Merge branch 'depends/rmk/gpio' into next/fixes

This sorts out merge conflicts with the arm/gpio branch that
already got merged into mainline Linux.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

37 files changed, 2612 insertions, 520 deletions

diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 960c72571395..3f4c2613b3df 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -30,7 +30,7 @@
 
 #include <mach/at91sam9_smc.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #define DRV_NAME		"pata_at91"
 #define DRV_VERSION		"0.3"
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d539efd96d4b..4caa3d37bbde 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -178,6 +178,15 @@ config GPIO_SCH
 	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
 	  core power rail and 9 from suspend power supply.
 
+config GPIO_U300
+	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+	depends on GPIOLIB && ARCH_U300
+	help
+	  Say yes here to support GPIO interface on ST-Ericsson U300.
+	  The names of the two IP block variants supported are
+	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+	  ports of 8 GPIO pins each.
+
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
 	depends on MFD_SUPPORT && PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9588948c96f0..19c5d27b6d2e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,11 +14,14 @@ obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
+obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
 obj-$(CONFIG_GPIO_EXYNOS4)	+= gpio-exynos4.o
 obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
+obj-$(CONFIG_MACH_KS8695)	+= gpio-ks8695.o
 obj-$(CONFIG_GPIO_LANGWELL)	+= gpio-langwell.o
+obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
 obj-$(CONFIG_GPIO_MAX730X)	+= gpio-max730x.o
 obj-$(CONFIG_GPIO_MAX7300)	+= gpio-max7300.o
 obj-$(CONFIG_GPIO_MAX7301)	+= gpio-max7301.o
@@ -37,18 +40,20 @@ obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
+obj-$(CONFIG_PLAT_PXA)		+= gpio-pxa.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
 
 obj-$(CONFIG_GPIO_PLAT_SAMSUNG)	+= gpio-plat-samsung.o
 obj-$(CONFIG_GPIO_S5PC100)	+= gpio-s5pc100.o
 obj-$(CONFIG_GPIO_S5PV210)	+= gpio-s5pv210.o
-
+obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o
 obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
 obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
 obj-$(CONFIG_GPIO_SX150X)	+= gpio-sx150x.o
 obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
 obj-$(CONFIG_GPIO_TWL4030)	+= gpio-twl4030.o
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
new file mode 100644
index 000000000000..df0d59570a84
--- /dev/null
+++ b/drivers/gpio/gpio-davinci.c
@@ -0,0 +1,455 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006-2007 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+struct davinci_gpio_regs {
+	u32	dir;
+	u32	out_data;
+	u32	set_data;
+	u32	clr_data;
+	u32	in_data;
+	u32	set_rising;
+	u32	clr_rising;
+	u32	set_falling;
+	u32	clr_falling;
+	u32	intstat;
+};
+
+#define chip2controller(chip)	\
+	container_of(chip, struct davinci_gpio_controller, chip)
+
+static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static void __iomem *gpio_base;
+
+static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
+{
+	void __iomem *ptr;
+
+	if (gpio < 32 * 1)
+		ptr = gpio_base + 0x10;
+	else if (gpio < 32 * 2)
+		ptr = gpio_base + 0x38;
+	else if (gpio < 32 * 3)
+		ptr = gpio_base + 0x60;
+	else if (gpio < 32 * 4)
+		ptr = gpio_base + 0x88;
+	else if (gpio < 32 * 5)
+		ptr = gpio_base + 0xb0;
+	else
+		ptr = NULL;
+	return ptr;
+}
+
+static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
+{
+	struct davinci_gpio_regs __iomem *g;
+
+	g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
+
+	return g;
+}
+
+static int __init davinci_gpio_irq_setup(void);
+
+/*--------------------------------------------------------------------------*/
+
+/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
+static inline int __davinci_direction(struct gpio_chip *chip,
+			unsigned offset, bool out, int value)
+{
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
+	unsigned long flags;
+	u32 temp;
+	u32 mask = 1 << offset;
+
+	spin_lock_irqsave(&d->lock, flags);
+	temp = __raw_readl(&g->dir);
+	if (out) {
+		temp &= ~mask;
+		__raw_writel(mask, value ? &g->set_data : &g->clr_data);
+	} else {
+		temp |= mask;
+	}
+	__raw_writel(temp, &g->dir);
+	spin_unlock_irqrestore(&d->lock, flags);
+
+	return 0;
+}
+
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	return __davinci_direction(chip, offset, false, 0);
+}
+
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+	return __davinci_direction(chip, offset, true, value);
+}
+
+/*
+ * Read the pin's value (works even if it's set up as output);
+ * returns zero/nonzero.
+ *
+ * Note that changes are synched to the GPIO clock, so reading values back
+ * right after you've set them may give old values.
+ */
+static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
+
+	return (1 << offset) & __raw_readl(&g->in_data);
+}
+
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+static void
+davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
+
+	__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
+}
+
+static int __init davinci_gpio_setup(void)
+{
+	int i, base;
+	unsigned ngpio;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_gpio_regs *regs;
+
+	if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
+		return 0;
+
+	/*
+	 * The gpio banks conceptually expose a segmented bitmap,
+	 * and "ngpio" is one more than the largest zero-based
+	 * bit index that's valid.
+	 */
+	ngpio = soc_info->gpio_num;
+	if (ngpio == 0) {
+		pr_err("GPIO setup:  how many GPIOs?\n");
+		return -EINVAL;
+	}
+
+	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+		ngpio = DAVINCI_N_GPIO;
+
+	gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
+	if (WARN_ON(!gpio_base))
+		return -ENOMEM;
+
+	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
+		chips[i].chip.label = "DaVinci";
+
+		chips[i].chip.direction_input = davinci_direction_in;
+		chips[i].chip.get = davinci_gpio_get;
+		chips[i].chip.direction_output = davinci_direction_out;
+		chips[i].chip.set = davinci_gpio_set;
+
+		chips[i].chip.base = base;
+		chips[i].chip.ngpio = ngpio - base;
+		if (chips[i].chip.ngpio > 32)
+			chips[i].chip.ngpio = 32;
+
+		spin_lock_init(&chips[i].lock);
+
+		regs = gpio2regs(base);
+		chips[i].regs = regs;
+		chips[i].set_data = &regs->set_data;
+		chips[i].clr_data = &regs->clr_data;
+		chips[i].in_data = &regs->in_data;
+
+		gpiochip_add(&chips[i].chip);
+	}
+
+	soc_info->gpio_ctlrs = chips;
+	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+
+	davinci_gpio_irq_setup();
+	return 0;
+}
+pure_initcall(davinci_gpio_setup);
+
+/*--------------------------------------------------------------------------*/
+/*
+ * We expect irqs will normally be set up as input pins, but they can also be
+ * used as output pins ... which is convenient for testing.
+ *
+ * NOTE:  The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead.
+ *
+ * All those INTC hookups (direct, plus several IRQ banks) can also
+ * serve as EDMA event triggers.
+ */
+
+static void gpio_irq_disable(struct irq_data *d)
+{
+	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+	u32 mask = (u32) irq_data_get_irq_handler_data(d);
+
+	__raw_writel(mask, &g->clr_falling);
+	__raw_writel(mask, &g->clr_rising);
+}
+
+static void gpio_irq_enable(struct irq_data *d)
+{
+	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+	u32 mask = (u32) irq_data_get_irq_handler_data(d);
+	unsigned status = irqd_get_trigger_type(d);
+
+	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+	if (!status)
+		status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+
+	if (status & IRQ_TYPE_EDGE_FALLING)
+		__raw_writel(mask, &g->set_falling);
+	if (status & IRQ_TYPE_EDGE_RISING)
+		__raw_writel(mask, &g->set_rising);
+}
+
+static int gpio_irq_type(struct irq_data *d, unsigned trigger)
+{
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct irq_chip gpio_irqchip = {
+	.name		= "GPIO",
+	.irq_enable	= gpio_irq_enable,
+	.irq_disable	= gpio_irq_disable,
+	.irq_set_type	= gpio_irq_type,
+	.flags		= IRQCHIP_SET_TYPE_MASKED,
+};
+
+static void
+gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct davinci_gpio_regs __iomem *g;
+	u32 mask = 0xffff;
+	struct davinci_gpio_controller *d;
+
+	d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
+	g = (struct davinci_gpio_regs __iomem *)d->regs;
+
+	/* we only care about one bank */
+	if (irq & 1)
+		mask <<= 16;
+
+	/* temporarily mask (level sensitive) parent IRQ */
+	desc->irq_data.chip->irq_mask(&desc->irq_data);
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+	while (1) {
+		u32		status;
+		int		n;
+		int		res;
+
+		/* ack any irqs */
+		status = __raw_readl(&g->intstat) & mask;
+		if (!status)
+			break;
+		__raw_writel(status, &g->intstat);
+
+		/* now demux them to the right lowlevel handler */
+		n = d->irq_base;
+		if (irq & 1) {
+			n += 16;
+			status >>= 16;
+		}
+
+		while (status) {
+			res = ffs(status);
+			n += res;
+			generic_handle_irq(n - 1);
+			status >>= res;
+		}
+	}
+	desc->irq_data.chip->irq_unmask(&desc->irq_data);
+	/* now it may re-trigger */
+}
+
+static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *d = chip2controller(chip);
+
+	if (d->irq_base >= 0)
+		return d->irq_base + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	/* NOTE:  we assume for now that only irqs in the first gpio_chip
+	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
+	 */
+	if (offset < soc_info->gpio_unbanked)
+		return soc_info->gpio_irq + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
+{
+	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+	u32 mask = (u32) irq_data_get_irq_handler_data(d);
+
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+		     ? &g->set_falling : &g->clr_falling);
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+		     ? &g->set_rising : &g->clr_rising);
+
+	return 0;
+}
+
+/*
+ * NOTE:  for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
+ * calls ... so if no gpios are wakeup events the clock can be disabled,
+ * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
+ * (dm6446) can be set appropriately for GPIOV33 pins.
+ */
+
+static int __init davinci_gpio_irq_setup(void)
+{
+	unsigned	gpio, irq, bank;
+	struct clk	*clk;
+	u32		binten = 0;
+	unsigned	ngpio, bank_irq;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_gpio_regs	__iomem *g;
+
+	ngpio = soc_info->gpio_num;
+
+	bank_irq = soc_info->gpio_irq;
+	if (bank_irq == 0) {
+		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+		return -EINVAL;
+	}
+
+	clk = clk_get(NULL, "gpio");
+	if (IS_ERR(clk)) {
+		printk(KERN_ERR "Error %ld getting gpio clock?\n",
+		       PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+	clk_enable(clk);
+
+	/* Arrange gpio_to_irq() support, handling either direct IRQs or
+	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
+	 * IRQs, while the others use banked IRQs, would need some setup
+	 * tweaks to recognize hardware which can do that.
+	 */
+	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
+		chips[bank].chip.to_irq = gpio_to_irq_banked;
+		chips[bank].irq_base = soc_info->gpio_unbanked
+			? -EINVAL
+			: (soc_info->intc_irq_num + gpio);
+	}
+
+	/*
+	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+	 * controller only handling trigger modes.  We currently assume no
+	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
+	 */
+	if (soc_info->gpio_unbanked) {
+		static struct irq_chip gpio_irqchip_unbanked;
+
+		/* pass "bank 0" GPIO IRQs to AINTC */
+		chips[0].chip.to_irq = gpio_to_irq_unbanked;
+		binten = BIT(0);
+
+		/* AINTC handles mask/unmask; GPIO handles triggering */
+		irq = bank_irq;
+		gpio_irqchip_unbanked = *irq_get_chip(irq);
+		gpio_irqchip_unbanked.name = "GPIO-AINTC";
+		gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
+
+		/* default trigger: both edges */
+		g = gpio2regs(0);
+		__raw_writel(~0, &g->set_falling);
+		__raw_writel(~0, &g->set_rising);
+
+		/* set the direct IRQs up to use that irqchip */
+		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+			irq_set_chip(irq, &gpio_irqchip_unbanked);
+			irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+			irq_set_chip_data(irq, (__force void *)g);
+			irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
+		}
+
+		goto done;
+	}
+
+	/*
+	 * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
+	 * then chain through our own handler.
+	 */
+	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+			gpio < ngpio;
+			bank++, bank_irq++) {
+		unsigned		i;
+
+		/* disabled by default, enabled only as needed */
+		g = gpio2regs(gpio);
+		__raw_writel(~0, &g->clr_falling);
+		__raw_writel(~0, &g->clr_rising);
+
+		/* set up all irqs in this bank */
+		irq_set_chained_handler(bank_irq, gpio_irq_handler);
+
+		/*
+		 * Each chip handles 32 gpios, and each irq bank consists of 16
+		 * gpio irqs. Pass the irq bank's corresponding controller to
+		 * the chained irq handler.
+		 */
+		irq_set_handler_data(bank_irq, &chips[gpio / 32]);
+
+		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
+			irq_set_chip(irq, &gpio_irqchip);
+			irq_set_chip_data(irq, (__force void *)g);
+			irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+			irq_set_handler(irq, handle_simple_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+
+		binten |= BIT(bank);
+	}
+
+done:
+	/* BINTEN -- per-bank interrupt enable. genirq would also let these
+	 * bits be set/cleared dynamically.
+	 */
+	__raw_writel(binten, gpio_base + 0x08);
+
+	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
+
+	return 0;
+}
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 72fb9c665320..7aafbb437339 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -23,6 +23,9 @@
 #include <linux/basic_mmio_gpio.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-ep93xx.h>
+
+#define irq_to_gpio(irq)	((irq) - gpio_to_irq(0))
 
