summaryrefslogtreecommitdiff
path: root/block
diff options
context:
space:
mode:
Diffstat (limited to 'block')
-rw-r--r--block/Kconfig1
-rw-r--r--block/badblocks.c1618
-rw-r--r--block/blk-flush.c11
-rw-r--r--block/blk-mq-debugfs.c1
-rw-r--r--block/blk-mq.c45
-rw-r--r--block/blk-mq.h57
-rw-r--r--block/partitions/ibm.c98
-rw-r--r--block/sed-opal.c18
8 files changed, 1465 insertions, 384 deletions
diff --git a/block/Kconfig b/block/Kconfig
index f1364d1c0d93..55ae2286a4de 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -186,6 +186,7 @@ config BLK_SED_OPAL
bool "Logic for interfacing with Opal enabled SEDs"
depends on KEYS
select PSERIES_PLPKS if PPC_PSERIES
+ select PSERIES_PLPKS_SED if PPC_PSERIES
help
Builds Logic for interfacing with Opal enabled controllers.
Enabling this option enables users to setup/unlock/lock
diff --git a/block/badblocks.c b/block/badblocks.c
index 3afb550c0f7b..fc92d4e18aa3 100644
--- a/block/badblocks.c
+++ b/block/badblocks.c
@@ -16,119 +16,830 @@
#include <linux/types.h>
#include <linux/slab.h>
-/**
- * badblocks_check() - check a given range for bad sectors
- * @bb: the badblocks structure that holds all badblock information
- * @s: sector (start) at which to check for badblocks
- * @sectors: number of sectors to check for badblocks
- * @first_bad: pointer to store location of the first badblock
- * @bad_sectors: pointer to store number of badblocks after @first_bad
+/*
+ * The purpose of badblocks set/clear is to manage bad blocks ranges which are
+ * identified by LBA addresses.
*
- * We can record which blocks on each device are 'bad' and so just
- * fail those blocks, or that stripe, rather than the whole device.
- * Entries in the bad-block table are 64bits wide. This comprises:
- * Length of bad-range, in sectors: 0-511 for lengths 1-512
- * Start of bad-range, sector offset, 54 bits (allows 8 exbibytes)
- * A 'shift' can be set so that larger blocks are tracked and
- * consequently larger devices can be covered.
- * 'Acknowledged' flag - 1 bit. - the most significant bit.
+ * When the caller of badblocks_set() wants to set a range of bad blocks, the
+ * setting range can be acked or unacked. And the setting range may merge,
+ * overwrite, skip the overlapped already set range, depends on who they are
+ * overlapped or adjacent, and the acknowledgment type of the ranges. It can be
+ * more complicated when the setting range covers multiple already set bad block
+ * ranges, with restrictions of maximum length of each bad range and the bad
+ * table space limitation.
*
- * Locking of the bad-block table uses a seqlock so badblocks_check
- * might need to retry if it is very unlucky.
- * We will sometimes want to check for bad blocks in a bi_end_io function,
- * so we use the write_seqlock_irq variant.
+ * It is difficult and unnecessary to take care of all the possible situations,
+ * for setting a large range of bad blocks, we can handle it by dividing the
+ * large range into smaller ones when encounter overlap, max range length or
+ * bad table full conditions. Every time only a smaller piece of the bad range
+ * is handled with a limited number of conditions how it is interacted with
+ * possible overlapped or adjacent already set bad block ranges. Then the hard
+ * complicated problem can be much simpler to handle in proper way.
*
- * When looking for a bad block we specify a range and want to
- * know if any block in the range is bad. So we binary-search
- * to the last range that starts at-or-before the given endpoint,
- * (or "before the sector after the target range")
- * then see if it ends after the given start.
+ * When setting a range of bad blocks to the bad table, the simplified situations
+ * to be considered are, (The already set bad blocks ranges are naming with
+ * prefix E, and the setting bad blocks range is naming with prefix S)
*
- * Return:
- * 0: there are no known bad blocks in the range
- * 1: there are known bad block which are all acknowledged
- * -1: there are bad blocks which have not yet been acknowledged in metadata.
- * plus the start/length of the first bad section we overlap.
+ * 1) A setting range is not overlapped or adjacent to any other already set bad
+ * block range.
+ * +--------+
+ * | S |
+ * +--------+
+ * +-------------+ +-------------+
+ * | E1 | | E2 |
+ * +-------------+ +-------------+
+ * For this situation if the bad blocks table is not full, just allocate a
+ * free slot from the bad blocks table to mark the setting range S. The
+ * result is,
+ * +-------------+ +--------+ +-------------+
+ * | E1 | | S | | E2 |
+ * +-------------+ +--------+ +-------------+
+ * 2) A setting range starts exactly at a start LBA of an already set bad blocks
+ * range.
+ * 2.1) The setting range size < already set range size
+ * +--------+
+ * | S |
+ * +--------+
+ * +-------------+
+ * | E |
+ * +-------------+
+ * 2.1.1) If S and E are both acked or unacked range, the setting range S can
+ * be merged into existing bad range E. The result is,
+ * +-------------+
+ * | S |
+ * +-------------+
+ * 2.1.2) If S is unacked setting and E is acked, the setting will be denied, and
+ * the result is,
+ * +-------------+
+ * | E |
+ * +-------------+
+ * 2.1.3) If S is acked setting and E is unacked, range S can overwrite on E.
+ * An extra slot from the bad blocks table will be allocated for S, and head
+ * of E will move to end of the inserted range S. The result is,
+ * +--------+----+
+ * | S | E |
+ * +--------+----+
+ * 2.2) The setting range size == already set range size
+ * 2.2.1) If S and E are both acked or unacked range, the setting range S can
+ * be merged into existing bad range E. The result is,
+ * +-------------+
+ * | S |
+ * +-------------+
+ * 2.2.2) If S is unacked setting and E is acked, the setting will be denied, and
+ * the result is,
+ * +-------------+
+ * | E |
+ * +-------------+
+ * 2.2.3) If S is acked setting and E is unacked, range S can overwrite all of
+ bad blocks range E. The result is,
+ * +-------------+
+ * | S |
+ * +-------------+
+ * 2.3) The setting range size > already set range size
+ * +-------------------+
+ * | S |
+ * +-------------------+
+ * +-------------+
+ * | E |
+ * +-------------+
+ * For such situation, the setting range S can be treated as two parts, the
+ * first part (S1) is as same size as the already set range E, the second
+ * part (S2) is the rest of setting range.
+ * +-------------+-----+ +-------------+ +-----+
+ * | S1 | S2 | | S1 | | S2 |
+ * +-------------+-----+ ===> +-------------+ +-----+
+ * +-------------+ +-------------+
+ * | E | | E |
+ * +-------------+ +-------------+
+ * Now we only focus on how to handle the setting range S1 and already set
+ * range E, which are already explained in 2.2), for the rest S2 it will be
+ * handled later in next loop.
+ * 3) A setting range starts before the start LBA of an already set bad blocks
+ * range.
+ * +-------------+
+ * | S |
+ * +-------------+
+ * +-------------+
+ * | E |
+ * +-------------+
+ * For this situation, the setting range S can be divided into two parts, the
+ * first (S1) ends at the start LBA of already set range E, the second part
+ * (S2) starts exactly at a start LBA of the already set range E.
+ * +----+---------+ +----+ +---------+
+ * | S1 | S2 | | S1 | | S2 |
+ * +----+---------+ ===> +----+ +---------+
+ * +-------------+ +-------------+
+ * | E | | E |
+ * +-------------+ +-------------+
+ * Now only the first part S1 should be handled in this loop, which is in
+ * similar condition as 1). The rest part S2 has exact same start LBA address
+ * of the already set range E, they will be handled in next loop in one of
+ * situations in 2).
+ * 4) A setting range starts after the start LBA of an already set bad blocks
+ * range.
+ * 4.1) If the setting range S exactly matches the tail part of already set bad
+ * blocks range E, like the following chart shows,
+ * +---------+
+ * | S |
+ * +---------+
+ * +-------------+
+ * | E |
+ * +-------------+
+ * 4.1.1) If range S and E have same acknowledge value (both acked or unacked),
+ * they will be merged into one, the result is,
+ * +-------------+
+ * | S |
+ * +-------------+
+ * 4.1.2) If range E is acked and the setting range S is unacked, the setting
+ * request of S will be rejected, the result is,
+ * +-------------+
+ * | E |
+ * +-------------+
+ * 4.1.3) If range E is unacked, and the setting range S is acked, then S may
+ * overwrite the overlapped range of E, the result is,
+ * +---+---------+
+ * | E | S |
+ * +---+---------+
+ * 4.2) If the setting range S stays in middle of an already set range E, like
+ * the following chart shows,
+ * +----+
+ * | S |
+ * +----+
+ * +--------------+
+ * | E |
+ * +--------------+
+ * 4.2.1) If range S and E have same acknowledge value (both acked or unacked),
+ * they will be merged into one, the result is,
+ * +--------------+
+ * | S |
+ * +--------------+
+ * 4.2.2) If range E is acked and the setting range S is unacked, the setting
+ * request of S will be rejected, the result is also,
+ * +--------------+
+ * | E |
+ * +--------------+
+ * 4.2.3) If range E is unacked, and the setting range S is acked, then S will
+ * inserted into middle of E and split previous range E into two parts (E1
+ * and E2), the result is,
+ * +----+----+----+
+ * | E1 | S | E2 |
+ * +----+----+----+
+ * 4.3) If the setting bad blocks range S is overlapped with an already set bad
+ * blocks range E. The range S starts after the start LBA of range E, and
+ * ends after the end LBA of range E, as the following chart shows,
+ * +-------------------+
+ * | S |
+ * +-------------------+
+ * +-------------+
+ * | E |
+ * +-------------+
+ * For this situation the range S can be divided into two parts, the first
+ * part (S1) ends at end range E, and the second part (S2) has rest range of
+ * origin S.
