - /* This packet is not the first and - * the last segment. Therefore it is - * a "spanning" packet and we can't - * handle it - */ - goto rx_failure; - } - - if (flags & (RDES_ES | RDES_RE)) { - /* It's an error packet */ - ndev->stats.rx_errors++; - if (flags & RDES_TL) - ndev->stats.rx_length_errors++; - if (flags & RDES_RF) - ndev->stats.rx_length_errors++; - if (flags & RDES_CE) - ndev->stats.rx_crc_errors++; - if (flags & RDES_RE) - ndev->stats.rx_missed_errors++; - - goto rx_failure; - } - - pktlen = flags & RDES_FLEN; - pktlen -= 4; /* Drop the CRC */ - - /* Retrieve the sk_buff */ - skb = ksp->rx_buffers[buff_n].skb; - - /* Clear it from the ring */ - ksp->rx_buffers[buff_n].skb = NULL; - ksp->rx_ring[buff_n].data_ptr = 0; - - /* Unmap the SKB */ - dma_unmap_single(ksp->dev, - ksp->rx_buffers[buff_n].dma_ptr, - ksp->rx_buffers[buff_n].length, - DMA_FROM_DEVICE); - - /* Relinquish the SKB to the network layer */ - skb_put(skb, pktlen); - skb->protocol = eth_type_trans(skb, ndev); - napi_gro_receive(&ksp->napi, skb); - - /* Record stats */ - ndev->stats.rx_packets++; - ndev->stats.rx_bytes += pktlen; - goto rx_finished; - -rx_failure: - /* This ring entry is an error, but we can - * re-use the skb - */ - /* Give the ring entry back to the hardware */ - ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN); -rx_finished: - received++; - buff_n = (buff_n + 1) & MAX_RX_DESC_MASK; - } - - /* And note which RX descriptor we last did */ - ksp->next_rx_desc_read = buff_n; - - /* And refill the buffers */ - ks8695_refill_rxbuffers(ksp); - - /* Kick the RX DMA engine, in case it became suspended */ - ks8695_writereg(ksp, KS8695_DRSC, 0); - - return received; -} - - -/** - * ks8695_poll - Receive packet by NAPI poll method - * @ksp: Private data for the KS8695 Ethernet - * @budget: The remaining number packets for network subsystem - * - * Invoked by the network core when it requests for new - * packets from the driver - */ -static int ks8695_poll(struct napi_struct *napi, int budget) -{ - struct ks8695_priv *ksp = container_of(napi, struct ks8695_priv, napi); - unsigned long isr = readl(KS8695_IRQ_VA + KS8695_INTEN); - unsigned long mask_bit = 1 << ks8695_get_rx_enable_bit(ksp); - int work_done; - - work_done = ks8695_rx(ksp, budget); - - if (work_done < budget && napi_complete_done(napi, work_done)) { - unsigned long flags; - - spin_lock_irqsave(&ksp->rx_lock, flags); - /* enable rx interrupt */ - writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN); - spin_unlock_irqrestore(&ksp->rx_lock, flags); - } - return work_done; -} - -/** - * ks8695_link_irq - Link change IRQ handler - * @irq: The IRQ which went off (ignored) - * @dev_id: The net_device for the interrupt - * - * The WAN interface can generate an IRQ when the link changes, - * report this to the net layer and the user. - */ -static irqreturn_t -ks8695_link_irq(int irq, void *dev_id) -{ - struct net_device *ndev = (struct net_device *)dev_id; - struct ks8695_priv *ksp = netdev_priv(ndev); - u32 ctrl; - - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - if (ctrl & WMC_WLS) { - netif_carrier_on(ndev); - if (netif_msg_link(ksp)) - dev_info(ksp->dev, - "%s: Link is now up (10%sMbps/%s-duplex)\n", - ndev->name, - (ctrl & WMC_WSS) ? "0" : "", - (ctrl & WMC_WDS) ? "Full" : "Half"); - } else { - netif_carrier_off(ndev); - if (netif_msg_link(ksp)) - dev_info(ksp->dev, "%s: Link is now down.\n", - ndev->name); - } - - return IRQ_HANDLED; -} - - -/* KS8695 Device functions */ - -/** - * ks8695_reset - Reset a KS8695 ethernet interface - * @ksp: The interface to reset - * - * Perform an engine reset of the interface and re-program it - * with sensible defaults. - */ -static void -ks8695_reset(struct ks8695_priv *ksp) -{ - int reset_timeout = watchdog; - /* Issue the reset via the TX DMA control register */ - ks8695_writereg(ksp, KS8695_DTXC, DTXC_TRST); - while (reset_timeout--) { - if (!(ks8695_readreg(ksp, KS8695_DTXC) & DTXC_TRST)) - break; - msleep(1); - } - - if (reset_timeout < 0) { - dev_crit(ksp->dev, - "Timeout waiting for DMA engines to reset\n"); - /* And blithely carry on */ - } - - /* Definitely wait long enough before attempting to program - * the engines - */ - msleep(10); - - /* RX: unicast and broadcast */ - ks8695_writereg(ksp, KS8695_DRXC, DRXC_RU | DRXC_RB); - /* TX: pad and add CRC */ - ks8695_writereg(ksp, KS8695_DTXC, DTXC_TEP | DTXC_TAC); -} - -/** - * ks8695_shutdown - Shut down a KS8695 ethernet interface - * @ksp: The interface to shut down - * - * This disables packet RX/TX, cleans up IRQs, drains the rings, - * and basically places the interface into a clean shutdown - * state. - */ -static void -ks8695_shutdown(struct ks8695_priv *ksp) -{ - u32 ctrl; - int buff_n; - - /* Disable packet transmission */ - ctrl = ks8695_readreg(ksp, KS8695_DTXC); - ks8695_writereg(ksp, KS8695_DTXC, ctrl & ~DTXC_TE); - - /* Disable packet reception */ - ctrl = ks8695_readreg(ksp, KS8695_DRXC); - ks8695_writereg(ksp, KS8695_DRXC, ctrl & ~DRXC_RE); - - /* Release the IRQs */ - free_irq(ksp->rx_irq, ksp->ndev); - free_irq(ksp->tx_irq, ksp->ndev); - if (ksp->link_irq != -1) - free_irq(ksp->link_irq, ksp->ndev); - - /* Throw away any pending TX packets */ - for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) { - if (ksp->tx_buffers[buff_n].skb) { - /* Remove this SKB from the TX ring */ - ksp->tx_ring[buff_n].owner = 0; - ksp->tx_ring[buff_n].status = 0; - ksp->tx_ring[buff_n].data_ptr = 0; - - /* Unmap and bin this SKB */ - dma_unmap_single(ksp->dev, - ksp->tx_buffers[buff_n].dma_ptr, - ksp->tx_buffers[buff_n].length, - DMA_TO_DEVICE); - dev_kfree_skb_irq(ksp->tx_buffers[buff_n].skb); - ksp->tx_buffers[buff_n].skb = NULL; - } - } - - /* Purge the RX buffers */ - for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) { - if (ksp->rx_buffers[buff_n].skb) { - /* Remove the SKB from the RX ring */ - ksp->rx_ring[buff_n].status = 0; - ksp->rx_ring[buff_n].data_ptr = 0; - - /* Unmap and bin the SKB */ - dma_unmap_single(ksp->dev, - ksp->rx_buffers[buff_n].dma_ptr, - ksp->rx_buffers[buff_n].length, - DMA_FROM_DEVICE); - dev_kfree_skb_irq(ksp->rx_buffers[buff_n].skb); - ksp->rx_buffers[buff_n].skb = NULL; - } - } -} - - -/** - * ks8695_setup_irq - IRQ setup helper function - * @irq: The IRQ number to claim - * @irq_name: The name to give the IRQ claimant - * @handler: The function to call to handle the IRQ - * @ndev: The net_device to pass in as the dev_id argument to the handler - * - * Return 0 on success. - */ -static int -ks8695_setup_irq(int irq, const char *irq_name, - irq_handler_t handler, struct net_device *ndev) -{ - int ret; - - ret = request_irq(irq, handler, IRQF_SHARED, irq_name, ndev); - - if (ret) { - dev_err(&ndev->dev, "failure to request IRQ %d\n", irq); - return ret; - } - - return 0; -} - -/** - * ks8695_init_net - Initialise a KS8695 ethernet interface - * @ksp: The interface to initialise - * - * This routine fills the RX ring, initialises the DMA engines, - * allocates the IRQs and then starts the packet TX and RX - * engines. - */ -static int -ks8695_init_net(struct ks8695_priv *ksp) -{ - int ret; - u32 ctrl; - - ks8695_refill_rxbuffers(ksp); - - /* Initialise the DMA engines */ - ks8695_writereg(ksp, KS8695_RDLB, (u32) ksp->rx_ring_dma); - ks8695_writereg(ksp, KS8695_TDLB, (u32) ksp->tx_ring_dma); - - /* Request the IRQs */ - ret = ks8695_setup_irq(ksp->rx_irq, ksp->rx_irq_name, - ks8695_rx_irq, ksp->ndev); - if (ret) - return ret; - ret = ks8695_setup_irq(ksp->tx_irq, ksp->tx_irq_name, - ks8695_tx_irq, ksp->ndev); - if (ret) - return ret; - if (ksp->link_irq != -1) { - ret = ks8695_setup_irq(ksp->link_irq, ksp->link_irq_name, - ks8695_link_irq, ksp->ndev); - if (ret) - return ret; - } - - /* Set up the ring indices */ - ksp->next_rx_desc_read = 0; - ksp->tx_ring_next_slot = 0; - ksp->tx_ring_used = 0; - - /* Bring up transmission */ - ctrl = ks8695_readreg(ksp, KS8695_DTXC); - /* Enable packet transmission */ - ks8695_writereg(ksp, KS8695_DTXC, ctrl | DTXC_TE); - - /* Bring up the reception */ - ctrl = ks8695_readreg(ksp, KS8695_DRXC); - /* Enable packet reception */ - ks8695_writereg(ksp, KS8695_DRXC, ctrl | DRXC_RE); - /* And start the DMA engine */ - ks8695_writereg(ksp, KS8695_DRSC, 0); - - /* All done */ - return 0; -} - -/** - * ks8695_release_device - HW resource release for KS8695 e-net - * @ksp: The device to be freed - * - * This unallocates io memory regions, dma-coherent regions etc - * which were allocated in ks8695_probe. - */ -static void -ks8695_release_device(struct ks8695_priv *ksp) -{ - /* Unmap the registers */ - iounmap(ksp->io_regs); - if (ksp->phyiface_regs) - iounmap(ksp->phyiface_regs); - - /* And release the request */ - release_resource(ksp->regs_req); - kfree(ksp->regs_req); - if (ksp->phyiface_req) { - release_resource(ksp->phyiface_req); - kfree(ksp->phyiface_req); - } - - /* Free the ring buffers */ - dma_free_coherent(ksp->dev, RING_DMA_SIZE, - ksp->ring_base, ksp->ring_base_dma); -} - -/* Ethtool support */ - -/** - * ks8695_get_msglevel - Get the messages enabled for emission - * @ndev: The network device to read from - */ -static u32 -ks8695_get_msglevel(struct net_device *ndev) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - - return ksp->msg_enable; -} - -/** - * ks8695_set_msglevel - Set the messages enabled for emission - * @ndev: The network device to configure - * @value: The messages to set for emission - */ -static void -ks8695_set_msglevel(struct net_device *ndev, u32 value) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - - ksp->msg_enable = value; -} - -/** - * ks8695_wan_get_link_ksettings - Get device-specific settings. - * @ndev: The network device to read settings from - * @cmd: The ethtool structure to read into - */ -static int -ks8695_wan_get_link_ksettings(struct net_device *ndev, - struct ethtool_link_ksettings *cmd) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - u32 ctrl; - u32 supported, advertising; - - /* All ports on the KS8695 support these... */ - supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | - SUPPORTED_TP | SUPPORTED_MII); - - advertising = ADVERTISED_TP | ADVERTISED_MII; - cmd->base.port = PORT_MII; - supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause); - cmd->base.phy_address = 0; - - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - if ((ctrl & WMC_WAND) == 0) { - /* auto-negotiation is enabled */ - advertising |= ADVERTISED_Autoneg; - if (ctrl & WMC_WANA100F) - advertising |= ADVERTISED_100baseT_Full; - if (ctrl & WMC_WANA100H) - advertising |= ADVERTISED_100baseT_Half; - if (ctrl & WMC_WANA10F) - advertising |= ADVERTISED_10baseT_Full; - if (ctrl & WMC_WANA10H) - advertising |= ADVERTISED_10baseT_Half; - if (ctrl & WMC_WANAP) - advertising |= ADVERTISED_Pause; - cmd->base.autoneg = AUTONEG_ENABLE; - - cmd->base.speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10; - cmd->base.duplex = (ctrl & WMC_WDS) ? - DUPLEX_FULL : DUPLEX_HALF; - } else { - /* auto-negotiation is disabled */ - cmd->base.autoneg = AUTONEG_DISABLE; - - cmd->base.speed = (ctrl & WMC_WANF100) ? - SPEED_100 : SPEED_10; - cmd->base.duplex = (ctrl & WMC_WANFF) ? - DUPLEX_FULL : DUPLEX_HALF; - } - - ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, - supported); - ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, - advertising); - - return 0; -} - -/** - * ks8695_wan_set_link_ksettings - Set device-specific settings. - * @ndev: The network device to configure - * @cmd: The settings to configure - */ -static int -ks8695_wan_set_link_ksettings(struct net_device *ndev, - const struct ethtool_link_ksettings *cmd) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - u32 ctrl; - u32 advertising; - - ethtool_convert_link_mode_to_legacy_u32(&advertising, - cmd->link_modes.advertising); - - if ((cmd->base.speed != SPEED_10) && (cmd->base.speed != SPEED_100)) - return -EINVAL; - if ((cmd->base.duplex != DUPLEX_HALF) && - (cmd->base.duplex != DUPLEX_FULL)) - return -EINVAL; - if (cmd->base.port != PORT_MII) - return -EINVAL; - if ((cmd->base.autoneg != AUTONEG_DISABLE) && - (cmd->base.autoneg != AUTONEG_ENABLE)) - return -EINVAL; - - if (cmd->base.autoneg == AUTONEG_ENABLE) { - if ((advertising & (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full)) == 0) - return -EINVAL; - - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H | - WMC_WANA10F | WMC_WANA10H); - if (advertising & ADVERTISED_100baseT_Full) - ctrl |= WMC_WANA100F; - if (advertising & ADVERTISED_100baseT_Half) - ctrl |= WMC_WANA100H; - if (advertising & ADVERTISED_10baseT_Full) - ctrl |= WMC_WANA10F; - if (advertising & ADVERTISED_10baseT_Half) - ctrl |= WMC_WANA10H; - - /* force a re-negotiation */ - ctrl |= WMC_WANR; - writel(ctrl, ksp->phyiface_regs + KS8695_WMC); - } else { - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - /* disable auto-negotiation */ - ctrl |= WMC_WAND; - ctrl &= ~(WMC_WANF100 | WMC_WANFF); - - if (cmd->base.speed == SPEED_100) - ctrl |= WMC_WANF100; - if (cmd->base.duplex == DUPLEX_FULL) - ctrl |= WMC_WANFF; - - writel(ctrl, ksp->phyiface_regs + KS8695_WMC); - } - - return 0; -} - -/** - * ks8695_wan_nwayreset - Restart the autonegotiation on the port. - * @ndev: The network device to restart autoneotiation on - */ -static int -ks8695_wan_nwayreset(struct net_device *ndev) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - u32 ctrl; - - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - if ((ctrl & WMC_WAND) == 0) - writel(ctrl | WMC_WANR, - ksp->phyiface_regs + KS8695_WMC); - else - /* auto-negotiation not enabled */ - return -EINVAL; - - return 0; -} - -/** - * ks8695_wan_get_pause - Retrieve network pause/flow-control advertising - * @ndev: The device to retrieve settings from - * @param: The structure to fill out with the information - */ -static void -ks8695_wan_get_pause(struct net_device *ndev, struct ethtool_pauseparam *param) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - u32 ctrl; - - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - /* advertise Pause */ - param->autoneg = (ctrl & WMC_WANAP); - - /* current Rx Flow-control */ - ctrl = ks8695_readreg(ksp, KS8695_DRXC); - param->rx_pause = (ctrl & DRXC_RFCE); - - /* current Tx Flow-control */ - ctrl = ks8695_readreg(ksp, KS8695_DTXC); - param->tx_pause = (ctrl & DTXC_TFCE); -} - -/** - * ks8695_get_drvinfo - Retrieve driver information - * @ndev: The network device to retrieve info about - * @info: The info structure to fill out. - */ -static void -ks8695_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, MODULENAME, sizeof(info->driver)); - strlcpy(info->version, MODULEVERSION, sizeof(info->version)); - strlcpy(info->bus_info, dev_name(ndev->dev.parent), - sizeof(info->bus_info)); -} - -static const struct ethtool_ops ks8695_ethtool_ops = { - .get_msglevel = ks8695_get_msglevel, - .set_msglevel = ks8695_set_msglevel, - .get_drvinfo = ks8695_get_drvinfo, -}; - -static const struct ethtool_ops ks8695_wan_ethtool_ops = { - .get_msglevel = ks8695_get_msglevel, - .set_msglevel = ks8695_set_msglevel, - .nway_reset = ks8695_wan_nwayreset, - .get_link = ethtool_op_get_link, - .get_pauseparam = ks8695_wan_get_pause, - .get_drvinfo = ks8695_get_drvinfo, - .get_link_ksettings = ks8695_wan_get_link_ksettings, - .set_link_ksettings = ks8695_wan_set_link_ksettings, -}; - -/* Network device interface functions */ - -/** - * ks8695_set_mac - Update MAC in net dev and HW - * @ndev: The network device to update - * @addr: The new MAC address to set - */ -static int -ks8695_set_mac(struct net_device *ndev, void *addr) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - struct sockaddr *address = addr; - - if (!is_valid_ether_addr(address->sa_data)) - return -EADDRNOTAVAIL; - - memcpy(ndev->dev_addr, address->sa_data, ndev->addr_len); - - ks8695_update_mac(ksp); - - dev_dbg(ksp->dev, "%s: Updated MAC address to %pM\n", - ndev->name, ndev->dev_addr); - - return 0; -} - -/** - * ks8695_set_multicast - Set up the multicast behaviour of the interface - * @ndev: The net_device to configure - * - * This routine, called by the net layer, configures promiscuity - * and multicast reception behaviour for the interface. - */ -static void -ks8695_set_multicast(struct net_device *ndev) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - u32 ctrl; - - ctrl = ks8695_readreg(ksp, KS8695_DRXC); - - if (ndev->flags & IFF_PROMISC) { - /* enable promiscuous mode */ - ctrl |= DRXC_RA; - } else if (ndev->flags & ~IFF_PROMISC) { - /* disable promiscuous mode */ - ctrl &= ~DRXC_RA; - } - - if (ndev->flags & IFF_ALLMULTI) { - /* enable all multicast mode */ - ctrl |= DRXC_RM; - } else if (netdev_mc_count(ndev) > KS8695_NR_ADDRESSES) { - /* more specific multicast addresses than can be - * handled in hardware - */ - ctrl |= DRXC_RM; - } else { - /* enable specific multicasts */ - ctrl &= ~DRXC_RM; - ks8695_init_partial_multicast(ksp, ndev); - } - - ks8695_writereg(ksp, KS8695_DRXC, ctrl); -} - -/** - * ks8695_timeout - Handle a network tx/rx timeout. - * @ndev: The net_device which timed out. - * - * A network transaction timed out, reset the device. - */ -static void -ks8695_timeout(struct net_device *ndev) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - - netif_stop_queue(ndev); - ks8695_shutdown(ksp); - - ks8695_reset(ksp); - - ks8695_update_mac(ksp); - - /* We ignore the return from this since it managed to init - * before it probably will be okay to init again. - */ - ks8695_init_net(ksp); - - /* Reconfigure promiscuity etc */ - ks8695_set_multicast(ndev); - - /* And start the TX queue once more */ - netif_start_queue(ndev); -} - -/** - * ks8695_start_xmit - Start a packet transmission - * @skb: The packet to transmit - * @ndev: The network device to send the packet on - * - * This routine, called by the net layer, takes ownership of the - * sk_buff and adds it to the TX ring. It then kicks the TX DMA - * engine to ensure transmission begins. - */ -static netdev_tx_t -ks8695_start_xmit(struct sk_buff *skb, struct net_device *ndev) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - int buff_n; - dma_addr_t dmap; - - spin_lock_irq(&ksp->txq_lock); - - if (ksp->tx_ring_used == MAX_TX_DESC) { - /* Somehow we got entered when we have no room */ - spin_unlock_irq(&ksp->txq_lock); - return NETDEV_TX_BUSY; - } - - buff_n = ksp->tx_ring_next_slot; - - BUG_ON(ksp->tx_buffers[buff_n].skb); - - dmap = dma_map_single(ksp->dev, skb->data, skb->len, DMA_TO_DEVICE); - if (unlikely(dma_mapping_error(ksp->dev, dmap))) { - /* Failed to DMA map this SKB, give it back for now */ - spin_unlock_irq(&ksp->txq_lock); - dev_dbg(ksp->dev, "%s: Could not map DMA memory for "\ - "transmission, trying later\n", ndev->name); - return NETDEV_TX_BUSY; - } - - ksp->tx_buffers[buff_n].dma_ptr = dmap; - /* Mapped okay, store the buffer pointer and length for later */ - ksp->tx_buffers[buff_n].skb = skb; - ksp->tx_buffers[buff_n].length = skb->len; - - /* Fill out the TX descriptor */ - ksp->tx_ring[buff_n].data_ptr = - cpu_to_le32(ksp->tx_buffers[buff_n].dma_ptr); - ksp->tx_ring[buff_n].status = - cpu_to_le32(TDES_IC | TDES_FS | TDES_LS | - (skb->len & TDES_TBS)); - - wmb(); - - /* Hand it over to the hardware */ - ksp->tx_ring[buff_n].owner = cpu_to_le32(TDES_OWN); - - if (++ksp->tx_ring_used == MAX_TX_DESC) - netif_stop_queue(ndev); - - /* Kick the TX DMA in case it decided to go IDLE */ - ks8695_writereg(ksp, KS8695_DTSC, 0); - - /* And update the next ring slot */ - ksp->tx_ring_next_slot = (buff_n + 1) & MAX_TX_DESC_MASK; - - spin_unlock_irq(&ksp->txq_lock); - return NETDEV_TX_OK; -} - -/** - * ks8695_stop - Stop (shutdown) a KS8695 ethernet interface - * @ndev: The net_device to stop - * - * This disables the TX queue and cleans up a KS8695 ethernet - * device. - */ -static int -ks8695_stop(struct net_device *ndev) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - - netif_stop_queue(ndev); - napi_disable(&ksp->napi); - - ks8695_shutdown(ksp); - - return 0; -} - -/** - * ks8695_open - Open (bring up) a KS8695 ethernet interface - * @ndev: The net_device to open - * - * This resets, configures the MAC, initialises the RX ring and - * DMA engines and starts the TX queue for a KS8695 ethernet - * device. - */ -static int -ks8695_open(struct net_device *ndev) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - int ret; - - ks8695_reset(ksp); - - ks8695_update_mac(ksp); - - ret = ks8695_init_net(ksp); - if (ret) { - ks8695_shutdown(ksp); - return ret; - } - - napi_enable(&ksp->napi); - netif_start_queue(ndev); - - return 0; -} - -/* Platform device driver */ - -/** - * ks8695_init_switch - Init LAN switch to known good defaults. - * @ksp: The device to initialise - * - * This initialises the LAN switch in the KS8695 to a known-good - * set of defaults. - */ -static void -ks8695_init_switch(struct ks8695_priv *ksp) -{ - u32 ctrl; - - /* Default value for SEC0 according to datasheet */ - ctrl = 0x40819e00; - - /* LED0 = Speed LED1 = Link/Activity */ - ctrl &= ~(SEC0_LLED1S | SEC0_LLED0S); - ctrl |= (LLED0S_LINK | LLED1S_LINK_ACTIVITY); - - /* Enable Switch */ - ctrl |= SEC0_ENABLE; - - writel(ctrl, ksp->phyiface_regs + KS8695_SEC0); - - /* Defaults for SEC1 */ - writel(0x9400100, ksp->phyiface_regs + KS8695_SEC1); -} - -/** - * ks8695_init_wan_phy - Initialise the WAN PHY to sensible defaults - * @ksp: The device to initialise - * - * This initialises a KS8695's WAN phy to sensible values for - * autonegotiation etc. - */ -static void -ks8695_init_wan_phy(struct ks8695_priv *ksp) -{ - u32 ctrl; - - /* Support auto-negotiation */ - ctrl = (WMC_WANAP | WMC_WANA100F | WMC_WANA100H | - WMC_WANA10F | WMC_WANA10H); - - /* LED0 = Activity , LED1 = Link */ - ctrl |= (WLED0S_ACTIVITY | WLED1S_LINK); - - /* Restart Auto-negotiation */ - ctrl |= WMC_WANR; - - writel(ctrl, ksp->phyiface_regs + KS8695_WMC); - - writel(0, ksp->phyiface_regs + KS8695_WPPM); - writel(0, ksp->phyiface_regs + KS8695_PPS); -} - -static const struct net_device_ops ks8695_netdev_ops = { - .ndo_open = ks8695_open, - .ndo_stop = ks8695_stop, - .ndo_start_xmit = ks8695_start_xmit, - .ndo_tx_timeout = ks8695_timeout, - .ndo_set_mac_address = ks8695_set_mac, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_rx_mode = ks8695_set_multicast, -}; - -/** - * ks8695_probe - Probe and initialise a KS8695 ethernet interface - * @pdev: The platform device to probe - * - * Initialise a KS8695 ethernet device from platform data. - * - * This driver requires at least one IORESOURCE_MEM for the - * registers and two IORESOURCE_IRQ for the RX and TX IRQs - * respectively. It can optionally take an additional - * IORESOURCE_MEM for the switch or phy in the case of the lan or - * wan ports, and an IORESOURCE_IRQ for the link IRQ for the wan - * port. - */ -static int -ks8695_probe(struct platform_device *pdev) -{ - struct ks8695_priv *ksp; - struct net_device *ndev; - struct resource *regs_res, *phyiface_res; - struct resource *rxirq_res, *txirq_res, *linkirq_res; - int ret = 0; - int buff_n; - bool inv_mac_addr = false; - u32 machigh, maclow; - - /* Initialise a net_device */ - ndev = alloc_etherdev(sizeof(struct ks8695_priv)); - if (!ndev) - return -ENOMEM; - - SET_NETDEV_DEV(ndev, &pdev->dev); - - dev_dbg(&pdev->dev, "ks8695_probe() called\n"); - - /* Configure our private structure a little */ - ksp = netdev_priv(ndev); - - ksp->dev = &pdev->dev; - ksp->ndev = ndev; - ksp->msg_enable = NETIF_MSG_LINK; - - /* Retrieve resources */ - regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - phyiface_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - - rxirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - txirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1); - linkirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 2); - - if (!