/* * net/tipc/eth_media.c: Ethernet bearer support for TIPC * * Copyright (c) 2001-2007, Ericsson AB * Copyright (c) 2005-2008, 2011, Wind River Systems * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the names of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include "core.h" #include "bearer.h" #define MAX_ETH_BEARERS MAX_BEARERS #define ETH_ADDR_OFFSET 4 /* message header offset of MAC address */ /** * struct eth_bearer - Ethernet bearer data structure * @bearer: ptr to associated "generic" bearer structure * @dev: ptr to associated Ethernet network device * @tipc_packet_type: used in binding TIPC to Ethernet driver * @cleanup: work item used when disabling bearer */ struct eth_bearer { struct tipc_bearer *bearer; struct net_device *dev; struct packet_type tipc_packet_type; struct work_struct cleanup; }; static struct media eth_media_info; static struct eth_bearer eth_bearers[MAX_ETH_BEARERS]; static int eth_started; static struct notifier_block notifier; /** * eth_media_addr_set - initialize Ethernet media address structure * * Media-dependent "value" field stores MAC address in first 6 bytes * and zeroes out the remaining bytes. */ static void eth_media_addr_set(struct tipc_media_addr *a, char *mac) { memcpy(a->value, mac, ETH_ALEN); memset(a->value + ETH_ALEN, 0, sizeof(a->value) - ETH_ALEN); a->media_id = TIPC_MEDIA_TYPE_ETH; a->broadcast = !memcmp(mac, eth_media_info.bcast_addr.value, ETH_ALEN); } /** * send_msg - send a TIPC message out over an Ethernet interface */ static int send_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr, struct tipc_media_addr *dest) { struct sk_buff *clone; struct net_device *dev; int delta; clone = skb_clone(buf, GFP_ATOMIC); if (!clone) return 0; dev = ((struct eth_bearer *)(tb_ptr->usr_handle))->dev; delta = dev->hard_header_len - skb_headroom(buf); if ((delta > 0) && pskb_expand_head(clone, SKB_DATA_ALIGN(delta), 0, GFP_ATOMIC)) { kfree_skb(clone); return 0; } skb_reset_network_header(clone); clone->dev = dev; dev_hard_header(clone, dev, ETH_P_TIPC, dest->value, dev->dev_addr, clone->len); dev_queue_xmit(clone); return 0; } /** * recv_msg - handle incoming TIPC message from an Ethernet interface * * Accept only packets explicitly sent to this node, or broadcast packets; * ignores packets sent using Ethernet multicast, and traffic sent to other * nodes (which can happen if interface is running in promiscuous mode). */ static int recv_msg(struct sk_buff *buf, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev) { struct eth_bearer *eb_ptr = (struct eth_bearer *)pt->af_packet_priv; if (!net_eq(dev_net(dev), &init_net)) { kfree_skb(buf); return 0; } if (likely(eb_ptr->bearer)) { if (likely(buf->pkt_type <= PACKET_BROADCAST)) { buf->next = NULL; tipc_recv_msg(buf, eb_ptr->bearer); return 0; } } kfree_skb(buf); return 0; } /** * enable_bearer - attach TIPC bearer to an Ethernet interface */ static int enable_bearer(struct tipc_bearer *tb_ptr) { struct net_device *dev = NULL; struct net_device *pdev = NULL; struct eth_bearer *eb_ptr = ð_bearers[0]; struct eth_bearer *stop = ð_bearers[MAX_ETH_BEARERS]; char *driver_name = strchr((const char *)tb_ptr->name, ':') + 1; int pending_dev = 0; /* Find unused Ethernet bearer structure */ while (eb_ptr->dev) { if (!eb_ptr->bearer) pending_dev++; if (++eb_ptr == stop) return pending_dev ? -EAGAIN : -EDQUOT; } /* Find device with specified name */ read_lock(&dev_base_lock); for_each_netdev(&init_net, pdev) { if (!strncmp(pdev->name, driver_name, IFNAMSIZ)) { dev = pdev; dev_hold(dev); break; } } read_unlock(&dev_base_lock); if (!dev) return -ENODEV; /* Create Ethernet bearer for device */ eb_ptr->dev = dev; eb_ptr->tipc_packet_type.type = htons(ETH_P_TIPC); eb_ptr->tipc_packet_type.dev = dev; eb_ptr->tipc_packet_type.func = recv_msg; eb_ptr->tipc_packet_type.af_packet_priv = eb_ptr; INIT_LIST_HEAD(&(eb_ptr->tipc_packet_type.list)); dev_add_pack(&eb_ptr->tipc_packet_type); /* Associate TIPC bearer with Ethernet bearer */ eb_ptr->bearer = tb_ptr; tb_ptr->usr_handle = (void *)eb_ptr; tb_ptr->mtu = dev->mtu; tb_ptr->blocked = 0; eth_media_addr_set(&tb_ptr->addr, (char *)dev->dev_addr); return 0; } /** * cleanup_bearer - break association between Ethernet bearer and interface * * This routine must be invoked from a work queue because it can sleep. */ static