summaryrefslogtreecommitdiff
path: root/net/bluetooth/hidp
AgeCommit message (Collapse)AuthorFilesLines
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID subsystem updates from Jiri Kosina: 1) Support for HID over I2C bus has been added by Benjamin Tissoires. ACPI device discovery is still in the works. 2) Support for Win8 Multitiouch protocol is being added, most work done by Benjamin Tissoires as well 3) EIO/ERESTARTSYS is fixed in hiddev/hidraw, fixes by Andrew Duggan and Jiri Kosina 4) ION iCade driver added by Bastien Nocera 5) Support for a couple new Roccat devices has been added by Stefan Achatz 6) HID sensor hubs are now auto-detected instead of having to list all the VID/PID combinations in the blacklist array 7) other random fixes and support for new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (65 commits) HID: i2c-hid: add mutex protecting open/close race Revert "HID: sensors: add to special driver list" HID: sensors: autodetect USB HID sensor hubs HID: hidp: fallback to input session properly if hid is blacklisted HID: i2c-hid: fix ret_count check HID: i2c-hid: fix i2c_hid_get_raw_report count mismatches HID: i2c-hid: remove extra .irq field in struct i2c_hid HID: i2c-hid: reorder allocation/free of buffers HID: i2c-hid: fix memory corruption due to missing hid declaration HID: i2c-hid: remove superfluous include HID: i2c-hid: remove unneeded test in i2c_hid_remove HID: i2c-hid: i2c_hid_get_report may fail HID: i2c-hid: also call i2c_hid_free_buffers in i2c_hid_remove HID: i2c-hid: fix error messages HID: i2c-hid: fix return paths HID: i2c-hid: remove unused static declarations HID: i2c-hid: fix i2c_hid_dbg macro HID: i2c-hid: fix checkpatch.pl warning HID: i2c-hid: enhance Kconfig HID: i2c-hid: change I2C name ...
2012-12-12Merge branches 'for-3.7/upstream-fixes', 'for-3.8/hidraw', ↵Jiri Kosina2-2/+29
'for-3.8/i2c-hid', 'for-3.8/multitouch', 'for-3.8/roccat', 'for-3.8/sensors' and 'for-3.8/upstream' into for-linus Conflicts: drivers/hid/hid-core.c
2012-12-07HID: hidp: fallback to input session properly if hid is blacklistedLamarque V. Souza1-1/+8
This patch against kernel 3.7.0-rc8 fixes a kernel oops when turning on the bluetooth mouse with id 0458:0058 [1]. The mouse in question supports both input and hid sessions, however it is blacklisted in drivers/hid/hid-core.c so the input session is one that should be used. Long ago (around kernel 3.0.0) some changes in the bluetooth subsystem made the kernel do not fallback to input session when hid session is not supported or blacklisted. This patch restore that behaviour by making the kernel try the input session if hid_add_device returns ENODEV. The patch exports hid_ignore() from hid-core.c so that it can be used in the bluetooth subsystem. [1] https://bugzilla.kernel.org/show_bug.cgi?id=39882 Signed-off-by: Lamarque V. Souza <lamarque@gmail.com> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-19Merge branch 'master' of ↵John W. Linville1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27Bluetooth: Use %pMR in sprintf/seq_printf instead of batostrAndrei Emeltchenko1-2/+6
Instead of old unsafe batostr function use %pMR print specifier for printing Bluetooth addresses in sprintf and seq_printf statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-21net: change return values from -EACCES to -EPERMZhao Hongjiang1-2/+2
Change return value from -EACCES to -EPERM when the permission check fails. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-06Bluetooth: Added /proc/net/hidp via bt_procfs_init()Masatake YAMATO1-1/+21
Added /proc/net/hidp via bt_procfs_init(). Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/caif/caif_hsi.c drivers/net/usb/qmi_wwan.c The qmi_wwan merge was trivial. The caif_hsi.c, on the other hand, was not. It's a conflict between 1c385f1fdf6f9c66d982802cd74349c040980b50 ("caif-hsi: Replace platform device with ops structure.") in the net-next tree and commit 39abbaef19cd0a30be93794aa4773c779c3eb1f3 ("caif-hsi: Postpone init of HIS until open()") in the net tree. I did my best with that one and will ask Sjur to check it out. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25HID: Fix the generic Kconfig optionsHenrik Rydberg1-1/+1
The generic HID driver is obviously not a special driver, so move it outside of the special drivers menu. Explain the usage and make the default follow the HID setting. This should simplify migration from older kernels. While at it, remove the redundant HID_SUPPORT option and modify the HID and USB_HID entries to better explain the bus structure. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-09Bluetooth: Fix style in hidp codeGustavo Padovan1-1/+2
Follow the net rules. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Remove unnecessary headers includeGustavo Padovan2-34/+1
