diff options
Diffstat (limited to 'Documentation/devicetree/bindings/power/supply')
6 files changed, 286 insertions, 34 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml index 2627cd3eed83..377cbb2c2c1f 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml @@ -55,6 +55,14 @@ properties: interrupts: maxItems: 1 + io-channels: + items: + - description: battery temperature + + io-channel-names: + items: + - const: temp + wakeup-source: type: boolean description: | @@ -95,3 +103,26 @@ examples: wakeup-source; }; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fuel-gauge@36 { + compatible = "maxim,max17043"; + reg = <0x36>; + + interrupt-parent = <&gpio>; + interrupts = <144 IRQ_TYPE_EDGE_FALLING>; + + monitored-battery = <&battery>; + power-supplies = <&charger>; + + io-channels = <&adc 8>; + io-channel-names = "temp"; + + maxim,alert-low-soc-level = <10>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/mitsumi,mm8013.yaml b/Documentation/devicetree/bindings/power/supply/mitsumi,mm8013.yaml new file mode 100644 index 000000000000..6865640cbdfa --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/mitsumi,mm8013.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/mitsumi,mm8013.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mitsumi MM8013 fuel gauge + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: mitsumi,mm8013 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fuel-gauge@55 { + compatible = "mitsumi,mm8013"; + reg = <0x55>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8916-bms-vm.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8916-bms-vm.yaml new file mode 100644 index 000000000000..ad764e69ab57 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8916-bms-vm.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pm8916-bms-vm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Voltage Mode BMS + +maintainers: + - Nikita Travkin <nikita@trvn.ru> + +description: + Voltage Mode BMS is a hardware block found in some Qualcomm PMICs + such as pm8916. This block performs battery voltage monitoring. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: qcom,pm8916-bms-vm + + reg: + maxItems: 1 + + interrupts: + items: + - description: BMS FSM left S3 mode + - description: BMS FSM entered S2 mode + - description: OCV measured in S3 mode + - description: OCV below threshold + - description: FIFO update done + - description: BMS FSM switched state + + interrupt-names: + items: + - const: cv_leave + - const: cv_enter + - const: ocv_good + - const: ocv_thr + - const: fifo + - const: state_chg + + monitored-battery: true + + power-supplies: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - monitored-battery + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + battery@4000 { + compatible = "qcom,pm8916-bms-vm"; + reg = <0x4000>; + interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cv_leave", + "cv_enter", + "ocv_good", + "ocv_thr", + "fifo", + "state_chg"; + + monitored-battery = <&battery>; + power-supplies = <&pm8916_charger>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8916-lbc.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8916-lbc.yaml new file mode 100644 index 000000000000..cdf14e5ed119 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8916-lbc.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pm8916-lbc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Linear Battery Charger + +maintainers: + - Nikita Travkin <nikita@trvn.ru> + +description: + Linear Battery Charger hardware block, found in some Qualcomm PMICs + such as pm8916. Implements a simple, autonomous CC/CV charger. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: qcom,pm8916-lbc + + reg: + items: + - description: Charger + - description: Battery + - description: USB + - description: MISC + + reg-names: + items: + - const: chgr + - const: bat_if + - const: usb + - const: misc + + interrupts: + items: + - description: Battery detection + - description: Fast charging + - description: Charging failed + - description: Charging done + - description: Battery present + - description: Battery temperature OK + - description: USB coarse detection + - description: USB IN valid + - description: Charger gone + - description: Overtemperature + + interrupt-names: + items: + - const: vbat_det + - const: fast_chg + - const: chg_fail + - const: chg_done + - const: bat_pres + - const: temp_ok + - const: coarse_det + - const: usb_vbus + - const: chg_gone + - const: overtemp + + qcom,fast-charge-safe-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 4000000 + maximum: 4775000 + description: + Maximum safe battery voltage in uV; May be pre-set by bootloader, + in which case, setting this will harmlessly fail. + + qcom,fast-charge-safe-current: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 90000 + maximum: 1440000 + description: + Maximum safe battery charge current in uA; May be pre-set by + bootloader, in which case setting this will harmlessly fail. + + monitored-battery: true + +required: + - compatible + - reg + - interrupts + - interrupt-names + - qcom,fast-charge-safe-voltage + - qcom,fast-charge-safe-current + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + charger@1000 { + compatible = "qcom,pm8916-lbc"; + reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>; + reg-names = "chgr", "bat_if", "usb", "misc"; + + interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "vbat_det", + "fast_chg", + "chg_fail", + "chg_done", + "bat_pres", + "temp_ok", + "coarse_det", + "usb_vbus", + "chg_gone", + "overtemp"; + monitored-battery = <&battery>; + + qcom,fast-charge-safe-current = <900000>; + qcom,fast-charge-safe-voltage = <4300000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml index f255f3858d08..2e21846463ba 100644 --- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml @@ -47,6 +47,12 @@ patternProperties: "^i2c@[1-4]$": type: object $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 1 + maximum: 4 examples: - | diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt deleted file mode 100644 index ee125cb0e46d..000000000000 --- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt +++ /dev/null @@ -1,34 +0,0 @@ -AB85000 PMIC contains a node, which contains shared -information about the battery connected to the PMIC. -The node has no compatible property. - -Properties of this node are: - -thermistor-on-batctrl: - A boolean value indicating thermistor interface to battery - - Note: - 'btemp' and 'batctrl' are the pins interfaced for battery temperature - measurement, 'btemp' signal is used when NTC(negative temperature - coefficient) resister is interfaced external to battery whereas - 'batctrl' pin is used when NTC resister is internal to battery. - - Example: - ab8500_battery: ab8500_battery { - thermistor-on-batctrl; - }; - indicates: NTC resister is internal to battery, 'batctrl' is used - for thermal measurement. - - The absence of property 'thermal-on-batctrl' indicates - NTC resister is external to battery and 'btemp' signal is used - for thermal measurement. - -battery-type: - This shall be the battery manufacturing technology type, - allowed types are: - "UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn" - Example: - ab8500_battery: ab8500_battery { - stericsson,battery-type = "LIPO"; - } |