+ * +---------+---------+ +---------+ +---------+
+ * | S1 | S2 | | S1 | | S2 |
+ * +---------+---------+ ===> +---------+ +---------+
+ * +-------------+ +-------------+
+ * | E | | E |
+ * +-------------+ +-------------+
+ * Now in this loop the setting range S1 and already set range E can be
+ * handled as the situations 4.1), the rest range S2 will be handled in next
+ * loop and ignored in this loop.
+ * 5) A setting bad blocks range S is adjacent to one or more already set bad
+ * blocks range(s), and they are all acked or unacked range.
+ * 5.1) Front merge: If the already set bad blocks range E is before setting
+ * range S and they are adjacent,
+ * +------+
+ * | S |
+ * +------+
+ * +-------+
+ * | E |
+ * +-------+
+ * 5.1.1) When total size of range S and E <= BB_MAX_LEN, and their acknowledge
+ * values are same, the setting range S can front merges into range E. The
+ * result is,
+ * +--------------+
+ * | S |
+ * +--------------+
+ * 5.1.2) Otherwise these two ranges cannot merge, just insert the setting
+ * range S right after already set range E into the bad blocks table. The
+ * result is,
+ * +--------+------+
+ * | E | S |
+ * +--------+------+
+ * 6) Special cases which above conditions cannot handle
+ * 6.1) Multiple already set ranges may merge into less ones in a full bad table
+ * +-------------------------------------------------------+
+ * | S |
+ * +-------------------------------------------------------+
+ * |<----- BB_MAX_LEN ----->|
+ * +-----+ +-----+ +-----+
+ * | E1 | | E2 | | E3 |
+ * +-----+ +-----+ +-----+
+ * In the above example, when the bad blocks table is full, inserting the
+ * first part of setting range S will fail because no more available slot
+ * can be allocated from bad blocks table. In this situation a proper
+ * setting method should be go though all the setting bad blocks range and
+ * look for chance to merge already set ranges into less ones. When there
+ * is available slot from bad blocks table, re-try again to handle more
+ * setting bad blocks ranges as many as possible.
+ * +------------------------+
+ * | S3 |
+ * +------------------------+
+ * |<----- BB_MAX_LEN ----->|
+ * +-----+-----+-----+---+-----+--+
+ * | S1 | S2 |
+ * +-----+-----+-----+---+-----+--+
+ * The above chart shows although the first part (S3) cannot be inserted due
+ * to no-space in bad blocks table, but the following E1, E2 and E3 ranges
+ * can be merged with rest part of S into less range S1 and S2. Now there is
+ * 1 free slot in bad blocks table.
+ * +------------------------+-----+-----+-----+---+-----+--+
+ * | S3 | S1 | S2 |
+ * +------------------------+-----+-----+-----+---+-----+--+
+ * Since the bad blocks table is not full anymore, re-try again for the
+ * origin setting range S. Now the setting range S3 can be inserted into the
+ * bad blocks table with previous freed slot from multiple ranges merge.
+ * 6.2) Front merge after overwrite
+ * In the following example, in bad blocks table, E1 is an acked bad blocks
+ * range and E2 is an unacked bad blocks range, therefore they are not able
+ * to merge into a larger range. The setting bad blocks range S is acked,
+ * therefore part of E2 can be overwritten by S.
+ * +--------+
+ * | S | acknowledged
+ * +--------+ S: 1
+ * +-------+-------------+ E1: 1
+ * | E1 | E2 | E2: 0
+ * +-------+-------------+
+ * With previous simplified routines, after overwriting part of E2 with S,
+ * the bad blocks table should be (E3 is remaining part of E2 which is not
+ * overwritten by S),
+ * acknowledged
+ * +-------+--------+----+ S: 1
+ * | E1 | S | E3 | E1: 1
+ * +-------+--------+----+ E3: 0
+ * The above result is correct but not perfect. Range E1 and S in the bad
+ * blocks table are all acked, merging them into a larger one range may
+ * occupy less bad blocks table space and make badblocks_check() faster.
+ * Therefore in such situation, after overwriting range S, the previous range
+ * E1 should be checked for possible front combination. Then the ideal
+ * result can be,
+ * +----------------+----+ acknowledged
+ * | E1 | E3 | E1: 1
+ * +----------------+----+ E3: 0
+ * 6.3) Behind merge: If the already set bad blocks range E is behind the setting
+ * range S and they are adjacent. Normally we don't need to care about this
+ * because front merge handles this while going though range S from head to
+ * tail, except for the tail part of range S. When the setting range S are
+ * fully handled, all the above simplified routine doesn't check whether the
+ * tail LBA of range S is adjacent to the next already set range and not
+ * merge them even it is possible.
+ * +------+
+ * | S |
+ * +------+
+ * +-------+
+ * | E |
+ * +-------+
+ * For the above special situation, when the setting range S are all handled
+ * and the loop ends, an extra check is necessary for whether next already
+ * set range E is right after S and mergeable.
+ * 6.3.1) When total size of range E and S <= BB_MAX_LEN, and their acknowledge
+ * values are same, the setting range S can behind merges into range E. The
+ * result is,
+ * +--------------+
+ * | S |
+ * +--------------+
+ * 6.3.2) Otherwise these two ranges cannot merge, just insert the setting range
+ * S in front of the already set range E in the bad blocks table. The result
+ * is,
+ * +------+-------+
+ * | S | E |
+ * +------+-------+
+ *
+ * All the above 5 simplified situations and 3 special cases may cover 99%+ of
+ * the bad block range setting conditions. Maybe there is some rare corner case
+ * is not considered and optimized, it won't hurt if badblocks_set() fails due
+ * to no space, or some ranges are not merged to save bad blocks table space.
+ *
+ * Inside badblocks_set() each loop starts by jumping to re_insert label, every
+ * time for the new loop prev_badblocks() is called to find an already set range
+ * which starts before or at current setting range. Since the setting bad blocks
+ * range is handled from head to tail, most of the cases it is unnecessary to do
+ * the binary search inside prev_badblocks(), it is possible to provide a hint
+ * to prev_badblocks() for a fast path, then the expensive binary search can be
+ * avoided. In my test with the hint to prev_badblocks(), except for the first
+ * loop, all rested calls to prev_badblocks() can go into the fast path and
+ * return correct bad blocks table index immediately.
+ *
+ *
+ * Clearing a bad blocks range from the bad block table has similar idea as
+ * setting does, but much more simpler. The only thing needs to be noticed is
+ * when the clearing range hits middle of a bad block range, the existing bad
+ * block range will split into two, and one more item should be added into the
+ * bad block table. The simplified situations to be considered are, (The already
+ * set bad blocks ranges in bad block table are naming with prefix E, and the
+ * clearing bad blocks range is naming with prefix C)
+ *
+ * 1) A clearing range is not overlapped to any already set ranges in bad block
+ * table.
+ * +-----+ | +-----+ | +-----+
+ * | C | | | C | | | C |
+ * +-----+ or +-----+ or +-----+
+ * +---+ | +----+ +----+ | +---+
+ * | E | | | E1 | | E2 | | | E |
+ * +---+ | +----+ +----+ | +---+
+ * For the above situations, no bad block to be cleared and no failure
+ * happens, simply returns 0.
+ * 2) The clearing range hits middle of an already setting bad blocks range in
+ * the bad block table.
+ * +---+
+ * | C |
+ * +---+
+ * +-----------------+
+ * | E |
+ * +-----------------+
+ * In this situation if the bad block table is not full, the range E will be
+ * split into two ranges E1 and E2. The result is,
+ * +------+ +------+
+ * | E1 | | E2 |
+ * +------+ +------+
+ * 3) The clearing range starts exactly at same LBA as an already set bad block range
+ * from the bad block table.
+ * 3.1) Partially covered at head part
+ * +------------+
+ * | C |
+ * +------------+
+ * +-----------------+
+ * | E |
+ * +-----------------+
+ * For this situation, the overlapped already set range will update the
+ * start LBA to end of C and shrink the range to BB_LEN(E) - BB_LEN(C). No
+ * item deleted from bad block table. The result is,
+ * +----+
+ * | E1 |
+ * +----+
+ * 3.2) Exact fully covered
+ * +-----------------+
+ * | C |
+ * +-----------------+
+ * +-----------------+
+ * | E |
+ * +-----------------+
+ * For this situation the whole bad blocks range E will be cleared and its
+ * corresponded item is deleted from the bad block table.
+ * 4) The clearing range exactly ends at same LBA as an already set bad block
+ * range.
+ * +-------+
+ * | C |
+ * +-------+
+ * +-----------------+
+ * | E |
+ * +-----------------+
+ * For the above situation, the already set range E is updated to shrink its
+ * end to the start of C, and reduce its length to BB_LEN(E) - BB_LEN(C).
+ * The result is,
+ * +---------+
+ * | E |
+ * +---------+
+ * 5) The clearing range is partially overlapped with an already set bad block
+ * range from the bad block table.
+ * 5.1) The already set bad block range is front overlapped with the clearing
+ * range.
+ * +----------+
+ * | C |
+ * +----------+
+ * +------------+
+ * | E |
+ * +------------+
+ * For such situation, the clearing range C can be treated as two parts. The
+ * first part ends at the start LBA of range E, and the second part starts at
+ * same LBA of range E.
+ * +----+-----+ +----+ +-----+
+ * | C1 | C2 | | C1 | | C2 |
+ * +----+-----+ ===> +----+ +-----+
+ * +------------+ +------------+
+ * | E | | E |
+ * +------------+ +------------+
+ * Now the first part C1 can be handled as condition 1), and the second part C2 can be
+ * handled as condition 3.1) in next loop.
+ * 5.2) The already set bad block range is behind overlaopped with the clearing
+ * range.
+ * +----------+
+ * | C |
+ * +----------+
+ * +------------+
+ * | E |
+ * +------------+
+ * For such situation, the clearing range C can be treated as two parts. The
+ * first part C1 ends at same end LBA of range E, and the second part starts
+ * at end LBA of range E.
