Merge tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ata updates from Damien Le Moal:

 - Print the timeout value for internal command failures due to a
   timeout (from Tomas)

 - Improve parameter names in ata_dev_set_feature() to clarify this
   function use (from Niklas)

 - Improve the ahci driver low power mode setting initialization to
   allow more flexibility for the user (from Rafael)

 - Several patches to remove redundant variables in libata-core,
   libata-eh and the pata_macio driver and to fix typos in comments
   (from Jinpeng, Shaomin, Ye)

 - Some code simplifications and macro renaming (for clarity) in various
   functions of libata-core (from me)

 - Add a missing check for a potential failure of sata_scr_read() in
   sata_print_link_status() (from Li)

 - Cleanup of libata Kconfig PATA_PLATFORM and PATA_OF_PLATFORM options
   (from Lukas)

 - Cleanups of ata dt-bindings and improvements of libahci_platform,
   ahci and libahci code (from Serge)

 - New driver for Synopsys AHCI SATA controllers, based of the generic
   ahci code (from Serge). One compilation warning fix is added for this
   driver (from me)

 - Several fixes to macros used to discover a drive capabilities to be
   consistent with the ACS specifications (from Niklas)

 - A couple of simplifcations to some libata functions, removing
   unnecessary arguments (from Niklas)

 - An improvements to libata-eh code to avoid unnecessary link reset
   when revalidating a drive after a failed command. In practice, this
   extra, unneeded reset, reset does not cause any arm beyond slightly
   slowing down error recovery (from Niklas)

* tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (45 commits)
  ata: libata-eh: avoid needless hard reset when revalidating link
  ata: libata: drop superfluous ata_eh_analyze_tf() parameter
  ata: libata: drop superfluous ata_eh_request_sense() parameter
  ata: fix ata_id_has_dipm()
  ata: fix ata_id_has_ncq_autosense()
  ata: fix ata_id_has_devslp()
  ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
  ata: libata-eh: Remove the unneeded result variable
  ata: ahci_st: Enable compile test
  ata: ahci_st: Fix compilation warning
  MAINTAINERS: Add maintainers for DWC AHCI SATA driver
  ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support
  ata: ahci-dwc: Add platform-specific quirks support
  dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema
  ata: ahci: Add DWC AHCI SATA controller support
  ata: libahci_platform: Add function returning a clock-handle by id
  dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema
  ata: ahci: Introduce firmware-specific caps initialization
  ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments
  ata: libahci: Don't read AHCI version twice in the save-config method
  ...

7 files changed, 446 insertions, 82 deletions

diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
new file mode 100644
index 000000000000..94d72aeaad0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial ATA AHCI controllers
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Damien Le Moal <damien.lemoal@opensource.wdc.com>
+
+description:
+  This document defines device tree properties for a common AHCI SATA
+  controller implementation. It's hardware interface is supposed to
+  conform to the technical standard defined by Intel (see Serial ATA
+  Advanced Host Controller Interface specification for details). The
+  document doesn't constitute a DT-node binding by itself but merely
+  defines a set of common properties for the AHCI-compatible devices.
+
+select: false
+
+allOf:
+  - $ref: sata-common.yaml#
+
+properties:
+  reg:
+    description:
+      Generic AHCI registers space conforming to the Serial ATA AHCI
+      specification.
+
+  reg-names:
+    description: CSR space IDs
+    contains:
+      const: ahci
+
+  interrupts:
+    description:
+      Generic AHCI state change interrupt. Can be implemented either as a
+      single line attached to the controller or as a set of the signals
+      indicating the particular port events.
+    minItems: 1
+    maxItems: 32
+
+  ahci-supply:
+    description: Power regulator for AHCI controller
+
+  target-supply:
+    description: Power regulator for SATA target device
+
+  phy-supply:
+    description: Power regulator for SATA PHY
+
+  phys:
+    description: Reference to the SATA PHY node
+    maxItems: 1
+
+  phy-names:
+    const: sata-phy
+
+  hba-cap:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description:
+      Bitfield of the HBA generic platform capabilities like Staggered
+      Spin-up or Mechanical Presence Switch support. It can be used to
+      appropriately initialize the HWinit fields of the HBA CAP register
+      in case if the system firmware hasn't done it.
+
+  ports-implemented:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description:
+      Mask that indicates which ports the HBA supports. Useful if PI is not
+      programmed by the BIOS, which is true for some embedded SoC's.
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: '#/$defs/ahci-port'
+    description:
+      It is optionally possible to describe the ports as sub-nodes so
+      to enable each port independently when dealing with multiple PHYs.
+
+required:
+  - reg
+  - interrupts
+
+additionalProperties: true
+
+$defs:
+  ahci-port:
+    $ref: /schemas/ata/sata-common.yaml#/$defs/sata-port
+
+    properties:
+      reg:
+        description:
+          AHCI SATA port identifier. By design AHCI controller can't have
+          more than 32 ports due to the CAP.NP fields and PI register size
+          constraints.
+        minimum: 0
+        maximum: 31
+
+      phys:
+        description: Individual AHCI SATA port PHY
+        maxItems: 1
+
+      phy-names:
+        description: AHCI SATA port PHY ID
+        const: sata-phy
+
+      target-supply:
+        description: Power regulator for SATA port target device
+
+      hba-port-cap:
+        $ref: '/schemas/types.yaml#/definitions/uint32'
+        description:
+          Bitfield of the HBA port-specific platform capabilities like Hot
+          plugging, eSATA, FIS-based Switching, etc (see AHCI specification
+          for details). It can be used to initialize the HWinit fields of
+          the PxCMD register in case if the system firmware hasn't done it.
+
+    required:
+      - reg
+
+...
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
index c146ab8e14e5..7dc2a2e8f598 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -30,14 +30,11 @@ select:
           - marvell,armada-3700-ahci
           - marvell,armada-8k-ahci
           - marvell,berlin2q-ahci
-          - snps,dwc-ahci
-          - snps,spear-ahci
   required:
     - compatible
 
