MIPS: WRPPMC: Move code one directory level up.

It was the last platform under gt64120 and will fit better into the new
platform makefile scheme, if moved.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

7 files changed, 0 insertions, 411 deletions

diff --git a/arch/mips/gt64120/wrppmc/Makefile b/arch/mips/gt64120/wrppmc/Makefile
deleted file mode 100644
index b49d282bee8a..000000000000
--- a/arch/mips/gt64120/wrppmc/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright 2006 Wind River System, Inc.
-# Author: Rongkai.Zhan <rongkai.zhan@windriver.com>
-#
-# Makefile for the Wind River MIPS 4KC PPMC Eval Board
-#
-
-obj-y += irq.o pci.o reset.o serial.o setup.o time.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/gt64120/wrppmc/irq.c b/arch/mips/gt64120/wrppmc/irq.c
deleted file mode 100644
index c6e706274db4..000000000000
--- a/arch/mips/gt64120/wrppmc/irq.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * irq.c: GT64120 Interrupt Controller
- *
- * Copyright (C) 2006, Wind River System Inc.
- * Author: Rongkai.Zhan, <rongkai.zhan@windriver.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/gt64120.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (pending & STATUSF_IP7)
-		do_IRQ(WRPPMC_MIPS_TIMER_IRQ);	/* CPU Compare/Count internal timer */
-	else if (pending & STATUSF_IP6)
-		do_IRQ(WRPPMC_UART16550_IRQ);	/* UART 16550 port */
-	else if (pending & STATUSF_IP3)
-		do_IRQ(WRPPMC_PCI_INTA_IRQ);	/* PCI INT_A */
-	else
-		spurious_interrupt();
-}
-
-/**
- * Initialize GT64120 Interrupt Controller
- */
-void gt64120_init_pic(void)
-{
-	/* clear CPU Interrupt Cause Registers */
-	GT_WRITE(GT_INTRCAUSE_OFS, (0x1F << 21));
-	GT_WRITE(GT_HINTRCAUSE_OFS, 0x00);
-
-	/* Disable all interrupts from GT64120 bridge chip */
-	GT_WRITE(GT_INTRMASK_OFS, 0x00);
-	GT_WRITE(GT_HINTRMASK_OFS, 0x00);
-	GT_WRITE(GT_PCI0_ICMASK_OFS, 0x00);
-	GT_WRITE(GT_PCI0_HICMASK_OFS, 0x00);
-}
-
-void __init arch_init_irq(void)
-{
-	/* IRQ 0 - 7 are for MIPS common irq_cpu controller */
-	mips_cpu_irq_init();
-
-	gt64120_init_pic();
-}
diff --git a/arch/mips/gt64120/wrppmc/pci.c b/arch/mips/gt64120/wrppmc/pci.c
deleted file mode 100644
index d06192faeb7c..000000000000
--- a/arch/mips/gt64120/wrppmc/pci.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * pci.c: GT64120 PCI support.
- *
- * Copyright (C) 2006, Wind River System Inc. Rongkai.Zhan <rongkai.zhan@windriver.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/gt64120.h>
-
-extern struct pci_ops gt64xxx_pci0_ops;
-
-static struct resource pci0_io_resource = {
-	.name  = "pci_0 io",
-	.start = GT_PCI_IO_BASE,
-	.end   = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1,
-	.flags = IORESOURCE_IO,
-};
-
-static struct resource pci0_mem_resource = {
-	.name  = "pci_0 memory",
-	.start = GT_PCI_MEM_BASE,
-	.end   = GT_PCI_MEM_BASE + GT_PCI_MEM_SIZE - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct pci_controller hose_0 = {
-	.pci_ops	= &gt64xxx_pci0_ops,
-	.io_resource	= &pci0_io_resource,
-	.mem_resource	= &pci0_mem_resource,
-};
-
-static int __init gt64120_pci_init(void)
-{
-	u32 tmp;
-
-	tmp = GT_READ(GT_PCI0_CMD_OFS);		/* Huh??? -- Ralf  */
-	tmp = GT_READ(GT_PCI0_BARE_OFS);
-
-	/* reset the whole PCI I/O space range */
-	ioport_resource.start = GT_PCI_IO_BASE;
-	ioport_resource.end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1;
-
-	register_pci_controller(&hose_0);
-	return 0;
-}
-
-arch_initcall(gt64120_pci_init);
diff --git a/arch/mips/gt64120/wrppmc/reset.c b/arch/mips/gt64120/wrppmc/reset.c
deleted file mode 100644
index cc5474b24f06..000000000000
--- a/arch/mips/gt64120/wrppmc/reset.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1997 Ralf Baechle
- */
-#include <linux/irqflags.h>
-#include <linux/kernel.h>
-
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/processor.h>
-
-void wrppmc_machine_restart(char *command)
-{
-	/*
-	 * Ouch, we're still alive ... This time we take the silver bullet ...