+ * +----+-----+ +----+ +-----+
+ * | C1 | C2 | | C1 | | C2 |
+ * +----+-----+ ===> +----+ +-----+
+ * +------------+ +------------+
+ * | E | | E |
+ * +------------+ +------------+
+ * Now the first part clearing range C1 can be handled as condition 4), and
+ * the second part clearing range C2 can be handled as condition 1) in next
+ * loop.
+ *
+ * All bad blocks range clearing can be simplified into the above 5 situations
+ * by only handling the head part of the clearing range in each run of the
+ * while-loop. The idea is similar to bad blocks range setting but much
+ * simpler.
*/
-int badblocks_check(struct badblocks *bb, sector_t s, int sectors,
- sector_t *first_bad, int *bad_sectors)
+
+/*
+ * Find the range starts at-or-before 's' from bad table. The search
+ * starts from index 'hint' and stops at index 'hint_end' from the bad
+ * table.
+ */
+static int prev_by_hint(struct badblocks *bb, sector_t s, int hint)
{
- int hi;
- int lo;
+ int hint_end = hint + 2;
u64 *p = bb->page;
- int rv;
- sector_t target = s + sectors;
- unsigned seq;
+ int ret = -1;
- if (bb->shift > 0) {
- /* round the start down, and the end up */
- s >>= bb->shift;
- target += (1<<bb->shift) - 1;
- target >>= bb->shift;
+ while ((hint < hint_end) && ((hint + 1) <= bb->count) &&
+ (BB_OFFSET(p[hint]) <= s)) {
+ if ((hint + 1) == bb->count || BB_OFFSET(p[hint + 1]) > s) {
+ ret = hint;
+ break;
+ }
+ hint++;
+ }
+
+ return ret;
+}
+
+/*
+ * Find the range starts at-or-before bad->start. If 'hint' is provided
+ * (hint >= 0) then search in the bad table from hint firstly. It is
+ * very probably the wanted bad range can be found from the hint index,
+ * then the unnecessary while-loop iteration can be avoided.
+ */
+static int prev_badblocks(struct badblocks *bb, struct badblocks_context *bad,
+ int hint)
+{
+ sector_t s = bad->start;
+ int ret = -1;
+ int lo, hi;
+ u64 *p;
+
+ if (!bb->count)
+ goto out;
+
+ if (hint >= 0) {
+ ret = prev_by_hint(bb, s, hint);
+ if (ret >= 0)
+ goto out;
}
- /* 'target' is now the first block after the bad range */
-retry:
- seq = read_seqbegin(&bb->lock);
lo = 0;
- rv = 0;
hi = bb->count;
+ p = bb->page;
- /* Binary search between lo and hi for 'target'
- * i.e. for the last range that starts before 'target'
- */
- /* INVARIANT: ranges before 'lo' and at-or-after 'hi'
- * are known not to be the last range before target.
- * VARIANT: hi-lo is the number of possible
- * ranges, and decreases until it reaches 1
- */
+ /* The following bisect search might be unnecessary */
+ if (BB_OFFSET(p[lo]) > s)
+ return -1;
+ if (BB_OFFSET(p[hi - 1]) <= s)
+ return hi - 1;
+
+ /* Do bisect search in bad table */
while (hi - lo > 1) {
- int mid = (lo + hi) / 2;
+ int mid = (lo + hi)/2;
sector_t a = BB_OFFSET(p[mid]);
- if (a < target)
- /* This could still be the one, earlier ranges
- * could not.
- */
+ if (a == s) {
+ ret = mid;
+ goto out;
+ }
+
+ if (a < s)
lo = mid;
else
- /* This and later ranges are definitely out. */
hi = mid;
}
- /* 'lo' might be the last that started before target, but 'hi' isn't */
- if (hi > lo) {
- /* need to check all range that end after 's' to see if
- * any are unacknowledged.
+
+ if (BB_OFFSET(p[lo]) <= s)
+ ret = lo;
+out:
+ return ret;
+}
+
+/*
+ * Return 'true' if the range indicated by 'bad' can be backward merged
+ * with the bad range (from the bad table) index by 'behind'.
+ */
+static bool can_merge_behind(struct badblocks *bb,
+ struct badblocks_context *bad, int behind)
+{
+ sector_t sectors = bad->len;
+ sector_t s = bad->start;
+ u64 *p = bb->page;
+
+ if ((s < BB_OFFSET(p[behind])) &&
+ ((s + sectors) >= BB_OFFSET(p[behind])) &&
+ ((BB_END(p[behind]) - s) <= BB_MAX_LEN) &&
+ BB_ACK(p[behind]) == bad->ack)
+ return true;
+ return false;
+}
+
+/*
+ * Do backward merge for range indicated by 'bad' and the bad range
+ * (from the bad table) indexed by 'behind'. The return value is merged
+ * sectors from bad->len.
+ */
+static int behind_merge(struct badblocks *bb, struct badblocks_context *bad,
+ int behind)
+{
+ sector_t sectors = bad->len;
+ sector_t s = bad->start;
+ u64 *p = bb->page;
+ int merged = 0;
+
+ WARN_ON(s >= BB_OFFSET(p[behind]));
+ WARN_ON((s + sectors) < BB_OFFSET(p[behind]));
+
+ if (s < BB_OFFSET(p[behind])) {
+ merged = BB_OFFSET(p[behind]) - s;
+ p[behind] = BB_MAKE(s, BB_LEN(p[behind]) + merged, bad->ack);
+
+ WARN_ON((BB_LEN(p[behind]) + merged) >= BB_MAX_LEN);
+ }
+
+ return merged;
+}
+
+/*
+ * Return 'true' if the range indicated by 'bad' can be forward
+ * merged with the bad range (from the bad table) indexed by 'prev'.
+ */
+static bool can_merge_front(struct badblocks *bb, int prev,
+ struct badblocks_context *bad)
+{
+ sector_t s = bad->start;
+ u64 *p = bb->page;
+
+ if (BB_ACK(p[prev]) == bad->ack &&
+ (s < BB_END(p[prev]) ||
+ (s == BB_END(p[prev]) && (BB_LEN(p[prev]) < BB_MAX_LEN))))
+ return true;
+ return false;
+}
+
+/*
+ * Do forward merge for range indicated by 'bad' and the bad range
+ * (from bad table) indexed by 'prev'. The return value is sectors
+ * merged from bad->len.
+ */
+static int front_merge(struct badblocks *bb, int prev, struct badblocks_context *bad)
+{
+ sector_t sectors = bad->len;
+ sector_t s = bad->start;
+ u64 *p = bb->page;
+ int merged = 0;
+
+ WARN_ON(s > BB_END(p[prev]));
+
+ if (s < BB_END(p[prev])) {
+ merged = min_t(sector_t, sectors, BB_END(p[prev]) - s);
+ } else {
+ merged = min_t(sector_t, sectors, BB_MAX_LEN - BB_LEN(p[prev]));
+ if ((prev + 1) < bb->count &&
+ merged > (BB_OFFSET(p[prev + 1]) - BB_END(p[prev]))) {
+ merged = BB_OFFSET(p[prev + 1]) - BB_END(p[prev]);
+ }
+
+ p[prev] = BB_MAKE(BB_OFFSET(p[prev]),
+ BB_LEN(p[prev]) + merged, bad->ack);
+ }
+
+ return merged;
+}
+
+/*
+ * 'Combine' is a special case which can_merge_front() is not able to
+ * handle: If a bad range (indexed by 'prev' from bad table) exactly
+ * starts as bad->start, and the bad range ahead of 'prev' (indexed by
+ * 'prev - 1' from bad table) exactly ends at where 'prev' starts, and
+ * the sum of their lengths does not exceed BB_MAX_LEN limitation, then
+ * these two bad range (from bad table) can be combined.
+ *
+ * Return 'true' if bad ranges indexed by 'prev' and 'prev - 1' from bad
+ * table can be combined.
+ */
+static bool can_combine_front(struct badblocks *bb, int prev,
+ struct badblocks_context *bad)
+{
+ u64 *p = bb->page;
+
+ if ((prev > 0) &&
+ (BB_OFFSET(p[prev]) == bad->start) &&
+ (BB_END(p[prev - 1]) == BB_OFFSET(p[prev])) &&
+ (BB_LEN(p[prev - 1]) + BB_LEN(p[prev]) <= BB_MAX_LEN) &&
+ (BB_ACK(p[prev - 1]) == BB_ACK(p[prev])))
+ return true;
+ return false;
+}
+
+/*
+ * Combine the bad ranges indexed by 'prev' and 'prev - 1' (from bad
+ * table) into one larger bad range, and the new range is indexed by
+ * 'prev - 1'.
+ * The caller of front_combine() will decrease bb->count, therefore
+ * it is unnecessary to clear p[perv] after front merge.
+ */
+static void front_combine(struct badblocks *bb, int prev)
+{
+ u64 *p = bb->page;
+
+ p[prev - 1] = BB_MAKE(BB_OFFSET(p[prev - 1]),
+ BB_LEN(p[prev - 1]) + BB_LEN(p[prev]),
+ BB_ACK(p[prev]));
+ if ((prev + 1) < bb->count)
+ memmove(p + prev, p + prev + 1, (bb->count - prev - 1) * 8);
+}
+
+/*
+ * Return 'true' if the range indicated by 'bad' is exactly forward
+ * overlapped with the bad range (from bad table) indexed by 'front'.
+ * Exactly forward overlap means the bad range (from bad table) indexed
+ * by 'prev' does not cover the whole range indicated by 'bad'.
+ */
+static bool overlap_front(struct badblocks *bb, int front,
+ struct badblocks_context *bad)
+{
+ u64 *p = bb->page;
+
+ if (bad->start >= BB_OFFSET(p[front]) &&
+ bad->start < BB_END(p[front]))
+ return true;
+ return false;
+}
+
+/*
+ * Return 'true' if the range indicated by 'bad' is exactly backward
+ * overlapped with the bad range (from bad table) indexed by 'behind'.
+ */
+static bool overlap_behind(struct badblocks *bb, struct badblocks_context *bad,
+ int behind)
+{
+ u64 *p = bb->page;
+
+ if (bad->start < BB_OFFSET(p[behind]) &&
+ (bad->start + bad->len) > BB_OFFSET(p[behind]))
+ return true;
+ return false;
+}
+
+/*
+ * Return 'true' if the range indicated by 'bad' can overwrite the bad
+ * range (from bad table) indexed by 'prev'.
