diff options
-rw-r--r-- | drivers/pci/ats.c | 3 | ||||
-rw-r--r-- | drivers/pci/controller/dwc/pcie-designware-ep.c | 2 | ||||
-rw-r--r-- | drivers/pci/controller/pcie-rockchip-ep.c | 1 | ||||
-rw-r--r-- | drivers/pci/endpoint/functions/pci-epf-test.c | 2 | ||||
-rw-r--r-- | drivers/pci/endpoint/pci-ep-cfs.c | 2 | ||||
-rw-r--r-- | drivers/pci/endpoint/pci-epc-core.c | 2 | ||||
-rw-r--r-- | drivers/pci/endpoint/pci-epc-mem.c | 2 | ||||
-rw-r--r-- | drivers/pci/endpoint/pci-epf-core.c | 4 | ||||
-rw-r--r-- | drivers/pci/hotplug/acpi_pcihp.c | 4 | ||||
-rw-r--r-- | drivers/pci/hotplug/pciehp_core.c | 1 | ||||
-rw-r--r-- | drivers/pci/of.c | 2 | ||||
-rw-r--r-- | drivers/pci/pci-pf-stub.c | 2 | ||||
-rw-r--r-- | drivers/pci/setup-bus.c | 1 | ||||
-rw-r--r-- | drivers/pci/vc.c | 1 |
14 files changed, 18 insertions, 11 deletions
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c index b761c1f72f67..2e1073052509 100644 --- a/drivers/pci/ats.c +++ b/drivers/pci/ats.c @@ -188,7 +188,8 @@ void pci_pri_init(struct pci_dev *pdev) /** * pci_enable_pri - Enable PRI capability - * @ pdev: PCI device structure + * @pdev: PCI device structure + * @reqs: outstanding requests * * Returns 0 on success, negative value on error */ diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index 5e5b8821bed8..305bfec2424d 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * Synopsys DesignWare PCIe Endpoint controller driver * * Copyright (C) 2017 Texas Instruments diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c index 5eaf36629a75..7631dc3961c1 100644 --- a/drivers/pci/controller/pcie-rockchip-ep.c +++ b/drivers/pci/controller/pcie-rockchip-ep.c @@ -22,6 +22,7 @@ /** * struct rockchip_pcie_ep - private data for PCIe endpoint controller driver * @rockchip: Rockchip PCIe controller + * @epc: PCI EPC device * @max_regions: maximum number of regions supported by hardware * @ob_region_map: bitmask of mapped outbound regions * @ob_addr: base addresses in the AXI bus where the outbound regions start diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c index c89a9561439f..e4e51d884553 100644 --- a/drivers/pci/endpoint/functions/pci-epf-test.c +++ b/drivers/pci/endpoint/functions/pci-epf-test.c @@ -181,7 +181,7 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test) /** * pci_epf_test_clean_dma_chan() - Function to cleanup EPF test DMA channel - * @epf: the EPF test device that performs data transfer operation + * @epf_test: the EPF test device that performs data transfer operation * * Helper to cleanup EPF test DMA channel. */ diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c index 55edce50be96..3710adf51912 100644 --- a/drivers/pci/endpoint/pci-ep-cfs.c +++ b/drivers/pci/endpoint/pci-ep-cfs.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * configfs to configure the PCI endpoint * * Copyright (C) 2017 Texas Instruments diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c index 82ba0dc7f2f5..cadd3db0cbb0 100644 --- a/drivers/pci/endpoint/pci-epc-core.c +++ b/drivers/pci/endpoint/pci-epc-core.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * PCI Endpoint *Controller* (EPC) library * * Copyright (C) 2017 Texas Instruments diff --git a/drivers/pci/endpoint/pci-epc-mem.c b/drivers/pci/endpoint/pci-epc-mem.c index 80c46f3a4590..a97b56a6d2db 100644 --- a/drivers/pci/endpoint/pci-epc-mem.c +++ b/drivers/pci/endpoint/pci-epc-mem.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * PCI Endpoint *Controller* Address Space Management * * Copyright (C) 2017 Texas Instruments diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c index 244e00f48c5c..c977cf9dce56 100644 --- a/drivers/pci/endpoint/pci-epf-core.c +++ b/drivers/pci/endpoint/pci-epf-core.