diff options
author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2019-06-12 21:59:08 +0200 |
---|---|---|
committer | Thierry Reding <thierry.reding@gmail.com> | 2019-06-26 11:39:10 +0200 |
commit | c375bcbaabdb92f0c007a044cda90450eef5ab43 (patch) | |
tree | c8277ee6344419db7213bc09cb3a30015457bf2e /drivers/pwm | |
parent | fb2081e870e9d59a0e6d076989e04c932c3ba23d (diff) |
pwm: meson: Read the full hardware state in meson_pwm_get_state()
Update the meson_pwm_get_state() implementation to take care of all
information in the registers instead of only reading the "enabled"
state.
The PWM output is only enabled if two conditions are met:
1. the per-channel clock is enabled
2. the PWM output is enabled
Calculate the PWM period and duty cycle using the reverse formula which
we already have in meson_pwm_calc() and update struct pwm_state with the
results.
As result of this /sys/kernel/debug/pwm now shows the PWM state set by
the bootloader (or firmware) after booting Linux.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Diffstat (limited to 'drivers/pwm')
-rw-r--r-- | drivers/pwm/pwm-meson.c | 52 |
1 files changed, 49 insertions, 3 deletions
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index 99815b26f6b2..fd40bb1e4207 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -287,19 +287,65 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, return 0; } +static unsigned int meson_pwm_cnt_to_ns(struct pwm_chip *chip, + struct pwm_device *pwm, u32 cnt) +{ + struct meson_pwm *meson = to_meson_pwm(chip); + struct meson_pwm_channel *channel; + unsigned long fin_freq; + u32 fin_ns; + + /* to_meson_pwm() can only be used after .get_state() is called */ + channel = &meson->channels[pwm->hwpwm]; + + fin_freq = clk_get_rate(channel->clk); + if (fin_freq == 0) + return 0; + + fin_ns = div_u64(NSEC_PER_SEC, fin_freq); + + return cnt * fin_ns * (channel->pre_div + 1); +} + static void meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state) { struct meson_pwm *meson = to_meson_pwm(chip); - u32 value, mask; + struct meson_pwm_channel_data *channel_data; + struct meson_pwm_channel *channel; + u32 value, tmp; if (!state) return; - mask = meson_pwm_per_channel_data[pwm->hwpwm].pwm_en_mask; + channel = &meson->channels[pwm->hwpwm]; + channel_data = &meson_pwm_per_channel_data[pwm->hwpwm]; value = readl(meson->base + REG_MISC_AB); - state->enabled = (value & mask) != 0; + + tmp = channel_data->pwm_en_mask | channel_data->clk_en_mask; + state->enabled = (value & tmp) == tmp; + + tmp = value >> channel_data->clk_div_shift; + channel->pre_div = FIELD_GET(MISC_CLK_DIV_MASK, tmp); + + value = readl(meson->base + channel_data->reg_offset); + + channel->lo = FIELD_GET(PWM_LOW_MASK, value); + channel->hi = FIELD_GET(PWM_HIGH_MASK, value); + + if (channel->lo == 0) { + state->period = meson_pwm_cnt_to_ns(chip, pwm, channel->hi); + state->duty_cycle = state->period; + } else if (channel->lo >= channel->hi) { + state->period = meson_pwm_cnt_to_ns(chip, pwm, + channel->lo + channel->hi); + state->duty_cycle = meson_pwm_cnt_to_ns(chip, pwm, + channel->hi); + } else { + state->period = 0; + state->duty_cycle = 0; + } } static const struct pwm_ops meson_pwm_ops = { |