Merge branches 'misc' and 'devel-stable' into for-linus

1 files changed, 86 insertions, 76 deletions

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 088b0a060876..4f7c6145e31f 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -151,6 +151,25 @@
 .L_\@:
 		.endm
 
+		/*
+		 * The kernel build system appends the size of the
+		 * decompressed kernel at the end of the compressed data
+		 * in little-endian form.
+		 */
+		.macro	get_inflated_image_size, res:req, tmp1:req, tmp2:req
+		adr	\res, .Linflated_image_size_offset
+		ldr	\tmp1, [\res]
+		add	\tmp1, \tmp1, \res	@ address of inflated image size
+
+		ldrb	\res, [\tmp1]		@ get_unaligned_le32
+		ldrb	\tmp2, [\tmp1, #1]
+		orr	\res, \res, \tmp2, lsl #8
+		ldrb	\tmp2, [\tmp1, #2]
+		ldrb	\tmp1, [\tmp1, #3]
+		orr	\res, \res, \tmp2, lsl #16
+		orr	\res, \res, \tmp1, lsl #24
+		.endm
+
 		.section ".start", "ax"
 /*
  * sort out different calling conventions
@@ -268,15 +287,15 @@ not_angel:
 		 */
 		mov	r0, pc
 		cmp	r0, r4
-		ldrcc	r0, LC0+32
+		ldrcc	r0, LC0+28
 		addcc	r0, r0, pc
 		cmpcc	r4, r0
 		orrcc	r4, r4, #1		@ remember we skipped cache_on
 		blcs	cache_on
 
 restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r6, r10, r11, r12}
-		ldr	sp, [r0, #28]
+		ldmia	r0, {r1, r2, r3, r6, r11, r12}
+		ldr	sp, [r0, #24]
 
 		/*
 		 * We might be running at a different address.  We need
@@ -284,20 +303,8 @@ restart:	adr	r0, LC0
 		 */
 		sub	r0, r0, r1		@ calculate the delta offset
 		add	r6, r6, r0		@ _edata
-		add	r10, r10, r0		@ inflated kernel size location
 
-		/*
-		 * The kernel build system appends the size of the
-		 * decompressed kernel at the end of the compressed data
-		 * in little-endian form.
-		 */
-		ldrb	r9, [r10, #0]
-		ldrb	lr, [r10, #1]
-		orr	r9, r9, lr, lsl #8
-		ldrb	lr, [r10, #2]
-		ldrb	r10, [r10, #3]
-		orr	r9, r9, lr, lsl #16
-		orr	r9, r9, r10, lsl #24
+		get_inflated_image_size	r9, r10, lr
 
 #ifndef CONFIG_ZBOOT_ROM
 		/* malloc space is above the relocated stack (64k max) */
@@ -521,11 +528,8 @@ dtb_check_done:
 		/* Preserve offset to relocated code. */
 		sub	r6, r9, r6
 
-#ifndef CONFIG_ZBOOT_ROM
-		/* cache_clean_flush may use the stack, so relocate it */
-		add	sp, sp, r6
-#endif
-
+		mov	r0, r9			@ start of relocated zImage
+		add	r1, sp, r6		@ end of relocated zImage
 		bl	cache_clean_flush
 
 		badr	r0, restart
@@ -622,6 +626,11 @@ not_relocated:	mov	r0, #0
 		add	r2, sp, #0x10000	@ 64k max
 		mov	r3, r7
 		bl	decompress_kernel
+
+		get_inflated_image_size	r1, r2, r3
+
+		mov	r0, r4			@ start of inflated image
+		add	r1, r1, r0		@ end of inflated image
 		bl	cache_clean_flush
 		bl	cache_off
 
@@ -652,13 +661,15 @@ LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
 		.word	_edata			@ r6
-		.word	input_data_end - 4	@ r10 (inflated size location)
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
 		.word	.L_user_stack_end	@ sp
 		.word	_end - restart + 16384 + 1024*1024
 		.size	LC0, . - LC0
 
+.Linflated_image_size_offset:
+		.long	(input_data_end - 4) - .
+
 #ifdef CONFIG_ARCH_RPC
 		.globl	params
 params:		ldr	r0, =0x10000100		@ params_phys for RPC
@@ -668,6 +679,24 @@ params:		ldr	r0, =0x10000100		@ params_phys for RPC
 #endif
 
 /*
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
+ */
+		.macro	dcache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+		movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		ldr	\tmp, [\tmp]
+#else
+		mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+#endif
+		lsr	\tmp, \tmp, #16
+		and	\tmp, \tmp, #0xf		@ cache line size encoding
+		mov	\reg, #4			@ bytes per word
+		mov	\reg, \reg, lsl \tmp		@ actual cache line size
+		.endm
+
+/*
  * Turn on the cache.  We need to setup some page tables so that we
  * can have both the I and D caches on.
  *
@@ -1159,8 +1188,6 @@ __armv7_mmu_cache_off:
 		bic	r0, r0, #0x000c
 #endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
-		mov	r12, lr
-		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
 #ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
@@ -1168,11 +1195,14 @@ __armv7_mmu_cache_off:
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-		mov	pc, r12
+		mov	pc, lr
 
