diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml new file mode 100644 index 000000000000..cf711082ad7d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7476.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AD7476 and similar simple SPI ADCs from multiple manufacturers. + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + A lot of simple SPI ADCs have very straight forward interfaces. + They typically don't provide a MOSI pin, simply reading out data + on MISO when the clock toggles. + +properties: + compatible: + enum: + - adi,ad7091 + - adi,ad7091r + - adi,ad7273 + - adi,ad7274 + - adi,ad7276 + - adi,ad7277 + - adi,ad7278 + - adi,ad7466 + - adi,ad7467 + - adi,ad7468 + - adi,ad7475 + - adi,ad7476 + - adi,ad7476a + - adi,ad7477 + - adi,ad7477a + - adi,ad7478 + - adi,ad7478a + - adi,ad7495 + - adi,ad7910 + - adi,ad7920 + - adi,ad7940 + - ti,adc081s + - ti,adc101s + - ti,adc121s + - ti,ads7866 + - ti,ads7867 + - ti,ads7868 + - lltc,ltc2314-14 + + reg: + maxItems: 1 + + vcc-supply: + description: + Main powersupply voltage for the chips, sometimes referred to as VDD on + datasheets. If there is no separate vref-supply, then this is needed + to establish channel scaling. + + vdrive-supply: + description: + Some devices have separate supply for their digital control side. + + vref-supply: + description: + Some devices have a specific reference voltage supplied on a different pin + to the other supplies. Needed to be able to establish channel scaling + unless there is also an internal reference available (e.g. ad7091r) + + spi-max-frequency: true + + adi,conversion-start-gpios: + description: A GPIO used to trigger the start of a conversion + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + # Devices where reference is vcc + - if: + properties: + compatible: + contains: + enum: + - adi,ad7091 + - adi,ad7276 + - adi,ad7277 + - adi,ad7278 + - adi,ad7466 + - adi,ad7467 + - adi,ad7468 + - adi,ad7940 + - ti,adc081s + - ti,adc101s + - ti,adc121s + - ti,ads7866 + - ti,ads7868 + required: + - vcc-supply + # Devices with a vref + - if: + properties: + compatible: + contains: + enum: + - adi,ad7091r + - adi,ad7273 + - adi,ad7274 + - adi,ad7475 + - lltc,ltc2314-14 + then: + properties: + vref-supply: true + else: + properties: + vref-supply: false + # Devices with a vref where it is not optional + - if: + properties: + compatible: + contains: + enum: + - adi,ad7273 + - adi,ad7274 + - adi,ad7475 + - lltc,ltc2314-14 + then: + required: + - vref-supply + - if: + properties: + compatible: + contains: + enum: + - adi,ad7475 + - adi,ad7495 + then: + properties: + vdrive-supply: true + else: + properties: + vdrive-supply: false + - if: + properties: + compatible: + contains: + enum: + - adi,ad7091 + - adi,ad7091r + then: + properties: + adi,conversion-start-gpios: true + else: + properties: + adi,conversion-start-gpios: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7091r"; + reg = <0>; + spi-max-frequency = <5000000>; + vcc-supply = <&adc_vcc>; + vref-supply = <&adc_vref>; + }; + }; +... |