diff options
Diffstat (limited to 'arch/frv/kernel/sleep.S')
| -rw-r--r-- | arch/frv/kernel/sleep.S | 373 |
1 files changed, 0 insertions, 373 deletions
diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S deleted file mode 100644 index f67bf73cd2cc..000000000000 --- a/arch/frv/kernel/sleep.S +++ /dev/null @@ -1,373 +0,0 @@ -/* sleep.S: power saving mode entry - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@infradead.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/sys.h> -#include <linux/linkage.h> -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/ptrace.h> -#include <asm/errno.h> -#include <asm/cache.h> -#include <asm/spr-regs.h> - -#define __addr_MASK 0xfeff9820 /* interrupt controller mask */ - -#define __addr_FR55X_DRCN 0xfeff0218 /* Address of DRCN register */ -#define FR55X_DSTS_OFFSET -4 /* Offset from DRCN to DSTS */ -#define FR55X_SDRAMC_DSTS_SSI 0x00000002 /* indicates that the SDRAM is in self-refresh mode */ - -#define __addr_FR4XX_DRCN 0xfe000430 /* Address of DRCN register */ -#define FR4XX_DSTS_OFFSET -8 /* Offset from DRCN to DSTS */ -#define FR4XX_SDRAMC_DSTS_SSI 0x00000001 /* indicates that the SDRAM is in self-refresh mode */ - -#define SDRAMC_DRCN_SR 0x00000001 /* transition SDRAM into self-refresh mode */ - - .section .bss - .balign 8 - .globl __sleep_save_area -__sleep_save_area: - .space 16 - - - .text - .balign 4 - -.macro li v r - sethi.p %hi(\v),\r - setlo %lo(\v),\r -.endm - -#ifdef CONFIG_PM -############################################################################### -# -# CPU suspension routine -# - void frv_cpu_suspend(unsigned long pdm_mode) -# -############################################################################### - .globl frv_cpu_suspend - .type frv_cpu_suspend,@function -frv_cpu_suspend: - - #---------------------------------------------------- - # save hsr0, psr, isr, and lr for resume code - #---------------------------------------------------- - li __sleep_save_area,gr11 - - movsg hsr0,gr4 - movsg psr,gr5 - movsg isr,gr6 - movsg lr,gr7 - stdi gr4,@(gr11,#0) - stdi gr6,@(gr11,#8) - - # store the return address from sleep in GR14, and its complement in GR13 as a check - li __ramboot_resume,gr14 -#ifdef CONFIG_MMU - # Resume via RAMBOOT# will turn MMU off, so bootloader needs a physical address. - sethi.p %hi(__page_offset),gr13 - setlo %lo(__page_offset),gr13 - sub gr14,gr13,gr14 -#endif - not gr14,gr13 - - #---------------------------------------------------- - # preload and lock into icache that code which may have to run - # when dram is in self-refresh state. - #---------------------------------------------------- - movsg hsr0, gr3 - li HSR0_ICE,gr4 - or gr3,gr4,gr3 - movgs gr3,hsr0 - or gr3,gr8,gr7 // add the sleep bits for later - - li #__icache_lock_start,gr3 - li #__icache_lock_end,gr4 -1: icpl gr3,gr0,#1 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,1b - - # disable exceptions - movsg psr,gr8 - andi.p gr8,#~PSR_PIL,gr8 - andi gr8,~PSR_ET,gr8 - movgs gr8,psr - ori gr8,#PSR_ET,gr8 - - srli gr8,#28,gr4 - subicc gr4,#3,gr0,icc0 - beq icc0,#0,1f - # FR4xx - li __addr_FR4XX_DRCN,gr4 - li FR4XX_SDRAMC_DSTS_SSI,gr5 - li FR4XX_DSTS_OFFSET,gr6 - bra __icache_lock_start -1: - # FR5xx - li __addr_FR55X_DRCN,gr4 - li FR55X_SDRAMC_DSTS_SSI,gr5 - li FR55X_DSTS_OFFSET,gr6 - bra __icache_lock_start - - .size frv_cpu_suspend, .-frv_cpu_suspend - -# -# the final part of the sleep sequence... -# - we want it to be be cacheline aligned so we can lock it into the icache easily -# On entry: gr7 holds desired hsr0 sleep value -# gr8 holds desired psr sleep value -# - .balign L1_CACHE_BYTES - .type __icache_lock_start,@function -__icache_lock_start: - - #---------------------------------------------------- - # put SDRAM in self-refresh mode - #---------------------------------------------------- - - # Flush all data in the cache using the DCEF instruction. - dcef @(gr0,gr0),#1 - - # Stop DMAC transfer - - # Execute dummy load from SDRAM - ldi @(gr11,#0),gr11 - - # put the SDRAM into self-refresh mode - ld @(gr4,gr0),gr11 - ori gr11,#SDRAMC_DRCN_SR,gr11 - st gr11,@(gr4,gr0) - membar - - # wait for SDRAM to reach self-refresh mode -1: ld @(gr4,gr6),gr11 - andcc gr11,gr5,gr11,icc0 - beq icc0,#0,1b - - # Set the GPIO register so that the IRQ[3:0] pins become valid, as required. - # Set the clock mode (CLKC register) as required. - # - At this time, also set the CLKC register P0 bit. - - # Set the HSR0 register PDM field. - movgs gr7,hsr0 - - # Execute NOP 32 times. - .rept 32 - nop - .endr - -#if 0 // Fujitsu recommend to skip this and will update docs. - # Release the interrupt mask setting of the MASK register of the - # interrupt controller if necessary. - sti gr10,@(gr9,#0) - membar -#endif - - # Set the PSR register ET bit to 1 to enable interrupts. - movgs gr8,psr - - ################################################### - # this is only reached if waking up via interrupt - ################################################### - - # Execute NOP 32 times. - .rept 32 - nop - .endr - - #---------------------------------------------------- - # wake SDRAM from self-refresh mode - #---------------------------------------------------- - ld @(gr4,gr0),gr11 - andi gr11,#~SDRAMC_DRCN_SR,gr11 - st gr11,@(gr4,gr0) - membar -2: - ld @(gr4,gr6),gr11 // Wait for it to come back... - andcc gr11,gr5,gr0,icc0 - bne icc0,0,2b - - # wait for the SDRAM to stabilise - li 0x0100000,gr3 -3: subicc gr3,#1,gr3,icc0 - bne icc0,#0,3b - - # now that DRAM is back, this is the end of the code which gets - # locked in icache. -__icache_lock_end: - .size __icache_lock_start, .-__icache_lock_start - - # Fall-through to the RAMBOOT# wakeup path - -############################################################################### -# -# resume from suspend re-entry point reached via RAMBOOT# and bootloader -# -############################################################################### -__ramboot_resume: - - #---------------------------------------------------- - # restore hsr0, psr, isr, and leave saved lr in gr7 - #---------------------------------------------------- - li __sleep_save_area,gr11 -#ifdef CONFIG_MMU - movsg hsr0,gr4 - sethi.p %hi(HSR0_EXMMU),gr3 - setlo %lo(HSR0_EXMMU),gr3 - andcc gr3,gr4,gr0,icc0 - bne icc0,#0,2f - - # need to use physical address - sethi.p %hi(__page_offset),gr3 - setlo %lo(__page_offset),gr3 - sub gr11,gr3,gr11 - - # flush all tlb entries - setlos #64,gr4 - setlos.p #PAGE_SIZE,gr5 - setlos #0,gr6 -1: - tlbpr gr6,gr0,#6,#0 - subicc.p gr4,#1,gr4,icc0 - add gr6,gr5,gr6 - bne icc0,#2,1b - - # need a temporary mapping for the current physical