+ *
+ * The range indicated by 'bad' can overwrite the bad range indexed by
+ * 'prev' when,
+ * 1) The whole range indicated by 'bad' can cover partial or whole bad
+ * range (from bad table) indexed by 'prev'.
+ * 2) The ack value of 'bad' is larger or equal to the ack value of bad
+ * range 'prev'.
+ *
+ * If the overwriting doesn't cover the whole bad range (from bad table)
+ * indexed by 'prev', new range might be split from existing bad range,
+ * 1) The overwrite covers head or tail part of existing bad range, 1
+ * extra bad range will be split and added into the bad table.
+ * 2) The overwrite covers middle of existing bad range, 2 extra bad
+ * ranges will be split (ahead and after the overwritten range) and
+ * added into the bad table.
+ * The number of extra split ranges of the overwriting is stored in
+ * 'extra' and returned for the caller.
+ */
+static bool can_front_overwrite(struct badblocks *bb, int prev,
+ struct badblocks_context *bad, int *extra)
+{
+ u64 *p = bb->page;
+ int len;
+
+ WARN_ON(!overlap_front(bb, prev, bad));
+
+ if (BB_ACK(p[prev]) >= bad->ack)
+ return false;
+
+ if (BB_END(p[prev]) <= (bad->start + bad->len)) {
+ len = BB_END(p[prev]) - bad->start;
+ if (BB_OFFSET(p[prev]) == bad->start)
+ *extra = 0;
+ else
+ *extra = 1;
+
+ bad->len = len;
+ } else {
+ if (BB_OFFSET(p[prev]) == bad->start)
+ *extra = 1;
+ else
+ /*
+ * prev range will be split into two, beside the overwritten
+ * one, an extra slot needed from bad table.
*/
- while (lo >= 0 &&
- BB_OFFSET(p[lo]) + BB_LEN(p[lo]) > s) {
- if (BB_OFFSET(p[lo]) < target) {
- /* starts before the end, and finishes after
- * the start, so they must overlap
- */
- if (rv != -1 && BB_ACK(p[lo]))
- rv = 1;
- else
- rv = -1;
- *first_bad = BB_OFFSET(p[lo]);
- *bad_sectors = BB_LEN(p[lo]);
- }
- lo--;
+ *extra = 2;
+ }
+
+ if ((bb->count + (*extra)) >= MAX_BADBLOCKS)
+ return false;
+
+ return true;
+}
+
+/*
+ * Do the overwrite from the range indicated by 'bad' to the bad range
+ * (from bad table) indexed by 'prev'.
+ * The previously called can_front_overwrite() will provide how many
+ * extra bad range(s) might be split and added into the bad table. All
+ * the splitting cases in the bad table will be handled here.
+ */
+static int front_overwrite(struct badblocks *bb, int prev,
+ struct badblocks_context *bad, int extra)
+{
+ u64 *p = bb->page;
+ sector_t orig_end = BB_END(p[prev]);
+ int orig_ack = BB_ACK(p[prev]);
+
+ switch (extra) {
+ case 0:
+ p[prev] = BB_MAKE(BB_OFFSET(p[prev]), BB_LEN(p[prev]),
+ bad->ack);
+ break;
+ case 1:
+ if (BB_OFFSET(p[prev]) == bad->start) {
+ p[prev] = BB_MAKE(BB_OFFSET(p[prev]),
+ bad->len, bad->ack);
+ memmove(p + prev + 2, p + prev + 1,
+ (bb->count - prev - 1) * 8);
+ p[prev + 1] = BB_MAKE(bad->start + bad->len,
+ orig_end - BB_END(p[prev]),
+ orig_ack);
+ } else {
+ p[prev] = BB_MAKE(BB_OFFSET(p[prev]),
+ bad->start - BB_OFFSET(p[prev]),
+ orig_ack);
+ /*
+ * prev +2 -> prev + 1 + 1, which is for,
+ * 1) prev + 1: the slot index of the previous one
+ * 2) + 1: one more slot for extra being 1.
+ */
+ memmove(p + prev + 2, p + prev + 1,
+ (bb->count - prev - 1) * 8);
+ p[prev + 1] = BB_MAKE(bad->start, bad->len, bad->ack);
}
+ break;
+ case 2:
+ p[prev] = BB_MAKE(BB_OFFSET(p[prev]),
+ bad->start - BB_OFFSET(p[prev]),
+ orig_ack);
+ /*
+ * prev + 3 -> prev + 1 + 2, which is for,
+ * 1) prev + 1: the slot index of the previous one
+ * 2) + 2: two more slots for extra being 2.
+ */
+ memmove(p + prev + 3, p + prev + 1,
+ (bb->count - prev - 1) * 8);
+ p[prev + 1] = BB_MAKE(bad->start, bad->len, bad->ack);
+ p[prev + 2] = BB_MAKE(BB_END(p[prev + 1]),
+ orig_end - BB_END(p[prev + 1]),
+ orig_ack);
+ break;
+ default:
+ break;
}
- if (read_seqretry(&bb->lock, seq))
- goto retry;
+ return bad->len;
+}
- return rv;
+/*
+ * Explicitly insert a range indicated by 'bad' to the bad table, where
+ * the location is indexed by 'at'.
+ */
+static int insert_at(struct badblocks *bb, int at, struct badblocks_context *bad)
+{
+ u64 *p = bb->page;
+ int len;
+
+ WARN_ON(badblocks_full(bb));
+
+ len = min_t(sector_t, bad->len, BB_MAX_LEN);
+ if (at < bb->count)
+ memmove(p + at + 1, p + at, (bb->count - at) * 8);
+ p[at] = BB_MAKE(bad->start, len, bad->ack);
+
+ return len;
}
-EXPORT_SYMBOL_GPL(badblocks_check);
static void badblocks_update_acked(struct badblocks *bb)
{
+ bool unacked = false;
u64 *p = bb->page;
int i;
- bool unacked = false;
if (!bb->unacked_exist)
return;
@@ -144,281 +855,600 @@ static void badblocks_update_acked(struct badblocks *bb)
bb->unacked_exist = 0;
}
-/**
- * badblocks_set() - Add a range of bad blocks to the table.
- * @bb: the badblocks structure that holds all badblock information
- * @s: first sector to mark as bad
- * @sectors: number of sectors to mark as bad
- * @acknowledged: weather to mark the bad sectors as acknowledged
- *
- * This might extend the table, or might contract it if two adjacent ranges
- * can be merged. We binary-search to find the 'insertion' point, then
- * decide how best to handle it.
- *
- * Return:
- * 0: success
- * 1: failed to set badblocks (out of space)
- */
-int badblocks_set(struct badblocks *bb, sector_t s, int sectors,
- int acknowledged)
+/* Do exact work to set bad block range into the bad block table */
+static int _badblocks_set(struct badblocks *bb, sector_t s, int sectors,
+ int acknowledged)
{
- u64 *p;
- int lo, hi;
- int rv = 0;
+ int retried = 0, space_desired = 0;
+ int orig_len, len = 0, added = 0;
+ struct badblocks_context bad;
+ int prev = -1, hint = -1;
+ sector_t orig_start;
unsigned long flags;
+ int rv = 0;
+ u64 *p;
if (bb->shift < 0)
/* badblocks are disabled */
return 1;
+ if (sectors == 0)
+ /* Invalid sectors number */
+ return 1;
+
if (bb->shift) {
/* round the start down, and the end up */
sector_t next = s + sectors;
- s >>= bb->shift;
- next += (1<<bb->shift) - 1;
- next >>= bb->shift;
+ rounddown(s, bb->shift);
+ roundup(next, bb->shift);
sectors = next - s;
}
write_seqlock_irqsave(&bb->lock, flags);
+ orig_start = s;
+ orig_len = sectors;
+ bad.ack = acknowledged;
p = bb->page;
- lo = 0;
- hi = bb->count;
- /* Find the last range that starts at-or-before 's' */
- while (hi - lo > 1) {
- int mid = (lo + hi) / 2;
- sector_t a = BB_OFFSET(p[mid]);
- if (a <= s)
- lo = mid;
- else
- hi = mid;
+re_insert:
+ bad.start = s;
+ bad.len = sectors;
+ len = 0;
+
+ if (badblocks_empty(bb)) {
+ len = insert_at(bb, 0, &bad);
+ bb->count++;
+ added++;
+ goto update_sectors;
}
- if (hi > lo && BB_OFFSET(p[lo]) > s)
- hi = lo;
- if (hi > lo) {
- /* we found a range that might merge with the start
- * of our new range
- */
- sector_t a = BB_OFFSET(p[lo]);
- sector_t e = a + BB_LEN(p[lo]);
- int ack = BB_ACK(p[lo]);
-
- if (e >= s) {
- /* Yes, we can merge with a previous range */
- if (s == a && s + sectors >= e)
- /* new range covers old */
- ack = acknowledged;
- else
- ack = ack && acknowledged;
-
- if (e < s + sectors)
- e = s + sectors;
- if (e - a <= BB_MAX_LEN) {
- p[lo] = BB_MAKE(a, e-a, ack);
- s = e;
+ prev = prev_badblocks(bb, &bad, hint);
+
+ /* start before all badblocks */
+ if (prev < 0) {
+ if (!badblocks_full(bb)) {
+ /* insert on the first */
+ if (bad.len > (BB_OFFSET(p[0]) - bad.start))
+ bad.len = BB_OFFSET(p[0]) - bad.start;
+ len = insert_at(bb, 0, &bad);
+ bb->count++;
+ added++;
+ hint = 0;
+ goto update_sectors;
+ }
+
+ /* No sapce, try to merge */
+ if (overlap_behind(bb, &bad, 0)) {
+ if (can_merge_behind(bb, &bad, 0)) {
+ len = behind_merge(bb, &bad, 0);
+ added++;
} else {
- /* does not all fit in one range,
- * make p[lo] maximal
- */
- if (BB_LEN(p[lo]) != BB_MAX_LEN)
- p[lo] = BB_MAKE(a, BB_MAX_LEN, ack);
- s = a + BB_MAX_LEN;
+ len = BB_OFFSET(p[0]) - s;
+ space_desired = 1;
}
- sectors = e - s;
+ hint = 0;
+ goto update_sectors;
}
+
+ /* no table space and give up */
+ goto out;
}
- if (sectors && hi < bb->count) {
- /* 'hi' points to the first range that starts after 's'.