-	 * ... and find that we leave the hardware in a state in which the
-	 * kernel in the flush locks up somewhen during of after the PCI
-	 * detection stuff.
-	 */
-	local_irq_disable();
-	set_c0_status(ST0_BEV | ST0_ERL);
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	flush_cache_all();
-	write_c0_wired(0);
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void wrppmc_machine_halt(void)
-{
-	local_irq_disable();
-
-	printk(KERN_NOTICE "You can safely turn off the power\n");
-	while (1) {
-		if (cpu_wait)
-			cpu_wait();
-	}
-}
diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c
deleted file mode 100644
index 6f9d0858f596..000000000000
--- a/arch/mips/gt64120/wrppmc/serial.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *  Registration of WRPPMC UART platform device.
- *
- *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/gt64120.h>
-
-static struct resource wrppmc_uart_resource[] __initdata = {
-	{
-		.start	= WRPPMC_UART16550_BASE,
-		.end	= WRPPMC_UART16550_BASE + 7,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= WRPPMC_UART16550_IRQ,
-		.end	= WRPPMC_UART16550_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct plat_serial8250_port wrppmc_serial8250_port[] = {
-	{
-		.irq		= WRPPMC_UART16550_IRQ,
-		.uartclk	= WRPPMC_UART16550_CLOCK,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_IOREMAP | UPF_SKIP_TEST,
-		.mapbase	= WRPPMC_UART16550_BASE,
-	},
-	{},
-};
-
-static __init int wrppmc_uart_add(void)
-{
-	struct platform_device *pdev;
-	int retval;
-
-	pdev = platform_device_alloc("serial8250", -1);
-	if (!pdev)
-		return -ENOMEM;
-
-	pdev->id = PLAT8250_DEV_PLATFORM;
-	pdev->dev.platform_data = wrppmc_serial8250_port;
-
-	retval = platform_device_add_resources(pdev, wrppmc_uart_resource,
-					ARRAY_SIZE(wrppmc_uart_resource));
-	if (retval)
-		goto err_free_device;
-
-	retval = platform_device_add(pdev);
-	if (retval)
-		goto err_free_device;
-
-	return 0;
-
-err_free_device:
-	platform_device_put(pdev);
-
-	return retval;
-}
-device_initcall(wrppmc_uart_add);
diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c
deleted file mode 100644
index ca65c84031a7..000000000000
--- a/arch/mips/gt64120/wrppmc/setup.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * setup.c: Setup pointers to hardware dependent routines.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2006, Wind River System Inc. Rongkai.zhan <rongkai.zhan@windriver.com>
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/pm.h>
-
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/gt64120.h>
-
-unsigned long gt64120_base = KSEG1ADDR(0x14000000);
-
-#ifdef WRPPMC_EARLY_DEBUG
-
-static volatile unsigned char * wrppmc_led = \
-	(volatile unsigned char *)KSEG1ADDR(WRPPMC_LED_BASE);
-
-/*
- * PPMC LED control register:
- * -) bit[0] controls DS1 LED (1 - OFF, 0 - ON)
- * -) bit[1] controls DS2 LED (1 - OFF, 0 - ON)
- * -) bit[2] controls DS4 LED (1 - OFF, 0 - ON)
- */
-void wrppmc_led_on(int mask)
-{
-	unsigned char value = *wrppmc_led;
-
-	value &= (0xF8 | mask);
-	*wrppmc_led = value;
-}
-
-/* If mask = 0, turn off all LEDs */
-void wrppmc_led_off(int mask)
-{
-	unsigned char value = *wrppmc_led;
-
-	value |= (0x7 & mask);
-	*wrppmc_led = value;
-}
-
-/*
- * We assume that bootloader has initialized UART16550 correctly
- */
-void __init wrppmc_early_putc(char ch)
-{
-	static volatile unsigned char *wrppmc_uart = \
-		(volatile unsigned char *)KSEG1ADDR(WRPPMC_UART16550_BASE);
-	unsigned char value;
-
-	/* Wait until Transmit-Holding-Register is empty */
-	while (1) {
-		value = *(wrppmc_uart + 5);
-		if (value & 0x20)
-			break;
-	}
-
-	*wrppmc_uart = ch;
-}
-
-void __init wrppmc_early_printk(const char *fmt, ...)