 allOf:
-  - $ref: "sata-common.yaml#"
-
+  - $ref: "ahci-common.yaml#"
 
 properties:
   compatible:
@@ -49,17 +46,11 @@ properties:
               - marvell,berlin2-ahci
               - marvell,berlin2q-ahci
           - const: generic-ahci
-      - items:
-          - enum:
-              - rockchip,rk3568-dwc-ahci
-          - const: snps,dwc-ahci
       - enum:
           - cavium,octeon-7130-ahci
           - hisilicon,hisi-ahci
           - ibm,476gtr-ahci
           - marvell,armada-3700-ahci
-          - snps,dwc-ahci
-          - snps,spear-ahci
 
   reg:
     minItems: 1
@@ -69,92 +60,37 @@ properties:
     maxItems: 1
 
   clocks:
-    description:
-      Clock IDs array as required by the controller.
     minItems: 1
     maxItems: 3
 
   clock-names:
-    description:
-      Names of clocks corresponding to IDs in the clock property.
     minItems: 1
     maxItems: 3
 
   interrupts:
     maxItems: 1
 
-  ahci-supply:
-    description:
-      regulator for AHCI controller
-
-  dma-coherent: true
-
-  phy-supply:
-    description:
-      regulator for PHY power
-
-  phys:
-    description:
-      List of all PHYs on this controller
-    maxItems: 1
-
-  phy-names:
-    description:
-      Name specifier for the PHYs
-    maxItems: 1
-
-  ports-implemented:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
-    description: |
-      Mask that indicates which ports that the HBA supports
-      are available for software to use. Useful if PORTS_IMPL
-      is not programmed by the BIOS, which is true with
-      some embedded SoCs.
-    maximum: 0x1f
-
   power-domains:
     maxItems: 1
 
   resets:
     maxItems: 1
 
-  target-supply:
-    description:
-      regulator for SATA target power
-
-required:
-  - compatible
-  - reg
-  - interrupts
-
 patternProperties:
   "^sata-port@[0-9a-f]+$":
-    type: object
-    additionalProperties: false
-    description:
-      Subnode with configuration of the Ports.
-
-    properties:
-      reg:
-        maxItems: 1
-
-      phys:
-        maxItems: 1
-
-      phy-names:
-        maxItems: 1
-
-      target-supply:
-        description:
-          regulator for SATA target power
-
-    required:
-      - reg
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
 
     anyOf:
       - required: [ phys ]
       - required: [ target-supply ]
 
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
 unevaluatedProperties: false
 
 examples:
@@ -167,6 +103,8 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/berlin2q.h>
+    #include <dt-bindings/ata/ahci.h>
+
     sata@f7e90000 {
         compatible = "marvell,berlin2q-ahci", "generic-ahci";
         reg = <0xf7e90000 0x1000>;
@@ -175,15 +113,23 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
+        hba-cap = <HBA_SMPS>;
+
         sata0: sata-port@0 {
             reg = <0>;
+
             phys = <&sata_phy 0>;
             target-supply = <&reg_sata0>;
+
+            hba-port-cap = <(HBA_PORT_FBSCP | HBA_PORT_ESP)>;
         };
 
