diff options
Diffstat (limited to 'arch/mips/boot/dts/ingenic/ci20.dts')
| -rw-r--r-- | arch/mips/boot/dts/ingenic/ci20.dts | 63 |
1 files changed, 47 insertions, 16 deletions
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 37b93166bf22..db0ca250bd1a 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -4,6 +4,9 @@ #include "jz4780.dtsi" #include <dt-bindings/clock/ingenic,tcu.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/regulator/active-semi,8865-regulator.h> / { compatible = "img,ci20", "ingenic,jz4780"; @@ -25,6 +28,17 @@ 0x30000000 0x30000000>; }; + gpio-keys { + compatible = "gpio-keys"; + + sw1 { + label = "ci20:sw1"; + linux,code = <KEY_F13>; + gpios = <&gpd 17 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + }; + leds { compatible = "gpio-leds"; @@ -56,10 +70,17 @@ eth0_power: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "eth0_power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; gpio = <&gpb 25 GPIO_ACTIVE_LOW>; enable-active-high; }; + ir: ir { + compatible = "gpio-ir-receiver"; + gpios = <&gpe 3 GPIO_ACTIVE_LOW>; + }; + wlan0_power: fixedregulator@1 { compatible = "regulator-fixed"; regulator-name = "wlan0_power"; @@ -163,63 +184,71 @@ regulators { vddcore: SUDCDC1 { - regulator-name = "VDDCORE"; + regulator-name = "DCDC_REG1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; vddmem: SUDCDC2 { - regulator-name = "VDDMEM"; + regulator-name = "DCDC_REG2"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; vcc_33: SUDCDC3 { - regulator-name = "VCC33"; + regulator-name = "DCDC_REG3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_50: SUDCDC4 { - regulator-name = "VCC50"; + regulator-name = "SUDCDC_REG4"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; vcc_25: LDO_REG5 { - regulator-name = "VCC25"; + regulator-name = "LDO_REG5"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; wifi_io: LDO_REG6 { - regulator-name = "WIFIIO"; + regulator-name = "LDO_REG6"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; vcc_28: LDO_REG7 { - regulator-name = "VCC28"; + regulator-name = "LDO_REG7"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; vcc_15: LDO_REG8 { - regulator-name = "VCC15"; + regulator-name = "LDO_REG8"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; - vcc_18: LDO_REG9 { - regulator-name = "VCC18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vrtc_18: LDO_REG9 { + regulator-name = "LDO_REG9"; + /* Despite the datasheet stating 3.3V + * for REG9 and the driver expecting that, + * REG9 outputs 1.8V. + * Likely the CI20 uses a proprietary + * factory programmed chip variant. + * Since this is a simple on/off LDO the + * exact values do not matter. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_11: LDO_REG10 { - regulator-name = "VCC11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-name = "LDO_REG10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; }; }; @@ -261,7 +290,9 @@ rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; - interrupts = <110>; + + interrupt-parent = <&gpf>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; }; }; |