diff options
Diffstat (limited to 'arch/arm/boot/dts/tegra30-cardhu-a04.dts')
| -rw-r--r-- | arch/arm/boot/dts/tegra30-cardhu-a04.dts | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index d0db6c7e774f..bf012bddaafb 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "tegra30-cardhu.dtsi" +#include "tegra30-cardhu.dtsi" /* This dts file support the cardhu A04 and later versions of board */ @@ -22,7 +22,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 7 0>; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; sys_3v3_reg: regulator@101 { @@ -34,7 +34,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&pmic 6 0>; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; usb1_vbus_reg: regulator@102 { @@ -44,7 +44,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 238 0>; /* GPIO PDD6 */ + gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -56,7 +56,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&gpio 236 0>; /* GPIO PDD4 */ + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; gpio-open-drain; vin-supply = <&vdd_5v0_reg>; }; @@ -68,7 +68,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pmic 8 0>; + gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; }; vdd_bl_reg: regulator@105 { @@ -80,7 +80,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 234 0>; /* GPIO PDD2 */ + gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; }; vdd_bl2_reg: regulator@106 { @@ -92,13 +92,13 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio 232 0>; /* GPIO PDD0 */ + gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; }; sdhci@78000400 { status = "okay"; - power-gpios = <&gpio 27 0>; /* gpio PD3 */ + power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; |