 struct ep93xx_gpio {
 	void __iomem		*mmio_base;
@@ -307,6 +310,21 @@ static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
 	return 0;
 }
 
+/*
+ * Map GPIO A0..A7  (0..7)  to irq 64..71,
+ *          B0..B7  (7..15) to irq 72..79, and
+ *          F0..F7 (16..24) to irq 80..87.
+ */
+static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	int gpio = chip->base + offset;
+
+	if (gpio > EP93XX_GPIO_LINE_MAX_IRQ)
+		return -EINVAL;
+
+	return 64 + gpio;
+}
+
 static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
 	void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
 {
@@ -321,8 +339,10 @@ static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
 	bgc->gc.label = bank->label;
 	bgc->gc.base = bank->base;
 
-	if (bank->has_debounce)
+	if (bank->has_debounce) {
 		bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
+		bgc->gc.to_irq = ep93xx_gpio_to_irq;
+	}
 
 	return gpiochip_add(&bgc->gc);
 }
diff --git a/drivers/gpio/gpio-ks8695.c b/drivers/gpio/gpio-ks8695.c
new file mode 100644
index 000000000000..a3ac66ea364b
--- /dev/null
+++ b/drivers/gpio/gpio-ks8695.c
@@ -0,0 +1,319 @@
+/*
+ * arch/arm/mach-ks8695/gpio.c
+ *
+ * Copyright (C) 2006 Andrew Victor
+ * Updated to GPIOLIB, Copyright 2008 Simtec Electronics
+ *                     Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-ks8695.h>
+
+/*
+ * Configure a GPIO line for either GPIO function, or its internal
+ * function (Interrupt, Timer, etc).
+ */
+static void ks8695_gpio_mode(unsigned int pin, short gpio)
+{
+	unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_5)	/* only GPIO 0..5 have internal functions */
+		return;
+
+	local_irq_save(flags);
+
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+	if (gpio)			/* GPIO: set bit to 0 */
+		x &= ~enable[pin];
+	else				/* Internal function: set bit to 1 */
+		x |= enable[pin];
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC);
+
+	local_irq_restore(flags);
+}
+
+
+static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 };
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_3)	/* only GPIO 0..3 can generate IRQ */
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	/* set pin as input */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	x &= ~IOPM(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+	local_irq_restore(flags);
+
+	/* Set IRQ triggering type */
+	irq_set_irq_type(gpio_irq[pin], type);
+
+	/* enable interrupt mode */
+	ks8695_gpio_mode(pin, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(ks8695_gpio_interrupt);
+
+
+
+/* .... Generic GPIO interface .............................................. */
+
+/*
+ * Configure the GPIO line as an input.
+ */
+static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_15)
+		return -EINVAL;
+
+	/* set pin to GPIO mode */
+	ks8695_gpio_mode(pin, 1);
+
+	local_irq_save(flags);
+
+	/* set pin as input */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	x &= ~IOPM(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+static int ks8695_gpio_direction_output(struct gpio_chip *gc,
+					unsigned int pin, int state)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_15)
+		return -EINVAL;
+
+	/* set pin to GPIO mode */
+	ks8695_gpio_mode(pin, 1);
+
+	local_irq_save(flags);
+
+	/* set line state */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+	if (state)
+		x |= IOPD(pin);
+	else
+		x &= ~IOPD(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+	/* set pin as output */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	x |= IOPM(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+
+/*
+ * Set the state of an output GPIO line.
+ */
+static void ks8695_gpio_set_value(struct gpio_chip *gc,
+				  unsigned int pin, int state)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_15)
+		return;
+
+	local_irq_save(flags);
+
+	/* set output line state */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+	if (state)
+		x |= IOPD(pin);
+	else
+		x &= ~IOPD(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+	local_irq_restore(flags);
+}
+
+
+/*
+ * Read the state of a GPIO line.
+ */
+static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin)
+{
+	unsigned long x;
+
+	if (pin > KS8695_GPIO_15)
+		return -EINVAL;
+
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+	return (x & IOPD(pin)) != 0;
+}
+
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin)
+{
+	if (pin > KS8695_GPIO_3)	/* only GPIO 0..3 can generate IRQ */
+		return -EINVAL;
+
+	return gpio_irq[pin];
+}
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq)
+{
+	if ((irq < KS8695_IRQ_EXTERN0) || (irq > KS8695_IRQ_EXTERN3))
+		return -EINVAL;
+
+	return (irq - KS8695_IRQ_EXTERN0);
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
+/* GPIOLIB interface */
+
+static struct gpio_chip ks8695_gpio_chip = {
+	.label			= "KS8695",
+	.direction_input	= ks8695_gpio_direction_input,
+	.direction_output	= ks8695_gpio_direction_output,
+	.get			= ks8695_gpio_get_value,
+	.set			= ks8695_gpio_set_value,
+	.to_irq			= ks8695_gpio_to_irq,
+	.base			= 0,
+	.ngpio			= 16,
+	.can_sleep		= 0,
+};
+
+/* Register the GPIOs */
+void ks8695_register_gpios(void)
+{
+	if (gpiochip_add(&ks8695_gpio_chip))
+		printk(KERN_ERR "Unable to register core GPIOs\n");
+}
+
+/* .... Debug interface ..................................................... */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int ks8695_gpio_show(struct seq_file *s, void *unused)
+{
+	unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+	unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
+	unsigned long mode, ctrl, data;
+	int i;
+
+	mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+	data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+
+	seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
+
+	for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
+		seq_printf(s, "%i:\t", i);
+
+		seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
+
+		if (i <= KS8695_GPIO_3) {
+			if (ctrl & enable[i]) {
+				seq_printf(s, "EXT%i ", i);
+
+				switch ((ctrl & intmask[i]) >> (4 * i)) {
+					case IOPC_TM_LOW:
+						seq_printf(s, "(Low)");		break;
+					case IOPC_TM_HIGH:
+						seq_printf(s, "(High)");	break;
+					case IOPC_TM_RISING:
+						seq_printf(s, "(Rising)");	break;
+					case IOPC_TM_FALLING:
+						seq_printf(s, "(Falling)");	break;
+					case IOPC_TM_EDGE:
+						seq_printf(s, "(Edges)");	break;
+				}
+			}
+			else
+				seq_printf(s, "GPIO\t");
+		}
+		else if (i <= KS8695_GPIO_5) {
+			if (ctrl & enable[i])
+				seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
+			else
+				seq_printf(s, "GPIO\t");
+		}
+		else
+			seq_printf(s, "GPIO\t");
+
+		seq_printf(s, "\t");
+
+		seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
+	}
+	return 0;
+}
+
+static int ks8695_gpio_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ks8695_gpio_show, NULL);
+}
+
+static const struct file_operations ks8695_gpio_operations = {
+	.open		= ks8695_gpio_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init ks8695_gpio_debugfs_init(void)
+{
+	/* /sys/kernel/debug/ks8695_gpio */
+	(void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
+	return 0;
+}
+postcore_initcall(ks8695_gpio_debugfs_init);
+
+#endif
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
new file mode 100644
index 000000000000..5b6948081f8f
--- /dev/null
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -0,0 +1,446 @@
+/*
+ * arch/arm/mach-lpc32xx/gpiolib.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/gpio-lpc32xx.h>
+
+#define LPC32XX_GPIO_P3_INP_STATE		_GPREG(0x000)
+#define LPC32XX_GPIO_P3_OUTP_SET		_GPREG(0x004)
+#define LPC32XX_GPIO_P3_OUTP_CLR		_GPREG(0x008)
+#define LPC32XX_GPIO_P3_OUTP_STATE		_GPREG(0x00C)
+#define LPC32XX_GPIO_P2_DIR_SET			_GPREG(0x010)
+#define LPC32XX_GPIO_P2_DIR_CLR			_GPREG(0x014)
+#define LPC32XX_GPIO_P2_DIR_STATE		_GPREG(0x018)
+#define LPC32XX_GPIO_P2_INP_STATE		_GPREG(0x01C)
+#define LPC32XX_GPIO_P2_OUTP_SET		_GPREG(0x020)
+#define LPC32XX_GPIO_P2_OUTP_CLR		_GPREG(0x024)
+#define LPC32XX_GPIO_P2_MUX_SET			_GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR			_GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE		_GPREG(0x030)
+#define LPC32XX_GPIO_P0_INP_STATE		_GPREG(0x040)
+#define LPC32XX_GPIO_P0_OUTP_SET		_GPREG(0x044)
+#define LPC32XX_GPIO_P0_OUTP_CLR		_GPREG(0x048)
+#define LPC32XX_GPIO_P0_OUTP_STATE		_GPREG(0x04C)
