diff options
Diffstat (limited to 'arch/arm')
82 files changed, 945 insertions, 2670 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 853aab5ab327..2fae14857dcf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -348,6 +348,7 @@ config ARCH_EP93XX select ARM_AMBA imply ARM_PATCH_PHYS_VIRT select ARM_VIC + select GENERIC_IRQ_MULTI_HANDLER select AUTO_ZRELADDR select CLKDEV_LOOKUP select CLKSRC_MMIO @@ -1292,9 +1293,15 @@ config KASAN_SHADOW_OFFSET config NR_CPUS int "Maximum number of CPUs (2-32)" - range 2 32 + range 2 16 if DEBUG_KMAP_LOCAL + range 2 32 if !DEBUG_KMAP_LOCAL depends on SMP default "4" + help + The maximum number of CPUs that the kernel can support. + Up to 32 CPUs can be supported, or up to 16 if kmap_local() + debugging is enabled, which uses half of the per-CPU fixmap + slots as guard regions. config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 5b213a1e68bb..5e33d0e88f5b 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -40,6 +40,9 @@ ethernet1 = &cpsw_emac1; spi0 = &spi0; spi1 = &spi1; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; }; cpus { diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 646a06420c77..5bd6a66d2c2b 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -32,7 +32,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { @@ -389,6 +390,7 @@ phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; + marvell,reg-init = <3 18 0 0x4985>; /* irq is connected to &pcawan pin 7 */ }; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 73b6b1f89de9..775ceb3acb6c 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -334,14 +334,6 @@ }; &pinctrl { - atmel,mux-mask = < - /* A B C */ - 0xFFFFFE7F 0xC0E0397F 0xEF00019D /* pioA */ - 0x03FFFFFF 0x02FC7E68 0x00780000 /* pioB */ - 0xffffffff 0xF83FFFFF 0xB800F3FC /* pioC */ - 0x003FFFFF 0x003F8000 0x00000000 /* pioD */ - >; - adc { pinctrl_adc_default: adc_default { atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 1b1163858b1d..e3251f3e3eaa 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -84,8 +84,8 @@ pinctrl-0 = <&pinctrl_macb0_default>; phy-mode = "rmii"; - ethernet-phy@0 { - reg = <0x0>; + ethernet-phy@7 { + reg = <0x7>; interrupt-parent = <&pioA>; interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 462b1dfb0385..720beec54d61 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -308,14 +308,6 @@ #reset-cells = <1>; }; - bsc_intr: interrupt-controller@7ef00040 { - compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; - reg = <0x7ef00040 0x30>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - }; - aon_intr: interrupt-controller@7ef00100 { compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; reg = <0x7ef00100 0x30>; @@ -362,8 +354,6 @@ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; - interrupt-parent = <&bsc_intr>; - interrupts = <0>; status = "disabled"; }; @@ -405,8 +395,6 @@ reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; - interrupt-parent = <&bsc_intr>; - interrupts = <1>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 3bf90d9e3335..149144cdff35 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -1,5 +1,8 @@ &l4_cfg { /* 0x4a000000 */ - compatible = "ti,dra7-l4-cfg", "simple-bus"; + compatible = "ti,dra7-l4-cfg", "simple-pm-bus"; + power-domains = <&prm_coreaon>; + clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x1000>; @@ -11,7 +14,7 @@ <0x00200000 0x4a200000 0x100000>; /* segment 2 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -493,7 +496,7 @@ }; segment@100000 { /* 0x4a100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00002000 0x00102000 0x001000>, /* ap 27 */ @@ -572,11 +575,33 @@ }; target-module@40000 { /* 0x4a140000, ap 31 06.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x400fc 4>, + <0x41100 4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + power-domains = <&prm_l3init>; + clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>; + clock-names = "fck"; #size-cells = <1>; + #address-cells = <1>; ranges = <0x0 0x40000 0x10000>; + + sata: sata@0 { + compatible = "snps,dwc-ahci"; + reg = <0 0x1100>, <0x1100 0x8>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; + ports-implemented = <0x1>; + }; }; target-module@51000 { /* 0x4a151000, ap 33 50.0 */ @@ -789,7 +814,7 @@ }; segment@200000 { /* 0x4a200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00018000 0x00218000 0x001000>, /* ap 43 */ @@ -1006,7 +1031,10 @@ }; &l4_per1 { /* 0x48000000 */ - compatible = "ti,dra7-l4-per1", "simple-bus"; + compatible = "ti,dra7-l4-per1", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4per_clkctrl DRA7_L4PER_L4_PER1_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -1020,7 +1048,7 @@ <0x00200000 0x48200000 0x200000>; /* segment 1 */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -1168,7 +1196,7 @@ }; }; - target-module@34000 { /* 0x48034000, ap 7 46.0 */ + timer3_target: target-module@34000 { /* 0x48034000, ap 7 46.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; reg = <0x34000 0x4>, <0x34010 0x4>; @@ -1195,7 +1223,7 @@ }; }; - target-module@36000 { /* 0x48036000, ap 9 4e.0 */ + timer4_target: target-module@36000 { /* 0x48036000, ap 9 4e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; reg = <0x36000 0x4>, <0x36010 0x4>; @@ -2269,14 +2297,17 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; }; &l4_per2 { /* 0x48400000 */ - compatible = "ti,dra7-l4-per2", "simple-bus"; + compatible = "ti,dra7-l4-per2", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48400000 0x800>, <0x48400800 0x800>, <0x48401000 0x400>, @@ -2296,7 +2327,7 @@ <0x48454000 0x48454000 0x400000>; /* L3 data port */ segment@0 { /* 0x48400000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -3094,7 +3125,10 @@ }; &l4_per3 { /* 0x48800000 */ - compatible = "ti,dra7-l4-per3", "simple-bus"; + compatible = "ti,dra7-l4-per3", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_L4_PER3_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48800000 0x800>, <0x48800800 0x800>, <0x48801000 0x400>, @@ -3106,7 +3140,7 @@ ranges = <0x00000000 0x48800000 0x200000>; /* segment 0 */ segment@0 { /* 0x48800000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -4205,7 +4239,10 @@ }; &l4_wkup { /* 0x4ae00000 */ - compatible = "ti,dra7-l4-wkup", "simple-bus"; + compatible = "ti,dra7-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkupaon>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4ae00000 0x800>, <0x4ae00800 0x800>, <0x4ae01000 0x1000>; @@ -4218,7 +4255,7 @@ <0x00030000 0x4ae30000 0x010000>; /* segment 3 */ segment@0 { /* 0x4ae00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -4295,7 +4332,7 @@ }; segment@10000 { /* 0x4ae10000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ @@ -4405,7 +4442,7 @@ }; segment@20000 { /* 0x4ae20000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ @@ -4511,7 +4548,7 @@ }; segment@30000 { /* 0x4ae30000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0000c000 0x0003c000 0x002000>, /* ap 30 */ diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index ce1194744f84..dfc1ef8ef6ae 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -46,6 +46,7 @@ timer { compatible = "arm,armv7-timer"; + status = "disabled"; /* See ARM architected timer wrap erratum i940 */ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, @@ -125,18 +126,6 @@ }; /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap5-mpu"; - ti,hwmods = "mpu"; - }; - }; - - /* * XXX: Use a flat representation of the SOC interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for @@ -144,16 +133,22 @@ * hierarchy. */ ocp: ocp { - compatible = "ti,dra7-l3-noc", "simple-bus"; + compatible = "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>, + <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; - ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x0 0x44000000 0x0 0x1000000>, - <0x0 0x45000000 0x0 0x1000>; - interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l3-noc@44000000 { + compatible = "ti,dra7-l3-noc"; + reg = <0x44000000 0x1000>, + <0x45000000 0x1000>; + interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; l4_cfg: interconnect@4a000000 { }; @@ -161,36 +156,65 @@ }; l4_per1: interconnect@48000000 { }; + + target-module@48210000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48210000 0x1f0000>; + + mpu { + compatible = "ti,omap5-mpu"; + }; + }; + l4_per2: interconnect@48400000 { }; l4_per3: interconnect@48800000 { }; - axi@0 { - compatible = "simple-bus"; + /* + * Register access seems to have complex dependencies and also + * seems to need an enabled phy. See the TRM chapter for "Table + * 26-678. Main Sequence PCIe Controller Global Initialization" + * and also dra7xx_pcie_probe(). + */ + axi0: target-module@51000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + power-domains = <&prm_l3init>; + resets = <&prm_l3init 0>; + reset-names = "rstctrl"; + clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>; + clock-names = "fck", "phy-clk", "phy-clk-div"; #size-cells = <1>; #address-cells = <1>; - ranges = <0x51000000 0x51000000 0x3000 - 0x0 0x20000000 0x10000000>; + ranges = <0x51000000 0x51000000 0x3000>, + <0x20000000 0x20000000 0x10000000>; dma-ranges; /** * To enable PCI endpoint mode, disable the pcie1_rc * node and enable pcie1_ep mode. */ pcie1_rc: pcie@51000000 { - reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; + reg = <0x51000000 0x2000>, + <0x51002000 0x14c>, + <0x20001000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 232 0x4>, <0 233 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x03000 0 0x00010000 - 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>, + <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; linux,pci-domain = <0>; - ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; ti,syscon-lane-sel = <&scm_conf_pcie 0x18>; @@ -209,13 +233,15 @@ }; pcie1_ep: pcie_ep@51000000 { - reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>; + reg = <0x51000000 0x28>, + <0x51002000 0x14c>, + <0x51001000 0x28>, + <0x20001000 0x10000000>; reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space"; interrupts = <0 232 0x4>; num-lanes = <1>; num-ib-windows = <4>; num-ob-windows = <16>; - ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; @@ -224,28 +250,42 @@ }; }; - axi@1 { - compatible = "simple-bus"; + /* + * Register access seems to have complex dependencies and also + * seems to need an enabled phy. See the TRM chapter for "Table + * 26-678. Main Sequence PCIe Controller Global Initialization" + * and also dra7xx_pcie_probe(). + */ + axi1: target-module@51800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>; + clock-names = "fck", "phy-clk", "phy-clk-div"; + power-domains = <&prm_l3init>; + resets = <&prm_l3init 1>; + reset-names = "rstctrl"; #size-cells = <1>; #address-cells = <1>; - ranges = <0x51800000 0x51800000 0x3000 - 0x0 0x30000000 0x10000000>; + ranges = <0x51800000 0x51800000 0x3000>, + <0x30000000 0x30000000 0x10000000>; dma-ranges; status = "disabled"; pcie2_rc: pcie@51800000 { - reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; + reg = <0x51800000 0x2000>, + <0x51802000 0x14c>, + <0x30001000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 355 0x4>, <0 356 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x03000 0 0x00010000 - 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>, + <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; linux,pci-domain = <1>; - ti,hwmods = "pcie2"; phys = <&pcie2_phy>; phy-names = "pcie-phy0"; interrupt-map-mask = <0 0 0 7>; @@ -336,8 +376,15 @@ target-module@43300000 { compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x43300000 0x4>; - reg-names = "rev"; + reg = <0x43300000 0x4>, + <0x43300010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -369,8 +416,15 @@ target-module@43400000 { compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x43400000 0x4>; - reg-names = "rev"; + reg = <0x43400000 0x4>, + <0x43400010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -387,8 +441,15 @@ target-module@43500000 { compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x43500000 0x4>; - reg-names = "rev"; + reg = <0x43500000 0x4>, + <0x43500010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -403,11 +464,23 @@ }; }; - dmm@4e000000 { - compatible = "ti,omap5-dmm"; - reg = <0x4e000000 0x800>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dmm"; + target-module@4e000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4e000000 0x4>, + <0x4e000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ranges = <0x0 0x4e000000 0x2000000>; + #size-cells = <1>; + #address-cells = <1>; + + dmm@0 { + compatible = "ti,omap5-dmm"; + reg = <0 0x800>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + }; }; ipu1: ipu@58820000 { @@ -694,32 +767,36 @@ >; }; - qspi: spi@4b300000 { - compatible = "ti,dra7xxx-qspi"; - reg = <0x4b300000 0x100>, - <0x5c000000 0x4000000>; - reg-names = "qspi_base", "qspi_mmap"; - syscon-chipselects = <&scm_conf 0x558>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "qspi"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; + target-module@4b300000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4b300000 0x4>, + <0x4b300010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>; clock-names = "fck"; - num-cs = <4>; - interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - /* OCP2SCP3 */ - sata: sata@4a141100 { - compatible = "snps,dwc-ahci"; - reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - phys = <&sata_phy>; - phy-names = "sata-phy"; - clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; - ti,hwmods = "sata"; - ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b300000 0x1000>, + <0x5c000000 0x5c000000 0x4000000>; + + qspi: spi@0 { + compatible = "ti,dra7xxx-qspi"; + reg = <0 0x100>, + <0x5c000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; + clock-names = "fck"; + num-cs = <4>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; }; /* OCP2SCP1 */ @@ -1241,3 +1318,22 @@ assigned-clock-parents = <&sys_32k_ck>; }; }; + +/* Local timers, see ARM architected timer wrap erratum i940 */ +&timer3_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>; + assigned-clock-parents = <&timer_sys_clk_div>; + }; +}; + +&timer4_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>; + assigned-clock-parents = <&timer_sys_clk_div>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 7a1e53195785..f28a96fcf23e 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -433,6 +433,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vdd_sd1_reg>; status = "disabled"; }; @@ -442,5 +443,6 @@ &pinctrl_usdhc3_cdwp>; cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vdd_sd0_reg>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index c593597b2119..5a1e10def6ef 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -210,9 +210,6 @@ micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET_REF>; clock-names = "rmii-ref"; - reset-gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <100>; }; @@ -222,9 +219,6 @@ micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET2_REF>; clock-names = "rmii-ref"; - reset-gpios = <&gpio_spi 2 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <100>; }; }; }; @@ -243,6 +237,22 @@ status = "okay"; }; +&gpio_spi { + eth0-phy-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "eth0-phy"; + }; + + eth1-phy-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "eth1-phy"; + }; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts index ecbb2cc5b9ab..79cc45728cd2 100644 --- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts +++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts @@ -14,5 +14,6 @@ }; &gpmi { + fsl,use-minimum-ecc; status = "okay"; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 9dcae1f2bc99..c5b9da0d7e6c 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -24,6 +24,9 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index e0bb60a30779..99721673d7af 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -1,6 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 &l4_cfg { /* 0x4a000000 */ - compatible = "ti,omap4-l4-cfg", "simple-bus"; + compatible = "ti,omap4-l4-cfg", "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l4_cfg_clkctrl OMAP4_L4_CFG_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x1000>; @@ -16,7 +19,7 @@ <0x00300000 0x4a300000 0x080000>; /* segment 6 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -43,7 +46,6 @@ target-module@2000 { /* 0x4a002000, ap 3 06.