         sata1: sata-port@1 {
             reg = <1>;
+
             phys = <&sata_phy 1>;
             target-supply = <&reg_sata1>;
+
+            hba-port-cap = <(HBA_PORT_HPCP | HBA_PORT_MPSP | HBA_PORT_FBSCP)>;
         };
     };
diff --git a/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
new file mode 100644
index 000000000000..9b7ca4759bd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/baikal,bt1-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 SoC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  AHCI SATA controller embedded into the Baikal-T1 SoC is based on the
+  DWC AHCI SATA v4.10a IP-core.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-ahci
+
+  clocks:
+    items:
+      - description: Peripheral APB bus clock
+      - description: Application AXI BIU clock
+      - description: SATA Ports reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk
+      - const: ref
+
+  resets:
+    items:
+      - description: Application AXI BIU domain reset
+      - description: SATA Ports clock domain reset
+
+  reset-names:
+    items:
+      - const: arst
+      - const: ref
+
+  ports-implemented:
+    maximum: 0x3
+
+patternProperties:
+  "^sata-port@[0-1]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Tx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Rx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@1f050000 {
+      compatible = "baikal,bt1-ahci";
+      reg = <0x1f050000 0x2000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <0 64 4>;
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 2>, <&sata_ref_clk>;
+      clock-names = "pclk", "aclk", "ref";
+
+      resets = <&ccu_axi 2>, <&ccu_sys 0>;
+      reset-names = "arst", "ref";
+
+      ports-implemented = <0x3>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+
+      sata-port@1 {
+        reg = <1>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
index 235a93ac86b0..fa8ebc8f243f 100644
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
@@ -14,7 +14,7 @@ maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
 
 allOf:
-  - $ref: sata-common.yaml#
+  - $ref: ahci-common.yaml#
 
 properties:
   compatible:
@@ -41,8 +41,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  dma-coherent: true
-
 if:
   properties:
     compatible:
diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml
index 7ac77b1c5850..58c9342b9925 100644
--- a/Documentation/devicetree/bindings/ata/sata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
@@ -31,22 +31,27 @@ properties:
   "#size-cells":
     const: 0
 
+  dma-coherent: true
+
 patternProperties:
   "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/sata-port'
     description: |
       DT nodes for ports connected on the SATA host. The SATA port
       nodes will be named "sata-port".
+
+additionalProperties: true
+
+$defs:
+  sata-port:
     type: object
 
     properties:
       reg:
         minimum: 0
-        maximum: 14
         description:
-          The ID number of the drive port SATA can potentially use a port
-          multiplier making it possible to connect up to 15 disks to a single
-          SATA port.
-
-additionalProperties: true
+          The ID number of the SATA port. Aside with being directly used,
+          each port can have a Port Multiplier attached thus allowing to
+          access more than one drive by means of a single SATA port.
 
 ...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
new file mode 100644
index 000000000000..c1457910520b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller properties
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree schema for the generic Synopsys DWC
+  AHCI controller properties.
+
+select: false
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock,
+      PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
+      clock, etc.
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application APB/AHB/AXI BIU clock
+          enum:
+            - pclk
+            - aclk
+            - hclk
+            - sata
+        - description: Power Module keep-alive clock
+          const: pmalive
+        - description: RxOOB detection clock
+          const: rxoob
+        - description: SATA Ports reference clock
+          const: ref
+
+  resets:
+    description:
+      At least basic application and reference clock domains resets are
+      normally supported by the DWC AHCI SATA controller.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application AHB/AXI BIU clock domain reset control
+          enum:
+            - arst
+            - hrst
+        - description: Power Module keep-alive clock domain reset control
+          const: pmalive
+        - description: RxOOB detection clock domain reset control
+          const: rxoob
+        - description: Reference clock domain reset control
+          const: ref
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/dwc-ahci-port'
+
+additionalProperties: true
+
+$defs:
+  dwc-ahci-port:
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Tx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Rx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
new file mode 100644
index 000000000000..5afa4b57ce20
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the generic Synopsys DWC
+  implementation of the AHCI SATA controller.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Synopsys AHCI SATA-compatible devices
+        const: snps,dwc-ahci
+      - description: SPEAr1340 AHCI SATA device
+        const: snps,spear-ahci
+      - description: Rockhip RK3568 AHCI controller
+        items:
+          - const: rockchip,rk3568-dwc-ahci
+          - const: snps,dwc-ahci
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@122f0000 {
+      compatible = "snps,dwc-ahci";
+      reg = <0x122F0000 0x1ff>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&clock1>, <&clock2>;
+      clock-names = "aclk", "ref";
+
+      phys = <&sata_phy>;
+      phy-names = "sata-phy";
+
+      ports-implemented = <0x1>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        hba-port-cap = <HBA_PORT_FBSCP>;
+
+        snps,tx-ts-max = <512>;
+        snps,rx-ts-max = <512>;
+      };
+    };
+
+...