(regs_res && rxirq_res && txirq_res)) { - dev_err(ksp->dev, "insufficient resources\n"); - ret = -ENOENT; - goto failure; - } - - ksp->regs_req = request_mem_region(regs_res->start, - resource_size(regs_res), - pdev->name); - - if (!ksp->regs_req) { - dev_err(ksp->dev, "cannot claim register space\n"); - ret = -EIO; - goto failure; - } - - ksp->io_regs = ioremap(regs_res->start, resource_size(regs_res)); - - if (!ksp->io_regs) { - dev_err(ksp->dev, "failed to ioremap registers\n"); - ret = -EINVAL; - goto failure; - } - - if (phyiface_res) { - ksp->phyiface_req = - request_mem_region(phyiface_res->start, - resource_size(phyiface_res), - phyiface_res->name); - - if (!ksp->phyiface_req) { - dev_err(ksp->dev, - "cannot claim switch register space\n"); - ret = -EIO; - goto failure; - } - - ksp->phyiface_regs = ioremap(phyiface_res->start, - resource_size(phyiface_res)); - - if (!ksp->phyiface_regs) { - dev_err(ksp->dev, - "failed to ioremap switch registers\n"); - ret = -EINVAL; - goto failure; - } - } - - ksp->rx_irq = rxirq_res->start; - ksp->rx_irq_name = rxirq_res->name ? rxirq_res->name : "Ethernet RX"; - ksp->tx_irq = txirq_res->start; - ksp->tx_irq_name = txirq_res->name ? txirq_res->name : "Ethernet TX"; - ksp->link_irq = (linkirq_res ? linkirq_res->start : -1); - ksp->link_irq_name = (linkirq_res && linkirq_res->name) ? - linkirq_res->name : "Ethernet Link"; - - /* driver system setup */ - ndev->netdev_ops = &ks8695_netdev_ops; - ndev->watchdog_timeo = msecs_to_jiffies(watchdog); - - netif_napi_add(ndev, &ksp->napi, ks8695_poll, NAPI_WEIGHT); - - /* Retrieve the default MAC addr from the chip. */ - /* The bootloader should have left it in there for us. */ - - machigh = ks8695_readreg(ksp, KS8695_MAH); - maclow = ks8695_readreg(ksp, KS8695_MAL); - - ndev->dev_addr[0] = (machigh >> 8) & 0xFF; - ndev->dev_addr[1] = machigh & 0xFF; - ndev->dev_addr[2] = (maclow >> 24) & 0xFF; - ndev->dev_addr[3] = (maclow >> 16) & 0xFF; - ndev->dev_addr[4] = (maclow >> 8) & 0xFF; - ndev->dev_addr[5] = maclow & 0xFF; - - if (!is_valid_ether_addr(ndev->dev_addr)) - inv_mac_addr = true; - - /* In order to be efficient memory-wise, we allocate both - * rings in one go. - */ - ksp->ring_base = dma_alloc_coherent(&pdev->dev, RING_DMA_SIZE, - &ksp->ring_base_dma, GFP_KERNEL); - if (!ksp->ring_base) { - ret = -ENOMEM; - goto failure; - } - - /* Specify the TX DMA ring buffer */ - ksp->tx_ring = ksp->ring_base; - ksp->tx_ring_dma = ksp->ring_base_dma; - - /* And initialise the queue's lock */ - spin_lock_init(&ksp->txq_lock); - spin_lock_init(&ksp->rx_lock); - - /* Specify the RX DMA ring buffer */ - ksp->rx_ring = ksp->ring_base + TX_RING_DMA_SIZE; - ksp->rx_ring_dma = ksp->ring_base_dma + TX_RING_DMA_SIZE; - - /* Zero the descriptor rings */ - memset(ksp->tx_ring, 0, TX_RING_DMA_SIZE); - memset(ksp->rx_ring, 0, RX_RING_DMA_SIZE); - - /* Build the rings */ - for (buff_n = 0; buff_n < MAX_TX_DESC; ++buff_n) { - ksp->tx_ring[buff_n].next_desc = - cpu_to_le32(ksp->tx_ring_dma + - (sizeof(struct tx_ring_desc) * - ((buff_n + 1) & MAX_TX_DESC_MASK))); - } - - for (buff_n = 0; buff_n < MAX_RX_DESC; ++buff_n) { - ksp->rx_ring[buff_n].next_desc = - cpu_to_le32(ksp->rx_ring_dma + - (sizeof(struct rx_ring_desc) * - ((buff_n + 1) & MAX_RX_DESC_MASK))); - } - - /* Initialise the port (physically) */ - if (ksp->phyiface_regs && ksp->link_irq == -1) { - ks8695_init_switch(ksp); - ksp->dtype = KS8695_DTYPE_LAN; - ndev->ethtool_ops = &ks8695_ethtool_ops; - } else if (ksp->phyiface_regs && ksp->link_irq != -1) { - ks8695_init_wan_phy(ksp); - ksp->dtype = KS8695_DTYPE_WAN; - ndev->ethtool_ops = &ks8695_wan_ethtool_ops; - } else { - /* No initialisation since HPNA does not have a PHY */ - ksp->dtype = KS8695_DTYPE_HPNA; - ndev->ethtool_ops = &ks8695_ethtool_ops; - } - - /* And bring up the net_device with the net core */ - platform_set_drvdata(pdev, ndev); - ret = register_netdev(ndev); - - if (ret == 0) { - if (inv_mac_addr) - dev_warn(ksp->dev, "%s: Invalid ethernet MAC address. Please set using ip\n", - ndev->name); - dev_info(ksp->dev, "ks8695 ethernet (%s) MAC: %pM\n", - ks8695_port_type(ksp), ndev->dev_addr); - } else { - /* Report the failure to register the net_device */ - dev_err(ksp->dev, "ks8695net: failed to register netdev.\n"); - goto failure; - } - - /* All is well */ - return 0; - - /* Error exit path */ -failure: - ks8695_release_device(ksp); - free_netdev(ndev); - - return ret; -} - -/** - * ks8695_drv_suspend - Suspend a KS8695 ethernet platform device. - * @pdev: The device to suspend - * @state: The suspend state - * - * This routine detaches and shuts down a KS8695 ethernet device. - */ -static int -ks8695_drv_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct net_device *ndev = platform_get_drvdata(pdev); - struct ks8695_priv *ksp = netdev_priv(ndev); - - ksp->in_suspend = 1; - - if (netif_running(ndev)) { - netif_device_detach(ndev); - ks8695_shutdown(ksp); - } - - return 0; -} - -/** - * ks8695_drv_resume - Resume a KS8695 ethernet platform device. - * @pdev: The device to resume - * - * This routine re-initialises and re-attaches a KS8695 ethernet - * device. - */ -static int -ks8695_drv_resume(struct platform_device *pdev) -{ - struct net_device *ndev = platform_get_drvdata(pdev); - struct ks8695_priv *ksp = netdev_priv(ndev); - - if (netif_running(ndev)) { - ks8695_reset(ksp); - ks8695_init_net(ksp); - ks8695_set_multicast(ndev); - netif_device_attach(ndev); - } - - ksp->in_suspend = 0; - - return 0; -} - -/** - * ks8695_drv_remove - Remove a KS8695 net device on driver unload. - * @pdev: The platform device to remove - * - * This unregisters and releases a KS8695 ethernet device. - */ -static int -ks8695_drv_remove(struct platform_device *pdev) -{ - struct net_device *ndev = platform_get_drvdata(pdev); - struct ks8695_priv *ksp = netdev_priv(ndev); - - netif_napi_del(&ksp->napi); - - unregister_netdev(ndev); - ks8695_release_device(ksp); - free_netdev(ndev); - - dev_dbg(&pdev->dev, "released and freed device\n"); - return 0; -} - -static struct platform_driver ks8695_driver = { - .driver = { - .name = MODULENAME, - }, - .probe = ks8695_probe, - .remove = ks8695_drv_remove, - .suspend = ks8695_drv_suspend, - .resume = ks8695_drv_resume, -}; - -module_platform_driver(ks8695_driver); - -MODULE_AUTHOR("Simtec Electronics"); -MODULE_DESCRIPTION("Micrel KS8695 (Centaur) Ethernet driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" MODULENAME); - -module_param(watchdog, int, 0400); -MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); diff --git a/drivers/net/ethernet/micrel/ks8695net.h b/drivers/net/ethernet/micrel/ks8695net.h deleted file mode 100644 index b18fad4ad5fd..000000000000 --- a/drivers/net/ethernet/micrel/ks8695net.h +++ /dev/null @@ -1,108 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Micrel KS8695 (Centaur) Ethernet. - * - * Copyright 2008 Simtec Electronics - * Daniel Silverstone <dsilvers@simtec.co.uk> - * Vincent Sanders <vince@simtec.co.uk> - */ - -#ifndef KS8695NET_H -#define KS8695NET_H - -/* Receive descriptor flags */ -#define RDES_OWN (1 << 31) /* Ownership */ -#define RDES_FS (1 << 30) /* First Descriptor */ -#define RDES_LS (1 << 29) /* Last Descriptor */ -#define RDES_IPE (1 << 28) /* IP Checksum error */ -#define RDES_TCPE (1 << 27) /* TCP Checksum error */ -#define RDES_UDPE (1 << 26) /* UDP Checksum error */ -#define RDES_ES (1 << 25) /* Error summary */ -#define RDES_MF (1 << 24) /* Multicast Frame */ -#define RDES_RE (1 << 19) /* MII Error reported */ -#define RDES_TL (1 << 18) /* Frame too Long */ -#define RDES_RF (1 << 17) /* Runt Frame */ -#define RDES_CE (1 << 16) /* CRC error */ -#define RDES_FT (1 << 15) /* Frame Type */ -#define RDES_FLEN (0x7ff) /* Frame Length */ - -#define RDES_RER (1 << 25) /* Receive End of Ring */ -#define RDES_RBS (0x7ff) /* Receive Buffer Size */ - -/* Transmit descriptor flags */ - -#define TDES_OWN (1 << 31) /* Ownership */ - -#define TDES_IC (1 << 31) /* Interrupt on Completion */ -#define TDES_FS (1 << 30) /* First Segment */ -#define TDES_LS (1 << 29) /* Last Segment */ -#define TDES_IPCKG (1 << 28) /* IP Checksum generate */ -#define TDES_TCPCKG (1 << 27) /* TCP Checksum generate */ -#define TDES_UDPCKG (1 << 26) /* UDP Checksum generate */ -#define TDES_TER (1 << 25) /* Transmit End of Ring */ -#define TDES_TBS (0x7ff) /* Transmit Buffer Size */ - -/* - * Network controller register offsets - */ -#define KS8695_DTXC (0x00) /* DMA Transmit Control */ -#define KS8695_DRXC (0x04) /* DMA Receive Control */ -#define KS8695_DTSC (0x08) /* DMA Transmit Start Command */ -#define KS8695_DRSC (0x0c) /* DMA Receive Start Command */ -#define KS8695_TDLB (0x10) /* Transmit Descriptor List - * Base Address - */ -#define KS8695_RDLB (0x14) /* Receive Descriptor List - * Base Address - */ -#define KS8695_MAL (0x18) /* MAC Station Address Low */ -#define KS8695_MAH (0x1c) /* MAC Station Address High */ -#define KS8695_AAL_(n) (0x80 + ((n)*8)) /* MAC Additional - * Station Address - * (0..15) Low - */ -#define KS8695_AAH_(n) (0x84 + ((n)*8)) /* MAC Additional - * Station Address - * (0..15) High - */ - - -/* DMA Transmit Control Register */ -#define DTXC_TRST (1 << 31) /* Soft Reset */ -#define DTXC_TBS (0x3f << 24) /* Transmit Burst Size */ -#define DTXC_TUCG (1 << 18) /* Transmit UDP - * Checksum Generate - */ -#define DTXC_TTCG (1 << 17) /* Transmit TCP - * Checksum Generate - */ -#define