diff options
Diffstat (limited to 'arch/powerpc/kernel/eeh_driver.c')
-rw-r--r-- | arch/powerpc/kernel/eeh_driver.c | 162 |
1 files changed, 80 insertions, 82 deletions
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 350dab18e137..422f80b5b27b 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -905,18 +905,19 @@ void eeh_handle_normal_event(struct eeh_pe *pe) } #endif /* CONFIG_STACKTRACE */ + eeh_for_each_pe(pe, tmp_pe) + eeh_pe_for_each_dev(tmp_pe, edev, tmp) + edev->mode &= ~EEH_DEV_NO_HANDLER; + eeh_pe_update_time_stamp(pe); pe->freeze_count++; if (pe->freeze_count > eeh_max_freezes) { pr_err("EEH: PHB#%x-PE#%x has failed %d times in the last hour and has been permanently disabled.\n", pe->phb->global_number, pe->addr, pe->freeze_count); - result = PCI_ERS_RESULT_DISCONNECT; - } - eeh_for_each_pe(pe, tmp_pe) - eeh_pe_for_each_dev(tmp_pe, edev, tmp) - edev->mode &= ~EEH_DEV_NO_HANDLER; + goto recover_failed; + } /* Walk the various device drivers attached to this slot through * a reset sequence, giving each an opportunity to do what it needs @@ -928,39 +929,38 @@ void eeh_handle_normal_event(struct eeh_pe *pe) * the error. Override the result if necessary to have partially * hotplug for this case. */ - if (result != PCI_ERS_RESULT_DISCONNECT) { - pr_warn("EEH: This PCI device has failed %d times in the last hour and will be permanently disabled after %d failures.\n", - pe->freeze_count, eeh_max_freezes); - pr_info("EEH: Notify device drivers to shutdown\n"); - eeh_set_channel_state(pe, pci_channel_io_frozen); - eeh_set_irq_state(pe, false); - eeh_pe_report("error_detected(IO frozen)", pe, - eeh_report_error, &result); - if ((pe->type & EEH_PE_PHB) && - result != PCI_ERS_RESULT_NONE && - result != PCI_ERS_RESULT_NEED_RESET) - result = PCI_ERS_RESULT_NEED_RESET; - } + pr_warn("EEH: This PCI device has failed %d times in the last hour and will be permanently disabled after %d failures.\n", + pe->freeze_count, eeh_max_freezes); + pr_info("EEH: Notify device drivers to shutdown\n"); + eeh_set_channel_state(pe, pci_channel_io_frozen); + eeh_set_irq_state(pe, false); + eeh_pe_report("error_detected(IO frozen)", pe, + eeh_report_error, &result); + if (result == PCI_ERS_RESULT_DISCONNECT) + goto recover_failed; + + /* + * Error logged on a PHB are always fences which need a full + * PHB reset to clear so force that to happen. + */ + if ((pe->type & EEH_PE_PHB) && result != PCI_ERS_RESULT_NONE) + result = PCI_ERS_RESULT_NEED_RESET; /* Get the current PCI slot state. This can take a long time, * sometimes over 300 seconds for certain systems. */ - if (result != PCI_ERS_RESULT_DISCONNECT) { - rc = eeh_wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000); - if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) { - pr_warn("EEH: Permanent failure\n"); - result = PCI_ERS_RESULT_DISCONNECT; - } + rc = eeh_wait_state(pe, MAX_WAIT_FOR_RECOVERY * 1000); + if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) { + pr_warn("EEH: Permanent failure\n"); + goto recover_failed; } /* Since rtas may enable MMIO when posting the error log, * don't post the error log until after all dev drivers * have been informed. */ - if (result != PCI_ERS_RESULT_DISCONNECT) { - pr_info("EEH: Collect temporary log\n"); - eeh_slot_error_detail(pe, EEH_LOG_TEMP); - } + pr_info("EEH: Collect temporary log\n"); + eeh_slot_error_detail(pe, EEH_LOG_TEMP); /* If all device drivers were EEH-unaware, then shut * down all of the device drivers, and hope they @@ -970,9 +970,8 @@ void eeh_handle_normal_event(struct eeh_pe *pe) pr_info("EEH: Reset with hotplug activity\n"); rc = eeh_reset_device(pe, bus, NULL, false); if (rc) { - pr_warn("%s: Unable to reset, err=%d\n", - __func__, rc); - result = PCI_ERS_RESULT_DISCONNECT; + pr_warn("%s: Unable to reset, err=%d\n", __func__, rc); + goto recover_failed; } } @@ -980,10 +979,10 @@ void eeh_handle_normal_event(struct eeh_pe *pe) if (result == PCI_ERS_RESULT_CAN_RECOVER) { pr_info("EEH: Enable I/O for affected devices\n"); rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); + if (rc < 0) + goto