From b76dc0546709aef18f123847680108c2fd33f203 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Mon, 13 Sep 2010 20:23:12 +0200 Subject: pcmcia pcnet_cs: try setting io_lines to 16 if card setup fails Some pcnet_cs compatible cards require an exact 16-lines match of the ioport areas specified in CIS, but set the "iolines" value in the CIS incorrectly. We can easily work around this issue -- same as we do in serial_cs -- by first trying setting iolines to the CIS-specified value, and then trying a 16-line match. Reported-and-tested-by: Wolfram Sang Hardware-supplied-by: Jochen Frieling CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/pcnet_cs.c | 139 +++++++++++++++++++++++++----------------- 1 file changed, 83 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 49279b0ee52..f9b509a6b09 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -508,7 +508,8 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - int *has_shmem = priv_data; + int *priv = priv_data; + int try = (*priv & 0x1); int i; cistpl_io_t *io = &cfg->io; @@ -525,77 +526,103 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev, i = p_dev->resource[1]->end = 0; } - *has_shmem = ((cfg->mem.nwin == 1) && - (cfg->mem.win[0].len >= 0x4000)); + *priv &= ((cfg->mem.nwin == 1) && + (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10; + p_dev->resource[0]->start = io->win[i].base; p_dev->resource[0]->end = io->win[i].len; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + if (!try) + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + else + p_dev->io_lines = 16; if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) return try_io_port(p_dev); - return 0; + return -EINVAL; +} + +static hw_info_t *pcnet_try_config(struct pcmcia_device *link, + int *has_shmem, int try) +{ + struct net_device *dev = link->priv; + hw_info_t *local_hw_info; + pcnet_dev_t *info = PRIV(dev); + int priv = try; + int ret; + + ret = pcmcia_loop_config(link, pcnet_confcheck, &priv); + if (ret) { + dev_warn(&link->dev, "no useable port range found\n"); + return NULL; + } + *has_shmem = (priv & 0x10); + + if (!link->irq) + return NULL; + + if (resource_size(link->resource[1]) == 8) { + link->conf.Attributes |= CONF_ENABLE_SPKR; + link->conf.Status = CCSR_AUDIO_ENA; + } + if ((link->manf_id == MANFID_IBM) && + (link->card_id == PRODID_IBM_HOME_AND_AWAY)) + link->conf.ConfigIndex |= 0x10; + + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + return NULL; + + dev->irq = link->irq; + dev->base_addr = link->resource[0]->start; + + if (info->flags & HAS_MISC_REG) { + if ((if_port == 1) || (if_port == 2)) + dev->if_port = if_port; + else + dev_notice(&link->dev, "invalid if_port requested\n"); + } else + dev->if_port = 0; + + if ((link->conf.ConfigBase == 0x03c0) && + (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { + dev_info(&link->dev, + "this is an AX88190 card - use axnet_cs instead.\n"); + return NULL; + } + + local_hw_info = get_hwinfo(link); + if (!local_hw_info) + local_hw_info = get_prom(link); + if (!local_hw_info) + local_hw_info = get_dl10019(link); + if (!local_hw_info) + local_hw_info = get_ax88190(link); + if (!local_hw_info) + local_hw_info = get_hwired(link); + + return local_hw_info; } static int pcnet_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); - int ret, start_pg, stop_pg, cm_offset; + int start_pg, stop_pg, cm_offset; int has_shmem = 0; hw_info_t *local_hw_info; dev_dbg(&link->dev, "pcnet_config\n"); - ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem); - if (ret) - goto failed; - - if (!link->irq) - goto failed; - - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - if ((link->manf_id == MANFID_IBM) && - (link->card_id == PRODID_IBM_HOME_AND_AWAY)) - link->conf.ConfigIndex |= 0x10; - - ret = pcmcia_request_configuration(link, &link->conf); - if (ret) - goto failed; - dev->irq = link->irq; - dev->base_addr = link->resource[0]->start; - if (info->flags & HAS_MISC_REG) { - if ((if_port == 1) || (if_port == 2)) - dev->if_port = if_port; - else - printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n"); - } else { - dev->if_port = 0; - } - - if ((link->conf.ConfigBase == 0x03c0) && - (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { - printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n"); - printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n"); - goto failed; - } - - local_hw_info = get_hwinfo(link); - if (local_hw_info == NULL) - local_hw_info = get_prom(link); - if (local_hw_info == NULL) - local_hw_info = get_dl10019(link); - if (local_hw_info == NULL) - local_hw_info = get_ax88190(link); - if (local_hw_info == NULL) - local_hw_info = get_hwired(link); - - if (local_hw_info == NULL) { - printk(KERN_NOTICE "pcnet_cs: unable to read hardware net" - " address for io base %#3lx\n", dev->base_addr); - goto failed; + local_hw_info = pcnet_try_config(link, &has_shmem, 0); + if (!local_hw_info) { + /* check whether forcing io_lines to 16 helps... */ + pcmcia_disable_device(link); + local_hw_info = pcnet_try_config(link, &has_shmem, 1); + if (local_hw_info == NULL) { + dev_notice(&link->dev, "unable to read hardware net" + " address for io base %#3lx\n", dev->base_addr); + goto failed; + } } info->flags = local_hw_info->flags; -- cgit v1.2.3