diff options
Diffstat (limited to 'Documentation')
11 files changed, 415 insertions, 32 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-chromeos b/Documentation/ABI/testing/sysfs-class-chromeos new file mode 100644 index 000000000000..5819699d66ec --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-chromeos @@ -0,0 +1,32 @@ +What: /sys/class/chromeos/<ec-device-name>/flashinfo +Date: August 2015 +KernelVersion: 4.2 +Description: + Show the EC flash information. + +What: /sys/class/chromeos/<ec-device-name>/kb_wake_angle +Date: March 2018 +KernelVersion: 4.17 +Description: + Control the keyboard wake lid angle. Values are between + 0 and 360. This file will also show the keyboard wake lid + angle by querying the hardware. + +What: /sys/class/chromeos/<ec-device-name>/reboot +Date: August 2015 +KernelVersion: 4.2 +Description: + Tell the EC to reboot in various ways. Options are: + "cancel": Cancel a pending reboot. + "ro": Jump to RO without rebooting. + "rw": Jump to RW without rebooting. + "cold": Cold reboot. + "disable-jump": Disable jump until next reboot. + "hibernate": Hibernate the EC. + "at-shutdown": Reboot after an AP shutdown. + +What: /sys/class/chromeos/<ec-device-name>/version +Date: August 2015 +KernelVersion: 4.2 +Description: + Show the information about the EC software and hardware. diff --git a/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar b/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar new file mode 100644 index 000000000000..57a037791403 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar @@ -0,0 +1,74 @@ +What: /sys/class/chromeos/<ec-device-name>/lightbar/brightness +Date: August 2015 +KernelVersion: 4.2 +Description: + Writing to this file adjusts the overall brightness of + the lightbar, separate from any color intensity. The + valid range is 0 (off) to 255 (maximum brightness). + +What: /sys/class/chromeos/<ec-device-name>/lightbar/interval_msec +Date: August 2015 +KernelVersion: 4.2 +Description: + The lightbar is controlled by an embedded controller (EC), + which also manages the keyboard, battery charging, fans, + and other system hardware. To prevent unprivileged users + from interfering with the other EC functions, the rate at + which the lightbar control files can be read or written is + limited. + + Reading this file will return the number of milliseconds + that must elapse between accessing any of the lightbar + functions through this interface. Going faster will simply + block until the necessary interval has lapsed. The interval + applies uniformly to all accesses of any kind by any user. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/led_rgb +Date: August 2015 +KernelVersion: 4.2 +Description: + This allows you to control each LED segment. If the + lightbar is already running one of the automatic + sequences, you probably won’t see anything change because + your color setting will be almost immediately replaced. + To get useful results, you should stop the lightbar + sequence first. + + The values written to this file are sets of four integers, + indicating LED, RED, GREEN, BLUE. The LED number is 0 to 3 + to select a single segment, or 4 to set all four segments + to the same value at once. The RED, GREEN, and BLUE + numbers should be in the range 0 (off) to 255 (maximum). + You can update more than one segment at a time by writing + more than one set of four integers. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/program +Date: August 2015 +KernelVersion: 4.2 +Description: + This allows you to upload and run custom lightbar sequences. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/sequence +Date: August 2015 +KernelVersion: 4.2 +Description: + The Pixel lightbar has a number of built-in sequences + that it displays under various conditions, such as at + power on, shut down, or while running. Reading from this + file displays the current sequence that the lightbar is + displaying. Writing to this file allows you to change the + sequence. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/userspace_control +Date: August 2015 +KernelVersion: 4.2 +Description: + This allows you to take the control of the lightbar. This + prevents the kernel from going through its normal + sequences. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/version +Date: August 2015 +KernelVersion: 4.2 +Description: + Show the information about the lightbar version. diff --git a/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-vbc b/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-vbc new file mode 100644 index 000000000000..38c5aaaaa89a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-vbc @@ -0,0 +1,6 @@ +What: /sys/class/chromeos/<ec-device-name>/vbc/vboot_context +Date: October 2015 +KernelVersion: 4.4 +Description: + Read/write the verified boot context data included on a + small nvram space on some EC implementations. diff --git a/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt new file mode 100644 index 000000000000..480e66422625 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt @@ -0,0 +1,21 @@ +STMPE ADC driver +---------------- + +Required properties: + - compatible: "st,stmpe-adc" + +Optional properties: +Note that the ADC is shared with the STMPE touchscreen. ADC related settings +have to be done in the mfd. +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be + requestable due to different usage (e.g. touch) + +Node name must be stmpe_adc and should be child node of stmpe node to +which it belongs. + +Example: + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ + }; diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt new file mode 100644 index 000000000000..4494613ae7ad --- /dev/null +++ b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt @@ -0,0 +1,28 @@ +STMicroelectronics STPMIC1 Onkey + +Required properties: + +- compatible = "st,stpmic1-onkey"; +- interrupts: interrupt line to use +- interrupt-names = "onkey-falling", "onkey-rising" + onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic + onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic + +Optional properties: + +- st,onkey-clear-cc-flag: onkey is able power on after an + over-current shutdown event. +- st,onkey-pu-inactive: onkey pull up is not active +- power-off-time-sec: Duration in seconds which the key should be kept + pressed for device to power off automatically (from 1 to 16 seconds). + see See Documentation/devicetree/bindings/input/keys.txt + +Example: + +onkey { + compatible = "st,stpmic1-onkey"; + interrupt-parent = <&pmic>; + interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt index 127baa31a77a..c549924603d2 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt @@ -5,39 +5,105 @@ Required properties: - compatible: "st,stmpe-ts" Optional properties: -- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 -> - 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6 - -> 144 clocks), recommended is 4. -- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) -- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external - reference) -- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) -- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 - samples, 3 -> 8 samples) -- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 -> - 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended - is 3 -- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 - -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2 -- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of - the fractional part) recommended is 7 -- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35 - mA max, 1 -> 50 mA typical 80 mA max) +- st,ave-ctrl : Sample average control + 0 -> 1 sample + 1 -> 2 samples + 2 -> 4 samples + 3 -> 8 samples +- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) + 0 -> 10 us + 1 -> 50 us + 2 -> 100 us + 3 -> 500 us + 4 -> 1 ms + 5 -> 5 ms + 6 -> 10 ms + 7 -> 50 ms +- st,settling : Panel driver settling time (recommended is 2) + 0 -> 10 us + 1 -> 100 us + 2 -> 500 us + 3 -> 1 ms + 4 -> 5 ms + 5 -> 10 ms + 6 -> 50 ms + 7 -> 100 ms +- st,fraction-z : Length of the fractional part in z (recommended is 7) + (fraction-z ([0..7]) = Count of the fractional part) +- st,i-drive : current limit value of the touchscreen drivers + 0 -> 20 mA (typical 35mA max) + 1 -> 50 mA (typical 80 mA max) + +Optional properties common with MFD (deprecated): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks + 1 -> 44 clocks + 2 -> 56 clocks + 3 -> 64 clocks + 4 -> 80 clocks (recommended) + 5 -> 96 clocks + 6 -> 124 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC + 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal + 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz + 1 -> 3.25 MHz + 2 || 3 -> 6.5 MHz Node name must be stmpe_touchscreen and should be child node of stmpe node to which it belongs. +Note that common ADC settings of stmpe_touchscreen (child) will take precedence +over the settings done in MFD. + Example: +stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio4>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + /* Common ADC settings */ + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + stmpe_touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <1>; - st,touch-det-delay = <2>; - st,settling = <2>; + reg = <0>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 7 length fractional part in z */ st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ st,i-drive = <1>; }; + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt index 34dd89087cff..86446074e206 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt @@ -135,6 +135,8 @@ Required properties: - clocks: contains a phandle to the syscon node describing the clocks. There should then be one cell representing the clock to use +Optional properties: + - memory-region: A phandle to a reserved_memory region to be used for the LPC to AHB mapping diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt new file mode 100644 index 000000000000..004b0158cf4d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt @@ -0,0 +1,68 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +Also see these documents for generic binding information: + [1] GPIO : ../gpio/gpio.txt + +And these for relevant defines: + [2] include/dt-bindings/pinctrl/lochnagar.h + [3] include/dt-bindings/clock/lochnagar.h + +And these documents for the required sub-node binding details: + [4] Clock: ../clock/cirrus,lochnagar.txt + [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt + [6] Regulator: ../regulator/cirrus,lochnagar.txt + +Required properties: + + - compatible : One of the following strings: + "cirrus,lochnagar1" + "cirrus,lochnagar2" + + - reg : I2C slave address + + - reset-gpios : Reset line to the Lochnagar, see [1]. + +Required sub-nodes: + + - lochnagar-clk : Binding for the clocking components, see [4]. + + - lochnagar-pinctrl : Binding for the pin control components, see [5]. + +Optional sub-nodes: + + - Bindings for the regulator components, see [6]. Only available on + Lochnagar 2. + +Optional properties: + + - present-gpios : Host present line, indicating the presence of a + host system, see [1]. This can be omitted if the present line is + tied in hardware. + +Example: + +lochnagar: lochnagar@22 { + compatible = "cirrus,lochnagar2"; + reg = <0x22>; + + reset-gpios = <&gpio0 55 0>; + present-gpios = <&gpio0 60 0>; + + lochnagar-clk { + compatible = "cirrus,lochnagar2-clk"; + ... + }; + + lochnagar-pinctrl { + compatible = "cirrus,lochnagar-pinctrl"; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt new file mode 100644 index 000000000000..afd45c089585 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt @@ -0,0 +1,61 @@ +* STMicroelectronics STPMIC1 Power Management IC + +Required properties: +- compatible: : "st,stpmic1" +- reg: : The I2C slave address for the STPMIC1 chip. +- interrupts: : The interrupt line the device is connected to. +- #interrupt-cells: : Should be 1. +- interrupt-controller: : Marks the device node as an interrupt controller. + Interrupt numbers are defined at + dt-bindings/mfd/st,stpmic1.h. + +STPMIC1 consists in a varied group of sub-devices. +Each sub-device binding is be described in own documentation file. + +Device Description +------ ------------ +st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt +st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt +st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt + +Example: + +#include <dt-bindings/mfd/st,stpmic1.h> + +pmic: pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-parent = <&gpioa>; + interrupts = <0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + + regulators { + compatible = "st,stpmic1-regulators"; + + vdd_core: buck1 { + regulator-name = "vdd_core"; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt index c797c05cd3c2..d4408a417193 100644 --- a/Documentation/devicetree/bindings/mfd/stmpe.txt +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt @@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio, keypad, touchscreen, adc, pwm, rotator. Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device + - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" + - reg : I2C/SPI address of the device Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ + - interrupts : The interrupt outputs from the controller + - interrupt-controller : Marks the device node as an interrupt controller + - wakeup-source : Marks the input device as wakable + - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 + - irq-gpio : If present, which GPIO to use for event IRQ + +Optional properties for devices with touch and ADC (STMPE811|STMPE610): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz Example: diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt new file mode 100644 index 000000000000..7cc1407f15cb --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt @@ -0,0 +1,11 @@ +STMicroelectronics STPMIC1 Watchdog + +Required properties: + +- compatible : should be "st,stpmic1-wdt" + +Example: + +watchdog { + compatible = "st,stpmic1-wdt"; +}; |