- * Maybe we can merge with the start of that range
- */
- sector_t a = BB_OFFSET(p[hi]);
- sector_t e = a + BB_LEN(p[hi]);
- int ack = BB_ACK(p[hi]);
-
- if (a <= s + sectors) {
- /* merging is possible */
- if (e <= s + sectors) {
- /* full overlap */
- e = s + sectors;
- ack = acknowledged;
- } else
- ack = ack && acknowledged;
-
- a = s;
- if (e - a <= BB_MAX_LEN) {
- p[hi] = BB_MAKE(a, e-a, ack);
- s = e;
- } else {
- p[hi] = BB_MAKE(a, BB_MAX_LEN, ack);
- s = a + BB_MAX_LEN;
+
+ /* in case p[prev-1] can be merged with p[prev] */
+ if (can_combine_front(bb, prev, &bad)) {
+ front_combine(bb, prev);
+ bb->count--;
+ added++;
+ hint = prev;
+ goto update_sectors;
+ }
+
+ if (overlap_front(bb, prev, &bad)) {
+ if (can_merge_front(bb, prev, &bad)) {
+ len = front_merge(bb, prev, &bad);
+ added++;
+ } else {
+ int extra = 0;
+
+ if (!can_front_overwrite(bb, prev, &bad, &extra)) {
+ len = min_t(sector_t,
+ BB_END(p[prev]) - s, sectors);
+ hint = prev;
+ goto update_sectors;
+ }
+
+ len = front_overwrite(bb, prev, &bad, extra);
+ added++;
+ bb->count += extra;
+
+ if (can_combine_front(bb, prev, &bad)) {
+ front_combine(bb, prev);
+ bb->count--;
}
- sectors = e - s;
- lo = hi;
- hi++;
}
+ hint = prev;
+ goto update_sectors;
+ }
+
+ if (can_merge_front(bb, prev, &bad)) {
+ len = front_merge(bb, prev, &bad);
+ added++;
+ hint = prev;
+ goto update_sectors;
}
- if (sectors == 0 && hi < bb->count) {
- /* we might be able to combine lo and hi */
- /* Note: 's' is at the end of 'lo' */
- sector_t a = BB_OFFSET(p[hi]);
- int lolen = BB_LEN(p[lo]);
- int hilen = BB_LEN(p[hi]);
- int newlen = lolen + hilen - (s - a);
-
- if (s >= a && newlen < BB_MAX_LEN) {
- /* yes, we can combine them */
- int ack = BB_ACK(p[lo]) && BB_ACK(p[hi]);
-
- p[lo] = BB_MAKE(BB_OFFSET(p[lo]), newlen, ack);
- memmove(p + hi, p + hi + 1,
- (bb->count - hi - 1) * 8);
- bb->count--;
+
+ /* if no space in table, still try to merge in the covered range */
+ if (badblocks_full(bb)) {
+ /* skip the cannot-merge range */
+ if (((prev + 1) < bb->count) &&
+ overlap_behind(bb, &bad, prev + 1) &&
+ ((s + sectors) >= BB_END(p[prev + 1]))) {
+ len = BB_END(p[prev + 1]) - s;
+ hint = prev + 1;
+ goto update_sectors;
}
+
+ /* no retry any more */
+ len = sectors;
+ space_desired = 1;
+ hint = -1;
+ goto update_sectors;
}
- while (sectors) {
- /* didn't merge (it all).
- * Need to add a range just before 'hi'
- */
- if (bb->count >= MAX_BADBLOCKS) {
- /* No room for more */
- rv = 1;
- break;
- } else {
- int this_sectors = sectors;
- memmove(p + hi + 1, p + hi,
- (bb->count - hi) * 8);
- bb->count++;
+ /* cannot merge and there is space in bad table */
+ if ((prev + 1) < bb->count &&
+ overlap_behind(bb, &bad, prev + 1))
+ bad.len = min_t(sector_t,
+ bad.len, BB_OFFSET(p[prev + 1]) - bad.start);
- if (this_sectors > BB_MAX_LEN)
- this_sectors = BB_MAX_LEN;
- p[hi] = BB_MAKE(s, this_sectors, acknowledged);
- sectors -= this_sectors;
- s += this_sectors;
- }
+ len = insert_at(bb, prev + 1, &bad);
+ bb->count++;
+ added++;
+ hint = prev + 1;
+
+update_sectors:
+ s += len;
+ sectors -= len;
+
+ if (sectors > 0)
+ goto re_insert;
+
+ WARN_ON(sectors < 0);
+
+ /*
+ * Check whether the following already set range can be
+ * merged. (prev < 0) condition is not handled here,
+ * because it's already complicated enough.
+ */
+ if (prev >= 0 &&
+ (prev + 1) < bb->count &&
+ BB_END(p[prev]) == BB_OFFSET(p[prev + 1]) &&
+ (BB_LEN(p[prev]) + BB_LEN(p[prev + 1])) <= BB_MAX_LEN &&
+ BB_ACK(p[prev]) == BB_ACK(p[prev + 1])) {
+ p[prev] = BB_MAKE(BB_OFFSET(p[prev]),
+ BB_LEN(p[prev]) + BB_LEN(p[prev + 1]),
+ BB_ACK(p[prev]));
+
+ if ((prev + 2) < bb->count)
+ memmove(p + prev + 1, p + prev + 2,
+ (bb->count - (prev + 2)) * 8);
+ bb->count--;
+ }
+
+ if (space_desired && !badblocks_full(bb)) {
+ s = orig_start;
+ sectors = orig_len;
+ space_desired = 0;
+ if (retried++ < 3)
+ goto re_insert;
+ }
+
+out:
+ if (added) {
+ set_changed(bb);
+
+ if (!acknowledged)
+ bb->unacked_exist = 1;
+ else
+ badblocks_update_acked(bb);
}
- bb->changed = 1;
- if (!acknowledged)
- bb->unacked_exist = 1;
- else
- badblocks_update_acked(bb);
write_sequnlock_irqrestore(&bb->lock, flags);
+ if (!added)
+ rv = 1;
+
return rv;
}
-EXPORT_SYMBOL_GPL(badblocks_set);
-/**
- * badblocks_clear() - Remove a range of bad blocks to the table.
- * @bb: the badblocks structure that holds all badblock information
- * @s: first sector to mark as bad
- * @sectors: number of sectors to mark as bad
- *
- * This may involve extending the table if we spilt a region,
- * but it must not fail. So if the table becomes full, we just
- * drop the remove request.
- *
- * Return:
- * 0: success
- * 1: failed to clear badblocks
+/*
+ * Clear the bad block range from bad block table which is front overlapped
+ * with the clearing range. The return value is how many sectors from an
+ * already set bad block range are cleared. If the whole bad block range is
+ * covered by the clearing range and fully cleared, 'delete' is set as 1 for
+ * the caller to reduce bb->count.
*/
-int badblocks_clear(struct badblocks *bb, sector_t s, int sectors)
+static int front_clear(struct badblocks *bb, int prev,
+ struct badblocks_context *bad, int *deleted)
{
- u64 *p;
- int lo, hi;
- sector_t target = s + sectors;
+ sector_t sectors = bad->len;
+ sector_t s = bad->start;
+ u64 *p = bb->page;
+ int cleared = 0;
+
+ *deleted = 0;
+ if (s == BB_OFFSET(p[prev])) {
+ if (BB_LEN(p[prev]) > sectors) {
+ p[prev] = BB_MAKE(BB_OFFSET(p[prev]) + sectors,
+ BB_LEN(p[prev]) - sectors,
+ BB_ACK(p[prev]));
+ cleared = sectors;
+ } else {
+ /* BB_LEN(p[prev]) <= sectors */
+ cleared = BB_LEN(p[prev]);
+ if ((prev + 1) < bb->count)
+ memmove(p + prev, p + prev + 1,
+ (bb->count - prev - 1) * 8);
+ *deleted = 1;
+ }
+ } else if (s > BB_OFFSET(p[prev])) {
+ if (BB_END(p[prev]) <= (s + sectors)) {
+ cleared = BB_END(p[prev]) - s;
+ p[prev] = BB_MAKE(BB_OFFSET(p[prev]),
+ s - BB_OFFSET(p[prev]),
+ BB_ACK(p[prev]));
+ } else {
+ /* Splitting is handled in front_splitting_clear() */
+ BUG();
+ }
+ }
+
+ return cleared;
+}
+
+/*
+ * Handle the condition that the clearing range hits middle of an already set
+ * bad block range from bad block table. In this condition the existing bad
+ * block range is split into two after the middle part is cleared.
+ */
+static int front_splitting_clear(struct badblocks *bb, int prev,
+ struct badblocks_context *bad)
+{
+ u64 *p = bb->page;
+ u64 end = BB_END(p[prev]);
+ int ack = BB_ACK(p[prev]);
+ sector_t sectors = bad->len;
+ sector_t s = bad->start;
+
+ p[prev] = BB_MAKE(BB_OFFSET(p[prev]),
+ s - BB_OFFSET(p[prev]),
+ ack);
+ memmove(p + prev + 2, p + prev + 1, (bb->count - prev - 1) * 8);
+ p[prev + 1] = BB_MAKE(s + sectors, end - s - sectors, ack);
+ return sectors;
+}
+
+/* Do the exact work to clear bad block range from the bad block table */
+static int _badblocks_clear(struct badblocks *bb, sector_t s, int sectors)
+{
+ struct badblocks_context bad;
+ int prev = -1, hint = -1;
+ int len = 0, cleared = 0;
int rv = 0;
+ u64 *p;
+
+ if (bb->shift < 0)
+ /* badblocks are disabled */
+ return 1;
+
+ if (sectors == 0)
+ /* Invalid sectors number */
+ return 1;
+
+ if (bb->shift) {
+ sector_t target;
- if (bb->shift > 0) {
/* When clearing we round the start up and the end down.