Most of the include were unnecessary or already included by some other header. Replace module.h by export.h where possible. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove most of the inline usageGustavo Padovan1-2/+2
Only obvious cases were left as inline, mostly oneline functions. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-05-01HID: Create a common generic driverHenrik Rydberg1-26/+1
Move the hid drivers of the bus drivers to a common generic hid driver, and make it a proper module. This ought to simplify device handling moving forward. Cc: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Create a generic device groupHenrik Rydberg1-1/+1
Devices that do not have a special driver are handled by the generic driver. This patch does the same thing using device groups; Instead of forcing a particular driver, the appropriate driver is picked up by udev. As a consequence, one can now move a device from generic to specific handling by a simple rebind. By adding a new device id to the generic driver, the same thing can be done in reverse. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-27Bluetooth: Use kernel int types instead of ones from stdint.hJohan Hedberg1-3/+3
u8/__u8/u32/etc should be used in the kernel instead of stdint.h types. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2011-12-21Bluetooth: Always compile SCO and L2CAP in Bluetooth CoreUlisses Furquim1-1/+1
The handling of SCO audio links and the L2CAP protocol are essential to any system with Bluetooth thus are always compiled in from now on. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Replace spin_lock by mutex in hci_devGustavo F. Padovan1-2/+2
Now we run everything in HCI in process context, so it's a better idea use mutex instead spin_lock. The macro remains hci_dev_lock() (and I got rid of hci_dev_lock_bh()), of course. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-07Bluetooth: Fix hidp_get_connection()Gustavo F. Padovan1-6/+6
This functions needs crtl_sock and intr_sock to be set first. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-07Bluetooth: hidp: Fix module reference cleanupDavid Herrmann1-2/+2
Calling module_put(THIS_MODULE) is *never* safe when we cannot go sure that we own at least two references. This is because the call may unload our module before it returns and then the "return" will jump into invalid memory. Gladly, module.h provides a wrapper for kthread-users: module_put_and_exit(). This puts our module and then exits the kthread without returning to the module. This patch fixes the hidp kthread to use this wrapper instead of manually freeing its own reference. See nfsd or lockd for other kthreads using this. Calling __module_get() inside the kthread is safe as the hidp module will always wait until the kthread sets "waiting_for_startup" to 0. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-07Bluetooth: replace list_for_each with list_for_each_entry whenever possibleLuiz Augusto von Dentz1-0/+1
When all items in the list have the same type there is no much of a point to use list_for_each except if you want to use the list pointer itself. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: Rename hidp_find_connection()Gustavo F. Padovan1-2/+2
hidp_get_connection() makes more sense because we hold a reference to the connection inside this function. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: Delay session allocation in hidpGustavo F. Padovan1-6/+8
It gets allocated only when it is really needed. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-07Bluetooth: hidp: safely acquire hci connectionPeter Hurley1-14/+20
Claim device lock to safely enumerate hci connection list and bump hci connection proxy device ref count simultaneously. This patch incorporates David Herrmann's fix to prevent adding an HID device when the hci connection no longer exists. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-06Bluetooth: Uses test_and_clear_bit() when possibleGustavo F. Padovan1-6/+3
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-06Bluetooth: Remove wrong error checkGustavo F. Padovan1-1/+1
d458a9dfc add this check, but now it proves to be wrong. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-06Bluetooth: Fix input device registrationGustavo F. Padovan1-9/+6
This is a regression fix. It made impossible use input device when hid fails. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-06Bluetooth: Trasmit interrupt channel messages firstGustavo F. Padovan1-8/+17
interrupt channel is low latency. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-06Bluetooth: prioritize the interrupt channel in hidpGustavo F. Padovan1-4/+4
Interrupt channel has low latency requiments, should be processed first. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-06Bluetooth: use list_for_each_entry() in hidpGustavo F. Padovan1-8/+3