-{
-	static char pbuf[256] = {'\0', };
-	char *ch = pbuf;
-	va_list args;
-	unsigned int i;
-
-	memset(pbuf, 0, 256);
-	va_start(args, fmt);
-	i = vsprintf(pbuf, fmt, args);
-	va_end(args);
-
-	/* Print the string */
-	while (*ch != '\0') {
-		wrppmc_early_putc(*ch);
-		/* if print '\n', also print '\r' */
-		if (*ch++ == '\n')
-			wrppmc_early_putc('\r');
-	}
-}
-#endif /* WRPPMC_EARLY_DEBUG */
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-void __init plat_mem_setup(void)
-{
-	extern void wrppmc_machine_restart(char *command);
-	extern void wrppmc_machine_halt(void);
-
-	_machine_restart = wrppmc_machine_restart;
-	_machine_halt	 = wrppmc_machine_halt;
-	pm_power_off	 = wrppmc_machine_halt;
-
-	/* This makes the operations of 'in/out[bwl]' to the
-	 * physical address ( < KSEG0) can work via KSEG1
-	 */
-	set_io_port_base(KSEG1);
-}
-
-const char *get_system_type(void)
-{
-	return "Wind River PPMC (GT64120)";
-}
-
-/*
- * Initializes basic routines and structures pointers, memory size (as
- * given by the bios and saves the command line.
- */
-void __init prom_init(void)
-{
-	add_memory_region(WRPPMC_SDRAM_SCS0_BASE, WRPPMC_SDRAM_SCS0_SIZE, BOOT_MEM_RAM);
-	add_memory_region(WRPPMC_BOOTROM_BASE, WRPPMC_BOOTROM_SIZE, BOOT_MEM_ROM_DATA);
-
-	wrppmc_early_printk("prom_init: GT64120 SDRAM Bank 0: 0x%x - 0x%08lx\n",
-			WRPPMC_SDRAM_SCS0_BASE, (WRPPMC_SDRAM_SCS0_BASE + WRPPMC_SDRAM_SCS0_SIZE));
-}
diff --git a/arch/mips/gt64120/wrppmc/time.c b/arch/mips/gt64120/wrppmc/time.c
deleted file mode 100644
index 668dbd5f12c5..000000000000
--- a/arch/mips/gt64120/wrppmc/time.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * time.c: MIPS CPU Count/Compare timer hookup
- *
- * Author: Mark.Zhan, <rongkai.zhan@windriver.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2006, Wind River System Inc.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/gt64120.h>
-#include <asm/time.h>
-
-#define WRPPMC_CPU_CLK_FREQ 40000000 /* 40MHZ */
-
-/*
- * Estimate CPU frequency.  Sets mips_hpt_frequency as a side-effect
- *
- * NOTE: We disable all GT64120 timers, and use MIPS processor internal
- * timer as the source of kernel clock tick.
- */
-void __init plat_time_init(void)
-{
-	/* Disable GT64120 timers */
-	GT_WRITE(GT_TC_CONTROL_OFS, 0x00);
-	GT_WRITE(GT_TC0_OFS, 0x00);
-	GT_WRITE(GT_TC1_OFS, 0x00);
-	GT_WRITE(GT_TC2_OFS, 0x00);
-	GT_WRITE(GT_TC3_OFS, 0x00);
-
-	/* Use MIPS compare/count internal timer */
-	mips_hpt_frequency = WRPPMC_CPU_CLK_FREQ;
-}