address we are - # using between time MMU is enabled and jump to virtual address is - # made. - sethi.p %hi(0x00000000),gr4 - setlo %lo(0x00000000),gr4 ; physical address - setlos #xAMPRx_L|xAMPRx_M|xAMPRx_SS_256Mb|xAMPRx_S_KERNEL|xAMPRx_V,gr5 - or gr4,gr5,gr5 - - movsg cxnr,gr13 - or gr4,gr13,gr4 - - movgs gr4,iamlr1 ; mapped from real address 0 - movgs gr5,iampr1 ; cached kernel memory at 0x00000000 -2: -#endif - - lddi @(gr11,#0),gr4 ; hsr0, psr - lddi @(gr11,#8),gr6 ; isr, lr - movgs gr4,hsr0 - bar - -#ifdef CONFIG_MMU - sethi.p %hi(1f),gr11 - setlo %lo(1f),gr11 - jmpl @(gr11,gr0) -1: - movgs gr0,iampr1 ; get rid of temporary mapping -#endif - movgs gr5,psr - movgs gr6,isr - - #---------------------------------------------------- - # unlock the icache which was locked before going to sleep - #---------------------------------------------------- - li __icache_lock_start,gr3 - li __icache_lock_end,gr4 -1: icul gr3 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,1b - - #---------------------------------------------------- - # back to business as usual - #---------------------------------------------------- - jmpl @(gr7,gr0) ; - -#endif /* CONFIG_PM */ - -############################################################################### -# -# CPU core sleep mode routine -# -############################################################################### - .globl frv_cpu_core_sleep - .type frv_cpu_core_sleep,@function -frv_cpu_core_sleep: - - # Preload into icache. - li #__core_sleep_icache_lock_start,gr3 - li #__core_sleep_icache_lock_end,gr4 - -1: icpl gr3,gr0,#1 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,1b - - bra __core_sleep_icache_lock_start - - .balign L1_CACHE_BYTES -__core_sleep_icache_lock_start: - - # (1) Set the PSR register ET bit to 0 to disable interrupts. - movsg psr,gr8 - andi.p gr8,#~(PSR_PIL),gr8 - andi gr8,#~(PSR_ET),gr4 - movgs gr4,psr - -#if 0 // Fujitsu recommend to skip this and will update docs. - # (2) Set '1' to all bits in the MASK register of the interrupt - # controller and mask interrupts. - sethi.p %hi(__addr_MASK),gr9 - setlo %lo(__addr_MASK),gr9 - sethi.p %hi(0xffff0000),gr4 - setlo %lo(0xffff0000),gr4 - ldi @(gr9,#0),gr10 - sti gr4,@(gr9,#0) -#endif - # (3) Flush all data in the cache using the DCEF instruction. - dcef @(gr0,gr0),#1 - - # (4) Execute the memory barrier instruction - membar - - # (5) Set the GPIO register so that the IRQ[3:0] pins become valid, as required. - # (6) Set the clock mode (CLKC register) as required. - # - At this time, also set the CLKC register P0 bit. - # (7) Set the HSR0 register PDM field to 001 . - movsg hsr0,gr4 - ori gr4,HSR0_PDM_CORE_SLEEP,gr4 - movgs gr4,hsr0 - - # (8) Execute NOP 32 times. - .rept 32 - nop - .endr - -#if 0 // Fujitsu recommend to skip this and will update docs. - # (9) Release the interrupt mask setting of the MASK register of the - # interrupt controller if necessary. - sti gr10,@(gr9,#0) - membar -#endif - - # (10) Set the PSR register ET bit to 1 to enable interrupts. - movgs gr8,psr - -__core_sleep_icache_lock_end: - - # Unlock from icache - li __core_sleep_icache_lock_start,gr3 - li __core_sleep_icache_lock_end,gr4 -1: icul gr3 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,1b - - bralr - - .size frv_cpu_core_sleep, .-frv_cpu_core_sleep |