diff options
Diffstat (limited to 'arch/x86/include/asm/numaq.h')
| -rw-r--r-- | arch/x86/include/asm/numaq.h | 171 |
1 files changed, 0 insertions, 171 deletions
diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h deleted file mode 100644 index c3b3c322fd87..000000000000 --- a/arch/x86/include/asm/numaq.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Written by: Patricia Gaughen, IBM Corporation - * - * Copyright (C) 2002, IBM Corp. - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to <gone@us.ibm.com> - */ - -#ifndef _ASM_X86_NUMAQ_H -#define _ASM_X86_NUMAQ_H - -#ifdef CONFIG_X86_NUMAQ - -extern int found_numaq; -extern int numaq_numa_init(void); -extern int pci_numaq_init(void); - -extern void *xquad_portio; - -#define XQUAD_PORTIO_BASE 0xfe400000 -#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ -#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) - -/* - * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the - */ -#define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private - quad space */ - -/* - * Communication area for each processor on lynxer-processor tests. - * - * NOTE: If you change the size of this eachproc structure you need - * to change the definition for EACH_QUAD_SIZE. - */ -struct eachquadmem { - unsigned int priv_mem_start; /* Starting address of this */ - /* quad's private memory. */ - /* This is always 0. */ - /* In MB. */ - unsigned int priv_mem_size; /* Size of this quad's */ - /* private memory. */ - /* In MB. */ - unsigned int low_shrd_mem_strp_start;/* Starting address of this */ - /* quad's low shared block */ - /* (untranslated). */ - /* In MB. */ - unsigned int low_shrd_mem_start; /* Starting address of this */ - /* quad's low shared memory */ - /* (untranslated). */ - /* In MB. */ - unsigned int low_shrd_mem_size; /* Size of this quad's low */ - /* shared memory. */ - /* In MB. */ - unsigned int lmmio_copb_start; /* Starting address of this */ - /* quad's local memory */ - /* mapped I/O in the */ - /* compatibility OPB. */ - /* In MB. */ - unsigned int lmmio_copb_size; /* Size of this quad's local */ - /* memory mapped I/O in the */ - /* compatibility OPB. */ - /* In MB. */ - unsigned int lmmio_nopb_start; /* Starting address of this */ - /* quad's local memory */ - /* mapped I/O in the */ - /* non-compatibility OPB. */ - /* In MB. */ - unsigned int lmmio_nopb_size; /* Size of this quad's local */ - /* memory mapped I/O in the */ - /* non-compatibility OPB. */ - /* In MB. */ - unsigned int io_apic_0_start; /* Starting address of I/O */ - /* APIC 0. */ - unsigned int io_apic_0_sz; /* Size I/O APIC 0. */ - unsigned int io_apic_1_start; /* Starting address of I/O */ - /* APIC 1. */ - unsigned int io_apic_1_sz; /* Size I/O APIC 1. */ - unsigned int hi_shrd_mem_start; /* Starting address of this */ - /* quad's high shared memory.*/ - /* In MB. */ - unsigned int hi_shrd_mem_size; /* Size of this quad's high */ - /* shared memory. */ - /* In MB. */ - unsigned int mps_table_addr; /* Address of this quad's */ - /* MPS tables from BIOS, */ - /* in system space.*/ - unsigned int lcl_MDC_pio_addr; /* Port-I/O address for */ - /* local access of MDC. */ - unsigned int rmt_MDC_mmpio_addr; /* MM-Port-I/O address for */ - /* remote access of MDC. */ - unsigned int mm_port_io_start; /* Starting address of this */ - /* quad's memory mapped Port */ - /* I/O space. */ - unsigned int mm_port_io_size; /* Size of this quad's memory*/ - /* mapped Port I/O space. */ - unsigned int mm_rmt_io_apic_start; /* Starting address of this */ - /* quad's memory mapped */ - /* remote I/O APIC space. */ - unsigned int mm_rmt_io_apic_size; /* Size of this quad's memory*/ - /* mapped remote I/O APIC */ - /* space. */ - unsigned int mm_isa_start; /* Starting address of this */ - /* quad's memory mapped ISA */ - /* space (contains MDC */ - /* memory space). */ - unsigned int mm_isa_size; /* Size of this quad's memory*/ - /* mapped ISA space (contains*/ - /* MDC memory space). */ - unsigned int rmt_qmi_addr; /* Remote addr to access QMI.*/ - unsigned int lcl_qmi_addr; /* Local addr to access QMI. */ -}; - -/* - * Note: This structure must be NOT be changed unless the multiproc and - * OS are changed to reflect the new structure. - */ -struct sys_cfg_data { - unsigned int quad_id; - unsigned int bsp_proc_id; /* Boot Strap Processor in this quad. */ - unsigned int scd_version; /* Version number of this table. */ - unsigned int first_quad_id; - unsigned int quads_present31_0; /* 1 bit for each quad */ - unsigned int quads_present63_32; /* 1 bit for each quad */ - unsigned int config_flags; - unsigned int boot_flags; - unsigned int csr_start_addr; /* Absolute value (not in MB) */ - unsigned int csr_size; /* Absolute value (not in MB) */ - unsigned int lcl_apic_start_addr; /* Absolute value (not in MB) */ - unsigned int lcl_apic_size; /* Absolute value (not in MB) */ - unsigned int low_shrd_mem_base; /* 0 or 512MB or 1GB */ - unsigned int low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */ - /* may not be totally populated */ - unsigned int split_mem_enbl; /* 0 for no low shared memory */ - unsigned int mmio_sz; /* Size of total system memory mapped I/O */ - /* (in MB). */ - unsigned int quad_spin_lock; /* Spare location used for quad */ - /* bringup. */ - unsigned int nonzero55; /* For checksumming. */ - unsigned int nonzeroaa; /* For checksumming. */ - unsigned int scd_magic_number; - unsigned int system_type; - unsigned int checksum; - /* - * memory configuration area for each quad - */ - struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */ -}; - -void numaq_tsc_disable(void); - -#endif /* CONFIG_X86_NUMAQ */ -#endif /* _ASM_X86_NUMAQ_H */ - |