+#define LPC32XX_GPIO_P0_DIR_SET			_GPREG(0x050)
+#define LPC32XX_GPIO_P0_DIR_CLR			_GPREG(0x054)
+#define LPC32XX_GPIO_P0_DIR_STATE		_GPREG(0x058)
+#define LPC32XX_GPIO_P1_INP_STATE		_GPREG(0x060)
+#define LPC32XX_GPIO_P1_OUTP_SET		_GPREG(0x064)
+#define LPC32XX_GPIO_P1_OUTP_CLR		_GPREG(0x068)
+#define LPC32XX_GPIO_P1_OUTP_STATE		_GPREG(0x06C)
+#define LPC32XX_GPIO_P1_DIR_SET			_GPREG(0x070)
+#define LPC32XX_GPIO_P1_DIR_CLR			_GPREG(0x074)
+#define LPC32XX_GPIO_P1_DIR_STATE		_GPREG(0x078)
+
+#define GPIO012_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO3_PIN_TO_BIT(x)			(1 << ((x) + 25))
+#define GPO3_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO012_PIN_IN_SEL(x, y)		(((x) >> (y)) & 1)
+#define GPIO3_PIN_IN_SHIFT(x)			((x) == 5 ? 24 : 10 + (x))
+#define GPIO3_PIN_IN_SEL(x, y)			((x) >> GPIO3_PIN_IN_SHIFT(y))
+#define GPIO3_PIN5_IN_SEL(x)			(((x) >> 24) & 1)
+#define GPI3_PIN_IN_SEL(x, y)			(((x) >> (y)) & 1)
+
+struct gpio_regs {
+	void __iomem *inp_state;
+	void __iomem *outp_set;
+	void __iomem *outp_clr;
+	void __iomem *dir_set;
+	void __iomem *dir_clr;
+};
+
+/*
+ * GPIO names
+ */
+static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = {
+	"p0.0", "p0.1", "p0.2", "p0.3",
+	"p0.4", "p0.5", "p0.6", "p0.7"
+};
+
+static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = {
+	"p1.0", "p1.1", "p1.2", "p1.3",
+	"p1.4", "p1.5", "p1.6", "p1.7",
+	"p1.8", "p1.9", "p1.10", "p1.11",
+	"p1.12", "p1.13", "p1.14", "p1.15",
+	"p1.16", "p1.17", "p1.18", "p1.19",
+	"p1.20", "p1.21", "p1.22", "p1.23",
+};
+
+static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = {
+	"p2.0", "p2.1", "p2.2", "p2.3",
+	"p2.4", "p2.5", "p2.6", "p2.7",
+	"p2.8", "p2.9", "p2.10", "p2.11",
+	"p2.12"
+};
+
+static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
+	"gpi000", "gpio01", "gpio02", "gpio03",
+	"gpio04", "gpio05"
+};
+
+static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = {
+	"gpi00", "gpi01", "gpi02", "gpi03",
+	"gpi04", "gpi05", "gpi06", "gpi07",
+	"gpi08", "gpi09",  NULL,    NULL,
+	 NULL,    NULL,    NULL,   "gpi15",
+	"gpi16", "gpi17", "gpi18", "gpi19",
+	"gpi20", "gpi21", "gpi22", "gpi23",
+	"gpi24", "gpi25", "gpi26", "gpi27"
+};
+
+static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = {
+	"gpo00", "gpo01", "gpo02", "gpo03",
+	"gpo04", "gpo05", "gpo06", "gpo07",
+	"gpo08", "gpo09", "gpo10", "gpo11",
+	"gpo12", "gpo13", "gpo14", "gpo15",
+	"gpo16", "gpo17", "gpo18", "gpo19",
+	"gpo20", "gpo21", "gpo22", "gpo23"
+};
+
+static struct gpio_regs gpio_grp_regs_p0 = {
+	.inp_state	= LPC32XX_GPIO_P0_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P0_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P0_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P0_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P0_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p1 = {
+	.inp_state	= LPC32XX_GPIO_P1_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P1_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P1_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P1_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P1_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p2 = {
+	.inp_state	= LPC32XX_GPIO_P2_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P2_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P2_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p3 = {
+	.inp_state	= LPC32XX_GPIO_P3_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P3_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P3_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+struct lpc32xx_gpio_chip {
+	struct gpio_chip	chip;
+	struct gpio_regs	*gpio_grp;
+};
+
+static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio(
+	struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct lpc32xx_gpio_chip, chip);
+}
+
+static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	if (input)
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_clr);
+	else
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (input)
+		__raw_writel(u, group->gpio_grp->dir_clr);
+	else
+		__raw_writel(u, group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_set);
+	else
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_clr);
+}
+
+static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (high)
+		__raw_writel(u, group->gpio_grp->outp_set);
+	else
+		__raw_writel(u, group->gpio_grp->outp_clr);
+}
+
+static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
+	else
+		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
+}
+
+static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
+		pin);
+}
+
+static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	int state = __raw_readl(group->gpio_grp->inp_state);
+
+	/*
+	 * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
+	 * to bits 10..14, while GPIOP3-5 is mapped to bit 24.
+	 */
+	return GPIO3_PIN_IN_SEL(state, pin);
+}
+
+static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
+}
+
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p012(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p3(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip,
+	unsigned pin)
+{
+	return 0;
+}
+
+static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpio_state_p012(group, pin);
+}
+
+static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpio_state_p3(group, pin);
+}
+
+static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpi_state_p3(group, pin);
+}
+
+static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p012(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p3(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	return 0;
+}
+
+static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_level_p012(group, pin, value);
+}
+
+static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_level_p3(group, pin, value);
+}
+
+static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpo_level_p3(group, pin, value);
+}
+
+static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
+{
+	if (pin < chip->ngpio)
+		return 0;
+
+	return -EINVAL;
+}
+
+static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
+	{
+		.chip = {
+			.label			= "gpio_p0",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P0_GRP,
+			.ngpio			= LPC32XX_GPIO_P0_MAX,
+			.names			= gpio_p0_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p0,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p1",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P1_GRP,
+			.ngpio			= LPC32XX_GPIO_P1_MAX,
+			.names			= gpio_p1_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p1,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p2",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P2_GRP,
+			.ngpio			= LPC32XX_GPIO_P2_MAX,
+			.names			= gpio_p2_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p2,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p3",
+			.direction_input	= lpc32xx_gpio_dir_input_p3,
+			.get			= lpc32xx_gpio_get_value_p3,
+			.direction_output	= lpc32xx_gpio_dir_output_p3,
+			.set			= lpc32xx_gpio_set_value_p3,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P3_GRP,
+			.ngpio			= LPC32XX_GPIO_P3_MAX,
+			.names			= gpio_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpi_p3",
+			.direction_input	= lpc32xx_gpio_dir_in_always,
+			.get			= lpc32xx_gpi_get_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPI_P3_GRP,
+			.ngpio			= LPC32XX_GPI_P3_MAX,
+			.names			= gpi_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpo_p3",
+			.direction_output	= lpc32xx_gpio_dir_out_always,
+			.set			= lpc32xx_gpo_set_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPO_P3_GRP,
+			.ngpio			= LPC32XX_GPO_P3_MAX,
+			.names			= gpo_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+};
+
+void __init lpc32xx_gpio_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
+		gpiochip_add(&lpc32xx_gpiochip[i].chip);
+}
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 2c212c732d76..740caed2b278 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -27,8 +27,9 @@
 #include <asm/mach/irq.h>
 
 #include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 /*
  * The GPIO module in the Nomadik family of Systems-on-Chip is an
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0599854e2217..9c27244fd680 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,7 +25,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <asm/mach/irq.h>
 