 /*
  * Clean and flush the cache to maintain consistency.
  *
+ * On entry,
+ *  r0 = start address
+ *  r1 = end address (exclusive)
  * On exit,
  *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
@@ -1181,6 +1211,7 @@ __armv7_mmu_cache_off:
 		.align	5
 cache_clean_flush:
 		mov	r3, #16
+		mov	r11, r1
 		b	call_cache_fn
 
 __armv4_mpu_cache_flush:
@@ -1231,51 +1262,16 @@ __armv7_mmu_cache_flush:
 		mcr	p15, 0, r10, c7, c14, 0	@ clean+invalidate D
 		b	iflush
 hierarchical:
-		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r7, r9-r11}
-		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
-		ands	r3, r0, #0x7000000	@ extract loc from clidr
-		mov	r3, r3, lsr #23		@ left align loc bit field
-		beq	finished		@ if loc is 0, then no need to clean
-		mov	r10, #0			@ start clean at cache level 0
-loop1:
-		add	r2, r10, r10, lsr #1	@ work out 3x current cache level
-		mov	r1, r0, lsr r2		@ extract cache type bits from clidr
-		and	r1, r1, #7		@ mask of the bits for current cache only
-		cmp	r1, #2			@ see what cache we have at this level
-		blt	skip			@ skip if no cache, or just i-cache
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-		mcr	p15, 0, r10, c7, c5, 4	@ isb to sych the new cssr&csidr
-		mrc	p15, 1, r1, c0, c0, 0	@ read the new csidr
-		and	r2, r1, #7		@ extract the length of the cache lines
-		add	r2, r2, #4		@ add 4 (line length offset)
-		ldr	r4, =0x3ff
-		ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-		clz	r5, r4			@ find bit position of way size increment
-		ldr	r7, =0x7fff
-		ands	r7, r7, r1, lsr #13	@ extract max number of the index size
-loop2:
-		mov	r9, r4			@ create working copy of max way size
-loop3:
- ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
- ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
- THUMB(		lsl	r6, r9, r5		)
- THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
- THUMB(		lsl	r6, r7, r2		)
- THUMB(		orr	r11, r11, r6		) @ factor index number into r11
-		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
-		subs	r9, r9, #1		@ decrement the way
-		bge	loop3
-		subs	r7, r7, #1		@ decrement the index
-		bge	loop2
-skip:
-		add	r10, r10, #2		@ increment cache number
-		cmp	r3, r10
-		bgt	loop1
-finished:
-		ldmfd	sp!, {r0-r7, r9-r11}
-		mov	r10, #0			@ switch back to cache level 0
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
+		dcache_line_size r1, r2		@ r1 := dcache min line size
+		sub	r2, r1, #1		@ r2 := line size mask
+		bic	r0, r0, r2		@ round down start to line size
+		sub	r11, r11, #1		@ end address is exclusive
+		bic	r11, r11, r2		@ round down end to line size
+0:		cmp	r0, r11			@ finished?
+		bgt	iflush
+		mcr	p15, 0, r0, c7, c14, 1	@ Dcache clean/invalidate by VA
+		add	r0, r0, r1
+		b	0b
 iflush:
 		mcr	p15, 0, r10, c7, c10, 4	@ DSB
 		mcr	p15, 0, r10, c7, c5, 0	@ invalidate I+BTB
@@ -1460,7 +1456,24 @@ ENTRY(efi_stub_entry)
 
 		@ Preserve return value of efi_entry() in r4
 		mov	r4, r0
+		add	r1, r4, #SZ_2M			@ DT end
+		bl	cache_clean_flush
+
+		ldr	r0, [sp]			@ relocated zImage
+		ldr	r1, =_edata			@ size of zImage
+		add	r1, r1, r0			@ end of zImage
 		bl	cache_clean_flush
+
+		@ The PE/COFF loader might not have cleaned the code we are
+		@ running beyond the PoU, and so calling cache_off below from
+		@ inside the PE/COFF loader allocated region is unsafe. Let's
+		@ assume our own zImage relocation code did a better job, and
+		@ jump into its version of this routine before proceeding.
+		ldr	r0, [sp]			@ relocated zImage
+		ldr	r1, .Ljmp
+		sub	r1, r0, r1
+		mov	pc, r1				@ no mode switch
+0:
 		bl	cache_off
 
 		@ Set parameters for booting zImage according to boot protocol
@@ -1469,18 +1482,15 @@ ENTRY(efi_stub_entry)
 		mov	r0, #0
 		mov	r1, #0xFFFFFFFF
 		mov	r2, r4
-
-		@ Branch to (possibly) relocated zImage that is in [sp]
-		ldr	lr, [sp]
-		ldr	ip, =start_offset
-		add	lr, lr, ip
-		mov	pc, lr				@ no mode switch
+		b	__efi_start
 
 efi_load_fail:
 		@ Return EFI_LOAD_ERROR to EFI firmware on error.
 		ldr	r0, =0x80000001
 		ldmfd	sp!, {ip, pc}
 ENDPROC(efi_stub_entry)
+		.align	2
+.Ljmp:		.long	start - 0b
 #endif
 
 		.align