DTXC_TICG (1 << 16) /* Transmit IP - * Checksum Generate - */ -#define DTXC_TFCE (1 << 9) /* Transmit Flow - * Control Enable - */ -#define DTXC_TLB (1 << 8) /* Loopback mode */ -#define DTXC_TEP (1 << 2) /* Transmit Enable Padding */ -#define DTXC_TAC (1 << 1) /* Transmit Add CRC */ -#define DTXC_TE (1 << 0) /* TX Enable */ - -/* DMA Receive Control Register */ -#define DRXC_RBS (0x3f << 24) /* Receive Burst Size */ -#define DRXC_RUCC (1 << 18) /* Receive UDP Checksum check */ -#define DRXC_RTCG (1 << 17) /* Receive TCP Checksum check */ -#define DRXC_RICG (1 << 16) /* Receive IP Checksum check */ -#define DRXC_RFCE (1 << 9) /* Receive Flow Control - * Enable - */ -#define DRXC_RB (1 << 6) /* Receive Broadcast */ -#define DRXC_RM (1 << 5) /* Receive Multicast */ -#define DRXC_RU (1 << 4) /* Receive Unicast */ -#define DRXC_RERR (1 << 3) /* Receive Error Frame */ -#define DRXC_RA (1 << 2) /* Receive All */ -#define DRXC_RE (1 << 0) /* RX Enable */ - -/* Additional Station Address High */ -#define AAH_E (1 << 31) /* Address Enabled */ - -#endif /* KS8695NET_H */ diff --git a/drivers/net/ethernet/nuvoton/Kconfig b/drivers/net/ethernet/nuvoton/Kconfig deleted file mode 100644 index 325e26c549f8..000000000000 --- a/drivers/net/ethernet/nuvoton/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Nuvoton network device configuration -# - -config NET_VENDOR_NUVOTON - bool "Nuvoton devices" - default y - depends on ARM && ARCH_W90X900 - ---help--- - If you have a network (Ethernet) card belonging to this class, say Y. - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about Nuvoton cards. If you say Y, you will be asked - for your specific card in the following questions. - -if NET_VENDOR_NUVOTON - -config W90P910_ETH - tristate "Nuvoton w90p910 Ethernet support" - depends on ARM && ARCH_W90X900 - select PHYLIB - select MII - ---help--- - Say Y here if you want to use built-in Ethernet ports - on w90p910 processor. - -endif # NET_VENDOR_NUVOTON diff --git a/drivers/net/ethernet/nuvoton/Makefile b/drivers/net/ethernet/nuvoton/Makefile deleted file mode 100644 index 66f6e728d54b..000000000000 --- a/drivers/net/ethernet/nuvoton/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the Nuvoton network device drivers. -# - -obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o diff --git a/drivers/net/ethernet/nuvoton/w90p910_ether.c b/drivers/net/ethernet/nuvoton/w90p910_ether.c deleted file mode 100644 index 219b0b863c89..000000000000 --- a/drivers/net/ethernet/nuvoton/w90p910_ether.c +++ /dev/null @@ -1,1080 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2008-2009 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/mii.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/ethtool.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/gfp.h> - -#define DRV_MODULE_NAME "w90p910-emc" -#define DRV_MODULE_VERSION "0.1" - -/* Ethernet MAC Registers */ -#define REG_CAMCMR 0x00 -#define REG_CAMEN 0x04 -#define REG_CAMM_BASE 0x08 -#define REG_CAML_BASE 0x0c -#define REG_TXDLSA 0x88 -#define REG_RXDLSA 0x8C -#define REG_MCMDR 0x90 -#define REG_MIID 0x94 -#define REG_MIIDA 0x98 -#define REG_FFTCR 0x9C -#define REG_TSDR 0xa0 -#define REG_RSDR 0xa4 -#define REG_DMARFC 0xa8 -#define REG_MIEN 0xac -#define REG_MISTA 0xb0 -#define REG_CTXDSA 0xcc -#define REG_CTXBSA 0xd0 -#define REG_CRXDSA 0xd4 -#define REG_CRXBSA 0xd8 - -/* mac controller bit */ -#define MCMDR_RXON 0x01 -#define MCMDR_ACP (0x01 << 3) -#define MCMDR_SPCRC (0x01 << 5) -#define MCMDR_TXON (0x01 << 8) -#define MCMDR_FDUP (0x01 << 18) -#define MCMDR_ENMDC (0x01 << 19) -#define MCMDR_OPMOD (0x01 << 20) -#define SWR (0x01 << 24) - -/* cam command regiser */ -#define CAMCMR_AUP 0x01 -#define CAMCMR_AMP (0x01 << 1) -#define CAMCMR_ABP (0x01 << 2) -#define CAMCMR_CCAM (0x01 << 3) -#define CAMCMR_ECMP (0x01 << 4) -#define CAM0EN 0x01 - -/* mac mii controller bit */ -#define MDCCR (0x0a << 20) -#define PHYAD (0x01 << 8) -#define PHYWR (0x01 << 16) -#define PHYBUSY (0x01 << 17) -#define PHYPRESP (0x01 << 18) -#define CAM_ENTRY_SIZE 0x08 - -/* rx and tx status */ -#define TXDS_TXCP (0x01 << 19) -#define RXDS_CRCE (0x01 << 17) -#define RXDS_PTLE (0x01 << 19) -#define RXDS_RXGD (0x01 << 20) -#define RXDS_ALIE (0x01 << 21) -#define RXDS_RP (0x01 << 22) - -/* mac interrupt status*/ -#define MISTA_EXDEF (0x01 << 19) -#define MISTA_TXBERR (0x01 << 24) -#define MISTA_TDU (0x01 << 23) -#define MISTA_RDU (0x01 << 10) -#define MISTA_RXBERR (0x01 << 11) - -#define ENSTART 0x01 -#define ENRXINTR 0x01 -#define ENRXGD (0x01 << 4) -#define ENRXBERR (0x01 << 11) -#define ENTXINTR (0x01 << 16) -#define ENTXCP (0x01 << 18) -#define ENTXABT (0x01 << 21) -#define ENTXBERR (0x01 << 24) -#define ENMDC (0x01 << 19) -#define PHYBUSY (0x01 << 17) -#define MDCCR_VAL 0xa00000 - -/* rx and tx owner bit */ -#define RX_OWEN_DMA (0x01 << 31) -#define RX_OWEN_CPU (~(0x03 << 30)) -#define TX_OWEN_DMA (0x01 << 31) -#define TX_OWEN_CPU (~(0x01 << 31)) - -/* tx frame desc controller bit */ -#define MACTXINTEN 0x04 -#define CRCMODE 0x02 -#define PADDINGMODE 0x01 - -/* fftcr controller bit */ -#define TXTHD (0x03 << 8) -#define BLENGTH (0x01 << 20) - -/* global setting for driver */ -#define RX_DESC_SIZE 50 -#define TX_DESC_SIZE 10 -#define MAX_RBUFF_SZ 0x600 -#define MAX_TBUFF_SZ 0x600 -#define TX_TIMEOUT (HZ/2) -#define DELAY 1000 -#define CAM0 0x0 - -static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg); - -struct w90p910_rxbd { - unsigned int sl; - unsigned int buffer; - unsigned int reserved; - unsigned int next; -}; - -struct w90p910_txbd { - unsigned int mode; - unsigned int buffer; - unsigned int sl; - unsigned int next; -}; - -struct recv_pdesc { - struct w90p910_rxbd desclist[RX_DESC_SIZE]; - char recv_buf[RX_DESC_SIZE][MAX_RBUFF_SZ]; -}; - -struct tran_pdesc { - struct w90p910_txbd desclist[TX_DESC_SIZE]; - char tran_buf[TX_DESC_SIZE][MAX_TBUFF_SZ]; -}; - -struct w90p910_ether { - struct recv_pdesc *rdesc; - struct tran_pdesc *tdesc; - dma_addr_t rdesc_phys; - dma_addr_t tdesc_phys; - struct platform_device *pdev; - struct resource *res; - struct sk_buff *skb; - struct clk *clk; - struct clk *rmiiclk; - struct mii_if_info mii; - struct timer_list check_timer; - void __iomem *reg; - int rxirq; - int txirq; - unsigned int cur_tx; - unsigned int cur_rx; - unsigned int finish_tx; - unsigned int rx_packets; - unsigned int rx_bytes; - unsigned int start_tx_ptr; - unsigned int start_rx_ptr; - unsigned int linkflag; -}; - -static void update_linkspeed_register(struct net_device *dev, - unsigned int speed, unsigned int duplex) -{ - struct w90p910_ether *ether = netdev_priv(dev); - unsigned int val; - - val = __raw_readl(ether->reg + REG_MCMDR); - - if (speed == SPEED_100) { - /* 100 full/half duplex */ - if (duplex == DUPLEX_FULL) { - val |= (MCMDR_OPMOD | MCMDR_FDUP); - } else { - val |= MCMDR_OPMOD; - val &= ~MCMDR_FDUP; - } - } else { - /* 10 full/half duplex */ - if (duplex == DUPLEX_FULL) { - val |= MCMDR_FDUP; - val &= ~MCMDR_OPMOD; - } else { - val &= ~(MCMDR_FDUP | MCMDR_OPMOD); - } - } - - __raw_writel(val, ether->reg + REG_MCMDR); -} - -static void update_linkspeed(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - struct platform_device *pdev; - unsigned int bmsr, bmcr, lpa, speed, duplex; - - pdev = ether->pdev; - - if (!mii_link_ok(ðer->mii)) { - ether->linkflag = 0x0; - netif_carrier_off(dev); - dev_warn(&pdev->dev, "%s: Link down.\n", dev->name); - return; - } - - if (ether->linkflag == 1) - return; - - bmsr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMSR); - bmcr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMCR); - - if (bmcr & BMCR_ANENABLE) { - if (!