recover_failed; - if (rc < 0) { - result = PCI_ERS_RESULT_DISCONNECT; - } else if (rc) { + if (rc) { result = PCI_ERS_RESULT_NEED_RESET; } else { pr_info("EEH: Notify device drivers to resume I/O\n"); @@ -991,15 +990,13 @@ void eeh_handle_normal_event(struct eeh_pe *pe) eeh_report_mmio_enabled, &result); } } - - /* If all devices reported they can proceed, then re-enable DMA */ if (result == PCI_ERS_RESULT_CAN_RECOVER) { pr_info("EEH: Enabled DMA for affected devices\n"); rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA); + if (rc < 0) + goto recover_failed; - if (rc < 0) { - result = PCI_ERS_RESULT_DISCONNECT; - } else if (rc) { + if (rc) { result = PCI_ERS_RESULT_NEED_RESET; } else { /* @@ -1017,16 +1014,15 @@ void eeh_handle_normal_event(struct eeh_pe *pe) pr_info("EEH: Reset without hotplug activity\n"); rc = eeh_reset_device(pe, bus, &rmv_data, true); if (rc) { - pr_warn("%s: Cannot reset, err=%d\n", - __func__, rc); - result = PCI_ERS_RESULT_DISCONNECT; - } else { - result = PCI_ERS_RESULT_NONE; - eeh_set_channel_state(pe, pci_channel_io_normal); - eeh_set_irq_state(pe, true); - eeh_pe_report("slot_reset", pe, eeh_report_reset, - &result); + pr_warn("%s: Cannot reset, err=%d\n", __func__, rc); + goto recover_failed; } + + result = PCI_ERS_RESULT_NONE; + eeh_set_channel_state(pe, pci_channel_io_normal); + eeh_set_irq_state(pe, true); + eeh_pe_report("slot_reset", pe, eeh_report_reset, + &result); } if ((result == PCI_ERS_RESULT_RECOVERED) || @@ -1054,45 +1050,47 @@ void eeh_handle_normal_event(struct eeh_pe *pe) } pr_info("EEH: Recovery successful.\n"); - } else { - /* - * About 90% of all real-life EEH failures in the field - * are due to poorly seated PCI cards. Only 10% or so are - * due to actual, failed cards. - */ - pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n" - "Please try reseating or replacing it\n", - pe->phb->global_number, pe->addr); + goto out; + } - eeh_slot_error_detail(pe, EEH_LOG_PERM); +recover_failed: + /* + * About 90% of all real-life EEH failures in the field + * are due to poorly seated PCI cards. Only 10% or so are + * due to actual, failed cards. + */ + pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n" + "Please try reseating or replacing it\n", + pe->phb->global_number, pe->addr); - /* Notify all devices that they're about to go down. */ - eeh_set_channel_state(pe, pci_channel_io_perm_failure); - eeh_set_irq_state(pe, false); - eeh_pe_report("error_detected(permanent failure)", pe, - eeh_report_failure, NULL); + eeh_slot_error_detail(pe, EEH_LOG_PERM); - /* Mark the PE to be removed permanently */ - eeh_pe_state_mark(pe, EEH_PE_REMOVED); + /* Notify all devices that they're about to go down. */ + eeh_set_channel_state(pe, pci_channel_io_perm_failure); + eeh_set_irq_state(pe, false); + eeh_pe_report("error_detected(permanent failure)", pe, + eeh_report_failure, NULL); - /* - * Shut down the device drivers for good. We mark - * all removed devices correctly to avoid access - * the their PCI config any more. - */ - if (pe->type & EEH_PE_VF) { - eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL); - eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); - } else { - eeh_pe_state_clear(pe, EEH_PE_PRI_BUS, true); - eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); + /* Mark the PE to be removed permanently */ + eeh_pe_state_mark(pe, EEH_PE_REMOVED); - pci_lock_rescan_remove(); - pci_hp_remove_devices(bus); - pci_unlock_rescan_remove(); - /* The passed PE should no longer be used */ - return; - } + /* + * Shut down the device drivers for good. We mark + * all removed devices correctly to avoid access + * the their PCI config any more. + */ + if (pe->type & EEH_PE_VF) { + eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL); + eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); + } else { + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS, true); + eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); + + pci_lock_rescan_remove(); + pci_hp_remove_devices(bus); + pci_unlock_rescan_remove(); + /* The passed PE should no longer be used */ + return; } out: |