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "ctrl_module_core"; reg = <0x2000 0x4>, <0x2010 0x4>; reg-names = "rev", "sysc"; @@ -347,7 +349,7 @@ }; segment@80000 { /* 0x4a080000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ @@ -639,7 +641,7 @@ }; segment@100000 { /* 0x4a100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */ @@ -653,7 +655,6 @@ target-module@0 { /* 0x4a100000, ap 21 2a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "ctrl_module_pad_core"; reg = <0x0 0x4>, <0x10 0x4>; reg-names = "rev", "sysc"; @@ -741,13 +742,13 @@ }; segment@180000 { /* 0x4a180000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; segment@200000 { /* 0x4a200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */ @@ -903,13 +904,13 @@ }; segment@280000 { /* 0x4a280000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ @@ -944,7 +945,10 @@ }; &l4_wkup { /* 0x4a300000 */ - compatible = "ti,omap4-l4-wkup", "simple-bus"; + compatible = "ti,omap4-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkup>; + clocks = <&l4_wkup_clkctrl OMAP4_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a300000 0x800>, <0x4a300800 0x800>, <0x4a301000 0x1000>; @@ -956,7 +960,7 @@ <0x00020000 0x4a320000 0x010000>; /* segment 2 */ segment@0 { /* 0x4a300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -1041,7 +1045,6 @@ target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "ctrl_module_wkup"; reg = <0xc000 0x4>, <0xc010 0x4>; reg-names = "rev", "sysc"; @@ -1062,7 +1065,7 @@ }; segment@10000 { /* 0x4a310000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ @@ -1202,7 +1205,6 @@ target-module@e000 { /* 0x4a31e000, ap 21 30.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "ctrl_module_pad_wkup"; reg = <0xe000 0x4>, <0xe010 0x4>; reg-names = "rev", "sysc"; @@ -1231,7 +1233,7 @@ }; segment@20000 { /* 0x4a320000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ @@ -1284,7 +1286,10 @@ }; &l4_per { /* 0x48000000 */ - compatible = "ti,omap4-l4-per", "simple-bus"; + compatible = "ti,omap4-l4-per", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4_per_clkctrl OMAP4_L4_PER_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -1298,7 +1303,7 @@ <0x00200000 0x48200000 0x200000>; /* segment 1 */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -2437,7 +2442,7 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */ diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 72e4f6481776..2bbff9032be3 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -22,6 +22,11 @@ i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; + mmc3 = &mmc4; + mmc4 = &mmc5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -54,14 +59,12 @@ }; /* - * Note that 4430 needs cross trigger interface (CTI) supported - * before we can configure the interrupts. This means sampling - * events are not supported for pmu. Note that 4460 does not use - * CTI, see also 4460.dtsi. + * Needed early by omap4_sram_init() for barrier, do not move to l3 + * interconnect as simple-pm-bus probes at module_init() time. */ - pmu { - compatible = "arm,cortex-a9-pmu"; - ti,hwmods = "debugss"; + ocmcram: sram@40304000 { + compatible = "mmio-sram"; + reg = <0x40304000 0xa000>; /* 40k */ }; gic: interrupt-controller@48241000 { @@ -97,19 +100,6 @@ }; /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap4-mpu"; - ti,hwmods = "mpu"; - sram = <&ocmcram>; - }; - }; - - /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for @@ -117,16 +107,23 @@ * hierarchy. */ ocp { - compatible = "ti,omap4-l3-noc", "simple-bus"; + compatible = "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l3_1_clkctrl OMAP4_L3_MAIN_1_CLKCTRL 0>, + <&l3_2_clkctrl OMAP4_L3_MAIN_2_CLKCTRL 0>, + <&l3_instr_clkctrl OMAP4_L3_MAIN_3_CLKCTRL 0>; #address-cells = <1>; #size-cells = <1>; ranges; - ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - reg = <0x44000000 0x1000>, - <0x44800000 0x2000>, - <0x45000000 0x1000>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l3-noc@44000000 { + compatible = "ti,omap4-l3-noc"; + reg = <0x44000000 0x1000>, + <0x44800000 0x2000>, + <0x45000000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; l4_wkup: interconnect@4a300000 { }; @@ -137,12 +134,22 @@ l4_per: interconnect@48000000 { }; - l4_abe: interconnect@40100000 { + target-module@48210000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpuss_clkctrl OMAP4_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48210000 0x1f0000>; + + mpu { + compatible = "ti,omap4-mpu"; + sram = <&ocmcram>; + }; }; - ocmcram: sram@40304000 { - compatible = "mmio-sram"; - reg = <0x40304000 0xa000>; /* 40k */ + l4_abe: interconnect@40100000 { }; target-module@50000000 { @@ -184,7 +191,6 @@ target-module@52000000 { compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "iss"; reg = <0x52000000 0x4>, <0x52000010 0x4>; reg-names = "rev", "sysc"; @@ -198,6 +204,7 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; ti,sysc-delay-us = <2>; + power-domains = <&prm_cam>; clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -207,6 +214,26 @@ /* No child device binding, driver in staging */ }; + /* + * Note that 4430 needs cross trigger interface (CTI) supported + * before we can configure the interrupts. This means sampling + * events are not supported for pmu. Note that 4460 does not use + * CTI, see also 4460.dtsi. + */ + target-module@54000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_emu>; + clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x54000000 0x1000000>; + + pmu: pmu { + compatible = "arm,cortex-a9-pmu"; + }; + }; + target-module@55082000 { compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x55082000 0x4>, @@ -256,35 +283,67 @@ /* No child device binding or driver in mainline */ }; - dmm@4e000000 { - compatible = "ti,omap4-dmm"; - reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; - ti,hwmods = "dmm"; + target-module@4e000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4e000000 0x4>, + <0x4e000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ranges = <0x0 0x4e000000 0x2000000>; + #size-cells = <1>; + #address-cells = <1>; + + dmm@0 { + compatible = "ti,omap4-dmm"; + reg = <0 0x800>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; }; - emif1: emif@4c000000 { - compatible = "ti,emif-4d"; - reg = <0x4c000000 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "emif1"; - ti,no-idle-on-init; - phy-type = <1>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + target-module@4c000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x4c000000 0x4>; + reg-names = "rev"; + clocks = <&l3_emif_clkctrl OMAP4_EMIF1_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000000 0x1000000>; + + emif1: emif@0 { + compatible = "ti,emif-4d"; + reg = <0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; - emif2: emif@4d000000 { - compatible = "ti,emif-4d"; - reg = <0x4d000000 0x100>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "emif2"; - ti,no-idle-on-init; - phy-type = <1>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + target-module@4d000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x4d000000 0x4>; + reg-names = "rev"; + clocks = <&l3_emif_clkctrl OMAP4_EMIF2_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000000 0x1000000>; + + emif2: emif@0 { + compatible = "ti,emif-4d"; + reg = <0 0x100>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; dsp: dsp { @@ -435,6 +494,7 @@ <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; + power-domains = <&prm_gfx>; clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 2d3e54901b6e..3d6db1db94e0 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -26,13 +26,6 @@ }; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "debugss"; - }; - thermal-zones { #include "omap4-cpu-thermal.dtsi" }; @@ -128,4 +121,10 @@ <0x00030000 0x00030000 0x00010000>; }; +&pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; +}; + /include/ "omap446x-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 532868591107..1f1c04d8f472 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -770,14 +770,6 @@ ti,max-div = <2>; }; - sha2md5_fck: sha2md5_fck@15c8 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3_div_ck>; - ti,bit-shift = <1>; - reg = <0x15c8>; - }; - usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 887b3359dd5a..b148b289e830 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -1,5 +1,8 @@ &l4_cfg { /* 0x4a000000 */ - compatible = "ti,omap5-l4-cfg", "simple-bus"; + compatible = "ti,omap5-l4-cfg", "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l4cfg_clkctrl OMAP5_L4_CFG_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x1000>; @@ -15,7 +18,7 @@ <0x00300000 0x4a300000 0x080000>; /* segment 6 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -391,7 +394,7 @@ }; segment@80000 { /* 0x4a080000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ @@ -654,7 +657,7 @@ }; segment@100000 { /* 0x4a100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00002000 0x00102000 0x001000>, /* ap 59 */ @@ -691,22 +694,44 @@ }; target-module@40000 { /* 0x4a140000, ap 101 16.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x400fc 4>, + <0x41100 4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + power-domains = <&prm_l3init>; + clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 0>; + clock-names = "fck"; #size-cells = <1>; + #address-cells = <1>; ranges = <0x0 0x40000 0x10000>; + + sata: sata@0 { + compatible = "snps,dwc-ahci"; + reg = <0 0x1100>, <0x1100 0x8>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; + ports-implemented = <0x1>; + }; }; }; segment@180000 { /* 0x4a180000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; segment@200000 { /* 0x4a200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 29 */ @@ -912,20 +937,23 @@ }; segment@280000 { /* 0x4a280000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; segment@300000 { /* 0x4a300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; }; &l4_per { /* 0x48000000 */ - compatible = "ti,omap5-l4-per", "simple-bus"; + compatible = "ti,omap5-l4-per", "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l4per_clkctrl OMAP5_L4_PER_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -939,7 +967,7 @@ <0x00200000 0x48200000 0x200000>; /* segment 1 */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -2148,14 +2176,17 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; }; &l4_wkup { /* 0x4ae00000 */ - compatible = "ti,omap5-l4-wkup", "simple-bus"; + compatible = "ti,omap5-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkupaon>; + clocks = <&wkupaon_clkctrl OMAP5_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4ae00000 0x800>, <0x4ae00800 0x800>, <0x4ae01000 0x1000>; @@ -2167,7 +2198,7 @@ <0x00020000 0x4ae20000 0x010000>; /* segment 2 */ segment@0 { /* 0x4ae00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -2296,7 +2327,7 @@ }; segment@10000 { /* 0x4ae10000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ @@ -2423,7 +2454,7 @@ }; segment@20000 { /* 0x4ae20000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e025b7c9a357..bac6fa838793 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -25,6 +25,11 @@ i2c2 = &i2c3; i2c3 = &i2c4; i2c4 = &i2c5; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; + mmc3 = &mmc4; + mmc4 = &mmc5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -101,6 +106,15 @@ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; }; + /* + * Needed early by omap4_sram_init() for barrier, do not move to l3 + * interconnect as simple-pm-bus probes at module_init() time. + */ + ocmcram: sram@40300000 { + compatible = "mmio-sram"; + reg = <0 0x40300000 0 0x20000>; /* 128k */ + }; + gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; @@ -121,19 +135,6 @@ }; /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap4-mpu"; - ti,hwmods = "mpu"; - sram = <&ocmcram>; - }; - }; - - /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for @@ -141,17 +142,24 @@ * hierarchy. */ ocp { - compatible = "ti,omap5-l3-noc", "simple-bus"; + compatible = "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l3main1_clkctrl OMAP5_L3_MAIN_1_CLKCTRL 0>, + <&l3main2_clkctrl OMAP5_L3_MAIN_2_CLKCTRL 0>, + <&l3instr_clkctrl OMAP5_L3_MAIN_3_CLKCTRL 0>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xc0000000>; dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; - ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - reg = <0 0x44000000 0 0x2000>, - <0 0x44800000 0 0x3000>, - <0 0x45000000 0 0x4000>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l3-noc@44000000 { + compatible = "ti,omap5-l3-noc"; + reg = <0x44000000 0x2000>, + <0x44800000 0x3000>, + <0x45000000 0x4000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; l4_wkup: interconnect@4ae00000 { }; @@ -162,31 +170,58 @@ l4_per: interconnect@48000000 { }; - l4_abe: interconnect@40100000 { + target-module@48210000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpu_clkctrl OMAP5_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48210000 0x1f0000>; + + mpu { + compatible = "ti,omap4-mpu"; + sram = <&ocmcram>; + }; }; - ocmcram: sram@40300000 { - compatible = "mmio-sram"; - reg = <0x40300000 0x20000>; /* 128k */ + l4_abe: interconnect@40100000 { }; - gpmc: gpmc@50000000 { - compatible = "ti,omap4430-gpmc"; - reg = <0x50000000 0x1000>; - #address-cells = <2>; - #size-cells = <1>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 4>; - dma-names = "rxtx"; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - ti,hwmods = "gpmc"; - clocks = <&l3_iclk_div>; + target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000000 4>, + <0x50000010 4>, + <0x50000014 4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + ti,no-idle-on-init; + clocks = <&l3main2_clkctrl OMAP5_L3_MAIN_2_GPMC_CLKCTRL 0>; clock-names = "fck"; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ + <0x00000000 0x00000000 0x40000000>; /* data */ + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 4>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + clock-names = "fck"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; }; target-module@55082000 { @@ -241,35 +276,67 @@ status = "disabled"; }; - dmm@4e000000 { - compatible = "ti,omap5-dmm"; - reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; - ti,hwmods = "dmm"; + target-module@4e000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4e000000 0x4>, + <0x4e000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ranges = <0x0 0x4e000000 0x2000000>; + #size-cells = <1>; + #address-cells = <1>; + + dmm@0 { + compatible = "ti,omap5-dmm"; + reg = <0 0x800>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; }; - emif1: emif@4c000000 { - compatible = "ti,emif-4d5"; - ti,hwmods = "emif1"; - ti,no-idle-on-init; - phy-type = <2>; /* DDR PHY type: Intelli PHY */ - reg = <0x4c000000 0x400>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + target-module@4c000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x4c000000 0x4>; + reg-names = "rev"; + clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000000 0x1000000>; + + emif1: emif@0 { + compatible = "ti,emif-4d5"; + reg = <0 0x400>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; - emif2: emif@4d000000 { - compatible = "ti,emif-4d5"; - ti,hwmods = "emif2"; - ti,no-idle-on-init; - phy-type = <2>; /* DDR PHY type: Intelli PHY */ - reg = <0x4d000000 0x400>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + target-module@4d000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x4d000000 0x4>; + reg-names = "rev"; + clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000000 0x1000000>; + + emif2: emif@0 { + compatible = "ti,emif-4d5"; + reg = <0 0x400>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; aes1_target: target-module@4b501000 { @@ -369,18 +436,6 @@ #thermal-sensor-cells = <1>; }; - /* OCP2SCP3 */ - sata: sata@4a141100 { - compatible = "snps,dwc-ahci"; - reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - phys = <&sata_phy>; - phy-names = "sata-phy"; - clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; - ti,hwmods = "sata"; - ports-implemented = <0x1>; - }; - target-module@56000000 { compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x5600fe00 0x4>, diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 84066c1298df..ec45ced3cde6 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -606,6 +606,15 @@ compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; ranges = <0xfffff400 0xfffff400 0x800>; + /* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */ + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xef00019d /* pioA */ + 0x03ffffff 0x02fc7e7f 0x00780000 /* pioB */ + 0xffffffff 0xffffffff 0xf83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + pioA: gpio@fffff400 { compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 4b8031782555..e242d7211059 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -452,32 +452,36 @@ usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART2_K>; + wakeup-source; status = "disabled"; }; usart3: serial@4000f000 { compatible = "st,stm32h7-uart"; reg = <0x4000f000 0x400>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART3_K>; + wakeup-source; status = "disabled"; }; uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART4_K>; + wakeup-source; status = "disabled"; }; uart5: serial@40011000 { compatible = "st,stm32h7-uart"; reg = <0x40011000 0x400>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART5_K>; + wakeup-source; status = "disabled"; }; @@ -577,16 +581,18 @@ uart7: serial@40018000 { compatible = "st,stm32h7-uart"; reg = <0x40018000 0x400>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART7_K>; + wakeup-source; status = "disabled"; }; uart8: serial@40019000 { compatible = "st,stm32h7-uart"; reg = <0x40019000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART8_K>; + wakeup-source; status = "disabled"; }; @@ -665,8 +671,9 @@ usart6: serial@44003000 { compatible = "st,stm32h7-uart"; reg = <0x44003000 0x400>; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART6_K>; + wakeup-source; status = "disabled"; }; @@ -1505,8 +1512,9 @@ usart1: serial@5c000000 { compatible = "st,stm32h7-uart"; reg = <0x5c000000 0x400>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART1_K>; + wakeup-source; status = "disabled"; }; diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 3823da605430..d3242264514e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -791,7 +791,6 @@ CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_XHCI_TEGRA=m CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_STI=y -CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_EXYNOS=m CONFIG_USB_EHCI_MV=m CONFIG_USB_OHCI_HCD=y @@ -817,6 +816,7 @@ CONFIG_USB_DWC2=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_CHIPIDEA_TEGRA=y CONFIG_USB_ISP1760=y CONFIG_USB_HSIC_USB3503=y CONFIG_AB8500_USB=y diff --git a/arch/arm/crypto/aes-cipher-core.S b/arch/arm/crypto/aes-cipher-core.S index 472e56d09eea..1da3f41359aa 100644 --- a/arch/arm/crypto/aes-cipher-core.S +++ b/arch/arm/crypto/aes-cipher-core.S @@ -99,28 +99,6 @@ __hround \out2, \out3, \in2, \in1, \in0, \in3, \in1, \in0, 0, \sz, \op, \oldcpsr .endm - .macro __rev, out, in - .if __LINUX_ARM_ARCH__ < 6 - lsl t0, \in, #24 - and t1, \in, #0xff00 - and t2, \in, #0xff0000 - orr \out, t0, \in, lsr #24 - orr \out, \out, t1, lsl #8 - orr \out, \out, t2, lsr #8 - .else - rev \out, \in - .endif - .endm - - .macro __adrl, out, sym, c - .if __LINUX_ARM_ARCH__ < 7 - ldr\c \out, =\sym - .else - movw\c \out, #:lower16:\sym - movt\c \out, #:upper16:\sym - .endif - .endm - .macro do_crypt, round, ttab, ltab, bsz push {r3-r11, lr} @@ -133,10 +111,10 @@ ldr r7, [in, #12] #ifdef CONFIG_CPU_BIG_ENDIAN - __rev r4, r4 - __rev r5, r5 - __rev r6, r6 - __rev r7, r7 + rev_l r4, t0 + rev_l r5, t0 + rev_l r6, t0 + rev_l r7, t0 #endif eor r4, r4, r8 @@ -144,7 +122,7 @@ eor r6, r6, r10 eor r7, r7, r11 - __adrl ttab, \ttab + mov_l ttab, \ttab /* * Disable interrupts and prefetch the 1024-byte 'ft' or 'it' table into * L1 cache, assuming cacheline size >= 32. This is a hardening measure @@ -180,7 +158,7 @@ 2: .ifb \ltab add ttab, ttab, #1 .else - __adrl ttab, \ltab + mov_l ttab, \ltab // Prefetch inverse S-box for final round; see explanation above .set i, 0 .rept 256 / 64 @@ -194,10 +172,10 @@ \round r4, r5, r6, r7, r8, r9, r10, r11, \bsz, b, rounds #ifdef CONFIG_CPU_BIG_ENDIAN - __rev r4, r4 - __rev r5, r5 - __rev r6, r6 - __rev r7, r7 + rev_l r4, t0 + rev_l r5, t0 + rev_l r6, t0 + rev_l r7, t0 #endif ldr out, [sp] diff --git a/arch/arm/crypto/blake2b-neon-glue.c b/arch/arm/crypto/blake2b-neon-glue.c index 34d73200e7fa..4b59d027ba4a 100644 --- a/arch/arm/crypto/blake2b-neon-glue.c +++ b/arch/arm/crypto/blake2b-neon-glue.c @@ -85,8 +85,8 @@ static int __init blake2b_neon_mod_init(void) static void __exit blake2b_neon_mod_exit(void) { - return crypto_unregister_shashes(blake2b_neon_algs, - ARRAY_SIZE(blake2b_neon_algs)); + crypto_unregister_shashes(blake2b_neon_algs, + ARRAY_SIZE(blake2b_neon_algs)); } module_init(blake2b_neon_mod_init); diff --git a/arch/arm/crypto/blake2s-core.S b/arch/arm/crypto/blake2s-core.S index bed897e9a181..86345751bbf3 100644 --- a/arch/arm/crypto/blake2s-core.S +++ b/arch/arm/crypto/blake2s-core.S @@ -8,6 +8,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> // Registers used to hold message words temporarily. There aren't // enough ARM registers to hold the whole message block, so we have to @@ -38,6 +39,23 @@ #endif .endm +.macro _le32_bswap a, tmp +#ifdef __ARMEB__ + rev_l \a, \tmp +#endif +.endm + +.macro _le32_bswap_8x a, b, c, d, e, f, g, h, tmp + _le32_bswap \a, \tmp + _le32_bswap \b, \tmp + _le32_bswap \c, \tmp + _le32_bswap \d, \tmp + _le32_bswap \e, \tmp + _le32_bswap \f, \tmp + _le32_bswap \g, \tmp + _le32_bswap \h, \tmp +.endm + // Execute a quarter-round of BLAKE2s by mixing two columns or two diagonals. // (a0, b0, c0, d0) and (a1, b1, c1, d1) give the registers containing the two // columns/diagonals. s0-s1 are the word offsets to the message words the first @@ -180,8 +198,10 @@ ENTRY(blake2s_compress_arch) tst r1, #3 bne .Lcopy_block_misaligned ldmia r1!, {r2-r9} + _le32_bswap_8x r2, r3, r4, r5, r6, r7, r8, r9, r14 stmia r12!, {r2-r9} ldmia r1!, {r2-r9} + _le32_bswap_8x r2, r3, r4, r5, r6, r7, r8, r9, r14 stmia r12, {r2-r9} .Lcopy_block_done: str r1, [sp, #68] // Update message pointer @@ -268,6 +288,7 @@ ENTRY(blake2s_compress_arch) 1: #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS ldr r3, [r1], #4 + _le32_bswap r3, r4 #else ldrb r3, [r1, #0] ldrb r4, [r1, #1] diff --git a/arch/arm/crypto/chacha-scalar-core.S b/arch/arm/crypto/chacha-scalar-core.S index 2985b80a45b5..083fe1ab96d0 100644 --- a/arch/arm/crypto/chacha-scalar-core.S +++ b/arch/arm/crypto/chacha-scalar-core.S @@ -41,32 +41,15 @@ X14 .req r12 X15 .req r14 -.macro __rev out, in, t0, t1, t2 -.if __LINUX_ARM_ARCH__ >= 6 - rev \out, \in -.else - lsl \t0, \in, #24 - and \t1, \in, #0xff00 - and \t2, \in, #0xff0000 - orr \out, \t0, \in, lsr #24 - orr \out, \out, \t1, lsl #8 - orr \out, \out, \t2, lsr #8 -.endif -.endm - -.macro _le32_bswap x, t0, t1, t2 +.macro _le32_bswap_4x a, b, c, d, tmp #ifdef __ARMEB__ - __rev \x, \x, \t0, \t1, \t2 + rev_l \a, \tmp + rev_l \b, \tmp + rev_l \c, \tmp + rev_l \d, \tmp #endif .endm -.macro _le32_bswap_4x a, b, c, d, t0, t1, t2 - _le32_bswap \a, \t0, \t1, \t2 - _le32_bswap \b, \t0, \t1, \t2 - _le32_bswap \c, \t0, \t1, \t2 - _le32_bswap \d, \t0, \t1, \t2 -.endm - .macro __ldrd a, b, src, offset #if __LINUX_ARM_ARCH__ >= 6 ldrd \a, \b, [\src, #\offset] @@ -200,7 +183,7 @@ add X1, X1, r9 add X2, X2, r10 add X3, X3, r11 - _le32_bswap_4x X0, X1, X2, X3, r8, r9, r10 + _le32_bswap_4x X0, X1, X2, X3, r8 ldmia r12!, {r8-r11} eor X0, X0, r8 eor X1, X1, r9 @@ -216,7 +199,7 @@ ldmia r12!, {X0-X3} add X6, r10, X6, ror #brot add X7, r11, X7, ror #brot - _le32_bswap_4x X4, X5, X6, X7, r8, r9, r10 + _le32_bswap_4x X4, X5, X6, X7, r8 eor X4, X4, X0 eor X5, X5, X1 eor X6, X6, X2 @@ -231,7 +214,7 @@ add r1, r1, r9 // x9 add r6, r6, r10 // x10 add r7, r7, r11 // x11 - _le32_bswap_4x r0, r1, r6, r7, r8, r9, r10 + _le32_bswap_4x r0, r1, r6, r7, r8 ldmia r12!, {r8-r11} eor r0, r0, r8 // x8 eor r1, r1, r9 // x9 @@ -245,7 +228,7 @@ add r3, r9, r3, ror #drot // x13 add r4, r10, r4, ror #drot // x14 add r5, r11, r5, ror #drot // x15 - _le32_bswap_4x r2, r3, r4, r5, r9, r10, r11 + _le32_bswap_4x r2, r3, r4, r5, r9 ldr r9, [sp, #72] // load LEN eor r2, r2, r0 // x12 eor r3, r3, r1 // x13 @@ -301,7 +284,7 @@ add X1, X1, r9 add X2, X2, r10 add X3, X3, r11 - _le32_bswap_4x X0, X1, X2, X3, r8, r9, r10 + _le32_bswap_4x X0, X1, X2, X3, r8 stmia r14!, {X0-X3} // Save keystream for x4-x7 @@ -311,7 +294,7 @@ add X5, r9, X5, ror #brot add X6, r10, X6, ror #brot add X7, r11, X7, ror #brot - _le32_bswap_4x X4, X5, X6, X7, r8, r9, r10 + _le32_bswap_4x X4, X5, X6, X7, r8 add r8, sp, #64 stmia r14!, {X4-X7} @@ -323,7 +306,7 @@ add r1, r1, r9 // x9 add r6, r6, r10 // x10 add r7, r7, r11 // x11 - _le32_bswap_4x r0, r1, r6, r7, r8, r9, r10 + _le32_bswap_4x r0, r1, r6, r7, r8 stmia r14!, {r0,r1,r6,r7} __ldrd r8, r9, sp, 144 __ldrd r10, r11, sp, 152 @@ -331,7 +314,7 @@ add r3, r9, r3, ror #drot // x13 add r4, r10, r4, ror #drot // x14 add r5, r11, r5, ror #drot // x15 - _le32_bswap_4x r2, r3, r4, r5, r9, r10, r11 + _le32_bswap_4x r2, r3, r4, r5, r9 stmia r14, {r2-r5} // Stack: ks0-ks15 unused0-unused7 x0-x15 OUT IN LEN diff --git a/arch/arm/crypto/curve25519-core.S b/arch/arm/crypto/curve25519-core.S index be18af52e7dc..b697fa5d059a 100644 --- a/arch/arm/crypto/curve25519-core.S +++ b/arch/arm/crypto/curve25519-core.S @@ -10,8 +10,8 @@ #include <linux/linkage.h> .text -.fpu neon .arch armv7-a +.fpu neon .align 4 ENTRY(curve25519_neon) diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c index 3023c1acfa19..c31bd8f7c092 100644 --- a/arch/arm/crypto/poly1305-glue.c +++ b/arch/arm/crypto/poly1305-glue.c @@ -29,7 +29,7 @@ void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit) static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon); -void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key) +void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE]) { poly1305_init_arm(&dctx->h, key); dctx->s[0] = get_unaligned_le32(key + 16); diff --git a/arch/arm/include/asm/paravirt.h b/arch/arm/include/asm/paravirt.h index cdbf02d9c1d4..95d5b0d625cd 100644 --- a/arch/arm/include/asm/paravirt.h +++ b/arch/arm/include/asm/paravirt.h @@ -3,23 +3,19 @@ #define _ASM_ARM_PARAVIRT_H #ifdef CONFIG_PARAVIRT +#include <linux/static_call_types.h> + struct static_key; extern struct static_key paravirt_steal_enabled; extern struct static_key paravirt_steal_rq_enabled; -struct pv_time_ops { - unsigned long long (*steal_clock)(int cpu); -}; - -struct paravirt_patch_template { - struct pv_time_ops time; -}; +u64 dummy_steal_clock(int cpu); -extern struct paravirt_patch_template pv_ops; +DECLARE_STATIC_CALL(pv_steal_clock, dummy_steal_clock); static inline u64 paravirt_steal_clock(int cpu) { - return pv_ops.time.steal_clock(cpu); + return static_call(pv_steal_clock)(cpu); } #endif diff --git a/arch/arm/include/asm/xen/swiotlb-xen.h b/arch/arm/include/asm/xen/swiotlb-xen.h new file mode 100644 index 000000000000..455ade5d5320 --- /dev/null +++ b/arch/arm/include/asm/xen/swiotlb-xen.h @@ -0,0 +1 @@ +#include <xen/arm/swiotlb-xen.h> diff --git a/arch/arm/kernel/paravirt.c b/arch/arm/kernel/paravirt.c index 4cfed91fe256..7dd9806369fb 100644 --- a/arch/arm/kernel/paravirt.c +++ b/arch/arm/kernel/paravirt.c @@ -9,10 +9,15 @@ #include <linux/export.h> #include <linux/jump_label.h> #include <linux/types.h> +#include <linux/static_call.h> #include <asm/paravirt.h> struct static_key paravirt_steal_enabled; struct static_key paravirt_steal_rq_enabled; -struct paravirt_patch_template pv_ops; -EXPORT_SYMBOL_GPL(pv_ops); +static u64 native_steal_clock(int cpu) +{ + return 0; +} + +DEFINE_STATIC_CALL(pv_steal_clock, native_steal_clock); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 120f9aa6fff3..90dcdfe3b3d0 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -17,6 +17,8 @@ #include <linux/clk/at91_pmc.h> #include <linux/platform_data/atmel.h> +#include <soc/at91/pm.h> + #include <asm/cacheflush.h> #include <asm/fncpy.h> #include <asm/system_misc.h> @@ -25,17 +27,6 @@ #include "generic.h" #include "pm.h" -/* - * FIXME: this is needed to communicate between the pinctrl driver and - * the PM implementation in the machine. Possibly part of the PM - * implementation should be moved down into the pinctrl driver and get - * called as part of the generic suspend/resume path. - */ -#ifdef CONFIG_PINCTRL_AT91 -extern void at91_pinctrl_gpio_suspend(void); -extern void at91_pinctrl_gpio_resume(void); -#endif - struct at91_soc_pm { int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity); int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity); @@ -326,6 +317,12 @@ static void at91_pm_suspend(suspend_state_t state) static int at91_pm_enter(suspend_state_t state) { #ifdef CONFIG_PINCTRL_AT91 + /* + * FIXME: this is needed to communicate between the pinctrl driver and + * the PM implementation in the machine. Possibly part of the PM + * implementation should be moved down into the pinctrl driver and get + * called as part of the generic suspend/resume path. + */ at91_pinctrl_gpio_suspend(); #endif diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index ea0be59f469a..fb4a394ece3a 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -78,12 +78,11 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) #endif /* CONFIG_HOTPLUG_CPU */ /** - * exynos_core_power_down : power down the specified cpu - * @cpu : the cpu to power down + * exynos_cpu_power_down() - power down the specified cpu + * @cpu: the cpu to power down * * Power down the specified cpu. The sequence must be finished by a * call to cpu_do_idle() - * */ void exynos_cpu_power_down(int cpu) { @@ -107,8 +106,8 @@ void exynos_cpu_power_down(int cpu) } /** - * exynos_cpu_power_up : power up the specified cpu - * @cpu : the cpu to power up + * exynos_cpu_power_up() - power up the specified cpu + * @cpu: the cpu to power up * * Power up the specified cpu */ @@ -124,9 +123,8 @@ void exynos_cpu_power_up(int cpu) } /** - * exynos_cpu_power_state : returns the power state of the cpu - * @cpu : the cpu to retrieve the power state from - * + * exynos_cpu_power_state() - returns the power state of the cpu + * @cpu: the cpu to retrieve the power state from */ int exynos_cpu_power_state(int cpu) { @@ -135,8 +133,8 @@ int exynos_cpu_power_state(int cpu) } /** - * exynos_cluster_power_down : power down the specified cluster - * @cluster : the cluster to power down + * exynos_cluster_power_down() - power down the specified cluster + * @cluster: the cluster to power down */ void exynos_cluster_power_down(int cluster) { @@ -144,8 +142,8 @@ void exynos_cluster_power_down(int cluster) } /** - * exynos_cluster_power_up : power up the specified cluster - * @cluster : the cluster to power up + * exynos_cluster_power_up() - power up the specified cluster + * @cluster: the cluster to power up */ void exynos_cluster_power_up(int cluster) { @@ -154,8 +152,8 @@ void exynos_cluster_power_up(int cluster) } /** - * exynos_cluster_power_state : returns the power state of the cluster - * @cluster : the cluster to retrieve the power state from + * exynos_cluster_power_state() - returns the power state of the cluster + * @cluster: the cluster to retrieve the power state from * */ int exynos_cluster_power_state(int cluster) @@ -165,7 +163,7 @@ int exynos_cluster_power_state(int cluster) } /** - * exynos_scu_enable : enables SCU for Cortex-A9 based system + * exynos_scu_enable() - enables SCU for Cortex-A9 based system */ void exynos_scu_enable(void) { diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c index 0b2fd7e2e9b4..90b1e9be430e 100644 --- a/arch/arm/mach-footbridge/cats-pci.c +++ b/arch/arm/mach-footbridge/cats-pci.c @@ -15,14 +15,14 @@ #include <asm/mach-types.h> /* cats host-specific stuff */ -static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 }; +static int irqmap_cats[] = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 }; static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin) { return 0; } -static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +static int cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->irq >= 255) return -1; /* not a valid interrupt. */ diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c index 6f28aaa9ca79..c3f280d08fa7 100644 --- a/arch/arm/mach-footbridge/ebsa285-pci.c +++ b/arch/arm/mach-footbridge/ebsa285-pci.c @@ -14,9 +14,9 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> -static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI }; +static int irqmap_ebsa285[] = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI }; -static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +static int ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->vendor == PCI_VENDOR_ID_CONTAQ && dev->device == PCI_DEVICE_ID_CONTAQ_82C693) diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c index 9473aa0305e5..e8304392074b 100644 --- a/arch/arm/mach-footbridge/netwinder-pci.c +++ b/arch/arm/mach-footbridge/netwinder-pci.c @@ -18,7 +18,7 @@ * We now use the slot ID instead of the device identifiers to select * which interrupt is routed where. */ -static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +static int netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch (slot) { case 0: /* host bridge */ diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c index 4391e433a4b2..9d19aa98a663 100644 --- a/arch/arm/mach-footbridge/personal-pci.c +++ b/arch/arm/mach-footbridge/personal-pci.c @@ -14,13 +14,12 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> -static int irqmap_personal_server[] __initdata = { +static int irqmap_personal_server[] = { IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0, IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI }; -static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) +static int personal_server_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char line; diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c index 07ea28b99cd0..b8d14b369cc9 100644 --- a/arch/arm/mach-hisi/hisilicon.c +++ b/arch/arm/mach-hisi/hisilicon.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * (Hisilicon's SoC based) flattened device tree enabled machine + * (HiSilicon's SoC based) flattened device tree enabled machine * - * Copyright (c) 2012-2013 Hisilicon Ltd. + * Copyright (c) 2012-2013 HiSilicon Ltd. * Copyright (c) 2012-2013 Linaro Ltd. * * Author: Haojian Zhuang <haojian.zhuang@linaro.org> diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index 5c5f255abc3a..c517941416f1 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013 Linaro Ltd. - * Copyright (c) 2013 Hisilicon Limited. + * Copyright (c) 2013 HiSilicon Limited. */ #include <linux/cpu.h> diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c index f155e32f8420..96a484095194 100644 --- a/arch/arm/mach-hisi/platmcpm.c +++ b/arch/arm/mach-hisi/platmcpm.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013-2014 Linaro Ltd. - * Copyright (c) 2013-2014 Hisilicon Limited. + * Copyright (c) 2013-2014 HiSilicon Limited. */ #include <linux/init.h> #include <linux/smp.h> diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index da7a09c1dae5..a56cc64deeb8 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013 Linaro Ltd. - * Copyright (c) 2013 Hisilicon Limited. + * Copyright (c) 2013 HiSilicon Limited. * Based on arch/arm/mach-vexpress/platsmp.c, Copyright (C) 2002 ARM Ltd. */ #include <linux/smp.h> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 52902782cc5f..b407b024dde3 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -63,7 +63,7 @@ config SOC_IMX35 select MXC_AVIC select PINCTRL_IMX35 help - This enables support for Freescale i.MX31 processor + This enables support for Freescale i.MX35 processor endif diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 322caa21bcb3..21bce4049cec 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -7,6 +7,7 @@ #include <linux/module.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> @@ -162,7 +163,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) * interrupts. It registers the interrupt enable and disable functions * to the kernel for each interrupt source. */ -void __init mxc_init_irq(void __iomem *irqbase) +static void __init mxc_init_irq(void __iomem *irqbase) { struct device_node *np; int irq_base; @@ -220,3 +221,16 @@ void __init mxc_init_irq(void __iomem *irqbase) printk(KERN_INFO "MXC IRQ initialized\n"); } + +static int __init imx_avic_init(struct device_node *node, + struct device_node *parent) +{ + void __iomem *avic_base; + + avic_base = of_iomap(node, 0); + BUG_ON(!avic_base); + mxc_init_irq(avic_base); + return 0; +} + +IRQCHIP_DECLARE(imx_avic, "fsl,avic", imx_avic_init); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 2b004cc4f95e..474dedb73bc7 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -22,7 +22,6 @@ void mx35_map_io(void); void imx21_init_early(void); void imx31_init_early(void); void imx35_init_early(void); -void mxc_init_irq(void __iomem *); void mx31_init_irq(void); void mx35_init_irq(void); void mxc_set_cpu_type(unsigned int type); diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c index 32df3b8012f9..8eca92d66a2e 100644 --- a/arch/arm/mach-imx/mach-imx1.c +++ b/arch/arm/mach-imx/mach-imx1.c @@ -17,16 +17,6 @@ static void __init imx1_init_early(void) mxc_set_cpu_type(MXC_CPU_MX1); } -static void __init imx1_init_irq(void) -{ - void __iomem *avic_addr; - - avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K); - WARN_ON(!avic_addr); - - mxc_init_irq(avic_addr); -} - static const char * const imx1_dt_board_compat[] __initconst = { "fsl,imx1", NULL @@ -34,7 +24,6 @@ static const char * const imx1_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") .init_early = imx1_init_early, - .init_irq = imx1_init_irq, .dt_compat = imx1_dt_board_compat, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c index 95de48a1aa7d..51927bd08aef 100644 --- a/arch/arm/mach-imx/mach-imx25.c +++ b/arch/arm/mach-imx/mach-imx25.c @@ -22,17 +22,6 @@ static void __init imx25_dt_init(void) imx_aips_allow_unprivileged_access("fsl,imx25-aips"); } -static void __init mx25_init_irq(void) -{ - struct device_node *np; - void __iomem *avic_base; - - np = of_find_compatible_node(NULL, NULL, "fsl,avic"); - avic_base = of_iomap(np, 0); - BUG_ON(!avic_base); - mxc_init_irq(avic_base); -} - static const char * const imx25_dt_board_compat[] __initconst = { "fsl,imx25", NULL @@ -42,6 +31,5 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .init_early = imx25_init_early, .init_machine = imx25_dt_init, .init_late = imx25_pm_init, - .init_irq = mx25_init_irq, .dt_compat = imx25_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c index 262422a9c196..e325c9468105 100644 --- a/arch/arm/mach-imx/mach-imx27.c +++ b/arch/arm/mach-imx/mach-imx27.c @@ -56,17 +56,6 @@ static void __init imx27_init_early(void) mxc_set_cpu_type(MXC_CPU_MX27); } -static void __init mx27_init_irq(void) -{ - void __iomem *avic_base; - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,avic"); - avic_base = of_iomap(np, 0); - BUG_ON(!avic_base); - mxc_init_irq(avic_base); -} - static const char * const imx27_dt_board_compat[] __initconst = { "fsl,imx27", NULL @@ -75,7 +64,6 @@ static const char * const imx27_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") .map_io = mx27_map_io, .init_early = imx27_init_early, - .init_irq = mx27_init_irq, .init_late = imx27_pm_init, .dt_compat = imx27_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx31.c b/arch/arm/mach-imx/mach-imx31.c index dc69dfe600df..e9a1092b6093 100644 --- a/arch/arm/mach-imx/mach-imx31.c +++ b/arch/arm/mach-imx/mach-imx31.c @@ -14,6 +14,5 @@ static const char * const imx31_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, - .init_irq = mx31_init_irq, .dt_compat = imx31_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx35.c b/arch/arm/mach-imx/mach-imx35.c index ec5c3068715c..0fc08218b77d 100644 --- a/arch/arm/mach-imx/mach-imx35.c +++ b/arch/arm/mach-imx/mach-imx35.c @@ -27,6 +27,5 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)") .l2c_aux_mask = ~0, .map_io = mx35_map_io, .init_early = imx35_init_early, - .init_irq = mx35_init_irq, .dt_compat = imx35_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 5056438e5b42..28db97289ee8 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -109,18 +109,6 @@ void __init imx31_init_early(void) mx3_ccm_base = of_iomap(np, 0); BUG_ON(!mx3_ccm_base); } - -void __init mx31_init_irq(void) -{ - void __iomem *avic_base; - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx31-avic"); - avic_base = of_iomap(np, 0); - BUG_ON(!avic_base); - - mxc_init_irq(avic_base); -} #endif /* ifdef CONFIG_SOC_IMX31 */ #ifdef CONFIG_SOC_IMX35 @@ -158,16 +146,4 @@ void __init imx35_init_early(void) mx3_ccm_base = of_iomap(np, 0); BUG_ON(!mx3_ccm_base); } - -void __init mx35_init_irq(void) -{ - void __iomem *avic_base; - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx35-avic"); - avic_base = of_iomap(np, 0); - BUG_ON(!avic_base); - - mxc_init_irq(avic_base); -} #endif /* ifdef CONFIG_SOC_IMX35 */ diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index e9962b48e30c..2e3af2bc7758 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -45,7 +45,7 @@ * This is also the lowest power state possible without affecting * non-cpu parts of the system. For these reasons, imx5 should default * to always using this state for cpu idling. The PM_SUSPEND_STANDBY also - * uses this state and needs to take no action when registers remain confgiured + * uses this state and needs to take no action when registers remain configured * for this state. */ #define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index cd711bfc591f..2c647bdf8d25 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -65,7 +65,7 @@ static void __init keystone_init(void) static long long __init keystone_pv_fixup(void) { long long offset; - phys_addr_t mem_start, mem_end; + u64 mem_start, mem_end; mem_start = memblock_start_of_DRAM(); mem_end = memblock_end_of_DRAM(); @@ -78,7 +78,7 @@ static long long __init keystone_pv_fixup(void) if (mem_start < KEYSTONE_HIGH_PHYS_START || mem_end > KEYSTONE_HIGH_PHYS_END) { pr_crit("Invalid address space for memory (%08llx-%08llx)\n", - (u64)mem_start, (u64)mem_end); + mem_start, mem_end); return 0; } diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 14a6c3eb3298..f745a65d3bd7 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -15,6 +15,7 @@ #include <linux/platform_data/gpio-omap.h> #include <asm/assembler.h> +#include <asm/irq.h> #include "ams-delta-fiq.h" #include "board-ams-delta.h" diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 97fc2096b970..0411d5508d63 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -1,4 +1,4 @@ -/** +/* * OMAP1 Dual-Mode Timers - platform device registration * * Contains first level initialization routines which internally diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4178c0ee46eb..7df8f5276ddf 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -34,7 +34,6 @@ config ARCH_OMAP4 select ARM_GIC select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PL310_ERRATA_588369 if CACHE_L2X0 @@ -54,7 +53,6 @@ config SOC_OMAP5 select HAVE_ARM_SCU if SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP - select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PM_OPP @@ -90,7 +88,6 @@ config SOC_DRA7XX select HAVE_ARM_ARCH_TIMER select IRQ_CROSSBAR select ARM_ERRATA_798181 if SMP - select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PM_OPP diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 9bcfb34a2206..8306ad686bc8 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -20,14 +20,14 @@ secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) -obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP4) += $(secure-common) obj-$(CONFIG_SOC_AM33XX) += $(secure-common) -obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_OMAP5) += $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(secure-common) -obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_DRA7XX) += $(secure-common) ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),) -obj-y += mcbsp.o +obj-$(CONFIG_OMAP_HWMOD) += mcbsp.o endif obj-$(CONFIG_TWL4030_CORE) += omap_twl.o @@ -207,9 +207,6 @@ obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o obj-$(CONFIG_SOC_TI81XX) += omap_hwmod_81xx_data.o -obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o -obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o -obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 7290f033fd2d..1610c567a6a3 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,7 +33,7 @@ static void __init __maybe_unused omap_generic_init(void) } /* Clocks are needed early, see drivers/clocksource for the rest */ -void __init __maybe_unused omap_init_time_of(void) +static void __init __maybe_unused omap_init_time_of(void) { omap_clk_init(); timer_probe(); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 49926eced5f1..db446f271f5d 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -343,15 +343,6 @@ static inline void omap5_secondary_hyp_startup(void) } #endif -#ifdef CONFIG_SOC_DRA7XX -extern int dra7xx_pciess_reset(struct omap_hwmod *oh); -#else -static inline int dra7xx_pciess_reset(struct omap_hwmod *oh) -{ - return 0; -} -#endif - struct omap_system_dma_plat_info; void pdata_quirks_init(const struct of_device_id *); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 060ba6957b7c..fba0c7aa398c 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -402,6 +402,7 @@ static int __init _omap2_init_reprogram_sdrc(void) return v; } +#ifdef CONFIG_OMAP_HWMOD static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) { return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); @@ -414,6 +415,11 @@ static void __init __maybe_unused omap_hwmod_init_postsetup(void) /* Set the default postsetup state for all hwmods */ omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); } +#else +static inline void omap_hwmod_init_postsetup(void) +{ +} +#endif #ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) @@ -615,8 +621,6 @@ void __init omap4430_init_early(void) omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); - omap44xx_hwmod_init(); - omap_hwmod_init_postsetup(); omap_l2_cache_init(); omap_clk_soc_init = omap4xxx_dt_clk_init; omap_secure_init(); @@ -643,8 +647,6 @@ void __init omap5_init_early(void) omap54xx_voltagedomains_init(); omap54xx_powerdomains_init(); omap54xx_clockdomains_init(); - omap54xx_hwmod_init(); - omap_hwmod_init_postsetup(); omap_clk_soc_init = omap5xxx_dt_clk_init; omap_secure_init(); } @@ -667,8 +669,6 @@ void __init dra7xx_init_early(void) dra7xxx_check_revision(); dra7xx_powerdomains_init(); dra7xx_clockdomains_init(); - dra7xx_hwmod_init(); - omap_hwmod_init_postsetup(); omap_clk_soc_init = dra7xx_dt_clk_init; omap_secure_init(); } diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index f70d561f37f7..0659ab4cb0af 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -9,6 +9,7 @@ */ #include <linux/arm-smccc.h> +#include <linux/cpu_pm.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> @@ -20,6 +21,7 @@ #include "common.h" #include "omap-secure.h" +#include "soc.h" static phys_addr_t omap_secure_memblock_base; @@ -213,3 +215,40 @@ void __init omap_secure_init(void) { omap_optee_init_check(); } + +/* + * Dummy dispatcher call after core OSWR and MPU off. Updates the ROM return + * address after MMU has been re-enabled after CPU1 has been woken up again. + * Otherwise the ROM code will attempt to use the earlier physical return + * address that got set with MMU off when waking up CPU1. Only used on secure + * devices. + */ +static int cpu_notifier(struct notifier_block *nb, unsigned long cmd, void *v) +{ + switch (cmd) { + case CPU_CLUSTER_PM_EXIT: + omap_secure_dispatcher(OMAP4_PPA_SERVICE_0, + FLAG_START_CRITICAL, + 0, 0, 0, 0, 0); + break; + default: + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block secure_notifier_block = { + .notifier_call = cpu_notifier, +}; + +static int __init secure_pm_init(void) +{ + if (omap_type() == OMAP2_DEVICE_TYPE_GP || !soc_is_omap44xx()) + return 0; + + cpu_pm_register_notifier(&secure_notifier_block); + + return 0; +} +omap_arch_initcall(secure_pm_init); diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 4aaa95706d39..172069f31616 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -50,6 +50,7 @@ #define OMAP5_DRA7_MON_SET_ACR_INDEX 0x107 /* Secure PPA(Primary Protected Application) APIs */ +#define OMAP4_PPA_SERVICE_0 0x21 #define OMAP4_PPA_L2_POR_INDEX 0x23 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2310cd56e99b..65934b2924fb 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2137,6 +2137,7 @@ static int of_dev_hwmod_lookup(struct device_node *np, if (res == 0) { *found = fc; *index = i; + of_node_put(np0); return 0; } } @@ -3495,10 +3496,6 @@ static const struct omap_hwmod_reset omap24xx_reset_quirks[] = { { .match = "msdi", .len = 4, .reset = omap_msdi_reset, }, }; -static const struct omap_hwmod_reset dra7_reset_quirks[] = { - { .match = "pcie", .len = 4, .reset = dra7xx_pciess_reset, }, -}; - static const struct omap_hwmod_reset omap_reset_quirks[] = { { .match = "dss_core", .len = 8, .reset = omap_dss_reset, }, { .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, }, @@ -3534,10 +3531,6 @@ omap_hwmod_init_reset_quirks(struct device *dev, struct omap_hwmod *oh, omap24xx_reset_quirks, ARRAY_SIZE(omap24xx_reset_quirks)); - if (soc_is_dra7xx()) - omap_hwmod_init_reset_quirk(dev, oh, data, dra7_reset_quirks, - ARRAY_SIZE(dra7_reset_quirks)); - omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks, ARRAY_SIZE(omap_reset_quirks)); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index eebf2fdf434c..6962a8d267e7 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -607,6 +607,8 @@ struct omap_hwmod { struct omap_hwmod *parent_hwmod; }; +#ifdef CONFIG_OMAP_HWMOD + struct device_node; struct omap_hwmod *omap_hwmod_lookup(const char *name); @@ -656,6 +658,17 @@ extern void __init omap_hwmod_init(void); const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); +#else /* CONFIG_OMAP_HWMOD */ + +static inline int +omap_hwmod_for_each_by_class(const char *classname, + int (*fn)(struct omap_hwmod *oh, void *user), + void *user) +{ + return 0; +} +#endif /* CONFIG_OMAP_HWMOD */ + /* * */ @@ -671,7 +684,6 @@ extern int omap2420_hwmod_init(void); extern int omap2430_hwmod_init(void); extern int omap3xxx_hwmod_init(void); extern int omap44xx_hwmod_init(void); -extern int omap54xx_hwmod_init(void); extern int am33xx_hwmod_init(void); extern int dm814x_hwmod_init(void); extern int dm816x_hwmod_init(void); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c deleted file mode 100644 index 6aa3b8e81a0c..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ /dev/null @@ -1,877 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Hardware modules present on the OMAP44xx chips - * - * Copyright (C) 2009-2012 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Paul Walmsley - * Benoit Cousson - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * Note that this file is currently not in sync with autogeneration scripts. - * The above note to be removed, once it is synced up. - */ - -#include <linux/io.h> - -#include "omap_hwmod.h" -#include "omap_hwmod_common_data.h" -#include "cm1_44xx.h" -#include "cm2_44xx.h" -#include "prm44xx.h" -#include "prm-regbits-44xx.h" - -/* Base offset for all OMAP4 interrupts external to MPUSS */ -#define OMAP44XX_IRQ_GIC_START 32 - -/* - * IP blocks - */ - -/* - * 'dmm' class - * instance(s): dmm - */ -static struct omap_hwmod_class omap44xx_dmm_hwmod_class = { - .name = "dmm", -}; - -/* dmm */ -static struct omap_hwmod omap44xx_dmm_hwmod = { - .name = "dmm", - .class = &omap44xx_dmm_hwmod_class, - .clkdm_name = "l3_emif_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'l3' class - * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3 - */ -static struct omap_hwmod_class omap44xx_l3_hwmod_class = { - .name = "l3", -}; - -/* l3_instr */ -static struct omap_hwmod omap44xx_l3_instr_hwmod = { - .name = "l3_instr", - .class = &omap44xx_l3_hwmod_class, - .clkdm_name = "l3_instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* l3_main_1 */ -static struct omap_hwmod omap44xx_l3_main_1_hwmod = { - .name = "l3_main_1", - .class = &omap44xx_l3_hwmod_class, - .clkdm_name = "l3_1_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET, - }, - }, -}; - -/* l3_main_2 */ -static struct omap_hwmod omap44xx_l3_main_2_hwmod = { - .name = "l3_main_2", - .class = &omap44xx_l3_hwmod_class, - .clkdm_name = "l3_2_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET, - }, - }, -}; - -/* l3_main_3 */ -static struct omap_hwmod omap44xx_l3_main_3_hwmod = { - .name = "l3_main_3", - .class = &omap44xx_l3_hwmod_class, - .clkdm_name = "l3_instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'l4' class - * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup - */ -static struct omap_hwmod_class omap44xx_l4_hwmod_class = { - .name = "l4", -}; - -/* l4_cfg */ -static struct omap_hwmod omap44xx_l4_cfg_hwmod = { - .name = "l4_cfg", - .class = &omap44xx_l4_hwmod_class, - .clkdm_name = "l4_cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET, - }, - }, -}; - -/* l4_per */ -static struct omap_hwmod omap44xx_l4_per_hwmod = { - .name = "l4_per", - .class = &omap44xx_l4_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET, - }, - }, -}; - -/* l4_wkup */ -static struct omap_hwmod omap44xx_l4_wkup_hwmod = { - .name = "l4_wkup", - .class = &omap44xx_l4_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'mpu_bus' class - * instance(s): mpu_private - */ -static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = { - .name = "mpu_bus", -}; - -/* mpu_private */ -static struct omap_hwmod omap44xx_mpu_private_hwmod = { - .name = "mpu_private", - .class = &omap44xx_mpu_bus_hwmod_class, - .clkdm_name = "mpuss_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* - * 'ocp_wp_noc' class - * instance(s): ocp_wp_noc - */ -static struct omap_hwmod_class omap44xx_ocp_wp_noc_hwmod_class = { - .name = "ocp_wp_noc", -}; - -/* ocp_wp_noc */ -static struct omap_hwmod omap44xx_ocp_wp_noc_hwmod = { - .name = "ocp_wp_noc", - .class = &omap44xx_ocp_wp_noc_hwmod_class, - .clkdm_name = "l3_instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * Modules omap_hwmod structures - * - * The following IPs are excluded for the moment because: - * - They do not need an explicit SW control using omap_hwmod API. - * - They still need to be validated with the driver - * properly adapted to omap_hwmod / omap_device - * - * usim - */ - -/* - * 'ctrl_module' class - * attila core control module + core pad control module + wkup pad control - * module + attila wkup control module - */ - -static struct omap_hwmod_class_sysconfig omap44xx_ctrl_module_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_ctrl_module_hwmod_class = { - .name = "ctrl_module", - .sysc = &omap44xx_ctrl_module_sysc, -}; - -/* ctrl_module_core */ -static struct omap_hwmod omap44xx_ctrl_module_core_hwmod = { - .name = "ctrl_module_core", - .class = &omap44xx_ctrl_module_hwmod_class, - .clkdm_name = "l4_cfg_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* ctrl_module_pad_core */ -static struct omap_hwmod omap44xx_ctrl_module_pad_core_hwmod = { - .name = "ctrl_module_pad_core", - .class = &omap44xx_ctrl_module_hwmod_class, - .clkdm_name = "l4_cfg_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* ctrl_module_wkup */ -static struct omap_hwmod omap44xx_ctrl_module_wkup_hwmod = { - .name = "ctrl_module_wkup", - .class = &omap44xx_ctrl_module_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* ctrl_module_pad_wkup */ -static struct omap_hwmod omap44xx_ctrl_module_pad_wkup_hwmod = { - .name = "ctrl_module_pad_wkup", - .class = &omap44xx_ctrl_module_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* - * 'debugss' class - * debug and emulation sub system - */ - -static struct omap_hwmod_class omap44xx_debugss_hwmod_class = { - .name = "debugss", -}; - -/* debugss */ -static struct omap_hwmod omap44xx_debugss_hwmod = { - .name = "debugss", - .class = &omap44xx_debugss_hwmod_class, - .clkdm_name = "emu_sys_clkdm", - .main_clk = "trace_clk_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'emif' class - * external memory interface no1 - */ - -static struct omap_hwmod_class_sysconfig omap44xx_emif_sysc = { - .rev_offs = 0x0000, -}; - -static struct omap_hwmod_class omap44xx_emif_hwmod_class = { - .name = "emif", - .sysc = &omap44xx_emif_sysc, -}; - -/* emif1 */ -static struct omap_hwmod omap44xx_emif1_hwmod = { - .name = "emif1", - .class = &omap44xx_emif_hwmod_class, - .clkdm_name = "l3_emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "ddrphy_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* emif2 */ -static struct omap_hwmod omap44xx_emif2_hwmod = { - .name = "emif2", - .class = &omap44xx_emif_hwmod_class, - .clkdm_name = "l3_emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "ddrphy_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'iss' class - * external images sensor pixel data processor - */ - -static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - /* - * ISS needs 100 OCP clk cycles delay after a softreset before - * accessing sysconfig again. - * The lowest frequency at the moment for L3 bus is 100 MHz, so - * 1usec delay is needed. Add an x2 margin to be safe (2 usecs). - * - * TODO: Indicate errata when available. - */ - .srst_udelay = 2, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_iss_hwmod_class = { - .name = "iss", - .sysc = &omap44xx_iss_sysc, -}; - -/* iss */ -static struct omap_hwmod_opt_clk iss_opt_clks[] = { - { .role = "ctrlclk", .clk = "iss_ctrlclk" }, -}; - -static struct omap_hwmod omap44xx_iss_hwmod = { - .name = "iss", - .class = &omap44xx_iss_hwmod_class, - .clkdm_name = "iss_clkdm", - .main_clk = "ducati_clk_mux_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_CAM_ISS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = iss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(iss_opt_clks), -}; - -/* - * 'mpu' class - * mpu sub-system - */ - -static struct omap_hwmod_class omap44xx_mpu_hwmod_class = { - .name = "mpu", -}; - -/* mpu */ -static struct omap_hwmod omap44xx_mpu_hwmod = { - .name = "mpu", - .class = &omap44xx_mpu_hwmod_class, - .clkdm_name = "mpuss_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_mpu_m2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_MPU_MPU_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'ocmc_ram' class - * top-level core on-chip ram - */ - -static struct omap_hwmod_class omap44xx_ocmc_ram_hwmod_class = { - .name = "ocmc_ram", -}; - -/* ocmc_ram */ -static struct omap_hwmod omap44xx_ocmc_ram_hwmod = { - .name = "ocmc_ram", - .class = &omap44xx_ocmc_ram_hwmod_class, - .clkdm_name = "l3_2_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET, - }, - }, -}; - - -/* - * 'prcm' class - * power and reset manager (part of the prcm infrastructure) + clock manager 2 - * + clock manager 1 (in always on power domain) + local prm in mpu - */ - -static struct omap_hwmod_class omap44xx_prcm_hwmod_class = { - .name = "prcm", -}; - -/* prcm_mpu */ -static struct omap_hwmod omap44xx_prcm_mpu_hwmod = { - .name = "prcm_mpu", - .