 struct gpio_bank {
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
new file mode 100644
index 000000000000..ee137712f9db
--- /dev/null
+++ b/drivers/gpio/gpio-pxa.c
@@ -0,0 +1,338 @@
+/*
+ *  linux/arch/arm/plat-pxa/gpio.c
+ *
+ *  Generic PXA GPIO handling
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+#include <linux/slab.h>
+
+#include <mach/gpio-pxa.h>
+
+int pxa_last_gpio;
+
+struct pxa_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem	*regbase;
+	char label[10];
+
+	unsigned long	irq_mask;
+	unsigned long	irq_edge_rise;
+	unsigned long	irq_edge_fall;
+
+#ifdef CONFIG_PM
+	unsigned long	saved_gplr;
+	unsigned long	saved_gpdr;
+	unsigned long	saved_grer;
+	unsigned long	saved_gfer;
+#endif
+};
+
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chips;
+
+#define for_each_gpio_chip(i, c)			\
+	for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
+{
+	return container_of(c, struct pxa_gpio_chip, chip)->regbase;
+}
+
+static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
+{
+	return &pxa_gpio_chips[gpio_to_bank(gpio)];
+}
+
+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *base = gpio_chip_base(chip);
+	uint32_t value, mask = 1 << offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	value = __raw_readl(base + GPDR_OFFSET);
+	if (__gpio_is_inverted(chip->base + offset))
+		value |= mask;
+	else
+		value &= ~mask;
+	__raw_writel(value, base + GPDR_OFFSET);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+static int pxa_gpio_direction_output(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	void __iomem *base = gpio_chip_base(chip);
+	uint32_t tmp, mask = 1 << offset;
+	unsigned long flags;
+
+	__raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	tmp = __raw_readl(base + GPDR_OFFSET);
+	if (__gpio_is_inverted(chip->base + offset))
+		tmp &= ~mask;
+	else
+		tmp |= mask;
+	__raw_writel(tmp, base + GPDR_OFFSET);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+}
+
+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	__raw_writel(1 << offset, gpio_chip_base(chip) +
+				(value ? GPSR_OFFSET : GPCR_OFFSET));
+}
+
+static int __init pxa_init_gpio_chip(int gpio_end)
+{
+	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+	struct pxa_gpio_chip *chips;
+
+	chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
+	if (chips == NULL) {
+		pr_err("%s: failed to allocate GPIO chips\n", __func__);
+		return -ENOMEM;
+	}
+
+	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+		struct gpio_chip *c = &chips[i].chip;
+
+		sprintf(chips[i].label, "gpio-%d", i);
+		chips[i].regbase = GPIO_BANK(i);
+
+		c->base  = gpio;
+		c->label = chips[i].label;
+
+		c->direction_input  = pxa_gpio_direction_input;
+		c->direction_output = pxa_gpio_direction_output;
+		c->get = pxa_gpio_get;
+		c->set = pxa_gpio_set;
+
+		/* number of GPIOs on last bank may be less than 32 */
+		c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+		gpiochip_add(c);
+	}
+	pxa_gpio_chips = chips;
+	return 0;
+}
+
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_chip *c)
+{
+	uint32_t grer, gfer;
+
+	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+	grer |= c->irq_edge_rise & c->irq_mask;
+	gfer |= c->irq_edge_fall & c->irq_mask;
+	__raw_writel(grer, c->regbase + GRER_OFFSET);
+	__raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct pxa_gpio_chip *c;
+	int gpio = irq_to_gpio(d->irq);
+	unsigned long gpdr, mask = GPIO_bit(gpio);
+
+	c = gpio_to_pxachip(gpio);
+
+	if (type == IRQ_TYPE_PROBE) {
+		/* Don't mess with enabled GPIOs using preconfigured edges or
+		 * GPIOs set to alternate function or to output during probe
+		 */
+		if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
+			return 0;
+
+		if (__gpio_is_occupied(gpio))
+			return 0;
+
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+
+	if (__gpio_is_inverted(gpio))
+		__raw_writel(gpdr | mask,  c->regbase + GPDR_OFFSET);
+	else
+		__raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		c->irq_edge_rise |= mask;
+	else
+		c->irq_edge_rise &= ~mask;
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		c->irq_edge_fall |= mask;
+	else
+		c->irq_edge_fall &= ~mask;
+
+	update_edge_detect(c);
+
+	pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio,
+		((type & IRQ_TYPE_EDGE_RISING)  ? " rising"  : ""),
+		((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
+	return 0;
+}
+
+static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct pxa_gpio_chip *c;
+	int loop, gpio, gpio_base, n;
+	unsigned long gedr;
+
+	do {
+		loop = 0;
+		for_each_gpio_chip(gpio, c) {
+			gpio_base = c->chip.base;
+
+			gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+			gedr = gedr & c->irq_mask;
+			__raw_writel(gedr, c->regbase + GEDR_OFFSET);
+
+			n = find_first_bit(&gedr, BITS_PER_LONG);
+			while (n < BITS_PER_LONG) {
+				loop = 1;
+
+				generic_handle_irq(gpio_to_irq(gpio_base + n));
+				n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
+			}
+		}
+	} while (loop);
+}
+
+static void pxa_ack_muxed_gpio(struct irq_data *d)
+{
+	int gpio = irq_to_gpio(d->irq);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+
+	__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+}
+
+static void pxa_mask_muxed_gpio(struct irq_data *d)
+{
+	int gpio = irq_to_gpio(d->irq);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+	uint32_t grer, gfer;
+
+	c->irq_mask &= ~GPIO_bit(gpio);
+
+	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+	__raw_writel(grer, c->regbase + GRER_OFFSET);
+	__raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static void pxa_unmask_muxed_gpio(struct irq_data *d)
+{
+	int gpio = irq_to_gpio(d->irq);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+
+	c->irq_mask |= GPIO_bit(gpio);
+	update_edge_detect(c);
+}
+
+static struct irq_chip pxa_muxed_gpio_chip = {
+	.name		= "GPIO",
+	.irq_ack	= pxa_ack_muxed_gpio,
+	.irq_mask	= pxa_mask_muxed_gpio,
+	.irq_unmask	= pxa_unmask_muxed_gpio,
+	.irq_set_type	= pxa_gpio_irq_type,
+};
+
+void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+{
+	struct pxa_gpio_chip *c;
+	int gpio, irq;
+
+	pxa_last_gpio = end;
+
+	/* Initialize GPIO chips */
+	pxa_init_gpio_chip(end);
+
+	/* clear all GPIO edge detects */
+	for_each_gpio_chip(gpio, c) {
+		__raw_writel(0, c->regbase + GFER_OFFSET);
+		__raw_writel(0, c->regbase + GRER_OFFSET);
+		__raw_writel(~0,c->regbase + GEDR_OFFSET);
+	}
+
+	for (irq  = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+		irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+					 handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/* Install handler for GPIO>=2 edge detect interrupts */
+	irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
+	pxa_muxed_gpio_chip.irq_set_wake = fn;
+}
+
+#ifdef CONFIG_PM
+static int pxa_gpio_suspend(void)
+{
+	struct pxa_gpio_chip *c;
+	int gpio;
+
+	for_each_gpio_chip(gpio, c) {
+		c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
+		c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+		c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
+		c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+
+		/* Clear GPIO transition detect bits */
+		__raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+	}
+	return 0;
+}
+
+static void pxa_gpio_resume(void)
+{
+	struct pxa_gpio_chip *c;
+	int gpio;
+
+	for_each_gpio_chip(gpio, c) {
+		/* restore level with set/clear */
+		__raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
+		__raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+
+		__raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
+		__raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
+		__raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+	}
+}
+#else
+#define pxa_gpio_suspend	NULL
+#define pxa_gpio_resume		NULL
+#endif
+
+struct syscore_ops pxa_gpio_syscore_ops = {
+	.suspend	= pxa_gpio_suspend,
+	.resume		= pxa_gpio_resume,
+};
diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c
new file mode 100644
index 000000000000..b6c1f6d80649
--- /dev/null
+++ b/drivers/gpio/gpio-sa1100.c
@@ -0,0 +1,63 @@
+/*
+ * linux/arch/arm/mach-sa1100/gpio.c
+ *
+ * Generic SA-1100 GPIO handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <mach/hardware.h>
+
+static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return GPLR & GPIO_GPIO(offset);
+}
+
+static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (value)
+		GPSR = GPIO_GPIO(offset);
+	else
+		GPCR = GPIO_GPIO(offset);
+}
+
+static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	GPDR &= ~GPIO_GPIO(offset);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sa1100_gpio_set(chip, offset, value);
+	GPDR |= GPIO_GPIO(offset);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static struct gpio_chip sa1100_gpio_chip = {
+	.label			= "gpio",
+	.direction_input	= sa1100_direction_input,
+	.direction_output	= sa1100_direction_output,
+	.set			= sa1100_gpio_set,
+	.get			= sa1100_gpio_get,
+	.base			= 0,
+	.ngpio			= GPIO_MAX + 1,
+};
+
+void __init sa1100_init_gpio(void)
+{
+	gpiochip_add(&sa1100_gpio_chip);
+}
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 747eb40e8afe..6b65207c8106 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -27,6 +27,7 @@
 
 #include <asm/mach/irq.h>
 
+#include <mach/gpio-tegra.h>
 #include <mach/iomap.h>
 #include <mach/suspend.h>
 
@@ -134,7 +135,10 @@ static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
 	return 0;
 }
 
-
+static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return TEGRA_GPIO_TO_IRQ(offset);
+}
 
 static struct gpio_chip tegra_gpio_chip = {
 	.label			= "tegra-gpio",
@@ -142,6 +146,7 @@ static struct gpio_chip tegra_gpio_chip = {
 	.get			= tegra_gpio_get,
 	.direction_output	= tegra_gpio_direction_output,
 	.set			= tegra_gpio_set,
+	.to_irq			= tegra_gpio_to_irq,
 	.base			= 0,
 	.ngpio			= TEGRA_NR_GPIOS,
 };
@@ -331,6 +336,7 @@ static struct lock_class_key gpio_lock_class;
 static int __init tegra_gpio_init(void)
 {
 	struct tegra_gpio_bank *bank;
+	int gpio;
 	int i;
 	int j;
 
@@ -352,14 +358,17 @@ static int __init tegra_gpio_init(void)
 
 	gpiochip_add(&tegra_gpio_chip);
 
-	for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
-		bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
+	for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
+		int irq = TEGRA_GPIO_TO_IRQ(gpio);
+		/* No validity check; all Tegra GPIOs are valid IRQs */
+
+		bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
 