(bmsr & BMSR_ANEGCOMPLETE)) - return; - - lpa = w90p910_mdio_read(dev, ether->mii.phy_id, MII_LPA); - - if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) - speed = SPEED_100; - else - speed = SPEED_10; - - if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) - duplex = DUPLEX_FULL; - else - duplex = DUPLEX_HALF; - - } else { - speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10; - duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; - } - - update_linkspeed_register(dev, speed, duplex); - - dev_info(&pdev->dev, "%s: Link now %i-%s\n", dev->name, speed, - (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex"); - ether->linkflag = 0x01; - - netif_carrier_on(dev); -} - -static void w90p910_check_link(struct timer_list *t) -{ - struct w90p910_ether *ether = from_timer(ether, t, check_timer); - struct net_device *dev = ether->mii.dev; - - update_linkspeed(dev); - mod_timer(ðer->check_timer, jiffies + msecs_to_jiffies(1000)); -} - -static void w90p910_write_cam(struct net_device *dev, - unsigned int x, unsigned char *pval) -{ - struct w90p910_ether *ether = netdev_priv(dev); - unsigned int msw, lsw; - - msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3]; - - lsw = (pval[4] << 24) | (pval[5] << 16); - - __raw_writel(lsw, ether->reg + REG_CAML_BASE + x * CAM_ENTRY_SIZE); - __raw_writel(msw, ether->reg + REG_CAMM_BASE + x * CAM_ENTRY_SIZE); -} - -static int w90p910_init_desc(struct net_device *dev) -{ - struct w90p910_ether *ether; - struct w90p910_txbd *tdesc; - struct w90p910_rxbd *rdesc; - struct platform_device *pdev; - unsigned int i; - - ether = netdev_priv(dev); - pdev = ether->pdev; - - ether->tdesc = dma_alloc_coherent(&pdev->dev, sizeof(struct tran_pdesc), - ðer->tdesc_phys, GFP_KERNEL); - if (!ether->tdesc) - return -ENOMEM; - - ether->rdesc = dma_alloc_coherent(&pdev->dev, sizeof(struct recv_pdesc), - ðer->rdesc_phys, GFP_KERNEL); - if (!ether->rdesc) { - dma_free_coherent(&pdev->dev, sizeof(struct tran_pdesc), - ether->tdesc, ether->tdesc_phys); - return -ENOMEM; - } - - for (i = 0; i < TX_DESC_SIZE; i++) { - unsigned int offset; - - tdesc = &(ether->tdesc->desclist[i]); - - if (i == TX_DESC_SIZE - 1) - offset = offsetof(struct tran_pdesc, desclist[0]); - else - offset = offsetof(struct tran_pdesc, desclist[i + 1]); - - tdesc->next = ether->tdesc_phys + offset; - tdesc->buffer = ether->tdesc_phys + - offsetof(struct tran_pdesc, tran_buf[i]); - tdesc->sl = 0; - tdesc->mode = 0; - } - - ether->start_tx_ptr = ether->tdesc_phys; - - for (i = 0; i < RX_DESC_SIZE; i++) { - unsigned int offset; - - rdesc = &(ether->rdesc->desclist[i]); - - if (i == RX_DESC_SIZE - 1) - offset = offsetof(struct recv_pdesc, desclist[0]); - else - offset = offsetof(struct recv_pdesc, desclist[i + 1]); - - rdesc->next = ether->rdesc_phys + offset; - rdesc->sl = RX_OWEN_DMA; - rdesc->buffer = ether->rdesc_phys + - offsetof(struct recv_pdesc, recv_buf[i]); - } - - ether->start_rx_ptr = ether->rdesc_phys; - - return 0; -} - -static void w90p910_set_fifo_threshold(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - unsigned int val; - - val = TXTHD | BLENGTH; - __raw_writel(val, ether->reg + REG_FFTCR); -} - -static void w90p910_return_default_idle(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - unsigned int val; - - val = __raw_readl(ether->reg + REG_MCMDR); - val |= SWR; - __raw_writel(val, ether->reg + REG_MCMDR); -} - -static void w90p910_trigger_rx(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - - __raw_writel(ENSTART, ether->reg + REG_RSDR); -} - -static void w90p910_trigger_tx(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - - __raw_writel(ENSTART, ether->reg + REG_TSDR); -} - -static void w90p910_enable_mac_interrupt(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - unsigned int val; - - val = ENTXINTR | ENRXINTR | ENRXGD | ENTXCP; - val |= ENTXBERR | ENRXBERR | ENTXABT; - - __raw_writel(val, ether->reg + REG_MIEN); -} - -static void w90p910_get_and_clear_int(struct net_device *dev, - unsigned int *val) -{ - struct w90p910_ether *ether = netdev_priv(dev); - - *val = __raw_readl(ether->reg + REG_MISTA); - __raw_writel(*val, ether->reg + REG_MISTA); -} - -static void w90p910_set_global_maccmd(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - unsigned int val; - - val = __raw_readl(ether->reg + REG_MCMDR); - val |= MCMDR_SPCRC | MCMDR_ENMDC | MCMDR_ACP | ENMDC; - __raw_writel(val, ether->reg + REG_MCMDR); -} - -static void w90p910_enable_cam(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - unsigned int val; - - w90p910_write_cam(dev, CAM0, dev->dev_addr); - - val = __raw_readl(ether->reg + REG_CAMEN); - val |= CAM0EN; - __raw_writel(val, ether->reg + REG_CAMEN); -} - -static void w90p910_enable_cam_command(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - unsigned int val; - - val = CAMCMR_ECMP | CAMCMR_ABP | CAMCMR_AMP; - __raw_writel(val, ether->reg + REG_CAMCMR); -} - -static void w90p910_enable_tx(struct net_device *dev, unsigned int enable) -{ - struct w90p910_ether *ether = netdev_priv(dev); - unsigned int val; - - val = __raw_readl(ether->reg + REG_MCMDR); - - if (enable) - val |= MCMDR_TXON; - else - val &= ~MCMDR_TXON; - - __raw_writel(val, ether->reg + REG_MCMDR); -} - -static void w90p910_enable_rx(struct net_device *dev, unsigned int enable) -{ - struct w90p910_ether *ether = netdev_priv(dev); - unsigned int val; - - val = __raw_readl(ether->reg + REG_MCMDR); - - if (enable) - val |= MCMDR_RXON; - else - val &= ~MCMDR_RXON; - - __raw_writel(val, ether->reg + REG_MCMDR); -} - -static void w90p910_set_curdest(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - - __raw_writel(ether->start_rx_ptr, ether->reg + REG_RXDLSA); - __raw_writel(ether->start_tx_ptr, ether->reg + REG_TXDLSA); -} - -static void w90p910_reset_mac(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - - w90p910_enable_tx(dev, 0); - w90p910_enable_rx(dev, 0); - w90p910_set_fifo_threshold(dev); - w90p910_return_default_idle(dev); - - if (!netif_queue_stopped(dev)) - netif_stop_queue(dev); - - w90p910_init_desc(dev); - - netif_trans_update(dev); /* prevent tx timeout */ - ether->cur_tx = 0x0; - ether->finish_tx = 0x0; - ether->cur_rx = 0x0; - - w90p910_set_curdest(dev); - w90p910_enable_cam(dev); - w90p910_enable_cam_command(dev); - w90p910_enable_mac_interrupt(dev); - w90p910_enable_tx(dev, 1); - w90p910_enable_rx(dev, 1); - w90p910_trigger_tx(dev); - w90p910_trigger_rx(dev); - - netif_trans_update(dev); /* prevent tx timeout */ - - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); -} - -static void w90p910_mdio_write(struct net_device *dev, - int phy_id, int reg, int data) -{ - struct w90p910_ether *ether = netdev_priv(dev); - struct platform_device *pdev; - unsigned int val, i; - - pdev = ether->pdev; - - __raw_writel(data, ether->reg + REG_MIID); - - val = (phy_id << 0x08) | reg; - val |= PHYBUSY | PHYWR | MDCCR_VAL; - __raw_writel(val, ether->reg + REG_MIIDA); - - for (i = 0; i < DELAY; i++) { - if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0) - break; - } - - if (i == DELAY) - dev_warn(&pdev->dev, "mdio write timed out\n"); -} - -static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg) -{ - struct w90p910_ether *ether = netdev_priv(dev); - struct platform_device *pdev; - unsigned int val, i, data; - - pdev = ether->pdev; - - val = (phy_id << 0x08) | reg; - val |= PHYBUSY | MDCCR_VAL; - __raw_writel(val, ether->reg + REG_MIIDA); - - for (i = 0; i < DELAY; i++) { - if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0) - break; - } - - if (i == DELAY) { - dev_warn(&pdev->dev, "mdio read timed out\n"); - data = 0xffff; - } else { - data = __raw_readl(ether->reg + REG_MIID); - } - - return data; -} - -static int w90p910_set_mac_address(struct net_device *dev, void *addr) -{ - struct sockaddr *address = addr; - - if (!is_valid_ether_addr(address->sa_data)) - return -EADDRNOTAVAIL; - - memcpy(dev->dev_addr, address->sa_data, dev->addr_len); - w90p910_write_cam(dev, CAM0, dev->dev_addr); - - return 0; -} - -static int w90p910_ether_close(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - struct platform_device *pdev; - - pdev = ether->pdev; - - dma_free_coherent(&pdev->dev, sizeof(struct recv_pdesc), - ether->rdesc, ether->rdesc_phys); - dma_free_coherent(&pdev->dev, sizeof(struct tran_pdesc), - ether->tdesc, ether->tdesc_phys); - - netif_stop_queue(dev); - - del_timer_sync(ðer->check_timer); - clk_disable(ether->rmiiclk); - clk_disable(ether->clk); - - free_irq(ether->txirq, dev); - free_irq(ether->rxirq, dev); - - return 0; -} - -static int w90p910_send_frame(struct net_device *dev, - unsigned char *data, int length) -{ - struct w90p910_ether *ether; - struct w90p910_txbd *txbd; - struct platform_device *pdev; - unsigned char *buffer; - - ether = netdev_priv(dev); - pdev = ether->pdev; - - txbd = ðer->tdesc->desclist[ether->cur_tx]; - buffer = ether->tdesc->tran_buf[ether->cur_tx]; - - if (length > 1514) { - dev_err(&pdev->dev, "send data %d bytes, check it\n", length); - length = 1514; - } - - txbd->sl = length & 0xFFFF; - - memcpy(buffer, data, length); - - txbd->mode = TX_OWEN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN; - - w90p910_enable_tx(dev, 1); - - w90p910_trigger_tx(dev); - - if (++ether->cur_tx >= TX_DESC_SIZE) - ether->cur_tx = 0; - - txbd = ðer->tdesc->desclist[ether->cur_tx]; - - if (txbd->mode & TX_OWEN_DMA) - netif_stop_queue(dev); - - return 0; -} - -static int w90p910_ether_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - - if (!