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_NO_IDLEST, - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* cm_core_aon */ -static struct omap_hwmod omap44xx_cm_core_aon_hwmod = { - .name = "cm_core_aon", - .class = &omap44xx_prcm_hwmod_class, - .flags = HWMOD_NO_IDLEST, - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* cm_core */ -static struct omap_hwmod omap44xx_cm_core_hwmod = { - .name = "cm_core", - .class = &omap44xx_prcm_hwmod_class, - .flags = HWMOD_NO_IDLEST, - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* prm */ -static struct omap_hwmod_rst_info omap44xx_prm_resets[] = { - { .name = "rst_global_warm_sw", .rst_shift = 0 }, - { .name = "rst_global_cold_sw", .rst_shift = 1 }, -}; - -static struct omap_hwmod omap44xx_prm_hwmod = { - .name = "prm", - .class = &omap44xx_prcm_hwmod_class, - .rst_lines = omap44xx_prm_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_prm_resets), -}; - -/* - * 'scrm' class - * system clock and reset manager - */ - -static struct omap_hwmod_class omap44xx_scrm_hwmod_class = { - .name = "scrm", -}; - -/* scrm */ -static struct omap_hwmod omap44xx_scrm_hwmod = { - .name = "scrm", - .class = &omap44xx_scrm_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* - * 'sl2if' class - * shared level 2 memory interface - */ - -static struct omap_hwmod_class omap44xx_sl2if_hwmod_class = { - .name = "sl2if", -}; - -/* sl2if */ -static struct omap_hwmod omap44xx_sl2if_hwmod = { - .name = "sl2if", - .class = &omap44xx_sl2if_hwmod_class, - .clkdm_name = "ivahd_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * interfaces - */ - -/* l3_main_1 -> dmm */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_dmm_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* mpu -> dmm */ -static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_dmm_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_3 -> l3_instr */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = { - .master = &omap44xx_l3_main_3_hwmod, - .slave = &omap44xx_l3_instr_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* ocp_wp_noc -> l3_instr */ -static struct omap_hwmod_ocp_if omap44xx_ocp_wp_noc__l3_instr = { - .master = &omap44xx_ocp_wp_noc_hwmod, - .slave = &omap44xx_l3_instr_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU, -}; - -/* debugss -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = { - .master = &omap44xx_debugss_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "dbgclk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* iss -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = { - .master = &omap44xx_iss_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU, -}; - -/* l4_cfg -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l3_main_3_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_l3_main_3_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l3_main_3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_cfg */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l4_cfg_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> l4_per */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_l4_per_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l4_wkup */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l4_wkup_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> mpu_private */ -static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_mpu_private_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> ocp_wp_noc */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_ocp_wp_noc_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> ctrl_module_core */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_core = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_ctrl_module_core_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> ctrl_module_pad_core */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_pad_core = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_ctrl_module_pad_core_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> ctrl_module_wkup */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__ctrl_module_wkup = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_ctrl_module_wkup_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> ctrl_module_pad_wkup */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__ctrl_module_pad_wkup = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_ctrl_module_pad_wkup_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_instr -> debugss */ -static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = { - .master = &omap44xx_l3_instr_hwmod, - .slave = &omap44xx_debugss_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> iss */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_iss_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> ocmc_ram */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_ocmc_ram_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu_private -> prcm_mpu */ -static struct omap_hwmod_ocp_if omap44xx_mpu_private__prcm_mpu = { - .master = &omap44xx_mpu_private_hwmod, - .slave = &omap44xx_prcm_mpu_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> cm_core_aon */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__cm_core_aon = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_cm_core_aon_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> cm_core */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__cm_core = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_cm_core_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> prm */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__prm = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_prm_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> scrm */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_scrm_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> sl2if */ -static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_sl2if_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> emif1 */ -static struct omap_hwmod_ocp_if omap44xx_mpu__emif1 = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_emif1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> emif2 */ -static struct omap_hwmod_ocp_if omap44xx_mpu__emif2 = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_emif2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { - &omap44xx_l3_main_1__dmm, - &omap44xx_mpu__dmm, - &omap44xx_l3_main_3__l3_instr, - &omap44xx_ocp_wp_noc__l3_instr, - &omap44xx_l3_main_2__l3_main_1, - &omap44xx_l4_cfg__l3_main_1, - &omap44xx_mpu__l3_main_1, - &omap44xx_debugss__l3_main_2, - &omap44xx_iss__l3_main_2, - &omap44xx_l3_main_1__l3_main_2, - &omap44xx_l4_cfg__l3_main_2, - &omap44xx_l3_main_1__l3_main_3, - &omap44xx_l3_main_2__l3_main_3, - &omap44xx_l4_cfg__l3_main_3, - &omap44xx_l3_main_1__l4_cfg, - &omap44xx_l3_main_2__l4_per, - &omap44xx_l4_cfg__l4_wkup, - &omap44xx_mpu__mpu_private, - &omap44xx_l4_cfg__ocp_wp_noc, - &omap44xx_l4_cfg__ctrl_module_core, - &omap44xx_l4_cfg__ctrl_module_pad_core, - &omap44xx_l4_wkup__ctrl_module_wkup, - &omap44xx_l4_wkup__ctrl_module_pad_wkup, - &omap44xx_l3_instr__debugss, - &omap44xx_l3_main_2__iss, - &omap44xx_l3_main_2__ocmc_ram, - &omap44xx_mpu_private__prcm_mpu, - &omap44xx_l4_wkup__cm_core_aon, - &omap44xx_l4_cfg__cm_core, - &omap44xx_l4_wkup__prm, - &omap44xx_l4_wkup__scrm, - /* &omap44xx_l3_main_2__sl2if, */ - &omap44xx_mpu__emif1, - &omap44xx_mpu__emif2, - NULL, -}; - -int __init omap44xx_hwmod_init(void) -{ - omap_hwmod_init(); - return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs); -} - diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c deleted file mode 100644 index 85b9ab4756ed..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ /dev/null @@ -1,467 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Hardware modules present on the OMAP54xx chips - * - * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com - * - * Paul Walmsley - * Benoit Cousson - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - */ - -#include <linux/io.h> -#include <linux/power/smartreflex.h> - -#include "omap_hwmod.h" -#include "omap_hwmod_common_data.h" -#include "cm1_54xx.h" -#include "cm2_54xx.h" -#include "prm54xx.h" - -/* Base offset for all OMAP5 interrupts external to MPUSS */ -#define OMAP54XX_IRQ_GIC_START 32 - -/* - * IP blocks - */ - -/* - * 'dmm' class - * instance(s): dmm - */ -static struct omap_hwmod_class omap54xx_dmm_hwmod_class = { - .name = "dmm", -}; - -/* dmm */ -static struct omap_hwmod omap54xx_dmm_hwmod = { - .name = "dmm", - .class = &omap54xx_dmm_hwmod_class, - .clkdm_name = "emif_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_EMIF_DMM_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_EMIF_DMM_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'l3' class - * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3 - */ -static struct omap_hwmod_class omap54xx_l3_hwmod_class = { - .name = "l3", -}; - -/* l3_instr */ -static struct omap_hwmod omap54xx_l3_instr_hwmod = { - .name = "l3_instr", - .class = &omap54xx_l3_hwmod_class, - .clkdm_name = "l3instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* l3_main_1 */ -static struct omap_hwmod omap54xx_l3_main_1_hwmod = { - .name = "l3_main_1", - .class = &omap54xx_l3_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET, - }, - }, -}; - -/* l3_main_2 */ -static struct omap_hwmod omap54xx_l3_main_2_hwmod = { - .name = "l3_main_2", - .class = &omap54xx_l3_hwmod_class, - .clkdm_name = "l3main2_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3MAIN2_L3_MAIN_2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3MAIN2_L3_MAIN_2_CONTEXT_OFFSET, - }, - }, -}; - -/* l3_main_3 */ -static struct omap_hwmod omap54xx_l3_main_3_hwmod = { - .name = "l3_main_3", - .class = &omap54xx_l3_hwmod_class, - .clkdm_name = "l3instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_MAIN_3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INSTR_L3_MAIN_3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'l4' class - * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup - */ -static struct omap_hwmod_class omap54xx_l4_hwmod_class = { - .name = "l4", -}; - -/* l4_cfg */ -static struct omap_hwmod omap54xx_l4_cfg_hwmod = { - .name = "l4_cfg", - .class = &omap54xx_l4_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET, - }, - }, -}; - -/* l4_per */ -static struct omap_hwmod omap54xx_l4_per_hwmod = { - .name = "l4_per", - .class = &omap54xx_l4_hwmod_class, - .clkdm_name = "l4per_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_L4_PER_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_L4_PER_CONTEXT_OFFSET, - }, - }, -}; - -/* l4_wkup */ -static struct omap_hwmod omap54xx_l4_wkup_hwmod = { - .name = "l4_wkup", - .class = &omap54xx_l4_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'mpu_bus' class - * instance(s): mpu_private - */ -static struct omap_hwmod_class omap54xx_mpu_bus_hwmod_class = { - .name = "mpu_bus", -}; - -/* mpu_private */ -static struct omap_hwmod omap54xx_mpu_private_hwmod = { - .name = "mpu_private", - .class = &omap54xx_mpu_bus_hwmod_class, - .clkdm_name = "mpu_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* - * 'emif' class - * external memory interface no1 (wrapper) - */ - -static struct omap_hwmod_class_sysconfig omap54xx_emif_sysc = { - .rev_offs = 0x0000, -}; - -static struct omap_hwmod_class omap54xx_emif_hwmod_class = { - .name = "emif", - .sysc = &omap54xx_emif_sysc, -}; - -/* emif1 */ -static struct omap_hwmod omap54xx_emif1_hwmod = { - .name = "emif1", - .class = &omap54xx_emif_hwmod_class, - .clkdm_name = "emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_core_h11x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_EMIF_EMIF1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* emif2 */ -static struct omap_hwmod omap54xx_emif2_hwmod = { - .name = "emif2", - .class = &omap54xx_emif_hwmod_class, - .clkdm_name = "emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_core_h11x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_EMIF_EMIF2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - - - - -/* - * 'mpu' class - * mpu sub-system - */ - -static struct omap_hwmod_class omap54xx_mpu_hwmod_class = { - .name = "mpu", -}; - -/* mpu */ -static struct omap_hwmod omap54xx_mpu_hwmod = { - .name = "mpu", - .class = &omap54xx_mpu_hwmod_class, - .clkdm_name = "mpu_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_mpu_m2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_MPU_MPU_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_MPU_MPU_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'sata' class - * sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx) - */ - -static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = { - .rev_offs = 0x00fc, - .sysc_offs = 0x0000, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_sata_hwmod_class = { - .name = "sata", - .sysc = &omap54xx_sata_sysc, -}; - -/* sata */ -static struct omap_hwmod omap54xx_sata_hwmod = { - .name = "sata", - .class = &omap54xx_sata_hwmod_class, - .clkdm_name = "l3init_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "func_48m_fclk", - .mpu_rt_idx = 1, - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* l4_cfg -> sata */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_sata_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* - * Interfaces - */ - -/* l3_main_1 -> dmm */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__dmm = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_dmm_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_SDMA, -}; - -/* l3_main_3 -> l3_instr */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_3__l3_instr = { - .master = &omap54xx_l3_main_3_hwmod, - .slave = &omap54xx_l3_instr_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_1 = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_l3_main_1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_l3_main_1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = { - .master = &omap54xx_mpu_hwmod, - .slave = &omap54xx_l3_main_1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_1 -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_2 = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_l3_main_2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l4_cfg -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_l3_main_2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_l3_main_3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_3 = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_l3_main_3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_3 = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_l3_main_3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_cfg */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_cfg = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_l4_cfg_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> l4_per */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l4_per = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_l4_per_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_wkup */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_wkup = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_l4_wkup_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> mpu_private */ -static struct omap_hwmod_ocp_if omap54xx_mpu__mpu_private = { - .master = &omap54xx_mpu_hwmod, - .slave = &omap54xx_mpu_private_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> emif1 */ -static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = { - .master = &omap54xx_mpu_hwmod, - .slave = &omap54xx_emif1_hwmod, - .clk = "dpll_core_h11x2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> emif2 */ -static struct omap_hwmod_ocp_if omap54xx_mpu__emif2 = { - .master = &omap54xx_mpu_hwmod, - .slave = &omap54xx_emif2_hwmod, - .clk = "dpll_core_h11x2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> mpu */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_mpu_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { - &omap54xx_l3_main_1__dmm, - &omap54xx_l3_main_3__l3_instr, - &omap54xx_l3_main_2__l3_main_1, - &omap54xx_l4_cfg__l3_main_1, - &omap54xx_mpu__l3_main_1, - &omap54xx_l3_main_1__l3_main_2, - &omap54xx_l4_cfg__l3_main_2, - &omap54xx_l3_main_1__l3_main_3, - &omap54xx_l3_main_2__l3_main_3, - &omap54xx_l4_cfg__l3_main_3, - &omap54xx_l3_main_1__l4_cfg, - &omap54xx_l3_main_2__l4_per, - &omap54xx_l3_main_1__l4_wkup, - &omap54xx_mpu__mpu_private, - &omap54xx_mpu__emif1, - &omap54xx_mpu__emif2, - &omap54xx_l4_cfg__mpu, - &omap54xx_l4_cfg__sata, - NULL, -}; - -int __init omap54xx_hwmod_init(void) -{ - omap_hwmod_init(); - return omap_hwmod_register_links(omap54xx_hwmod_ocp_ifs); -} diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c deleted file mode 100644 index 48c2a808bd46..