-		irq_set_lockdep_class(i, &gpio_lock_class);
-		irq_set_chip_data(i, bank);
-		irq_set_chip_and_handler(i, &tegra_gpio_irq_chip,
+		irq_set_lockdep_class(irq, &gpio_lock_class);
+		irq_set_chip_data(irq, bank);
+		irq_set_chip_and_handler(irq, &tegra_gpio_irq_chip,
 					 handle_simple_irq);
-		set_irq_flags(i, IRQF_VALID);
+		set_irq_flags(irq, IRQF_VALID);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
diff --git a/drivers/gpio/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
new file mode 100644
index 000000000000..3fa3e2867e19
--- /dev/null
+++ b/drivers/gpio/gpio-tnetv107x.c
@@ -0,0 +1,205 @@
+/*
+ * Texas Instruments TNETV107X GPIO Controller
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <mach/common.h>
+#include <mach/tnetv107x.h>
+
+struct tnetv107x_gpio_regs {
+	u32	idver;
+	u32	data_in[3];
+	u32	data_out[3];
+	u32	direction[3];
+	u32	enable[3];
+};
+
+#define gpio_reg_index(gpio)	((gpio) >> 5)
+#define gpio_reg_bit(gpio)	BIT((gpio) & 0x1f)
+
+#define gpio_reg_rmw(reg, mask, val)	\
+	__raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg))
+
+#define gpio_reg_set_bit(reg, gpio)	\
+	gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio))
+
+#define gpio_reg_clear_bit(reg, gpio)	\
+	gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0)
+
+#define gpio_reg_get_bit(reg, gpio)	\
+	(__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio))
+
+#define chip2controller(chip)		\
+	container_of(chip, struct davinci_gpio_controller, chip)
+
+#define TNETV107X_GPIO_CTLRS	DIV_ROUND_UP(TNETV107X_N_GPIO, 32)
+
+static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS];
+
+static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_set_bit(regs->enable, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_clear_bit(regs->enable, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_set_bit(regs->direction, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static int tnetv107x_gpio_dir_out(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	if (value)
+		gpio_reg_set_bit(regs->data_out, gpio);
+	else
+		gpio_reg_clear_bit(regs->data_out, gpio);
+
+	gpio_reg_clear_bit(regs->direction, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	int ret;
+
+	ret = gpio_reg_get_bit(regs->data_in, gpio);
+
+	return ret ? 1 : 0;
+}
+
+static void tnetv107x_gpio_set(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	if (value)
+		gpio_reg_set_bit(regs->data_out, gpio);
+	else
+		gpio_reg_clear_bit(regs->data_out, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static int __init tnetv107x_gpio_setup(void)
+{
+	int i, base;
+	unsigned ngpio;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct tnetv107x_gpio_regs *regs;
+	struct davinci_gpio_controller *ctlr;
+
+	if (soc_info->gpio_type != GPIO_TYPE_TNETV107X)
+		return 0;
+
+	ngpio = soc_info->gpio_num;
+	if (ngpio == 0) {
+		pr_err("GPIO setup:  how many GPIOs?\n");
+		return -EINVAL;
+	}
+
+	if (WARN_ON(TNETV107X_N_GPIO < ngpio))
+		ngpio = TNETV107X_N_GPIO;
+
+	regs = ioremap(soc_info->gpio_base, SZ_4K);
+	if (WARN_ON(!regs))
+		return -EINVAL;
+
+	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
+		ctlr = &chips[i];
+
+		ctlr->chip.label	= "tnetv107x";
+		ctlr->chip.can_sleep	= 0;
+		ctlr->chip.base		= base;
+		ctlr->chip.ngpio	= ngpio - base;
+		if (ctlr->chip.ngpio > 32)
+			ctlr->chip.ngpio = 32;
+
+		ctlr->chip.request		= tnetv107x_gpio_request;
+		ctlr->chip.free			= tnetv107x_gpio_free;
+		ctlr->chip.direction_input	= tnetv107x_gpio_dir_in;
+		ctlr->chip.get			= tnetv107x_gpio_get;
+		ctlr->chip.direction_output	= tnetv107x_gpio_dir_out;
+		ctlr->chip.set			= tnetv107x_gpio_set;
+
+		spin_lock_init(&ctlr->lock);
+
+		ctlr->regs	= regs;
+		ctlr->set_data	= &regs->data_out[i];
+		ctlr->clr_data	= &regs->data_out[i];
+		ctlr->in_data	= &regs->data_in[i];
+
+		gpiochip_add(&ctlr->chip);
+	}
+
+	soc_info->gpio_ctlrs = chips;
+	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+	return 0;
+}
+pure_initcall(tnetv107x_gpio_setup);
diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c
index 53e8255cb0ba..4035778852b0 100644
--- a/drivers/gpio/gpio-u300.c
+++ b/drivers/gpio/gpio-u300.c
@@ -1,18 +1,17 @@
 /*
  * U300 GPIO module.
  *
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2011 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * This can driver either of the two basic GPIO cores
  * available in the U300 platforms:
  * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
  * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
- * Notice that you also have inline macros in <asm-arch/gpio.h>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
  * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
  */
 #include <linux/module.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -21,677 +20,898 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <mach/gpio-u300.h>
 
-/* Reference to GPIO block clock */
-static struct clk *clk;
+/*
+ * Bias modes for U300 GPIOs
+ *
+ * GPIO_U300_CONFIG_BIAS_UNKNOWN: this bias mode is not known to us
+ * GPIO_U300_CONFIG_BIAS_FLOAT: no specific bias, the GPIO will float or state
+ *	is not controlled by software
+ * GPIO_U300_CONFIG_BIAS_PULL_UP: the GPIO will be pulled up (usually with high
+ *	impedance to VDD)
+ */
+#define GPIO_U300_CONFIG_BIAS_UNKNOWN	0x1000
+#define GPIO_U300_CONFIG_BIAS_FLOAT	0x1001
+#define GPIO_U300_CONFIG_BIAS_PULL_UP	0x1002
 
-/* Memory resource */
-static struct resource *memres;
-static void __iomem *virtbase;
-static struct device *gpiodev;
+/*
+ * Drive modes for U300 GPIOs (output)
+ *
+ * GPIO_U300_CONFIG_DRIVE_PUSH_PULL: the GPIO will be driven actively high and
+ *	low, this is the most typical case and is typically achieved with two
+ *	active transistors on the output
+ * GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain
+ *	(open collector) which means it is usually wired with other output
+ *	ports which are then pulled up with an external resistor
+ * GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: the GPIO will be driven with open drain
+ *	(open emitter) which is the same as open drain mutatis mutandis but
+ *	pulled to ground
+ */
+#define GPIO_U300_CONFIG_DRIVE_PUSH_PULL	0x2000
+#define GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN	0x2001
+#define GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE	0x2002
+
+/*
+ * Register definitions for COH 901 335 variant
+ */
+#define U300_335_PORT_STRIDE				(0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_335_PXPDIR					(0x00)
+#define U300_335_PXPDOR					(0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_335_PXPCR					(0x04)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_335_PXIEV					(0x08)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_335_PXIEN					(0x0C)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_335_PXIFR					(0x10)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_335_PXICR					(0x14)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_335_PXPER					(0x18)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_335_CR					(0x54)
+#define U300_335_CR_BLOCK_CLOCK_ENABLE			(0x00000001UL)
+
+/*
+ * Register definitions for COH 901 571 / 3 variant
+ */
+#define U300_571_PORT_STRIDE				(0x30)
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2  (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_571_CR					(0x00)
+#define U300_571_CR_SYNC_SEL_ENABLE			(0x00000002UL)
+#define U300_571_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)
+/*
+ * These registers have the same layout and function as the corresponding
+ * COH 901 335 registers, just at different offset.
+ */
+#define U300_571_PXPDIR					(0x04)
+#define U300_571_PXPDOR					(0x08)
+#define U300_571_PXPCR					(0x0C)
+#define U300_571_PXPER					(0x10)
+#define U300_571_PXIEV					(0x14)
+#define U300_571_PXIEN					(0x18)
+#define U300_571_PXIFR					(0x1C)
+#define U300_571_PXICR					(0x20)
+
+/* 8 bits per port, no version has more than 7 ports */
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7)
+
+struct u300_gpio {
+	struct gpio_chip chip;
+	struct list_head port_list;
+	struct clk *clk;
+	struct resource *memres;
+	void __iomem *base;
+	struct device *dev;
+	int irq_base;
+	u32 stride;
+	/* Register offsets */
+	u32 pcr;
+	u32 dor;
+	u32 dir;
+	u32 per;
+	u32 icr;
+	u32 ien;
+	u32 iev;
+};
 
 struct u300_gpio_port {
-	const char *name;
+	struct list_head node;
+	struct u300_gpio *gpio;
+	char name[8];
 	int irq;
 	int number;
+	u8 toggle_edge_mode;
 };
 
+/*
+ * Macro to expand to read a specific register found in the "gpio"
+ * struct. It requires the struct u300_gpio *gpio variable to exist in
+ * its context. It calculates the port offset from the given pin
+ * offset, muliplies by the port stride and adds the register offset
+ * so it provides a pointer to the desired register.
+ */
+#define U300_PIN_REG(pin, reg) \
+	(gpio->base + (pin >> 3) * gpio->stride + gpio->reg)
 
-static struct u300_gpio_port gpio_ports[] = {
-	{
-		.name = "gpio0",
-		.number = 0,
-	},
-	{
-		.name = "gpio1",
-		.number = 1,
-	},
-	{
-		.name = "gpio2",
-		.number = 2,
-	},
-#ifdef U300_COH901571_3
-	{
-		.name = "gpio3",
-		.number = 3,
-	},
-	{
-		.name = "gpio4",
-		.number = 4,
-	},
-#ifdef CONFIG_MACH_U300_BS335
-	{
-		.name = "gpio5",
-		.number = 5,
-	},
-	{
-		.name = "gpio6",
-		.number = 6,
-	},
-#endif
-#endif
+/*
+ * Provides a bitmask for a specific gpio pin inside an 8-bit GPIO
+ * register.
+ */
+#define U300_PIN_BIT(pin) \
+	(1 << (pin & 0x07))
 
+struct u300_gpio_confdata {
+	u16 bias_mode;
+	bool output;
+	int outval;
 };
 
+/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
+#define BS335_GPIO_NUM_PORTS 7
+/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
+#define BS365_GPIO_NUM_PORTS 5
 
-#ifdef U300_COH901571_3
+#define U300_FLOATING_INPUT { \
+	.bias_mode = GPIO_U300_CONFIG_BIAS_FLOAT, \
+	.output = false, \
+}
 
-/* Default input value */
-#define DEFAULT_OUTPUT_LOW   0
-#define DEFAULT_OUTPUT_HIGH  1
+#define U300_PULL_UP_INPUT { \
+	.bias_mode = GPIO_U300_CONFIG_BIAS_PULL_UP, \
+	.output = false, \
+}
 
-/* GPIO Pull-Up status */
-#define DISABLE_PULL_UP  0
-#define ENABLE_PULL_UP  1
+#define U300_OUTPUT_LOW { \
+	.output = true, \
+	.outval = 0, \
+}
 
-#define GPIO_NOT_USED 0
-#define GPIO_IN       1
-#define GPIO_OUT      2
+#define U300_OUTPUT_HIGH { \
+	.output = true, \
+	.outval = 1, \
+}
 
-struct u300_gpio_configuration_data {
-	unsigned char pin_usage;
-	unsigned char default_output_value;
-	unsigned char pull_up;
-};
 
 /* Initial configuration */
-const struct u300_gpio_configuration_data
-u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
-#ifdef CONFIG_MACH_U300_BS335
+static const struct __initdata u300_gpio_confdata
+bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	/* Port 0, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_HIGH,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	},
 	/* Port 1, pins 0-7 */
 	{
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_HIGH,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	},
 	/* Port 2, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
 	},
 	/* Port 3, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_PULL_UP_INPUT,
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 4, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 5, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 6, pind 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	}
-#endif
+};
 
-#ifdef CONFIG_MACH_U300_BS365
+static const struct __initdata u300_gpio_confdata
+bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	/* Port 0, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 1, pins 0-7 */
 	{
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_HIGH,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	},
 	/* Port 2, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
 	},
 	/* Port 3, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
 	},
 	/* Port 4, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
 		/* These 4 pins doesn't exist on DB3210 */
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	}
-#endif
 };
-#endif
 
