From 78040b630f28298e0ecb56bf1bc53c7976314eab Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 24 Apr 2013 11:51:12 +0800 Subject: regulator: mc13892: Fix MC13892_SWITCHERS0_SWxHI bit in set_voltage_sel It is necessary to clear MC13892_SWITCHERS0_SWxHI bit when set voltage to the voltage range from 1100000 to 1375000. Leaving MC13892_SWITCHERS0_SWxHI bit untouched may result in wrong voltage setting. For example, currently switch voltage from 1400000 to 1300000 will set the voltage to 1800000 because the HI bit is still set. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/mc13892-regulator.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index 364ddd1c859..b8d35ec598e 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -465,13 +465,13 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev, */ if (mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) { + mask |= MC13892_SWITCHERS0_SWxHI; + if (volt > 1375000) { reg_value -= MC13892_SWxHI_SEL_OFFSET; reg_value |= MC13892_SWITCHERS0_SWxHI; - mask |= MC13892_SWITCHERS0_SWxHI; - } else if (volt < 1100000) { + } else { reg_value &= ~MC13892_SWITCHERS0_SWxHI; - mask |= MC13892_SWITCHERS0_SWxHI; } } -- cgit v1.2.3