(w90p910_send_frame(dev, skb->data, skb->len))) { - ether->skb = skb; - dev_consume_skb_irq(skb); - return 0; - } - return -EAGAIN; -} - -static irqreturn_t w90p910_tx_interrupt(int irq, void *dev_id) -{ - struct w90p910_ether *ether; - struct w90p910_txbd *txbd; - struct platform_device *pdev; - struct net_device *dev; - unsigned int cur_entry, entry, status; - - dev = dev_id; - ether = netdev_priv(dev); - pdev = ether->pdev; - - w90p910_get_and_clear_int(dev, &status); - - cur_entry = __raw_readl(ether->reg + REG_CTXDSA); - - entry = ether->tdesc_phys + - offsetof(struct tran_pdesc, desclist[ether->finish_tx]); - - while (entry != cur_entry) { - txbd = ðer->tdesc->desclist[ether->finish_tx]; - - if (++ether->finish_tx >= TX_DESC_SIZE) - ether->finish_tx = 0; - - if (txbd->sl & TXDS_TXCP) { - dev->stats.tx_packets++; - dev->stats.tx_bytes += txbd->sl & 0xFFFF; - } else { - dev->stats.tx_errors++; - } - - txbd->sl = 0x0; - txbd->mode = 0x0; - - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); - - entry = ether->tdesc_phys + - offsetof(struct tran_pdesc, desclist[ether->finish_tx]); - } - - if (status & MISTA_EXDEF) { - dev_err(&pdev->dev, "emc defer exceed interrupt\n"); - } else if (status & MISTA_TXBERR) { - dev_err(&pdev->dev, "emc bus error interrupt\n"); - w90p910_reset_mac(dev); - } else if (status & MISTA_TDU) { - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); - } - - return IRQ_HANDLED; -} - -static void netdev_rx(struct net_device *dev) -{ - struct w90p910_ether *ether; - struct w90p910_rxbd *rxbd; - struct platform_device *pdev; - struct sk_buff *skb; - unsigned char *data; - unsigned int length, status, val, entry; - - ether = netdev_priv(dev); - pdev = ether->pdev; - - rxbd = ðer->rdesc->desclist[ether->cur_rx]; - - do { - val = __raw_readl(ether->reg + REG_CRXDSA); - - entry = ether->rdesc_phys + - offsetof(struct recv_pdesc, desclist[ether->cur_rx]); - - if (val == entry) - break; - - status = rxbd->sl; - length = status & 0xFFFF; - - if (status & RXDS_RXGD) { - data = ether->rdesc->recv_buf[ether->cur_rx]; - skb = netdev_alloc_skb(dev, length + 2); - if (!skb) { - dev->stats.rx_dropped++; - return; - } - - skb_reserve(skb, 2); - skb_put(skb, length); - skb_copy_to_linear_data(skb, data, length); - skb->protocol = eth_type_trans(skb, dev); - dev->stats.rx_packets++; - dev->stats.rx_bytes += length; - netif_rx(skb); - } else { - dev->stats.rx_errors++; - - if (status & RXDS_RP) { - dev_err(&pdev->dev, "rx runt err\n"); - dev->stats.rx_length_errors++; - } else if (status & RXDS_CRCE) { - dev_err(&pdev->dev, "rx crc err\n"); - dev->stats.rx_crc_errors++; - } else if (status & RXDS_ALIE) { - dev_err(&pdev->dev, "rx alignment err\n"); - dev->stats.rx_frame_errors++; - } else if (status & RXDS_PTLE) { - dev_err(&pdev->dev, "rx longer err\n"); - dev->stats.rx_over_errors++; - } - } - - rxbd->sl = RX_OWEN_DMA; - rxbd->reserved = 0x0; - - if (++ether->cur_rx >= RX_DESC_SIZE) - ether->cur_rx = 0; - - rxbd = ðer->rdesc->desclist[ether->cur_rx]; - - } while (1); -} - -static irqreturn_t w90p910_rx_interrupt(int irq, void *dev_id) -{ - struct net_device *dev; - struct w90p910_ether *ether; - struct platform_device *pdev; - unsigned int status; - - dev = dev_id; - ether = netdev_priv(dev); - pdev = ether->pdev; - - w90p910_get_and_clear_int(dev, &status); - - if (status & MISTA_RDU) { - netdev_rx(dev); - w90p910_trigger_rx(dev); - - return IRQ_HANDLED; - } else if (status & MISTA_RXBERR) { - dev_err(&pdev->dev, "emc rx bus error\n"); - w90p910_reset_mac(dev); - } - - netdev_rx(dev); - return IRQ_HANDLED; -} - -static int w90p910_ether_open(struct net_device *dev) -{ - struct w90p910_ether *ether; - struct platform_device *pdev; - - ether = netdev_priv(dev); - pdev = ether->pdev; - - w90p910_reset_mac(dev); - w90p910_set_fifo_threshold(dev); - w90p910_set_curdest(dev); - w90p910_enable_cam(dev); - w90p910_enable_cam_command(dev); - w90p910_enable_mac_interrupt(dev); - w90p910_set_global_maccmd(dev); - w90p910_enable_rx(dev, 1); - - clk_enable(ether->rmiiclk); - clk_enable(ether->clk); - - ether->rx_packets = 0x0; - ether->rx_bytes = 0x0; - - if (request_irq(ether->txirq, w90p910_tx_interrupt, - 0x0, pdev->name, dev)) { - dev_err(&pdev->dev, "register irq tx failed\n"); - return -EAGAIN; - } - - if (request_irq(ether->rxirq, w90p910_rx_interrupt, - 0x0, pdev->name, dev)) { - dev_err(&pdev->dev, "register irq rx failed\n"); - free_irq(ether->txirq, dev); - return -EAGAIN; - } - - mod_timer(ðer->check_timer, jiffies + msecs_to_jiffies(1000)); - netif_start_queue(dev); - w90p910_trigger_rx(dev); - - dev_info(&pdev->dev, "%s is OPENED\n", dev->name); - - return 0; -} - -static void w90p910_ether_set_multicast_list(struct net_device *dev) -{ - struct w90p910_ether *ether; - unsigned int rx_mode; - - ether = netdev_priv(dev); - - if (dev->flags & IFF_PROMISC) - rx_mode = CAMCMR_AUP | CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP; - else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) - rx_mode = CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP; - else - rx_mode = CAMCMR_ECMP | CAMCMR_ABP; - __raw_writel(rx_mode, ether->reg + REG_CAMCMR); -} - -static int w90p910_ether_ioctl(struct net_device *dev, - struct ifreq *ifr, int cmd) -{ - struct w90p910_ether *ether = netdev_priv(dev); - struct mii_ioctl_data *data = if_mii(ifr); - - return generic_mii_ioctl(ðer->mii, data, cmd, NULL); -} - -static void w90p910_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, DRV_MODULE_NAME, sizeof(info->driver)); - strlcpy(info->version, DRV_MODULE_VERSION, sizeof(info->version)); -} - -static int w90p910_get_link_ksettings(struct net_device *dev, - struct ethtool_link_ksettings *cmd) -{ - struct w90p910_ether *ether = netdev_priv(dev); - - mii_ethtool_get_link_ksettings(ðer->mii, cmd); - - return 0; -} - -static int w90p910_set_link_ksettings(struct net_device *dev, - const struct ethtool_link_ksettings *cmd) -{ - struct w90p910_ether *ether = netdev_priv(dev); - return mii_ethtool_set_link_ksettings(ðer->mii, cmd); -} - -static int w90p910_nway_reset(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - return mii_nway_restart(ðer->mii); -} - -static u32 w90p910_get_link(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - return mii_link_ok(ðer->mii); -} - -static const struct ethtool_ops w90p910_ether_ethtool_ops = { - .get_drvinfo = w90p910_get_drvinfo, - .nway_reset = w90p910_nway_reset, - .get_link = w90p910_get_link, - .get_link_ksettings = w90p910_get_link_ksettings, - .set_link_ksettings = w90p910_set_link_ksettings, -}; - -static const struct net_device_ops w90p910_ether_netdev_ops = { - .ndo_open = w90p910_ether_open, - .ndo_stop = w90p910_ether_close, - .ndo_start_xmit = w90p910_ether_start_xmit, - .ndo_set_rx_mode = w90p910_ether_set_multicast_list, - .ndo_set_mac_address = w90p910_set_mac_address, - .ndo_do_ioctl = w90p910_ether_ioctl, - .ndo_validate_addr = eth_validate_addr, -}; - -static void get_mac_address(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - struct platform_device *pdev; - char addr[ETH_ALEN]; - - pdev = ether->pdev; - - addr[0] = 0x00; - addr[1] = 0x02; - addr[2] = 0xac; - addr[3] = 0x55; - addr[4] = 0x88; - addr[5] = 0xa8; - - if (is_valid_ether_addr(addr)) - memcpy(dev->dev_addr, &addr, ETH_ALEN); - else - dev_err(&pdev->dev, "invalid mac address\n"); -} - -static int w90p910_ether_setup(struct net_device *dev) -{ - struct w90p910_ether *ether = netdev_priv(dev); - - dev->netdev_ops = &w90p910_ether_netdev_ops; - dev->ethtool_ops = &w90p910_ether_ethtool_ops; - - dev->tx_queue_len = 16; - dev->dma = 0x0; - dev->watchdog_timeo = TX_TIMEOUT; - - get_mac_address(dev); - - ether->cur_tx = 0x0; - ether->cur_rx = 0x0; - ether->finish_tx = 0x0; - ether->linkflag = 0x0; - ether->mii.phy_id = 0x01; - ether->mii.phy_id_mask = 0x1f; - ether->mii.reg_num_mask = 0x1f; - ether->mii.dev = dev; - ether->mii.mdio_read = w90p910_mdio_read; - ether->mii.mdio_write = w90p910_mdio_write; - - timer_setup(ðer->check_timer, w90p910_check_link, 0); - - return 0; -} - -static int w90p910_ether_probe(struct platform_device *pdev) -{ - struct w90p910_ether *ether; - struct net_device *dev; - int error; - - dev = alloc_etherdev(sizeof(struct w90p910_ether)); - if (!dev) - return -ENOMEM; - - ether = netdev_priv(dev); - - ether->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (ether->res == NULL) { - dev_err(&pdev->dev, "failed to get I/O memory\n"); - error = -ENXIO; - goto failed_free; - } - - if (!request_mem_region(ether->res->start, - resource_size(ether->res), pdev->name)) { - dev_err(&pdev->dev, "failed to request I/O memory\n"); - error = -EBUSY; - goto failed_free; - } - - ether->reg = ioremap(ether->res->start, resource_size(ether->res)); - if (ether->reg == NULL) { - dev_err(&pdev->dev, "failed to remap I/O memory\n"); - error = -ENXIO; - goto failed_free_mem; - } - - ether->txirq = platform_get_irq(pdev, 0); - if (ether->txirq < 0) { - error = -ENXIO; - goto failed_free_io; - } - - ether->rxirq = platform_get_irq(pdev, 1); - if (ether->rxirq < 0) { - error = -ENXIO; - goto failed_free_io; - } - - platform_set_drvdata(pdev, dev); - - ether->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(ether->clk)) { - dev_err(&pdev->dev, "failed to get ether clock\n"); - error = PTR_ERR(ether->clk); - goto failed_free_io; - } - - ether->rmiiclk = clk_get(&pdev->dev, "RMII"); - if (IS_ERR(ether->rmiiclk)) { - dev_err(&pdev->dev, "failed to get ether clock\n"); - error = PTR_ERR(ether->rmiiclk); - goto failed_put_clk; - } - - ether->pdev = pdev; - - w90p910_ether_setup(dev); - - error = register_netdev(dev); - if (error != 0) { - dev_err(&pdev->dev, "Register EMC w90p910 FAILED\n"); - error = -ENODEV; - goto failed_put_rmiiclk; - } - - return 0; -failed_put_rmiiclk: - clk_put(ether->rmiiclk); -failed_put_clk: - clk_put(ether->clk); -failed_free_io: - iounmap(ether->reg); -failed_free_mem: - release_mem_region(ether->res->start, resource_size(ether->res)); -failed_free: - free_netdev(dev); - return error; -} - -static int w90p910_ether_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct w90p910_ether *ether = netdev_priv(dev); - - unregister_netdev(dev); - - clk_put(ether->rmiiclk); - clk_put(ether->clk); - - iounmap(ether->reg); - release_mem_region(ether->res->start, resource_size(ether->res)); - - del_timer_sync(ðer->check_timer); - - free_netdev(dev); - return 0; -} - -static struct platform_driver w90p910_ether_driver = { - .probe = w90p910_ether_probe, - .remove = w90p910_ether_remove, - .driver = { - .name = "nuc900-emc", - }, -}; - -module_platform_driver(w90p910_ether_driver); - -MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); -MODULE_DESCRIPTION("w90p910 MAC driver!"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:nuc900-emc"); - diff --git a/drivers/net/ethernet/nxp/Kconfig b/drivers/net/ethernet/nxp/Kconfig index 261f107e2be0..418afb84c84b 100644 --- a/drivers/net/ethernet/nxp/Kconfig +++ b/drivers/net/ethernet/nxp/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config LPC_ENET tristate "NXP ethernet MAC on LPC devices" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX || COMPILE_TEST select PHYLIB help Say Y or M here if you want to use the NXP ethernet MAC included on diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index f7e11f1b0426..141571e2ec11 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -14,14 +14,12 @@ #include <linux/crc32.h> #include <linux/etherdevice.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/of_net.h> #include <linux/phy.h> #include <linux/platform_device.h> #include <linux/spinlock.h> - -#include <mach/board.h> -#include <mach/hardware.h> -#include <mach/platform.h> +#include <linux/soc/nxp/lpc32xx-misc.h> #define MODNAME "lpc-eth" #define DRV_VERSION "1.00" @@ -1237,16 +1235,9 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) dma_addr_t dma_handle; struct resource *res; int irq, ret; - u32 tmp; /* Setup network interface for RMII or MII mode */ - tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL); - tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK; - if (lpc_phy_interface_mode(dev) == PHY_INTERFACE_MODE_MII) - tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS; - else - tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS; - __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL); + lpc32xx_set_phy_interface_mode(lpc_phy_interface_mode(dev)); /* Get platform resources */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1311,19 +1302,18 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) /* Get size of DMA buffers/descriptors region */ pldat->dma_buff_size = (ENET_TX_DESC + ENET_RX_DESC) * (ENET_MAXF_SIZE + sizeof(struct txrx_desc_t) + sizeof(struct rx_status_t)); - pldat->dma_buff_base_v = 0; if (use_iram_for_net(dev)) { - dma_handle = LPC32XX_IRAM_BASE; - if (pldat->dma_buff_size <= lpc32xx_return_iram_size()) - pldat->dma_buff_base_v = - io_p2v(LPC32XX_IRAM_BASE); - else + if (pldat->dma_buff_size > + lpc32xx_return_iram(&pldat->dma_buff_base_v, &dma_handle)) { + pldat->dma_buff_base_v = NULL; + pldat->dma_buff_size = 0; netdev_err(ndev, "IRAM not big enough for net buffers, using SDRAM instead.\n"); + } } - if (pldat->dma_buff_base_v == 0) { + if (pldat->dma_buff_base_v == NULL) { ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); if (ret) goto err_out_free_irq; @@ -1344,13 +1334,14 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) pldat->dma_buff_base_p = dma_handle; netdev_dbg(ndev, "IO address space :%pR\n", res); - netdev_dbg(ndev, "IO address size :%d\n", resource_size(res)); + netdev_dbg(ndev, "IO address size :%zd\n", + (size_t)resource_size(res)); netdev_dbg(ndev, "IO address (mapped) :0x%p\n", pldat->net_base); netdev_dbg(ndev, "IRQ number :%d\n", ndev->irq); - netdev_dbg(ndev, "DMA buffer size :%d\n", pldat->dma_buff_size); - netdev_dbg(ndev, "DMA buffer P address :0x%08x\n", - pldat->dma_buff_base_p); + netdev_dbg(ndev, "DMA buffer size :%zd\n", pldat->dma_buff_size); + netdev_dbg(ndev, "DMA buffer P address :%pad\n", + &pldat->dma_buff_base_p); netdev_dbg(ndev, "DMA buffer V address :0x%p\n", pldat->dma_buff_base_v); @@ -1397,8 +1388,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) if (ret) goto err_out_unregister_netdev; - netdev_info(ndev, "LPC mac at 0x%08x irq %d\n", - res->start, ndev->irq); + netdev_info(ndev, "LPC mac at 0x%08lx irq %d\n", + (unsigned long)res->start, ndev->irq); device_init_wakeup(dev, 1); device_set_wakeup_enable(dev, 0); @@ -1409,7 +1400,7 @@ err_out_unregister_netdev: unregister_netdev(ndev); err_out_dma_unmap: if (!use_iram_for_net(dev) || - pldat->dma_buff_size > lpc32xx_return_iram_size()) + pldat->dma_buff_size > lpc32xx_return_iram(NULL, NULL)) dma_free_coherent(dev, pldat->dma_buff_size, pldat->dma_buff_base_v, pldat->dma_buff_base_p); @@ -1436,7 +1427,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev) unregister_netdev(ndev); if (!use_iram_for_net(&pldat->pdev->dev) || - pldat->dma_buff_size > lpc32xx_return_iram_size()) + pldat->dma_buff_size > lpc32xx_return_iram(NULL, NULL)) dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size, pldat->dma_buff_base_v, pldat->dma_buff_base_p); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index e004eb1b881c..2e29ab841b4d 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -258,11 +258,6 @@ static struct class mdio_bus_class = { }; #if IS_ENABLED(CONFIG_OF_MDIO) -/* Helper function for of_mdio_find_bus */ -static int of_mdio_bus_match(struct device *dev, const void *mdio_bus_np) -{ - return dev->of_node == mdio_bus_np; -} /** * of_mdio_find_bus - Given an mii_bus node, find the mii_bus. * @mdio_bus_np: Pointer to the mii_bus. @@ -283,9 +278,7 @@ struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np) if (!mdio_bus_np) return NULL; - d = class_find_device(&mdio_bus_class, NULL, mdio_bus_np, - of_mdio_bus_match); - + d = class_find_device_by_of_node(&mdio_bus_class, mdio_bus_np); return d ? to_mii_bus(d) : NULL; } EXPORT_SYMBOL(of_mdio_find_bus); |