list_for_each_entry is much more meaningful. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-06Bluetooth: hidp: Stop I/O on shutdownDavid Herrmann1-14/+20
Current hidp driver purges the in/out queue on HID shutdown, but does not prevent further I/O. If a driver uses hidp_output_raw_report or hidp_get_raw_report during shutdown, the driver hangs for 5 or 10 seconds per call until it gets a timeout. That is, if the output queue of an HID driver has 10 messages pending, it will take 50s until hid_destroy_device() will return. The hidp_session_sem semaphore is held during shutdown so no other HID device may be added/removed during this time. This patch makes hidp_output_raw_report and hidp_get_raw_report fail if session->terminate is true. Also hidp_session will wakeup all current calls to these functions to cancel the current operations. We already purge the current I/O queues on hidp_stop(), so this data loss does not change the behaviour of the HID drivers. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: Linearize skbs for use in BNEP, CMTP, HIDP, and RFCOMMMat Martineau1-2/+8
Fragmented skbs are only encountered when receiving ERTM or streaming mode L2CAP data. BNEP, CMTP, HIDP, and RFCOMM generally use basic mode, but they need to handle fragments without crashing. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: hidp: Add support for NO_INIT_REPORTS quirkDavid Herrmann1-0/+3
During setup the host initializes all HID reports. Some devices do not support this. If this quirk is set, we skip the initialization. See also usbhid_init_reports() for this quirk. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: hidp: Don't release device ref if never heldPeter Hurley1-1/+0
When an hidp connection is added for a boot protocol input device, don't release a device reference that was never acquired. The device reference is acquired when the session is linked to the session list (which hasn't happened yet when hidp_setup_input is called). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: hidp: Only free input device if failed registerPeter Hurley1-1/+2
When an hidp connection is added for a boot protocol input device, only free the allocated device if device registration fails. Subsequent failures should only unregister the device (the input device api documents that unregister will also free the allocated device). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: hidp: Fix memory leak of cached report descriptorPeter Hurley1-0/+1
Free the cached HID report descriptor on thread terminate. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-08-11Bluetooth: hidp: Fix session cleanup on failed conn addPeter Hurley1-8/+6
Once the session thread is running, cleanup must be handled by the session thread only. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-30Bluetooth: Fix hidp disconnect deadlocks and lost wakeupPeter Hurley2-7/+12
Partial revert of commit aabf6f89. When the hidp session thread was converted from kernel_thread to kthread, the atomic/wakeups were replaced with kthread_stop. kthread_stop has blocking semantics which are inappropriate for the hidp session kthread. In addition, the kthread signals itself to terminate in hidp_process_hid_control() - it cannot do this with kthread_stop(). Lastly, a wakeup can be lost if the wakeup happens between checking for the loop exit condition and setting the current state to TASK_INTERRUPTIBLE. (Without appropriate synchronization mechanisms, the task state should not be changed between the condition test and the yield - via schedule() - as this creates a race between the wakeup and resetting the state back to interruptible.) Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (36 commits) HID: hid-multitouch: cosmetic changes, sort classes and devices HID: hid-multitouch: class MT_CLS_STANTUM is redundant with MT_CLS_CONFIDENCE HID: hid-multitouch: add support for Unitec panels HID: hid-multitouch: add support for Touch International panels HID: hid-multitouch: add support for GoodTouch panels HID: hid-multitouch: add support for CVTouch panels HID: hid-multitouch: add support for ActionStar panels HID: hiddev: fix race between hiddev_disconnect and hiddev_release HID: magicmouse: ignore 'ivalid report id' while switching modes HID: fix a crash in hid_report_raw_event() function. HID: hid-multitouch: add support for Elo TouchSystems 2515 IntelliTouch Plus HID: assorted usage updates from hut 1.12 HID: roccat: fix actual/startup profile sysfs attribute in koneplus HID: hid-multitouch: Add support for Lumio panels HID: 'name' and 'phys' in 'struct hid_device' can never be NULL HID: hid-multitouch: add support for Ilitek dual-touch panel HID: picolcd: Avoid compile warning/error triggered by copy_from_user() HID: add support for Logitech G27 wheel HID: hiddev: fix error path in hiddev_read when interrupted HID: add support for Sony Navigation Controller ...