* This should not matter as the shift should align with
* the block size and no rounding should ever be needed.
* However it is better the think a block is bad when it
* isn't than to think a block is not bad when it is.
*/
- s += (1<<bb->shift) - 1;
- s >>= bb->shift;
- target >>= bb->shift;
+ target = s + sectors;
+ roundup(s, bb->shift);
+ rounddown(target, bb->shift);
+ sectors = target - s;
}
write_seqlock_irq(&bb->lock);
+ bad.ack = true;
p = bb->page;
- lo = 0;
- hi = bb->count;
- /* Find the last range that starts before 'target' */
- while (hi - lo > 1) {
- int mid = (lo + hi) / 2;
- sector_t a = BB_OFFSET(p[mid]);
- if (a < target)
- lo = mid;
- else
- hi = mid;
+re_clear:
+ bad.start = s;
+ bad.len = sectors;
+
+ if (badblocks_empty(bb)) {
+ len = sectors;
+ cleared++;
+ goto update_sectors;
}
- if (hi > lo) {
- /* p[lo] is the last range that could overlap the
- * current range. Earlier ranges could also overlap,
- * but only this one can overlap the end of the range.
- */
- if ((BB_OFFSET(p[lo]) + BB_LEN(p[lo]) > target) &&
- (BB_OFFSET(p[lo]) < target)) {
- /* Partial overlap, leave the tail of this range */
- int ack = BB_ACK(p[lo]);
- sector_t a = BB_OFFSET(p[lo]);
- sector_t end = a + BB_LEN(p[lo]);
-
- if (a < s) {
- /* we need to split this range */
- if (bb->count >= MAX_BADBLOCKS) {
- rv = -ENOSPC;
- goto out;
- }
- memmove(p+lo+1, p+lo, (bb->count - lo) * 8);
- bb->count++;
- p[lo] = BB_MAKE(a, s-a, ack);
- lo++;
- }
- p[lo] = BB_MAKE(target, end - target, ack);
- /* there is no longer an overlap */
- hi = lo;
- lo--;
- }
- while (lo >= 0 &&
- (BB_OFFSET(p[lo]) + BB_LEN(p[lo]) > s) &&
- (BB_OFFSET(p[lo]) < target)) {
- /* This range does overlap */
- if (BB_OFFSET(p[lo]) < s) {
- /* Keep the early parts of this range. */
- int ack = BB_ACK(p[lo]);
- sector_t start = BB_OFFSET(p[lo]);
-
- p[lo] = BB_MAKE(start, s - start, ack);
- /* now low doesn't overlap, so.. */
- break;
- }
- lo--;
+
+
+ prev = prev_badblocks(bb, &bad, hint);
+
+ /* Start before all badblocks */
+ if (prev < 0) {
+ if (overlap_behind(bb, &bad, 0)) {
+ len = BB_OFFSET(p[0]) - s;
+ hint = 0;
+ } else {
+ len = sectors;
}
- /* 'lo' is strictly before, 'hi' is strictly after,
- * anything between needs to be discarded
+ /*
+ * Both situations are to clear non-bad range,
+ * should be treated as successful
*/
- if (hi - lo > 1) {
- memmove(p+lo+1, p+hi, (bb->count - hi) * 8);
- bb->count -= (hi - lo - 1);
+ cleared++;
+ goto update_sectors;
+ }
+
+ /* Start after all badblocks */
+ if ((prev + 1) >= bb->count && !overlap_front(bb, prev, &bad)) {
+ len = sectors;
+ cleared++;
+ goto update_sectors;
+ }
+
+ /* Clear will split a bad record but the table is full */
+ if (badblocks_full(bb) && (BB_OFFSET(p[prev]) < bad.start) &&
+ (BB_END(p[prev]) > (bad.start + sectors))) {
+ len = sectors;
+ goto update_sectors;
+ }
+
+ if (overlap_front(bb, prev, &bad)) {
+ if ((BB_OFFSET(p[prev]) < bad.start) &&
+ (BB_END(p[prev]) > (bad.start + bad.len))) {
+ /* Splitting */
+ if ((bb->count + 1) < MAX_BADBLOCKS) {
+ len = front_splitting_clear(bb, prev, &bad);
+ bb->count += 1;
+ cleared++;
+ } else {
+ /* No space to split, give up */
+ len = sectors;
+ }
+ } else {
+ int deleted = 0;
+
+ len = front_clear(bb, prev, &bad, &deleted);
+ bb->count -= deleted;
+ cleared++;
+ hint = prev;
}
+
+ goto update_sectors;
+ }
+
+ /* Not front overlap, but behind overlap */
+ if ((prev + 1) < bb->count && overlap_behind(bb, &bad, prev + 1)) {
+ len = BB_OFFSET(p[prev + 1]) - bad.start;
+ hint = prev + 1;
+ /* Clear non-bad range should be treated as successful */
+ cleared++;
+ goto update_sectors;
+ }
+
+ /* Not cover any badblocks range in the table */
+ len = sectors;
+ /* Clear non-bad range should be treated as successful */
+ cleared++;
+
+update_sectors:
+ s += len;
+ sectors -= len;
+
+ if (sectors > 0)
+ goto re_clear;
+
+ WARN_ON(sectors < 0);
+
+ if (cleared) {
+ badblocks_update_acked(bb);
+ set_changed(bb);
}
- badblocks_update_acked(bb);
- bb->changed = 1;
-out:
write_sequnlock_irq(&bb->lock);
+
+ if (!cleared)
+ rv = 1;
+
return rv;
}
+
+/* Do the exact work to check bad blocks range from the bad block table */
+static int _badblocks_check(struct badblocks *bb, sector_t s, int sectors,
+ sector_t *first_bad, int *bad_sectors)
+{
+ int unacked_badblocks, acked_badblocks;
+ int prev = -1, hint = -1, set = 0;
+ struct badblocks_context bad;
+ unsigned int seq;
+ int len, rv;
+ u64 *p;
+
+ WARN_ON(bb->shift < 0 || sectors == 0);
+
+ if (bb->shift > 0) {
+ sector_t target;
+
+ /* round the start down, and the end up */
+ target = s + sectors;
+ rounddown(s, bb->shift);
+ roundup(target, bb->shift);
+ sectors = target - s;
+ }
+
+retry:
+ seq = read_seqbegin(&bb->lock);
+
+ p = bb->page;
+ unacked_badblocks = 0;
+ acked_badblocks = 0;
+
+re_check:
+ bad.start = s;
+ bad.len = sectors;
+
+ if (badblocks_empty(bb)) {
+ len = sectors;
+ goto update_sectors;
+ }
+
+ prev = prev_badblocks(bb, &bad, hint);
+
+ /* start after all badblocks */
+ if ((prev + 1) >= bb->count && !overlap_front(bb, prev, &bad)) {
+ len = sectors;
+ goto update_sectors;
+ }
+
+ if (overlap_front(bb, prev, &bad)) {
+ if (BB_ACK(p[prev]))
+ acked_badblocks++;
+ else
+ unacked_badblocks++;
+
+ if (BB_END(p[prev]) >= (s + sectors))
+ len = sectors;
+ else
+ len = BB_END(p[prev]) - s;
+
+ if (set == 0) {
+ *first_bad = BB_OFFSET(p[prev]);
+ *bad_sectors = BB_LEN(p[prev]);
+ set = 1;
+ }
+ goto update_sectors;
+ }
+
+ /* Not front overlap, but behind overlap */
+ if ((prev + 1) < bb->count && overlap_behind(bb, &bad, prev + 1)) {
+ len = BB_OFFSET(p[prev + 1]) - bad.start;
+ hint = prev + 1;
+ goto update_sectors;
+ }
+
+ /* not cover any badblocks range in the table */
+ len = sectors;
+
+update_sectors:
+ s += len;
+ sectors -= len;
+
+ if (sectors > 0)
+ goto re_check;
+
+ WARN_ON(sectors < 0);
+
+ if (unacked_badblocks > 0)
+ rv = -1;
+ else if (acked_badblocks > 0)
+ rv = 1;
+ else
+ rv = 0;
+
+ if (read_seqretry(&bb->lock, seq))
+ goto retry;
+
+ return rv;
+}
+
+/**
+ * badblocks_check() - check a given range for bad sectors
+ * @bb: the badblocks structure that holds all badblock information
+ * @s: sector (start) at which to check for badblocks
+ * @sectors: number of sectors to check for badblocks
+ * @first_bad: pointer to store location of the first badblock
+ * @bad_sectors: pointer to store number of badblocks after @first_bad
+ *
+ * We can record which blocks on each device are 'bad' and so just
+ * fail those blocks, or that stripe, rather than the whole device.
+ * Entries in the bad-block table are 64bits wide. This comprises:
+ * Length of bad-range, in sectors: 0-511 for lengths 1-512
+ * Start of bad-range, sector offset, 54 bits (allows 8 exbibytes)
+ * A 'shift' can be set so that larger blocks are tracked and
+ * consequently larger devices can be covered.
+ * 'Acknowledged' flag - 1 bit. - the most significant bit.
+ *
+ * Locking of the bad-block table uses a seqlock so badblocks_check
+ * might need to retry if it is very unlucky.
+ * We will sometimes want to check for bad blocks in a bi_end_io function,
+ * so we use the write_seqlock_irq variant.
+ *
+ * When looking for a bad block we specify a range and want to
+ * know if any block in the range is bad. So we binary-search
+ * to the last range that starts at-or-before the given endpoint,
+ * (or "before the sector after the target range")
+ * then see if it ends after the given start.
+ *
+ * Return:
+ * 0: there are no known bad blocks in the range
+ * 1: there are known bad block which are all acknowledged
+ * -1: there are bad blocks which have not yet been acknowledged in metadata.