-
-/* No users == we can power down GPIO */
-static int gpio_users;
-
-struct gpio_struct {
-	int (*callback)(void *);
-	void *data;
-	int users;
-};
-
-static struct gpio_struct gpio_pin[U300_GPIO_MAX];
-
-/*
- * Let drivers register callback in order to get notified when there is
- * an interrupt on the gpio pin
+/**
+ * to_u300_gpio() - get the pointer to u300_gpio
+ * @chip: the gpio chip member of the structure u300_gpio
  */
-int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+static inline struct u300_gpio *to_u300_gpio(struct gpio_chip *chip)
 {
-	if (gpio_pin[gpio].callback)
-		dev_warn(gpiodev, "%s: WARNING: callback already "
-			 "registered for gpio pin#%d\n", __func__, gpio);
-	gpio_pin[gpio].callback = func;
-	gpio_pin[gpio].data = data;
-
-	return 0;
+	return container_of(chip, struct u300_gpio, chip);
 }
-EXPORT_SYMBOL(gpio_register_callback);
 
-int gpio_unregister_callback(unsigned gpio)
+static int u300_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	if (!gpio_pin[gpio].callback)
-		dev_warn(gpiodev, "%s: WARNING: callback already "
-			 "unregistered for gpio pin#%d\n", __func__, gpio);
-	gpio_pin[gpio].callback = NULL;
-	gpio_pin[gpio].data = NULL;
+	struct u300_gpio *gpio = to_u300_gpio(chip);
 
-	return 0;
+	return readl(U300_PIN_REG(offset, dir)) & U300_PIN_BIT(offset);
 }
-EXPORT_SYMBOL(gpio_unregister_callback);
 
-/* Non-zero means valid */
-int gpio_is_valid(int number)
+static void u300_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	if (number >= 0 &&
-	    number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
-		return 1;
-	return 0;
-}
-EXPORT_SYMBOL(gpio_is_valid);
+	struct u300_gpio *gpio = to_u300_gpio(chip);
+	unsigned long flags;
+	u32 val;
 
-int gpio_request(unsigned gpio, const char *label)
-{
-	if (gpio_pin[gpio].users)
-		return -EINVAL;
-	else
-		gpio_pin[gpio].users++;
+	local_irq_save(flags);
 
-	gpio_users++;
+	val = readl(U300_PIN_REG(offset, dor));
+	if (value)
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
+	else
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
 
-	return 0;
+	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(gpio_request);
 
-void gpio_free(unsigned gpio)
+static int u300_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
-	gpio_users--;
-	gpio_pin[gpio].users--;
-	if (unlikely(gpio_pin[gpio].users < 0)) {
-		dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
-			 gpio);
-		gpio_pin[gpio].users = 0;
-	}
-
-	return;
-}
-EXPORT_SYMBOL(gpio_free);
+	struct u300_gpio *gpio = to_u300_gpio(chip);
+	unsigned long flags;
+	u32 val;
 
-/* This returns zero or nonzero */
-int gpio_get_value(unsigned gpio)
-{
-	return readl(virtbase + U300_GPIO_PXPDIR +
-	  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+	local_irq_save(flags);
+	val = readl(U300_PIN_REG(offset, pcr));
+	/* Mask out this pin, note 2 bits per setting */
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((offset & 0x07) << 1));
+	writel(val, U300_PIN_REG(offset, pcr));
+	local_irq_restore(flags);
+	return 0;
 }
-EXPORT_SYMBOL(gpio_get_value);
 
-/*
- * We hope that the compiler will optimize away the unused branch
- * in case "value" is a constant
- */
-void gpio_set_value(unsigned gpio, int value)
+static int u300_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				      int value)
 {
-	u32 val;
+	struct u300_gpio *gpio = to_u300_gpio(chip);
 	unsigned long flags;
+	u32 oldmode;
+	u32 val;
 
 	local_irq_save(flags);
-	if (value) {
-		/* set */
-		val = readl(virtbase + U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
-		  & (1 << (gpio & 0x07));
-		writel(val | (1 << (gpio & 0x07)), virtbase +
-		  U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	} else {
-		/* clear */
-		val = readl(virtbase + U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
-		  & (1 << (gpio & 0x07));
-		writel(val & ~(1 << (gpio & 0x07)), virtbase +
-		  U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	val = readl(U300_PIN_REG(offset, pcr));
+	/*
+	 * Drive mode must be set by the special mode set function, set
+	 * push/pull mode by default if no mode has been selected.
+	 */
+	oldmode = val & (U300_GPIO_PXPCR_PIN_MODE_MASK <<
+			 ((offset & 0x07) << 1));
+	/* mode = 0 means input, else some mode is already set */
+	if (oldmode == 0) {
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK <<
+			 ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
 	}
+	u300_gpio_set(chip, offset, value);
 	local_irq_restore(flags);
+	return 0;
 }
-EXPORT_SYMBOL(gpio_set_value);
 
-int gpio_direction_input(unsigned gpio)
+static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
+	struct u300_gpio *gpio = to_u300_gpio(chip);
+	int retirq = gpio->irq_base + offset;
+
+	dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset,
+		retirq);
+	return retirq;
+}
+
+static int u300_gpio_config(struct gpio_chip *chip, unsigned offset,
+		     u16 param, unsigned long *data)
+{
+	struct u300_gpio *gpio = to_u300_gpio(chip);
 	unsigned long flags;
 	u32 val;
 
-	if (gpio > U300_GPIO_MAX)
-		return -EINVAL;
-
 	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask out this pin*/
-	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
-	/* This is not needed since it sets the bits to zero.*/
-	/* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
-	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
+	switch (param) {
+	case GPIO_U300_CONFIG_BIAS_UNKNOWN:
+	case GPIO_U300_CONFIG_BIAS_FLOAT:
+		val = readl(U300_PIN_REG(offset, per));
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+		break;
+	case GPIO_U300_CONFIG_BIAS_PULL_UP:
+		val = readl(U300_PIN_REG(offset, per));
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+		break;
+	case GPIO_U300_CONFIG_DRIVE_PUSH_PULL:
+		val = readl(U300_PIN_REG(offset, pcr));
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+			 << ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
+		break;
+	case GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN:
+		val = readl(U300_PIN_REG(offset, pcr));
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+			 << ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
+		break;
+	case GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE:
+		val = readl(U300_PIN_REG(offset, pcr));
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+			 << ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
+		break;
+	default:
+		local_irq_restore(flags);
+		dev_err(gpio->dev, "illegal configuration requested\n");
+		return -EINVAL;
+	}
 	local_irq_restore(flags);
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned gpio, int value)
+static struct gpio_chip u300_gpio_chip = {
+	.label			= "u300-gpio-chip",
+	.owner			= THIS_MODULE,
+	.get			= u300_gpio_get,
+	.set			= u300_gpio_set,
+	.direction_input	= u300_gpio_direction_input,
+	.direction_output	= u300_gpio_direction_output,
+	.to_irq			= u300_gpio_to_irq,
+};
+
+static void u300_toggle_trigger(struct u300_gpio *gpio, unsigned offset)
 {
-	unsigned long flags;
 	u32 val;
 
-	if (gpio > U300_GPIO_MAX)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask out this pin */
-	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
-	/*
-	 * FIXME: configure for push/pull, open drain or open source per pin
-	 * in setup. The current driver will only support push/pull.
-	 */
-	val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
-			<< ((gpio & 0x07) << 1));
-	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	gpio_set_value(gpio, value);
-	local_irq_restore(flags);
-	return 0;
+	val = readl(U300_PIN_REG(offset, icr));
+	/* Set mode depending on state */
+	if (u300_gpio_get(&gpio->chip, offset)) {
+		/* High now, let's trigger on falling edge next then */
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		dev_dbg(gpio->dev, "next IRQ on falling edge on pin %d\n",
+			offset);
+	} else {
+		/* Low now, let's trigger on rising edge next then */
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		dev_dbg(gpio->dev, "next IRQ on rising edge on pin %d\n",
+			offset);
+	}
 }
-EXPORT_SYMBOL(gpio_direction_output);
 
-/*
- * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
- */
-void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+static int u300_gpio_irq_type(struct irq_data *d, unsigned trigger)
 {
+	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+	struct u300_gpio *gpio = port->gpio;
+	int offset = d->irq - gpio->irq_base;
 	u32 val;
-	unsigned long flags;
-	local_irq_save(flags);
 
-	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val |= (1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	if (edge)
-		val |= (1 << (gpio & 0x07));
-	else
-		val &= ~(1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	local_irq_restore(flags);
+	if ((trigger & IRQF_TRIGGER_RISING) &&
+	    (trigger & IRQF_TRIGGER_FALLING)) {
+		/*
+		 * The GPIO block can only trigger on falling OR rising edges,
+		 * not both. So we need to toggle the mode whenever the pin
+		 * goes from one state to the other with a special state flag
+		 */
+		dev_dbg(gpio->dev,
+			"trigger on both rising and falling edge on pin %d\n",
+			offset);
+		port->toggle_edge_mode |= U300_PIN_BIT(offset);
+		u300_toggle_trigger(gpio, offset);
+	} else if (trigger & IRQF_TRIGGER_RISING) {
+		dev_dbg(gpio->dev, "trigger on rising edge on pin %d\n",
+			offset);
+		val = readl(U300_PIN_REG(offset, icr));
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+	} else if (trigger & IRQF_TRIGGER_FALLING) {
+		dev_dbg(gpio->dev, "trigger on falling edge on pin %d\n",
+			offset);
+		val = readl(U300_PIN_REG(offset, icr));
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+	}
+
+	return 0;
 }
-EXPORT_SYMBOL(enable_irq_on_gpio_pin);
 
-void disable_irq_on_gpio_pin(unsigned gpio)
+static void u300_gpio_irq_enable(struct irq_data *d)
 {
+	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+	struct u300_gpio *gpio = port->gpio;
+	int offset = d->irq - gpio->irq_base;
 	u32 val;
 	unsigned long flags;
 
 	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val &= ~(1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
+	val = readl(U300_PIN_REG(offset, ien));
+	writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(disable_irq_on_gpio_pin);
 