void cleanup_bearer(struct work_struct *work) { struct eth_bearer *eb_ptr = container_of(work, struct eth_bearer, cleanup); dev_remove_pack(&eb_ptr->tipc_packet_type); dev_put(eb_ptr->dev); eb_ptr->dev = NULL; } /** * disable_bearer - detach TIPC bearer from an Ethernet interface * * Mark Ethernet bearer as inactive so that incoming buffers are thrown away, * then get worker thread to complete bearer cleanup. (Can't do cleanup * here because cleanup code needs to sleep and caller holds spinlocks.) */ static void disable_bearer(struct tipc_bearer *tb_ptr) { struct eth_bearer *eb_ptr = (struct eth_bearer *)tb_ptr->usr_handle; eb_ptr->bearer = NULL; INIT_WORK(&eb_ptr->cleanup, cleanup_bearer); schedule_work(&eb_ptr->cleanup); } /** * recv_notification - handle device updates from OS * * Change the state of the Ethernet bearer (if any) associated with the * specified device. */ static int recv_notification(struct notifier_block *nb, unsigned long evt, void *dv) { struct net_device *dev = (struct net_device *)dv; struct eth_bearer *eb_ptr = ð_bearers[0]; struct eth_bearer *stop = ð_bearers[MAX_ETH_BEARERS]; if (!net_eq(dev_net(dev), &init_net)) return NOTIFY_DONE; while ((eb_ptr->dev != dev)) { if (++eb_ptr == stop) return NOTIFY_DONE; /* couldn't find device */ } if (!eb_ptr->bearer) return NOTIFY_DONE; /* bearer had been disabled */ eb_ptr->bearer->mtu = dev->mtu; switch (evt) { case NETDEV_CHANGE: if (netif_carrier_ok(dev)) tipc_continue(eb_ptr->bearer); else tipc_block_bearer(eb_ptr->bearer->name); break; case NETDEV_UP: tipc_continue(eb_ptr->bearer); break; case NETDEV_DOWN: tipc_block_bearer(eb_ptr->bearer->name); break; case NETDEV_CHANGEMTU: case NETDEV_CHANGEADDR: tipc_block_bearer(eb_ptr->bearer->name); tipc_continue(eb_ptr->bearer); break; case NETDEV_UNREGISTER: case NETDEV_CHANGENAME: tipc_disable_bearer(eb_ptr->bearer->name); break; } return NOTIFY_OK; } /** * eth_addr2str - convert Ethernet address to string */ static int eth_addr2str(struct tipc_media_addr *a, char *str_buf, int str_size) { if (str_size < 18) /* 18 = strlen("aa:bb:cc:dd:ee:ff\0") */ return 1; sprintf(str_buf, "%pM", a->value); return 0; } /** * eth_str2addr - convert string to Ethernet address */ static int eth_str2addr(struct tipc_media_addr *a, char *str_buf) { char mac[ETH_ALEN]; int r; r = sscanf(str_buf, "%02x:%02x:%02x:%02x:%02x:%02x", (u32 *)&mac[0], (u32 *)&mac[1], (u32 *)&mac[2], (u32 *)&mac[3], (u32 *)&mac[4], (u32 *)&mac[5]); if (r != ETH_ALEN) return 1; eth_media_addr_set(a, mac); return 0; } /** * eth_str2addr - convert Ethernet address format to message header format */ static int eth_addr2msg(struct tipc_media_addr *a, char *msg_area) { memset(msg_area, 0, TIPC_MEDIA_ADDR_SIZE); msg_area[TIPC_MEDIA_TYPE_OFFSET] = TIPC_MEDIA_TYPE_ETH; memcpy(msg_area + ETH_ADDR_OFFSET, a->value, ETH_ALEN); return 0; } /** * eth_str2addr - convert message header address format to Ethernet format */ static int eth_msg2addr(struct tipc_media_addr *a, char *msg_area) { if (msg_area[TIPC_MEDIA_TYPE_OFFSET] != TIPC_MEDIA_TYPE_ETH) return 1; eth_media_addr_set(a, msg_area + ETH_ADDR_OFFSET); return 0; } /* * Ethernet media registration info */ static struct media eth_media_info = { .send_msg = send_msg, .enable_bearer = enable_bearer, .disable_bearer = disable_bearer, .addr2str = eth_addr2str, .str2addr = eth_str2addr, .addr2msg = eth_addr2msg, .msg2addr = eth_msg2addr, .bcast_addr = { { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, TIPC_MEDIA_TYPE_ETH, 1 }, .priority = TIPC_DEF_LINK_PRI, .tolerance = TIPC_DEF_LINK_TOL, .window = TIPC_DEF_LINK_WIN, .type_id = TIPC_MEDIA_TYPE_ETH, .name = "eth" }; /** * tipc_eth_media_start - activate Ethernet bearer support * * Register Ethernet media type with TIPC bearer code. Also register * with OS for notifications about device state changes. */ int tipc_eth_media_start(void) { int res; if (eth_started) return -EINVAL; res = tipc_register_media(ð_media_info); if (res) return res; notifier.notifier_call = &recv_notification; notifier.priority = 0; res = register_netdevice_notifier(¬ifier); if (!res) eth_started = 1; return res; } /** * tipc_eth_media_stop - deactivate Ethernet bearer support */ void tipc_eth_media_stop(void) { if (!eth_started) return; flush_scheduled_work(); unregister_netdevice_notifier(¬ifier); eth_started = 0; }