+ * plus the start/length of the first bad section we overlap.
+ */
+int badblocks_check(struct badblocks *bb, sector_t s, int sectors,
+ sector_t *first_bad, int *bad_sectors)
+{
+ return _badblocks_check(bb, s, sectors, first_bad, bad_sectors);
+}
+EXPORT_SYMBOL_GPL(badblocks_check);
+
+/**
+ * badblocks_set() - Add a range of bad blocks to the table.
+ * @bb: the badblocks structure that holds all badblock information
+ * @s: first sector to mark as bad
+ * @sectors: number of sectors to mark as bad
+ * @acknowledged: weather to mark the bad sectors as acknowledged
+ *
+ * This might extend the table, or might contract it if two adjacent ranges
+ * can be merged. We binary-search to find the 'insertion' point, then
+ * decide how best to handle it.
+ *
+ * Return:
+ * 0: success
+ * 1: failed to set badblocks (out of space)
+ */
+int badblocks_set(struct badblocks *bb, sector_t s, int sectors,
+ int acknowledged)
+{
+ return _badblocks_set(bb, s, sectors, acknowledged);
+}
+EXPORT_SYMBOL_GPL(badblocks_set);
+
+/**
+ * badblocks_clear() - Remove a range of bad blocks to the table.
+ * @bb: the badblocks structure that holds all badblock information
+ * @s: first sector to mark as bad
+ * @sectors: number of sectors to mark as bad
+ *
+ * This may involve extending the table if we spilt a region,
+ * but it must not fail. So if the table becomes full, we just
+ * drop the remove request.
+ *
+ * Return:
+ * 0: success
+ * 1: failed to clear badblocks
+ */
+int badblocks_clear(struct badblocks *bb, sector_t s, int sectors)
+{
+ return _badblocks_clear(bb, s, sectors);
+}
EXPORT_SYMBOL_GPL(badblocks_clear);
/**
diff --git a/block/blk-flush.c b/block/blk-flush.c
index e73dc22d05c1..3f4d41952ef2 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -323,16 +323,9 @@ static void blk_kick_flush(struct request_queue *q, struct blk_flush_queue *fq,
flush_rq->mq_ctx = first_rq->mq_ctx;
flush_rq->mq_hctx = first_rq->mq_hctx;
- if (!q->elevator) {
+ if (!q->elevator)
flush_rq->tag = first_rq->tag;
-
- /*
- * We borrow data request's driver tag, so have to mark
- * this flush request as INFLIGHT for avoiding double
- * account of this driver tag
- */
- flush_rq->rq_flags |= RQF_MQ_INFLIGHT;
- } else
+ else
flush_rq->internal_tag = first_rq->internal_tag;
flush_rq->cmd_flags = REQ_OP_FLUSH | REQ_PREFLUSH;
diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c
index c3b5930106b2..5cbeb9344f2f 100644
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@@ -246,7 +246,6 @@ static const char *const rqf_name[] = {
RQF_NAME(STARTED),
RQF_NAME(FLUSH_SEQ),
RQF_NAME(MIXED_MERGE),
- RQF_NAME(MQ_INFLIGHT),
RQF_NAME(DONTPREP),
RQF_NAME(SCHED_TAGS),
RQF_NAME(USE_SCHED),
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 1fafd54dce3c..e2d11183f62e 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -426,6 +426,8 @@ __blk_mq_alloc_requests_batch(struct blk_mq_alloc_data *data)
rq_list_add(data->cached_rq, rq);
nr++;
}
+ if (!(data->rq_flags & RQF_SCHED_TAGS))
+ blk_mq_add_active_requests(data->hctx, nr);
/* caller already holds a reference, add for remainder */
percpu_ref_get_many(&data->q->q_usage_counter, nr - 1);
data->nr_tags -= nr;
@@ -510,6 +512,8 @@ retry:
goto retry;
}
+ if (!(data->rq_flags & RQF_SCHED_TAGS))
+ blk_mq_inc_active_requests(data->hctx);
rq = blk_mq_rq_ctx_init(data, blk_mq_tags_from_data(data), tag);
blk_mq_rq_time_init(rq, alloc_time_ns);
return rq;
@@ -669,6 +673,8 @@ struct request *blk_mq_alloc_request_hctx(struct request_queue *q,
tag = blk_mq_get_tag(&data);
if (tag == BLK_MQ_NO_TAG)
goto out_queue_exit;
+ if (!(data.rq_flags & RQF_SCHED_TAGS))
+ blk_mq_inc_active_requests(data.hctx);
rq = blk_mq_rq_ctx_init(&data, blk_mq_tags_from_data(&data), tag);
blk_mq_rq_time_init(rq, alloc_time_ns);
rq->__data_len = 0;
@@ -708,11 +714,10 @@ static void __blk_mq_free_request(struct request *rq)
blk_pm_mark_last_busy(rq);
rq->mq_hctx = NULL;
- if (rq->rq_flags & RQF_MQ_INFLIGHT)
- __blk_mq_dec_active_requests(hctx);
-
- if (rq->tag != BLK_MQ_NO_TAG)
+ if (rq->tag != BLK_MQ_NO_TAG) {
+ blk_mq_dec_active_requests(hctx);
blk_mq_put_tag(hctx->tags, ctx, rq->tag);
+ }
if (sched_tag != BLK_MQ_NO_TAG)
blk_mq_put_tag(hctx->sched_tags, ctx, sched_tag);
blk_mq_sched_restart(hctx);
@@ -1061,12 +1066,7 @@ static inline void blk_mq_flush_tag_batch(struct blk_mq_hw_ctx *hctx,
{
struct request_queue *q = hctx->queue;
- /*
- * All requests should have been marked as RQF_MQ_INFLIGHT, so
- * update hctx->nr_active in batch
- */
- if (hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED)
- __blk_mq_sub_active_requests(hctx, nr_tags);
+ blk_mq_sub_active_requests(hctx, nr_tags);
blk_mq_put_tags(hctx->tags, tag_array, nr_tags);
percpu_ref_put_many(&q->q_usage_counter, nr_tags);
@@ -1259,6 +1259,7 @@ void blk_mq_start_request(struct request *rq)
blk_add_timer(rq);
WRITE_ONCE(rq->state, MQ_RQ_IN_FLIGHT);
+ rq->mq_hctx->tags->rqs[rq->tag] = rq;
#ifdef CONFIG_BLK_DEV_INTEGRITY
if (blk_integrity_rq(rq) && req_op(rq) == REQ_OP_WRITE)
@@ -1748,7 +1749,7 @@ struct request *blk_mq_dequeue_from_ctx(struct blk_mq_hw_ctx *hctx,
return data.rq;
}
-static bool __blk_mq_alloc_driver_tag(struct request *rq)
+bool __blk_mq_alloc_driver_tag(struct request *rq)
{
struct sbitmap_queue *bt = &rq->mq_hctx->tags->bitmap_tags;
unsigned int tag_offset = rq->mq_hctx->tags->nr_reserved_tags;
@@ -1769,20 +1770,7 @@ static bool __blk_mq_alloc_driver_tag(struct request *rq)
return false;
rq->tag = tag + tag_offset;
- return true;
-}
-
-bool __blk_mq_get_driver_tag(struct blk_mq_hw_ctx *hctx, struct request *rq)
-{
- if (rq->tag == BLK_MQ_NO_TAG && !__blk_mq_alloc_driver_tag(rq))
- return false;
-
- if ((hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED) &&
- !(rq->rq_flags & RQF_MQ_INFLIGHT)) {
- rq->rq_flags |= RQF_MQ_INFLIGHT;
- __blk_mq_inc_active_requests(hctx);
- }
- hctx->tags->rqs[rq->tag] = rq;
+ blk_mq_inc_active_requests(rq->mq_hctx);
return true;
}
@@ -2794,13 +2782,8 @@ void blk_mq_flush_plug_list(struct blk_plug *plug, bool from_schedule)
* If we do, we can dispatch the whole plug list in one go. We
* already know at this point that all requests belong to the
* same queue, caller must ensure that's the case.
- *
- * Since we pass off the full list to the driver at this point,
- * we do not increment the active request count for the queue.
- * Bypass shared tags for now because of that.