2011-04-28Bluetooth: Move more channel info to struct l2cap_chanGustavo F. Padovan1-2/+4
In this commit, omtu, imtu, flush_to, mode and sport. It also remove the pi var from l2cap_sock_sendmsg(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-21HID: bt: hidp.h: do not use a tab after a #defineAntonio Ospite1-1/+1
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-05Bluetooth: Use kthread API in hidpSzymon Janc2-30/+25
kernel_thread() is a low-level implementation detail and EXPORT_SYMBOL(kernel_thread) is scheduled for removal. Use the <linux/kthread.h> API instead. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-31Bluetooth: Fix checkpatch errors, code style issues and typos in hidpSzymon Janc3-22/+26
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds2-16/+196
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (48 commits) HID: add support for Logitech Driving Force Pro wheel HID: hid-ortek: remove spurious reference HID: add support for Ortek PKB-1700 HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor' HID: hid-ntrig: init settle and mode check HID: merge hid-egalax into hid-multitouch HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing HID: ntrig remove if and drop an indent HID: ACRUX - activate the device immediately after binding HID: ntrig: apply NO_INIT_REPORTS quirk HID: hid-magicmouse: Correct touch orientation direction HID: ntrig don't dereference unclaimed hidinput HID: Do not create input devices for feature reports HID: bt hidp: send Output reports using SET_REPORT on the Control channel HID: hid-sony.c: Fix sending Output reports to the Sixaxis HID: add support for Keytouch IEC 60945 HID: Add HID Report Descriptor to sysfs HID: add IRTOUCH infrared USB to hid_have_special_driver HID: kernel oops in out_cleanup in function hidinput_connect HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE) ...
2011-03-17Merge branches 'dragonrise', 'hidraw-feature', 'multitouch', 'ntrig', ↵Jiri Kosina2-16/+196
'roccat', 'upstream' and 'upstream-fixes' into for-linus
2011-02-22HID: bt hidp: send Output reports using SET_REPORT on the Control channelAntonio Ospite1-1/+1
The current implementation of hidp_output_raw_report() relies only on the Control channel even for Output reports, and the BT HID specification [1] does not mention using the DATA message for Output reports on the Control channel (see section 7.9.1 and also Figure 11: SET_ Flow Chart), so let us just use SET_REPORT. This also fixes sending Output reports to some devices (like Sony Sixaxis) which are not able to handle DATA messages on the Control channel. Ideally hidp_output_raw_report() could be improved to use this scheme: Feature Report -- SET_REPORT on the Control channel Output Report -- DATA on the Interrupt channel for more efficiency, but as said above, right now only the Control channel is used. [1] http://www.bluetooth.com/Specification%20Documents/HID_SPEC_V10.pdf Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-15Bluetooth: remove l2cap_load() hackGustavo F. Padovan1-2/+0
l2cap_load() was added to trigger l2cap.ko module loading from the RFCOMM and BNEP modules. Now that L2CAP module is gone, we don't need it anymore. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-11HID: bt: Add support for hidraw HIDIOCGFEATURE and HIDIOCSFEATUREAlan Ott2-4/+117
This patch adds support or getting and setting feature reports for bluetooth HID devices from HIDRAW. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-11HID: bt: Wait for ACK on Sent ReportsAlan Ott2-3/+55
Wait for an ACK from the device before returning from hidp_output_raw_report(). This way, failures can be returned to the user application. Also, it prevents ACK/NAK packets from an output packet from being confused with ACK/NAK packets from an input request packet. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-11HID: bt: Move hid_add_device() call to after hidp_session() has started.Alan Ott2-8/+23
Move the call to hid_add_device() (which calls a device's probe() function) to after the kernel_thread() call which starts the hidp_session() thread. This ensures the Bluetooth receive socket is fully running by the time a device's probe() function is called. This way, a device can communicate (send and receive) with the Bluetooth device from its probe() function. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 10:29:02 +0000