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * PCI Endpoint *Function* (EPF) library * * Copyright (C) 2017 Texas Instruments @@ -71,6 +71,7 @@ EXPORT_SYMBOL_GPL(pci_epf_bind); /** * pci_epf_free_space() - free the allocated PCI EPF register space + * @epf: the EPF device from whom to free the memory * @addr: the virtual address of the PCI EPF register space * @bar: the BAR number corresponding to the register space * @@ -96,6 +97,7 @@ EXPORT_SYMBOL_GPL(pci_epf_free_space); /** * pci_epf_alloc_space() - allocate memory for the PCI EPF register space + * @epf: the EPF device to whom allocate the memory * @size: the size of the memory that has to be allocated * @bar: the BAR number corresponding to the allocated register space * @align: alignment size for the allocation region diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index 6b7c1ed58e7e..2750a64cecd3 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -61,7 +61,7 @@ static acpi_status acpi_run_oshp(acpi_handle handle) /** * acpi_get_hp_hw_control_from_firmware - * @dev: the pci_dev of the bridge that has a hotplug controller + * @pdev: the pci_dev of the bridge that has a hotplug controller * * Attempt to take hotplug control from firmware. */ @@ -191,7 +191,7 @@ check_hotplug(acpi_handle handle, u32 lvl, void *context, void **rv) /** * acpi_pci_detect_ejectable - check if the PCI bus has ejectable slots - * @handle - handle of the PCI bus to scan + * @handle: handle of the PCI bus to scan * * Returns 1 if the PCI bus has ACPI based ejectable slots, 0 otherwise. */ diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index bf779f291f15..ad3393930ecb 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -153,6 +153,7 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) /** * pciehp_check_presence() - synthesize event if presence has changed + * @ctrl: controller to check * * On probe and resume, an explicit presence check is necessary to bring up an * occupied slot or bring down an unoccupied slot. This can't be triggered by diff --git a/drivers/pci/of.c b/drivers/pci/of.c index 27839cd2459f..4c3bd8696aaf 100644 --- a/drivers/pci/of.c +++ b/drivers/pci/of.c @@ -243,6 +243,8 @@ EXPORT_SYMBOL_GPL(of_pci_check_probe_only); * @busno: bus number associated with the bridge root bus * @bus_max: maximum number of buses for this bridge * @resources: list where the range of resources will be added after DT parsing + * @ib_resources: list where the range of inbound resources (with addresses + * from 'dma-ranges') will be added after DT parsing * @io_base: pointer to a variable that will contain on return the physical * address for the start of the I/O range. Can be NULL if the caller doesn't * expect I/O ranges to be present in the device tree. diff --git a/drivers/pci/pci-pf-stub.c b/drivers/pci/pci-pf-stub.c index ef293e735c55..a0b2bd6c918a 100644 --- a/drivers/pci/pci-pf-stub.c +++ b/drivers/pci/pci-pf-stub.c @@ -9,7 +9,7 @@ #include <linux/module.h> #include <linux/pci.h> -/** +/* * pci_pf_stub_whitelist - White list of devices to bind pci-pf-stub onto * * This table provides the list of IDs this driver is supposed to bind diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 9b94b1f16d80..fb74d8eb8088 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -55,6 +55,7 @@ static void free_list(struct list_head *head) * @dev: Device to which the resource belongs * @res: Resource to be tracked * @add_size: Additional size to be optionally added to the resource + * @min_align: Minimum memory window alignment */ static int add_to_list(struct list_head *head, struct pci_dev *dev, struct resource *res, resource_size_t add_size, diff --git a/drivers/pci/vc.c b/drivers/pci/vc.c index 5486f8768c86..5fc59ac31145 100644 --- a/drivers/pci/vc.c +++ b/drivers/pci/vc.c @@ -172,7 +172,6 @@ enable: * @dev: device * @pos: starting position of VC capability (VC/VC9/MFVC) * @save_state: buffer for save/restore - * @name: for error message * @save: if provided a buffer, this indicates what to do with it * * Walking Virtual Channel config space to size, save, or restore it |