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ /dev/null @@ -1,719 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Hardware modules present on the DRA7xx chips - * - * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com - * - * Paul Walmsley - * Benoit Cousson - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - */ - -#include <linux/io.h> - -#include "omap_hwmod.h" -#include "omap_hwmod_common_data.h" -#include "cm1_7xx.h" -#include "cm2_7xx.h" -#include "prm7xx.h" -#include "soc.h" - -/* Base offset for all DRA7XX interrupts external to MPUSS */ -#define DRA7XX_IRQ_GIC_START 32 - -/* - * IP blocks - */ - -/* - * 'dmm' class - * instance(s): dmm - */ -static struct omap_hwmod_class dra7xx_dmm_hwmod_class = { - .name = "dmm", -}; - -/* dmm */ -static struct omap_hwmod dra7xx_dmm_hwmod = { - .name = "dmm", - .class = &dra7xx_dmm_hwmod_class, - .clkdm_name = "emif_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'l3' class - * instance(s): l3_instr, l3_main_1, l3_main_2 - */ -static struct omap_hwmod_class dra7xx_l3_hwmod_class = { - .name = "l3", -}; - -/* l3_instr */ -static struct omap_hwmod dra7xx_l3_instr_hwmod = { - .name = "l3_instr", - .class = &dra7xx_l3_hwmod_class, - .clkdm_name = "l3instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* l3_main_1 */ -static struct omap_hwmod dra7xx_l3_main_1_hwmod = { - .name = "l3_main_1", - .class = &dra7xx_l3_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET, - }, - }, -}; - -/* l3_main_2 */ -static struct omap_hwmod dra7xx_l3_main_2_hwmod = { - .name = "l3_main_2", - .class = &dra7xx_l3_hwmod_class, - .clkdm_name = "l3instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INSTR_L3_MAIN_2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'l4' class - * instance(s): l4_cfg, l4_per1, l4_per2, l4_per3, l4_wkup - */ -static struct omap_hwmod_class dra7xx_l4_hwmod_class = { - .name = "l4", -}; - -/* l4_cfg */ -static struct omap_hwmod dra7xx_l4_cfg_hwmod = { - .name = "l4_cfg", - .class = &dra7xx_l4_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET, - }, - }, -}; - -/* l4_per1 */ -static struct omap_hwmod dra7xx_l4_per1_hwmod = { - .name = "l4_per1", - .class = &dra7xx_l4_hwmod_class, - .clkdm_name = "l4per_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_L4_PER1_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* l4_per2 */ -static struct omap_hwmod dra7xx_l4_per2_hwmod = { - .name = "l4_per2", - .class = &dra7xx_l4_hwmod_class, - .clkdm_name = "l4per2_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* l4_per3 */ -static struct omap_hwmod dra7xx_l4_per3_hwmod = { - .name = "l4_per3", - .class = &dra7xx_l4_hwmod_class, - .clkdm_name = "l4per3_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* l4_wkup */ -static struct omap_hwmod dra7xx_l4_wkup_hwmod = { - .name = "l4_wkup", - .class = &dra7xx_l4_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'atl' class - * - */ - -static struct omap_hwmod_class dra7xx_atl_hwmod_class = { - .name = "atl", -}; - -/* atl */ -static struct omap_hwmod dra7xx_atl_hwmod = { - .name = "atl", - .class = &dra7xx_atl_hwmod_class, - .clkdm_name = "atl_clkdm", - .main_clk = "atl_gfclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_ATL_ATL_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_ATL_ATL_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'bb2d' class - * - */ - -static struct omap_hwmod_class dra7xx_bb2d_hwmod_class = { - .name = "bb2d", -}; - -/* bb2d */ -static struct omap_hwmod dra7xx_bb2d_hwmod = { - .name = "bb2d", - .class = &dra7xx_bb2d_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dpll_core_h24x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_DSS_BB2D_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_DSS_BB2D_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'ctrl_module' class - * - */ - -static struct omap_hwmod_class dra7xx_ctrl_module_hwmod_class = { - .name = "ctrl_module", -}; - -/* ctrl_module_wkup */ -static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = { - .name = "ctrl_module_wkup", - .class = &dra7xx_ctrl_module_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* - * 'mpu' class - * - */ - -static struct omap_hwmod_class dra7xx_mpu_hwmod_class = { - .name = "mpu", -}; - -/* mpu */ -static struct omap_hwmod dra7xx_mpu_hwmod = { - .name = "mpu", - .class = &dra7xx_mpu_hwmod_class, - .clkdm_name = "mpu_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, - .main_clk = "dpll_mpu_m2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_MPU_MPU_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_MPU_MPU_CONTEXT_OFFSET, - }, - }, -}; - - -/* - * 'PCIE' class - * - */ - -/* - * As noted in documentation for _reset() in omap_hwmod.c, the stock reset - * functionality of OMAP HWMOD layer does not deassert the hardreset lines - * associated with an IP automatically leaving the driver to handle that - * by itself. This does not work for PCIeSS which needs the reset lines - * deasserted for the driver to start accessing registers. - * - * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset - * lines after asserting them. - */ -int dra7xx_pciess_reset(struct omap_hwmod *oh) -{ - int i; - - for (i = 0; i < oh->rst_lines_cnt; i++) { - omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name); - omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name); - } - - return 0; -} - -static struct omap_hwmod_class dra7xx_pciess_hwmod_class = { - .name = "pcie", - .reset = dra7xx_pciess_reset, -}; - -/* pcie1 */ -static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = { - { .name = "pcie", .rst_shift = 0 }, -}; - -static struct omap_hwmod dra7xx_pciess1_hwmod = { - .name = "pcie1", - .class = &dra7xx_pciess_hwmod_class, - .clkdm_name = "pcie_clkdm", - .rst_lines = dra7xx_pciess1_resets, - .rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess1_resets), - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET, - .rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* pcie2 */ -static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = { - { .name = "pcie", .rst_shift = 1 }, -}; - -/* pcie2 */ -static struct omap_hwmod dra7xx_pciess2_hwmod = { - .name = "pcie2", - .class = &dra7xx_pciess_hwmod_class, - .clkdm_name = "pcie_clkdm", - .rst_lines = dra7xx_pciess2_resets, - .rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess2_resets), - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET, - .rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'qspi' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_qspi_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0010, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_qspi_hwmod_class = { - .name = "qspi", - .sysc = &dra7xx_qspi_sysc, -}; - -/* qspi */ -static struct omap_hwmod dra7xx_qspi_hwmod = { - .name = "qspi", - .class = &dra7xx_qspi_hwmod_class, - .clkdm_name = "l4per2_clkdm", - .main_clk = "qspi_gfclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER2_QSPI_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER2_QSPI_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'sata' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_sata_sysc = { - .rev_offs = 0x00fc, - .sysc_offs = 0x0000, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_sata_hwmod_class = { - .name = "sata", - .sysc = &dra7xx_sata_sysc, -}; - -/* sata */ - -static struct omap_hwmod dra7xx_sata_hwmod = { - .name = "sata", - .class = &dra7xx_sata_hwmod_class, - .clkdm_name = "l3init_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "func_48m_fclk", - .mpu_rt_idx = 1, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'vcp' class - * - */ - -static struct omap_hwmod_class dra7xx_vcp_hwmod_class = { - .name = "vcp", -}; - -/* vcp1 */ -static struct omap_hwmod dra7xx_vcp1_hwmod = { - .name = "vcp1", - .class = &dra7xx_vcp_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_VCP1_CONTEXT_OFFSET, - }, - }, -}; - -/* vcp2 */ -static struct omap_hwmod dra7xx_vcp2_hwmod = { - .name = "vcp2", - .class = &dra7xx_vcp_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_VCP2_CONTEXT_OFFSET, - }, - }, -}; - - - -/* - * Interfaces - */ - -/* l3_main_1 -> dmm */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dmm = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_dmm_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_SDMA, -}; - -/* l3_main_2 -> l3_instr */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = { - .master = &dra7xx_l3_main_2_hwmod, - .slave = &dra7xx_l3_instr_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_1 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_l3_main_1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l3_main_1 */ -static struct omap_hwmod_ocp_if dra7xx_mpu__l3_main_1 = { - .master = &dra7xx_mpu_hwmod, - .slave = &dra7xx_l3_main_1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_1 -> l3_main_2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l3_main_2 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l3_main_2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l4_cfg -> l3_main_2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_2 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_l3_main_2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_cfg */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_cfg = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l4_cfg_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_per1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per1 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l4_per1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_per2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per2 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l4_per2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_per3 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per3 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l4_per3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_wkup */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_wkup = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l4_wkup_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per2 -> atl */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__atl = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_atl_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> bb2d */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_bb2d_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> ctrl_module_wkup */ -static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = { - .master = &dra7xx_l4_wkup_hwmod, - .slave = &dra7xx_ctrl_module_wkup_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> mpu */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_mpu_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> pciess1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pciess1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pciess1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pciess1_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> pciess2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pciess2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pciess2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pciess2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> qspi */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_qspi_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> sata */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_sata_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> vcp1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_vcp1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per2 -> vcp1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp1 = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_vcp1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> vcp2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp2 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_vcp2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per2 -> vcp2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_vcp2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { - &dra7xx_l3_main_1__dmm, - &dra7xx_l3_main_2__l3_instr, - &dra7xx_l4_cfg__l3_main_1, - &dra7xx_mpu__l3_main_1, - &dra7xx_l3_main_1__l3_main_2, - &dra7xx_l4_cfg__l3_main_2, - &dra7xx_l3_main_1__l4_cfg, - &dra7xx_l3_main_1__l4_per1, - &dra7xx_l3_main_1__l4_per2, - &dra7xx_l3_main_1__l4_per3, - &dra7xx_l3_main_1__l4_wkup, - &dra7xx_l4_per2__atl, - &dra7xx_l3_main_1__bb2d, - &dra7xx_l4_wkup__ctrl_module_wkup, - &dra7xx_l4_cfg__mpu, - &dra7xx_l3_main_1__pciess1, - &dra7xx_l4_cfg__pciess1, - &dra7xx_l3_main_1__pciess2, - &dra7xx_l4_cfg__pciess2, - &dra7xx_l3_main_1__qspi, - &dra7xx_l4_cfg__sata, - &dra7xx_l3_main_1__vcp1, - &dra7xx_l4_per2__vcp1, - &dra7xx_l3_main_1__vcp2, - &dra7xx_l4_per2__vcp2, - NULL, -}; - -/* SoC variant specific hwmod links */ -static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = { - NULL, -}; - -static struct omap_hwmod_ocp_if *rtc_hwmod_ocp_ifs[] __initdata = { - NULL, -}; - -int __init dra7xx_hwmod_init(void) -{ - int ret; - - omap_hwmod_init(); - ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); - - if (!ret && soc_is_dra74x()) { - ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); - } else if (!ret && soc_is_dra72x()) { - ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs); - if (!ret && !of_machine_is_compatible("ti,dra718")) - ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); - } else if (!ret && soc_is_dra76x()) { - if (!ret && soc_is_dra76x_abz()) - ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); - } - - return ret; -} diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index a642d3b39e50..d4dab041324d 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only -/** +/* * OMAP and TWL PMIC specific initializations. * * Copyright (C) 2010 Texas Instruments Incorporated. diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 2e3a10914c40..3405aa815a24 