summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorVladimir Oltean <vladimir.oltean@nxp.com>2021-05-20 16:12:38 +0300
committerMark Brown <broonie@kernel.org>2021-05-21 13:13:33 +0100
commitb4e46c9954ad55092502e1e8c44ceb9b6744bade (patch)
tree0c0482213ecb626f3d53fd2d963ecf5b094b452f
parentbda7db1d952c3ff7c24c11bc295aa72aaeb98451 (diff)
spi: sc18is602: implement .max_{transfer,message}_size() for the controller
Allow SPI peripherals attached to this controller to know what is the maximum transfer size and message size, so they can limit their transfer lengths properly in case they are otherwise capable of larger transfer sizes. For the sc18is602, this is 200 bytes in both cases, since as far as I understand, it isn't possible to tell the controller to keep the chip select asserted after the STOP command is sent. The controller can support SPI messages larger than 200 bytes if cs_change is set for individual transfers such that the portions with chip select asserted are never longer than 200 bytes. What is not supported is just SPI messages with a continuous chip select larger than 200. I don't think it is possible to express this using the current API, so drivers which do send SPI messages with cs_change can safely just look at the max_transfer_size limit. An example of user for this is sja1105_xfer() in drivers/net/dsa/sja1105/sja1105_spi.c which sends by default 64 * 4 = 256 byte transfers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210520131238.2903024-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
-rw-r--r--drivers/spi/spi-sc18is602.c7
1 files changed, 7 insertions, 0 deletions
diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c
index 37871edc7962..5d27ee482237 100644
--- a/drivers/spi/spi-sc18is602.c
+++ b/drivers/spi/spi-sc18is602.c
@@ -219,6 +219,11 @@ static int sc18is602_transfer_one(struct spi_master *master,
return status;
}
+static size_t sc18is602_max_transfer_size(struct spi_device *spi)
+{
+ return SC18IS602_BUFSIZ;
+}
+
static int sc18is602_setup(struct spi_device *spi)
{
struct sc18is602 *hw = spi_master_get_devdata(spi->master);
@@ -293,6 +298,8 @@ static int sc18is602_probe(struct i2c_client *client,
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->setup = sc18is602_setup;
master->transfer_one_message = sc18is602_transfer_one;
+ master->max_transfer_size = sc18is602_max_transfer_size;
+ master->max_message_size = sc18is602_max_transfer_size;
master->dev.of_node = np;
master->min_speed_hz = hw->freq / 128;
master->max_speed_hz = hw->freq / 4;