*/
- if (q->mq_ops->queue_rqs &&
- !(rq->mq_hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED)) {
+ if (q->mq_ops->queue_rqs) {
blk_mq_run_dispatch_ops(q,
__blk_mq_flush_plug_list(q, plug));
if (rq_list_empty(plug->mq_list))
diff --git a/block/blk-mq.h b/block/blk-mq.h
index 1743857e0b01..f75a9ecfebde 100644
--- a/block/blk-mq.h
+++ b/block/blk-mq.h
@@ -271,12 +271,18 @@ static inline int blk_mq_get_rq_budget_token(struct request *rq)
return -1;
}
-static inline void __blk_mq_inc_active_requests(struct blk_mq_hw_ctx *hctx)
+static inline void __blk_mq_add_active_requests(struct blk_mq_hw_ctx *hctx,
+ int val)
{
if (blk_mq_is_shared_tags(hctx->flags))
- atomic_inc(&hctx->queue->nr_active_requests_shared_tags);
+ atomic_add(val, &hctx->queue->nr_active_requests_shared_tags);
else
- atomic_inc(&hctx->nr_active);
+ atomic_add(val, &hctx->nr_active);
+}
+
+static inline void __blk_mq_inc_active_requests(struct blk_mq_hw_ctx *hctx)
+{
+ __blk_mq_add_active_requests(hctx, 1);
}
static inline void __blk_mq_sub_active_requests(struct blk_mq_hw_ctx *hctx,
@@ -293,6 +299,32 @@ static inline void __blk_mq_dec_active_requests(struct blk_mq_hw_ctx *hctx)
__blk_mq_sub_active_requests(hctx, 1);
}
+static inline void blk_mq_add_active_requests(struct blk_mq_hw_ctx *hctx,
+ int val)
+{
+ if (hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED)
+ __blk_mq_add_active_requests(hctx, val);
+}
+
+static inline void blk_mq_inc_active_requests(struct blk_mq_hw_ctx *hctx)
+{
+ if (hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED)
+ __blk_mq_inc_active_requests(hctx);
+}
+
+static inline void blk_mq_sub_active_requests(struct blk_mq_hw_ctx *hctx,
+ int val)
+{
+ if (hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED)
+ __blk_mq_sub_active_requests(hctx, val);
+}
+
+static inline void blk_mq_dec_active_requests(struct blk_mq_hw_ctx *hctx)
+{
+ if (hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED)
+ __blk_mq_dec_active_requests(hctx);
+}
+
static inline int __blk_mq_active_requests(struct blk_mq_hw_ctx *hctx)
{
if (blk_mq_is_shared_tags(hctx->flags))
@@ -302,13 +334,9 @@ static inline int __blk_mq_active_requests(struct blk_mq_hw_ctx *hctx)
static inline void __blk_mq_put_driver_tag(struct blk_mq_hw_ctx *hctx,
struct request *rq)
{
+ blk_mq_dec_active_requests(hctx);
blk_mq_put_tag(hctx->tags, rq->mq_ctx, rq->tag);
rq->tag = BLK_MQ_NO_TAG;
-
- if (rq->rq_flags & RQF_MQ_INFLIGHT) {
- rq->rq_flags &= ~RQF_MQ_INFLIGHT;
- __blk_mq_dec_active_requests(hctx);
- }
}
static inline void blk_mq_put_driver_tag(struct request *rq)
@@ -319,19 +347,14 @@ static inline void blk_mq_put_driver_tag(struct request *rq)
__blk_mq_put_driver_tag(rq->mq_hctx, rq);
}
-bool __blk_mq_get_driver_tag(struct blk_mq_hw_ctx *hctx, struct request *rq);
+bool __blk_mq_alloc_driver_tag(struct request *rq);
static inline bool blk_mq_get_driver_tag(struct request *rq)
{
- struct blk_mq_hw_ctx *hctx = rq->mq_hctx;
-
- if (rq->tag != BLK_MQ_NO_TAG &&
- !(hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED)) {
- hctx->tags->rqs[rq->tag] = rq;
- return true;
- }
+ if (rq->tag == BLK_MQ_NO_TAG && !__blk_mq_alloc_driver_tag(rq))
+ return false;
- return __blk_mq_get_driver_tag(hctx, rq);
+ return true;
}
static inline void blk_mq_clear_mq_map(struct blk_mq_queue_map *qmap)
diff --git a/block/partitions/ibm.c b/block/partitions/ibm.c
index 403756dbd50d..82d9c4c3fb41 100644
--- a/block/partitions/ibm.c
+++ b/block/partitions/ibm.c
@@ -61,6 +61,47 @@ static sector_t cchhb2blk(struct vtoc_cchhb *ptr, struct hd_geometry *geo)
ptr->b;
}
+/* Volume Label Type/ID Length */
+#define DASD_VOL_TYPE_LEN 4
+#define DASD_VOL_ID_LEN 6
+
+/* Volume Label Types */
+#define DASD_VOLLBL_TYPE_VOL1 0
+#define DASD_VOLLBL_TYPE_LNX1 1
+#define DASD_VOLLBL_TYPE_CMS1 2
+
+struct dasd_vollabel {
+ char *type;
+ int idx;
+};
+
+static struct dasd_vollabel dasd_vollabels[] = {
+ [DASD_VOLLBL_TYPE_VOL1] = {
+ .type = "VOL1",
+ .idx = DASD_VOLLBL_TYPE_VOL1,
+ },
+ [DASD_VOLLBL_TYPE_LNX1] = {
+ .type = "LNX1",
+ .idx = DASD_VOLLBL_TYPE_LNX1,
+ },
+ [DASD_VOLLBL_TYPE_CMS1] = {
+ .type = "CMS1",
+ .idx = DASD_VOLLBL_TYPE_CMS1,
+ },
+};
+
+static int get_label_by_type(const char *type)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dasd_vollabels); i++) {
+ if (!memcmp(type, dasd_vollabels[i].type, DASD_VOL_TYPE_LEN))
+ return dasd_vollabels[i].idx;
+ }
+
+ return -1;
+}
+
static int find_label(struct parsed_partitions *state,
dasd_information2_t *info,
struct hd_geometry *geo,
@@ -70,12 +111,10 @@ static int find_label(struct parsed_partitions *state,
char type[],
union label_t *label)
{
- Sector sect;
- unsigned char *data;
sector_t testsect[3];
- unsigned char temp[5];
- int found = 0;
int i, testcount;
+ Sector sect;
+ void *data;
/* There a three places where we may find a valid label:
* - on an ECKD disk it's block 2
@@ -103,31 +142,27 @@ static int find_label(struct parsed_partitions *state,
if (data == NULL)
continue;
memcpy(label, data, sizeof(*label));
- memcpy(temp, data, 4);
- temp[4] = 0;
- EBCASC(temp, 4);
+ memcpy(type, data, DASD_VOL_TYPE_LEN);
+ EBCASC(type, DASD_VOL_TYPE_LEN);
put_dev_sector(sect);
- if (!strcmp(temp, "VOL1") ||
- !strcmp(temp, "LNX1") ||
- !strcmp(temp, "CMS1")) {
- if (!strcmp(temp, "VOL1")) {
- strncpy(type, label->vol.vollbl, 4);
- strncpy(name, label->vol.volid, 6);
- } else {
- strncpy(type, label->lnx.vollbl, 4);
- strncpy(name, label->lnx.volid, 6);
- }
- EBCASC(type, 4);
- EBCASC(name, 6);
+ switch (get_label_by_type(type)) {
+ case DASD_VOLLBL_TYPE_VOL1:
+ memcpy(name, label->vol.volid, DASD_VOL_ID_LEN);
+ EBCASC(name, DASD_VOL_ID_LEN);
+ *labelsect = testsect[i];
+ return 1;
+ case DASD_VOLLBL_TYPE_LNX1:
+ case DASD_VOLLBL_TYPE_CMS1:
+ memcpy(name, label->lnx.volid, DASD_VOL_ID_LEN);
+ EBCASC(name, DASD_VOL_ID_LEN);
*labelsect = testsect[i];
- found = 1;
+ return 1;
+ default:
break;
}
}
- if (!found)
- memset(label, 0, sizeof(*label));
- return found;
+ return 0;
}
static int find_vol1_partitions(struct parsed_partitions *state,
@@ -297,8 +332,8 @@ int ibm_partition(struct parsed_partitions *state)
sector_t nr_sectors;
dasd_information2_t *info;
struct hd_geometry *geo;
- char type[5] = {0,};
- char name[7] = {0,};
+ char type[DASD_VOL_TYPE_LEN + 1] = "";
+ char name[DASD_VOL_ID_LEN + 1] = "";
sector_t labelsect;
union label_t *label;
@@ -330,18 +365,21 @@ int ibm_partition(struct parsed_partitions *state)
info = NULL;
}
- if (find_label(state, info, geo, blocksize, &labelsect, name, type,
- label)) {
- if (!strncmp(type, "VOL1", 4)) {
+ if (find_label(state, info, geo, blocksize, &labelsect, name, type, label)) {
+ switch (get_label_by_type(type)) {
+ case DASD_VOLLBL_TYPE_VOL1:
res = find_vol1_partitions(state, geo, blocksize, name,
label);
- } else if (!strncmp(type, "LNX1", 4)) {
+ break;
+ case DASD_VOLLBL_TYPE_LNX1:
res = find_lnx1_partitions(state, geo, blocksize, name,
label, labelsect, nr_sectors,
info);
- } else if (!strncmp(type, "CMS1", 4)) {
+ break;
+ case DASD_VOLLBL_TYPE_CMS1:
res = find_cms1_partitions(state, geo, blocksize, name,
label, labelsect);
+ break;
}
} else if (info) {
/*
diff --git a/block/sed-opal.c b/block/sed-opal.c
index 04f38a3f5d95..3d9e9cd250bd 100644
--- a/block/sed-opal.c
+++ b/block/sed-opal.c
@@ -18,6 +18,7 @@
#include <linux/uaccess.h>
#include <uapi/linux/sed-opal.h>
#include <linux/sed-opal.h>
+#include <linux/sed-opal-key.h>
#include <linux/string.h>
#include <linux/kdev_t.h>
#include <linux/key.h>
@@ -3018,7 +3019,13 @@ static int opal_set_new_pw(struct opal_dev *dev, struct opal_new_pw *opal_pw)
if (ret)
return ret;
- /* update keyring with new password */
+ /* update keyring and key store with new password */
+ ret = sed_write_key(OPAL_AUTH_KEY,
+ opal_pw->new_user_pw.opal_key.key,
+ opal_pw->new_user_pw.opal_key.key_len);
+ if (ret != -EOPNOTSUPP)
+ pr_warn("error updating SED key: %d\n", ret);
+
ret = update_sed_opal_key(OPAL_AUTH_KEY,
opal_pw->new_user_pw.opal_key.key,
opal_pw->new_user_pw.opal_key.key_len);
@@ -3291,6 +3298,8 @@ EXPORT_SYMBOL_GPL(sed_ioctl);
static int __init sed_opal_init(void)
{
struct key *kr;
+ char init_sed_key[OPAL_KEY_MAX];
+ int keylen = OPAL_KEY_MAX - 1;
kr = keyring_alloc(".sed_opal",
GLOBAL_ROOT_UID, GLOBAL_ROOT_GID, current_cred(),
@@ -3303,6 +3312,11 @@ static int __init sed_opal_init(void)
sed_opal_keyring = kr;
- return 0;
+ if (sed_read_key(OPAL_AUTH_KEY, init_sed_key, &keylen) < 0) {
+ memset(init_sed_key, '\0', sizeof(init_sed_key));
+ keylen = OPAL_KEY_MAX - 1;
+ }
+
+ return update_sed_opal_key(OPAL_AUTH_KEY, init_sed_key, keylen);
}
late_initcall(sed_opal_init);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 16:41:29 +0000