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -443,7 +443,7 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; } -#if IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) +#if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) static struct omap_mcbsp_platform_data mcbsp_pdata; static void __init omap3_mcbsp_init(void) { @@ -569,10 +569,29 @@ static void pdata_quirks_check(struct pdata_init *quirks) } } -void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) +static const char * const pdata_quirks_init_nodes[] = { + "prcm", + "prm", +}; + +void __init +pdata_quirks_init_clocks(const struct of_device_id *omap_dt_match_table) { struct device_node *np; + int i; + + for (i = 0; i < ARRAY_SIZE(pdata_quirks_init_nodes); i++) { + np = of_find_node_by_name(NULL, pdata_quirks_init_nodes[i]); + if (!np) + continue; + + of_platform_populate(np, omap_dt_match_table, + omap_auxdata_lookup, NULL); + } +} +void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) +{ /* * We still need this for omap2420 and omap3 PM to work, others are * using drivers/misc/sram.c already. @@ -585,13 +604,7 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) omap3_mcbsp_init(); pdata_quirks_check(auxdata_quirks); - /* Populate always-on PRCM in l4_wkup to probe l4_wkup */ - np = of_find_node_by_name(NULL, "prcm"); - if (!np) - np = of_find_node_by_name(NULL, "prm"); - if (np) - of_platform_populate(np, omap_dt_match_table, - omap_auxdata_lookup, NULL); + pdata_quirks_init_clocks(omap_dt_match_table); of_platform_populate(NULL, omap_dt_match_table, omap_auxdata_lookup, NULL); diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 919d35d5b325..b43eab9879d3 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -168,8 +168,8 @@ static int pwrdm_suspend_set(void *data, u64 val) return -EINVAL; } -DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get, - pwrdm_suspend_set, "%llu\n"); +DEFINE_DEBUGFS_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get, + pwrdm_suspend_set, "%llu\n"); static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir) { diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c index 09076ad0576d..668dc84fd31e 100644 --- a/arch/arm/mach-omap2/pmic-cpcap.c +++ b/arch/arm/mach-omap2/pmic-cpcap.c @@ -246,10 +246,10 @@ int __init omap4_cpcap_init(void) omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu); if (of_machine_is_compatible("motorola,droid-bionic")) { - voltdm = voltdm_lookup("mpu"); + voltdm = voltdm_lookup("core"); omap_voltage_register_pmic(voltdm, &omap_cpcap_core); - voltdm = voltdm_lookup("mpu"); + voltdm = voltdm_lookup("iva"); omap_voltage_register_pmic(voltdm, &omap_cpcap_iva); } else { voltdm = voltdm_lookup("core"); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 1cbac76136d4..0a5b87e2a4b0 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -1202,26 +1202,26 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm) if (!pwrdm) { pr_debug("powerdomain: %s: invalid powerdomain pointer\n", __func__); - return 1; + return true; } if (pwrdm->pwrsts & PWRSTS_OFF) - return 1; + return true; if (pwrdm->pwrsts & PWRSTS_RET) { if (pwrdm->pwrsts_logic_ret & PWRSTS_OFF) - return 1; + return true; for (i = 0; i < pwrdm->banks; i++) if (pwrdm->pwrsts_mem_ret[i] & PWRSTS_OFF) - return 1; + return true; } for (i = 0; i < pwrdm->banks; i++) if (pwrdm->pwrsts_mem_on[i] & PWRSTS_OFF) - return 1; + return true; - return 0; + return false; } /** diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 62df666c2bd0..db672cf19a51 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -88,34 +88,26 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, extern struct omap_sr_data omap_sr_pdata[]; -static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +static int __init sr_init_by_name(const char *name, const char *voltdm) { struct omap_sr_data *sr_data = NULL; struct omap_volt_data *volt_data; - struct omap_smartreflex_dev_attr *sr_dev_attr; static int i; - if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) || - !strncmp(oh->name, "smartreflex_mpu", 16)) + if (!strncmp(name, "smartreflex_mpu_iva", 20) || + !strncmp(name, "smartreflex_mpu", 16)) sr_data = &omap_sr_pdata[OMAP_SR_MPU]; - else if (!strncmp(oh->name, "smartreflex_core", 17)) + else if (!strncmp(name, "smartreflex_core", 17)) sr_data = &omap_sr_pdata[OMAP_SR_CORE]; - else if (!strncmp(oh->name, "smartreflex_iva", 16)) + else if (!strncmp(name, "smartreflex_iva", 16)) sr_data = &omap_sr_pdata[OMAP_SR_IVA]; if (!sr_data) { - pr_err("%s: Unknown instance %s\n", __func__, oh->name); + pr_err("%s: Unknown instance %s\n", __func__, name); return -EINVAL; } - sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; - if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { - pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", - __func__, oh->name); - goto exit; - } - - sr_data->name = oh->name; + sr_data->name = name; if (cpu_is_omap343x()) sr_data->ip_type = 1; else @@ -136,10 +128,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) } } - sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); + sr_data->voltdm = voltdm_lookup(voltdm); if (!sr_data->voltdm) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", - __func__, sr_dev_attr->sensor_voltdm_name); + __func__, voltdm); goto exit; } @@ -160,6 +152,27 @@ exit: return 0; } +#ifdef CONFIG_OMAP_HWMOD +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +{ + struct omap_smartreflex_dev_attr *sr_dev_attr; + + sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; + if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { + pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", + __func__, oh->name); + return 0; + } + + return sr_init_by_name(oh->name, sr_dev_attr->sensor_voltdm_name); +} +#else +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +{ + return -EINVAL; +} +#endif + /* * API to be called from board files to enable smartreflex * autocompensation at init. @@ -169,7 +182,42 @@ void __init omap_enable_smartreflex_on_init(void) sr_enable_on_init = true; } +static const char * const omap4_sr_instances[] = { + "mpu", + "iva", + "core", +}; + +static const char * const dra7_sr_instances[] = { + "mpu", + "core", +}; + int __init omap_devinit_smartreflex(void) { + const char * const *sr_inst = NULL; + int i, nr_sr = 0; + + if (soc_is_omap44xx()) { + sr_inst = omap4_sr_instances; + nr_sr = ARRAY_SIZE(omap4_sr_instances); + + } else if (soc_is_dra7xx()) { + sr_inst = dra7_sr_instances; + nr_sr = ARRAY_SIZE(dra7_sr_instances); + } + + if (nr_sr) { + const char *name, *voltdm; + + for (i = 0; i < nr_sr; i++) { + name = kasprintf(GFP_KERNEL, "smartreflex_%s", sr_inst[i]); + voltdm = sr_inst[i]; + sr_init_by_name(name, voltdm); + } + + return 0; + } + return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d1010ec26e9f..d237bd030238 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -502,16 +502,20 @@ static inline void mainstone_init_keypad(void) {} #endif static int mst_pcmcia0_irqs[11] = { - [0 ... 10] = -1, + [0 ... 4] = -1, [5] = MAINSTONE_S0_CD_IRQ, + [6 ... 7] = -1, [8] = MAINSTONE_S0_STSCHG_IRQ, + [9] = -1, [10] = MAINSTONE_S0_IRQ, }; static int mst_pcmcia1_irqs[11] = { - [0 ... 10] = -1, + [0 ... 4] = -1, [5] = MAINSTONE_S1_CD_IRQ, + [6 ... 7] = -1, [8] = MAINSTONE_S1_STSCHG_IRQ, + [9] = -1, [10] = MAINSTONE_S1_IRQ, }; diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c index 45c19ca96f7a..ec0d9b094744 100644 --- a/arch/arm/mach-pxa/pxa_cplds_irqs.c +++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c @@ -147,22 +147,20 @@ static int cplds_probe(struct platform_device *pdev) } irq_set_irq_wake(fpga->irq, 1); - fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node, - CPLDS_NB_IRQ, - &cplds_irq_domain_ops, fpga); + if (base_irq) + fpga->irqdomain = irq_domain_add_legacy(pdev->dev.of_node, + CPLDS_NB_IRQ, + base_irq, 0, + &cplds_irq_domain_ops, + fpga); + else + fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node, + CPLDS_NB_IRQ, + &cplds_irq_domain_ops, + fpga); if (!fpga->irqdomain) return -ENODEV; - if (base_irq) { - ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0, - CPLDS_NB_IRQ); - if (ret) { - dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n", - base_irq, base_irq + CPLDS_NB_IRQ); - return ret; - } - } - return 0; } diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c index 6e19add158a9..a3f46aa61c45 100644 --- a/arch/arm/mach-s3c/mach-rx1950.c +++ b/arch/arm/mach-s3c/mach-rx1950.c @@ -384,6 +384,8 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = { static struct pwm_lookup rx1950_pwm_lookup[] = { PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000, PWM_POLARITY_NORMAL), + PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", "RX1950 LCD", LCD_PWM_PERIOD, + PWM_POLARITY_NORMAL), }; static struct pwm_device *lcd_pwm; @@ -498,19 +500,18 @@ static void rx1950_bl_power(int enable) static int rx1950_backlight_init(struct device *dev) { WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight")); - lcd_pwm = pwm_request(1, "RX1950 LCD"); + lcd_pwm = pwm_get(dev, "RX1950 LCD"); if (IS_ERR(lcd_pwm)) { dev_err(dev, "Unable to request PWM for LCD power!\n"); return PTR_ERR(lcd_pwm); } /* - * This is only required to initialize .polarity; all other values are - * fixed in this driver. + * Call pwm_init_state to initialize .polarity and .period. The other + * values are fixed in this driver. */ pwm_init_state(lcd_pwm, &lcd_pwm_state); - lcd_pwm_state.period = LCD_PWM_PERIOD; lcd_pwm_state.duty_cycle = LCD_PWM_DUTY; rx1950_lcd_power(1); @@ -524,7 +525,7 @@ static void rx1950_backlight_exit(struct device *dev) rx1950_bl_power(0); rx1950_lcd_power(0); - pwm_free(lcd_pwm); + pwm_put(lcd_pwm); gpio_free(S3C2410_GPB(0)); } diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 0810f3abd810..415d8ad2a3c1 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -86,7 +86,7 @@ static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) } #ifdef CONFIG_HOTPLUG_CPU -void ux500_cpu_die(unsigned int cpu) +static void ux500_cpu_die(unsigned int cpu) { wfi(); } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index a25b660c3017..c1e12aab67b8 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -387,8 +387,7 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot) pte_t *pte = pte_offset_fixmap(pmd_off_k(vaddr), vaddr); /* Make sure fixmap region does not exceed available allocation. */ - BUILD_BUG_ON(FIXADDR_START + (__end_of_fixed_addresses * PAGE_SIZE) > - FIXADDR_END); + BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) < FIXADDR_START); BUG_ON(idx >= __end_of_fixed_addresses); /* we only support device mappings until pgprot_kernel has been set */ diff --git a/arch/arm/mm/pmsa-v7.c b/arch/arm/mm/pmsa-v7.c index 88950e41a3a9..59d916ccdf25 100644 --- a/arch/arm/mm/pmsa-v7.c +++ b/arch/arm/mm/pmsa-v7.c @@ -235,6 +235,7 @@ void __init pmsav7_adjust_lowmem_bounds(void) phys_addr_t mem_end; phys_addr_t reg_start, reg_end; unsigned int mem_max_regions; + bool first = true; int num; u64 i; @@ -263,7 +264,7 @@ void __init pmsav7_adjust_lowmem_bounds(void) #endif for_each_mem_range(i, ®_start, ®_end) { - if (i == 0) { + if (first) { phys_addr_t phys_offset = PHYS_OFFSET; /* @@ -275,6 +276,7 @@ void __init pmsav7_adjust_lowmem_bounds(void) mem_start = reg_start; mem_end = reg_end; specified_mem_size = mem_end - mem_start; + first = false; } else { /* * memblock auto merges contiguous blocks, remove diff --git a/arch/arm/mm/pmsa-v8.c b/arch/arm/mm/pmsa-v8.c index 2de019f7503e..8359748a19a1 100644 --- a/arch/arm/mm/pmsa-v8.c +++ b/arch/arm/mm/pmsa-v8.c @@ -95,10 +95,11 @@ void __init pmsav8_adjust_lowmem_bounds(void) { phys_addr_t mem_end; phys_addr_t reg_start, reg_end; + bool first = true; u64 i; for_each_mem_range(i, ®_start, ®_end) { - if (i == 0) { + if (first) { phys_addr_t phys_offset = PHYS_OFFSET; /* @@ -107,6 +108,7 @@ void __init pmsav8_adjust_lowmem_bounds(void) if (reg_start != phys_offset) panic("First memory bank must be contiguous from PHYS_OFFSET"); mem_end = reg_end; + first = false; } else { /* * memblock auto merges contiguous blocks, remove diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 1eb59003bdec..9f11de46aaa9 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -85,7 +85,7 @@ static int dma_lch_count; static int dma_chan_count; static int omap_dma_reserve_channels; -static spinlock_t dma_chan_lock; +static DEFINE_SPINLOCK(dma_chan_lock); static struct omap_dma_lch *dma_chan; static inline void disable_lnk(int lch); @@ -902,7 +902,6 @@ static int omap_system_dma_probe(struct platform_device *pdev) if (!dma_chan) return -ENOMEM; - spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { omap_clear_dma(ch); diff --git a/arch/arm/probes/uprobes/core.c b/arch/arm/probes/uprobes/core.c index c4b49b322e8a..f5f790c6e5f8 100644 --- a/arch/arm/probes/uprobes/core.c +++ b/arch/arm/probes/uprobes/core.c @@ -204,7 +204,7 @@ unsigned long uprobe_get_swbp_addr(struct pt_regs *regs) static struct undef_hook uprobes_arm_break_hook = { .instr_mask = 0x0fffffff, .instr_val = (UPROBE_SWBP_ARM_INSN & 0x0fffffff), - .cpsr_mask = MODE_MASK, + .cpsr_mask = (PSR_T_BIT | MODE_MASK), .cpsr_val = USR_MODE, .fn = uprobe_trap_handler, }; @@ -212,7 +212,7 @@ static struct undef_hook uprobes_arm_break_hook = { static struct undef_hook uprobes_arm_ss_hook = { .instr_mask = 0x0fffffff, .instr_val = (UPROBE_SS_ARM_INSN & 0x0fffffff), - .cpsr_mask = MODE_MASK, + .cpsr_mask = (PSR_T_BIT | MODE_MASK), .cpsr_val = USR_MODE, .fn = uprobe_trap_handler, }; diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 467fa225c3d0..e1b12b242a32 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -135,10 +135,22 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order) return; } +int xen_swiotlb_detect(void) +{ + if (!xen_domain()) + return 0; + if (xen_feature(XENFEAT_direct_mapped)) + return 1; + /* legacy case */ + if (!xen_feature(XENFEAT_not_direct_mapped) && xen_initial_domain()) + return 1; + return 0; +} + static int __init xen_mm_init(void) { struct gnttab_cache_flush cflush; - if (!xen_initial_domain()) + if (!xen_swiotlb_detect()) return 0; xen_swiotlb_init(1, false); diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index acb464547a54..84a1cea1f43b 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -11,6 +11,7 @@ #include <xen/xen.h> #include <xen/interface/memory.h> +#include <xen/grant_table.h> #include <xen/page.h> #include <xen/swiotlb-xen.h> @@ -109,7 +110,7 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops, map_ops[i].status = GNTST_general_error; unmap.host_addr = map_ops[i].host_addr, unmap.handle = map_ops[i].handle; - map_ops[i].handle = ~0; + map_ops[i].handle = INVALID_GRANT_HANDLE; if (map_ops[i].flags & GNTMAP_device_map) unmap.dev_bus_addr = map_ops[i].dev_bus_addr; else @@ -130,7 +131,6 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops, return 0; } -EXPORT_SYMBOL_GPL(set_foreign_p2m_mapping); int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops, struct gnttab_unmap_grant_ref *kunmap_ops, @@ -145,7 +145,6 @@ int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops, return 0; } -EXPORT_SYMBOL_GPL(clear_foreign_p2m_mapping); bool __set_phys_to_machine_multi(unsigned long pfn, unsigned long mfn, unsigned long nr_pages) |