-/* Enable (value == 0) or disable (value == 1) internal pullup */
-void gpio_pullup(unsigned gpio, int value)
+static void u300_gpio_irq_disable(struct irq_data *d)
 {
+	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+	struct u300_gpio *gpio = port->gpio;
+	int offset = d->irq - gpio->irq_base;
 	u32 val;
 	unsigned long flags;
 
 	local_irq_save(flags);
-	if (value) {
-		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
-					U300_GPIO_PORTX_SPACING);
-		writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
-				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	} else {
-		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
-					U300_GPIO_PORTX_SPACING);
-		writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
-				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	}
+	val = readl(U300_PIN_REG(offset, ien));
+	writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(gpio_pullup);
 
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+static struct irq_chip u300_gpio_irqchip = {
+	.name			= "u300-gpio-irqchip",
+	.irq_enable		= u300_gpio_irq_enable,
+	.irq_disable		= u300_gpio_irq_disable,
+	.irq_set_type		= u300_gpio_irq_type,
+
+};
+
+static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct u300_gpio_port *port = dev_id;
-	u32 val;
-	int pin;
+	struct u300_gpio_port *port = irq_get_handler_data(irq);
+	struct u300_gpio *gpio = port->gpio;
+	int pinoffset = port->number << 3; /* get the right stride */
+	unsigned long val;
 
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
 	/* Read event register */
-	val = readl(virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask with enable register */
-	val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
+	val = readl(U300_PIN_REG(pinoffset, iev));
 	/* Mask relevant bits */
-	val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+	val &= 0xFFU; /* 8 bits per port */
 	/* ACK IRQ (clear event) */
-	writel(val, virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
-	/* Print message */
-	while (val != 0) {
-		unsigned gpio;
-
-		pin = __ffs(val);
-		/* mask off this pin */
-		val &= ~(1 << pin);
-		gpio = (port->number << 3) + pin;
-
-		if (gpio_pin[gpio].callback)
-			(void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
-		else
-			dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
-			       gpio);
+	writel(val, U300_PIN_REG(pinoffset, iev));
+
+	/* Call IRQ handler */
+	if (val != 0) {
+		int irqoffset;
+
+		for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) {
+			int pin_irq = gpio->irq_base + (port->number << 3)
+				+ irqoffset;
+			int offset = pinoffset + irqoffset;
+
+			dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n",
+				pin_irq, offset);
+			generic_handle_irq(pin_irq);
+			/*
+			 * Triggering IRQ on both rising and falling edge
+			 * needs mockery
+			 */
+			if (port->toggle_edge_mode & U300_PIN_BIT(offset))
+				u300_toggle_trigger(gpio, offset);
+		}
 	}
-	return IRQ_HANDLED;
+
+	desc->irq_data.chip->irq_unmask(&desc->irq_data);
 }
 
-static void gpio_set_initial_values(void)
+static void __init u300_gpio_init_pin(struct u300_gpio *gpio,
+				      int offset,
+				      const struct u300_gpio_confdata *conf)
 {
-#ifdef U300_COH901571_3
-	int i, j;
-	unsigned long flags;
-	u32 val;
+	/* Set mode: input or output */
+	if (conf->output) {
+		u300_gpio_direction_output(&gpio->chip, offset, conf->outval);
 
-	/* Write default values to all pins */
-	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
-		val = 0;
-		for (j = 0; j < 8; j++)
-			val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
-		local_irq_save(flags);
-		writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
-		local_irq_restore(flags);
+		/* Deactivate bias mode for output */
+		u300_gpio_config(&gpio->chip, offset,
+				 GPIO_U300_CONFIG_BIAS_FLOAT,
+				 NULL);
+
+		/* Set drive mode for output */
+		u300_gpio_config(&gpio->chip, offset,
+				 GPIO_U300_CONFIG_DRIVE_PUSH_PULL, NULL);
+
+		dev_dbg(gpio->dev, "set up pin %d as output, value: %d\n",
+			offset, conf->outval);
+	} else {
+		u300_gpio_direction_input(&gpio->chip, offset);
+
+		/* Always set output low on input pins */
+		u300_gpio_set(&gpio->chip, offset, 0);
+
+		/* Set bias mode for input */
+		u300_gpio_config(&gpio->chip, offset, conf->bias_mode, NULL);
+
+		dev_dbg(gpio->dev, "set up pin %d as input, bias: %04x\n",
+			offset, conf->bias_mode);
 	}
+}
 
-	/*
-	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
-	 * to output and 'GPIO_IN' to input for each port. And initialize
-	 * default value on outputs.
-	 */
-	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
-		for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
-			local_irq_save(flags);
-			val = readl(virtbase + U300_GPIO_PXPCR +
-					 i * U300_GPIO_PORTX_SPACING);
-			/* Mask out this pin */
-			val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
-
-			if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
-				val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
-			writel(val, virtbase + U300_GPIO_PXPCR +
-					 i * U300_GPIO_PORTX_SPACING);
-			local_irq_restore(flags);
+static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio,
+				     struct u300_gpio_platform *plat)
+{
+	int i, j;
+
+	/* Write default config and values to all pins */
+	for (i = 0; i < plat->ports; i++) {
+		for (j = 0; j < 8; j++) {
+			const struct u300_gpio_confdata *conf;
+			int offset = (i*8) + j;
+
+			if (plat->variant == U300_GPIO_COH901571_3_BS335)
+				conf = &bs335_gpio_config[i][j];
+			else if (plat->variant == U300_GPIO_COH901571_3_BS365)
+				conf = &bs365_gpio_config[i][j];
+			else
+				break;
+
+			u300_gpio_init_pin(gpio, offset, conf);
 		}
 	}
+}
 
-	/* Enable or disable the internal pull-ups in the GPIO ASIC block */
-	for (i = 0; i < U300_GPIO_MAX; i++) {
-		val = 0;
-		for (j = 0; j < 8; j++)
-			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
-		local_irq_save(flags);
-		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
-		local_irq_restore(flags);
+static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
+{
+	struct u300_gpio_port *port;
+	struct list_head *p, *n;
+
+	list_for_each_safe(p, n, &gpio->port_list) {
+		port = list_entry(p, struct u300_gpio_port, node);
+		list_del(&port->node);
+		free_irq(port->irq, port);
+		kfree(port);
 	}
-#endif
 }
 
-static int __init gpio_probe(struct platform_device *pdev)
+static int __init u300_gpio_probe(struct platform_device *pdev)
 {
-	u32 val;
+	struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+	struct u300_gpio *gpio;
 	int err = 0;
+	int portno;
+	u32 val;
+	u32 ifr;
 	int i;
-	int num_irqs;
 
-	gpiodev = &pdev->dev;
-	memset(gpio_pin, 0, sizeof(gpio_pin));
+	gpio = kzalloc(sizeof(struct u300_gpio), GFP_KERNEL);
+	if (gpio == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	gpio->chip = u300_gpio_chip;
+	gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT;
+	gpio->irq_base = plat->gpio_irq_base;
+	gpio->chip.dev = &pdev->dev;
+	gpio->chip.base = plat->gpio_base;
+	gpio->dev = &pdev->dev;
 
 	/* Get GPIO clock */
-	clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		err = PTR_ERR(clk);
-		dev_err(gpiodev, "could not get GPIO clock\n");
+	gpio->clk = clk_get(gpio->dev, NULL);
+	if (IS_ERR(gpio->clk)) {
+		err = PTR_ERR(gpio->clk);
+		dev_err(gpio->dev, "could not get GPIO clock\n");
 		goto err_no_clk;
 	}
-	err = clk_enable(clk);
+	err = clk_enable(gpio->clk);
 	if (err) {
-		dev_err(gpiodev, "could not enable GPIO clock\n");
+		dev_err(gpio->dev, "could not enable GPIO clock\n");
 		goto err_no_clk_enable;
 	}
 
-	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!memres)
+	gpio->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!gpio->memres) {
+		dev_err(gpio->dev, "could not get GPIO memory resource\n");
+		err = -ENODEV;
 		goto err_no_resource;
+	}
 
-	if (!request_mem_region(memres->start, resource_size(memres),
+	if (!request_mem_region(gpio->memres->start,
+				resource_size(gpio->memres),
 				"GPIO Controller")) {
 		err = -ENODEV;
 		goto err_no_ioregion;
 	}
 
-	virtbase = ioremap(memres->start, resource_size(memres));
-	if (!virtbase) {
+	gpio->base = ioremap(gpio->memres->start, resource_size(gpio->memres));
+	if (!gpio->base) {
 		err = -ENOMEM;
 		goto err_no_ioremap;
 	}
-	dev_info(gpiodev, "remapped 0x%08x to %p\n",
-		 memres->start, virtbase);
-
-#ifdef U300_COH901335
-	dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
-	/* Turn on the GPIO block */
-	writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
-#ifdef U300_COH901571_3
-	dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
-	val = readl(virtbase + U300_GPIO_CR);
-	dev_info(gpiodev, "COH901571/3 block version: %d, " \
-	       "number of cores: %d\n",
-	       ((val & 0x0000FE00) >> 9),
-	       ((val & 0x000001FC) >> 2));
-	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
-	gpio_set_initial_values();
-
-	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
-
-		gpio_ports[num_irqs].irq =
-			platform_get_irq_byname(pdev,
-						gpio_ports[num_irqs].name);
-
-		err = request_irq(gpio_ports[num_irqs].irq,
-				  gpio_irq_handler, IRQF_DISABLED,
-				  gpio_ports[num_irqs].name,
-				  &gpio_ports[num_irqs]);
-		if (err) {
-			dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
-				gpio_ports[num_irqs].name);
-			goto err_no_irq;
+
+	if (plat->variant == U300_GPIO_COH901335) {
+		dev_info(gpio->dev,
+			 "initializing GPIO Controller COH 901 335\n");
+		gpio->stride = U300_335_PORT_STRIDE;
+		gpio->pcr = U300_335_PXPCR;
+		gpio->dor = U300_335_PXPDOR;
+		gpio->dir = U300_335_PXPDIR;
+		gpio->per = U300_335_PXPER;
+		gpio->icr = U300_335_PXICR;
+		gpio->ien = U300_335_PXIEN;
+		gpio->iev = U300_335_PXIEV;
+		ifr = U300_335_PXIFR;
+
+		/* Turn on the GPIO block */
+		writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
+		       gpio->base + U300_335_CR);
+	} else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+		   plat->variant == U300_GPIO_COH901571_3_BS365) {
+		dev_info(gpio->dev,
+			 "initializing GPIO Controller COH 901 571/3\n");
+		gpio->stride = U300_571_PORT_STRIDE;
+		gpio->pcr = U300_571_PXPCR;
+		gpio->dor = U300_571_PXPDOR;
+		gpio->dir = U300_571_PXPDIR;
+		gpio->per = U300_571_PXPER;
+		gpio->icr = U300_571_PXICR;
+		gpio->ien = U300_571_PXIEN;
+		gpio->iev = U300_571_PXIEV;
+		ifr = U300_571_PXIFR;
+
+		val = readl(gpio->base + U300_571_CR);
+		dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+			 "number of cores: %d totalling %d pins\n",
+			 ((val & 0x000001FC) >> 2),
+			 ((val & 0x0000FE00) >> 9),
+			 ((val & 0x0000FE00) >> 9) * 8);
+		writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
+		       gpio->base + U300_571_CR);
+		u300_gpio_init_coh901571(gpio, plat);
+	} else {
+		dev_err(gpio->dev, "unknown block variant\n");
+		err = -ENODEV;
+		goto err_unknown_variant;
+	}
+
+	/* Add each port with its IRQ separately */
+	INIT_LIST_HEAD(&gpio->port_list);
+	for (portno = 0 ; portno < plat->ports; portno++) {
+		struct u300_gpio_port *port =
+			kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL);
+
+		if (!port) {
+			dev_err(gpio->dev, "out of memory\n");
+			err = -ENOMEM;
+			goto err_no_port;
 		}
-		/* Turns off PortX_irq_force */
-		writel(0x0, virtbase + U300_GPIO_PXIFR +
-				 num_irqs * U300_GPIO_PORTX_SPACING);
+
+		snprintf(port->name, 8, "gpio%d", portno);
+		port->number = portno;
+		port->gpio = gpio;
+
+		port->irq = platform_get_irq_byname(pdev,
+						    port->name);
+
+		dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq,
+			port->name);
+
+		irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
+		irq_set_handler_data(port->irq, port);
+
+		/* For each GPIO pin set the unique IRQ handler */
+		for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) {
+			int irqno = gpio->irq_base + (portno << 3) + i;
+
+			dev_dbg(gpio->dev, "handler for IRQ %d on %s\n",
+				irqno, port->name);
+			irq_set_chip_and_handler(irqno, &u300_gpio_irqchip,
+						 handle_simple_irq);
+			set_irq_flags(irqno, IRQF_VALID);
+			irq_set_chip_data(irqno, port);
+		}
+
+		/* Turns off irq force (test register) for this port */
+		writel(0x0, gpio->base + portno * gpio->stride + ifr);
+
+		list_add_tail(&port->node, &gpio->port_list);
 	}
+	dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno);
+
+	err = gpiochip_add(&gpio->chip);
+	if (err) {
+		dev_err(gpio->dev, "unable to add gpiochip: %d\n", err);
+		goto err_no_chip;
+	}
+
+	platform_set_drvdata(pdev, gpio);
 
 	return 0;
 
- err_no_irq:
-	for (i = 0; i < num_irqs; i++)
-		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
-	iounmap(virtbase);
- err_no_ioremap:
-	release_mem_region(memres->start, resource_size(memres));
- err_no_ioregion:
- err_no_resource:
-	clk_disable(clk);
- err_no_clk_enable:
-	clk_put(clk);
- err_no_clk:
-	dev_info(gpiodev, "module ERROR:%d\n", err);
+err_no_chip:
+err_no_port:
+	u300_gpio_free_ports(gpio);
+err_unknown_variant:
+	iounmap(gpio->base);
+err_no_ioremap:
+	release_mem_region(gpio->memres->start, resource_size(gpio->memres));
+err_no_ioregion:
+err_no_resource:
+	clk_disable(gpio->clk);
+err_no_clk_enable:
+	clk_put(gpio->clk);
+err_no_clk:
+	kfree(gpio);
+	dev_info(&pdev->dev, "module ERROR:%d\n", err);
 	return err;
 }
 
-static int __exit gpio_remove(struct platform_device *pdev)
+static int __exit u300_gpio_remove(struct platform_device *pdev)
 {
-	int i;
+	struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+	struct u300_gpio *gpio = platform_get_drvdata(pdev);
+	int err;
 
 	/* Turn off the GPIO block */
-	writel(0x00000000U, virtbase + U300_GPIO_CR);
-	for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
-		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
-	iounmap(virtbase);
-	release_mem_region(memres->start, resource_size(memres));
-	clk_disable(clk);
-	clk_put(clk);
+	if (plat->variant == U300_GPIO_COH901335)
+		writel(0x00000000U, gpio->base + U300_335_CR);
+	if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+	    plat->variant == U300_GPIO_COH901571_3_BS365)
+		writel(0x00000000U, gpio->base + U300_571_CR);
+
+	err = gpiochip_remove(&gpio->chip);
+	if (err < 0) {
+		dev_err(gpio->dev, "unable to remove gpiochip: %d\n", err);
+		return err;
+	}
+	u300_gpio_free_ports(gpio);
+	iounmap(gpio->base);
+	release_mem_region(gpio->memres->start,
+			   resource_size(gpio->memres));
+	clk_disable(gpio->clk);
+	clk_put(gpio->clk);
+	platform_set_drvdata(pdev, NULL);
+	kfree(gpio);
 	return 0;
 }
 
-static struct platform_driver gpio_driver = {
+static struct platform_driver u300_gpio_driver = {
 	.driver		= {
 		.name	= "u300-gpio",
 	},
-	.remove		= __exit_p(gpio_remove),
+	.remove		= __exit_p(u300_gpio_remove),
 };
 
 
 static int __init u300_gpio_init(void)
 {
-	return platform_driver_probe(&gpio_driver, gpio_probe);
+	return platform_driver_probe(&u300_gpio_driver, u300_gpio_probe);
 }
 
 static void __exit u300_gpio_exit(void)
 {
-	platform_driver_unregister(&gpio_driver);
+	platform_driver_unregister(&u300_gpio_driver);
 }
 
 arch_initcall(u300_gpio_init);
 module_exit(u300_gpio_exit);
 
 MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-
-#ifdef U300_COH901571_3
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
-#endif
-
-#ifdef U300_COH901335
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
-#endif
-
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335/COH 901 571/3 GPIO driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 5d8aed5ec21b..c01e9519f6c1 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -35,7 +35,7 @@
 #include <linux/slab.h>
 
 #include <mach/hardware.h>	/* Pick up IXP2000-specific bits */
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
 
 static inline int ixp2000_scl_pin(void *data)
 {
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 000a78e5246c..6dede8f366c5 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -28,7 +28,7 @@
 #include <linux/platform_device.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/at91sam9_smc.h>
 
 #define DRV_NAME "at91_ide"
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 33d0bdc837c0..323bcdfff248 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -35,7 +35,7 @@
 #include <linux/mutex.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/keypad.h>
 #include <plat/menelaus.h>
 #include <asm/irq.h>
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 9cee8e7f0bcb..af5d9d061371 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -44,7 +44,7 @@
 
 #include <asm/mach/irq.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/menelaus.h>
 
 #define DRIVER_NAME			"menelaus"
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index a6c329040140..2dba999caf2c 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -33,7 +33,7 @@
 
 #include <plat/board.h>
 #include <plat/mmc.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/dma.h>
 #include <plat/mux.h>
 #include <plat/fpga.h>
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 18b0bd31de78..21b00cefae63 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -21,7 +21,9 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
+
+#include <mach/gpio-tegra.h>
 #include <mach/sdhci.h>
 
 #include "sdhci-pltfm.h"
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 78017eb9318e..9e6b498c9beb 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -26,7 +26,7 @@
 #include <asm/io.h>
 #include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/board-ams-delta.h>
 
 /*
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index a916dec29215..6a1d6d9a2df9 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -40,7 +40,7 @@
 #include <asm/mach/flash.h>
 #include <plat/gpmc.h>
 #include <plat/onenand.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #include <plat/dma.h>
 
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 29dc43523cec..48b4ec121f7f 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -35,7 +35,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/at91rm9200_emac.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/board.h>
 
 #include "at91_ether.h"
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index e956f659089a..66ab92cf3105 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -17,7 +17,7 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/vpac270.h>
 
 #include "soc_common.h"
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 82dee9a6c0de..d3bff424286f 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -22,7 +22,7 @@
 
 #include <asm/io.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/cpu.h>
 
 /* SPI register offsets */
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b922f5d2e61e..caba6730a943 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -46,7 +46,7 @@
 
 #ifdef CONFIG_ARM
 #include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #endif
 
 #define PDC_BUFFER_SIZE		512
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 653d6a60edb5..d1b41933199e 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -26,7 +26,7 @@
 
 #include <mach/platform.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #define USB_CTRL	IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
 
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 8bdf25a8b023..f9a3f62a83b5 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,7 +35,7 @@
 
 #include <mach/hardware.h>
 #include <mach/memory.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/cputype.h>
 
 #include <asm/mach-types.h>
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 817ab60f7537..dda920623c6a 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -21,7 +21,7 @@
 
 #include <mach/board.h>
 #include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #include <video/atmel_lcdc.h>
 
diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
index 10459d8bd9a0..4b24f549f9b9 100644
--- a/drivers/video/omap/lcd_apollon.c
+++ b/drivers/video/omap/lcd_apollon.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #include "omapfb.h"
 
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 8df688748b5a..622ad839fd9d 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/tps65010.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include "omapfb.h"
 
 #define MODULE_NAME	"omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 9fff86f67bde..12cc52a70f96 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include "omapfb.h"
 
 #define MODULE_NAME	"omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c
index 0f5952cae85e..062466402c0e 100644
--- a/drivers/video/omap/lcd_ldp.c
+++ b/drivers/video/omap/lcd_ldp.c
@@ -26,7 +26,7 @@
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/mux.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index b87e8b83f29c..6f8d13c41202 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -23,7 +23,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/mux.h>
 #include "omapfb.h"
 
diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c
index 564933ffac6e..b8fd5b2ec29c 100644
--- a/drivers/video/omap/lcd_overo.c
+++ b/drivers/video/omap/lcd_overo.c
@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/twl.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/mux.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
index ff0e6d7ab3a2..b51b332e5a2b 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -29,7 +29,7 @@ GPIO13 - screen blanking
 #include <linux/module.h>
 #include <linux/io.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include "omapfb.h"
 
 static int palmtt_panel_init(struct lcd_panel *panel,
diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c
index 5ec4f2d439c9..50e00395240f 100644
--- a/drivers/video/pnx4008/sdum.c
+++ b/drivers/video/pnx4008/sdum.c
@@ -30,7 +30,7 @@
 #include <linux/clk.h>
 #include <linux/gfp.h>
 #include <asm/uaccess.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #include "sdum.h"
 #include "fbcommon.h"