summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)AuthorFilesLines
2013-12-17ath9k: Fix interrupt handling for the AR9002 familySujith Manoharan1-9/+43
This patch adds a driver workaround for a HW issue. A race condition in the HW results in missing interrupts, which can be avoided by a read/write with the ISR register. All chips in the AR9002 series are affected by this bug - AR9003 and above do not have this problem. Cc: stable@vger.kernel.org Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-17ath9k_htc: properly set MAC address and BSSID maskMathy Vanhoef2-10/+20
Pick the MAC address of the first virtual interface as the new hardware MAC address. Set BSSID mask according to this MAC address. This fixes CVE-2013-4579. Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09ath9k: fix duration calculation for non-aggregated packetsFelix Fietkau1-0/+4
When not aggregating packets, fi->framelen should be passed in as length to calculate the duration. Before the tx path rework, ath_tx_fill_desc was called for either one aggregate, or one single frame, with the length of the packet or the aggregate as a parameter. After the rework, ath_tx_sched_aggr can pass a burst of single frames to ath_tx_fill_desc and sets len=0. Fix broken duration calculation by overriding the length in ath_tx_fill_desc before passing it to ath_buf_set_rate. Cc: stable@vger.kernel.org Reported-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02net: wireless: wcn36xx: fix potential NULL pointer dereferenceMichal Nazarewicz1-6/+13
If kmalloc fails wcn36xx_smd_rsp_process will attempt to dereference a NULL pointer. There might be a better error recovery then just printing an error, but printing an error message is better then the current behaviour. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02net: wireless: ath9k: avoid possible NULL pointer dereferenceMichal Nazarewicz1-4/+3
Code in ath9k_hw_set_clockrate function indicates that ah->curchan (and thus chan local variable) may be NULL. If that is indeed the case, IS_CHAN_HT40(chan) check has to be performed only in branch where chan is not NULL. Moving the code under already existing if condition fixes this issue. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Fix XLNA bias strengthSujith Manoharan1-1/+1
The EEPROM parameter to determine whether the bias strength values for XLNA have to be applied is part of the miscConfiguration field and not featureEnable. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Fix QuickDrop usageSujith Manoharan1-9/+11
Bit 5 in the miscConfiguration field of the base EEPROM header denotes whether QuickDrop is enabled or not. Fix the incorrect usage of BIT(1) and also make sure that this is done only for the required chips. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-21Merge branch 'master' of ↵John W. Linville4-4/+66
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds9-57/+147
Pull networking fixes from David Miller: "Mostly these are fixes for fallout due to merge window changes, as well as cures for problems that have been with us for a much longer period of time" 1) Johannes Berg noticed two major deficiencies in our genetlink registration. Some genetlink protocols we passing in constant counts for their ops array rather than something like ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were using fixed IDs for their multicast groups. We have to retain these fixed IDs to keep existing userland tools working, but reserve them so that other multicast groups used by other protocols can not possibly conflict. In dealing with these two problems, we actually now use less state management for genetlink operations and multicast groups. 2) When configuring interface hardware timestamping, fix several drivers that simply do not validate that the hwtstamp_config value is one the driver actually supports. From Ben Hutchings. 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar. 4) In dev_forward_skb(), set the skb->protocol in the right order relative to skb_scrub_packet(). From Alexei Starovoitov. 5) Bridge erroneously fails to use the proper wrapper functions to make calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki Makita. 6) When detaching a bridge port, make sure to flush all VLAN IDs to prevent them from leaking, also from Toshiaki Makita. 7) Put in a compromise for TCP Small Queues so that deep queued devices that delay TX reclaim non-trivially don't have such a performance decrease. One particularly problematic area is 802.11 AMPDU in wireless. From Eric Dumazet. 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts here. Fix from Eric Dumzaet, reported by Dave Jones. 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn. 10) When computing mergeable buffer sizes, virtio-net fails to take the virtio-net header into account. From Michael Dalton. 11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic bumping, this one has been with us for a while. From Eric Dumazet. 12) Fix NULL deref in the new TIPC fragmentation handling, from Erik Hugne. 13) 6lowpan bit used for traffic classification was wrong, from Jukka Rissanen. 14) macvlan has the same issue as normal vlans did wrt. propagating LRO disabling down to the real device, fix it the same way. From Michal Kubecek. 15) CPSW driver needs to soft reset all slaves during suspend, from Daniel Mack. 16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet. 17) The xen-netfront RX buffer refill timer isn't properly scheduled on partial RX allocation success, from Ma JieYue. 18) When ipv6 ping protocol support was added, the AF_INET6 protocol initialization cleanup path on failure was borked a little. Fix from Vlad Yasevich. 19) If a socket disconnects during a read/recvmsg/recvfrom/etc that blocks we can do the wrong thing with the msg_name we write back to userspace. From Hannes Frederic Sowa. There is another fix in the works from Hannes which will prevent future problems of this nature. 20) Fix route leak in VTI tunnel transmit, from Fan Du. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) genetlink: make multicast groups const, prevent abuse genetlink: pass family to functions using groups genetlink: add and use genl_set_err() genetlink: remove family pointer from genl_multicast_group genetlink: remove genl_unregister_mc_group() hsr: don't call genl_unregister_mc_group() quota/genetlink: use proper genetlink multicast APIs drop_monitor/genetlink: use proper genetlink multicast APIs genetlink: only pass array to genl_register_family_with_ops() tcp: don't update snd_nxt, when a socket is switched from repair mode atm: idt77252: fix dev refcnt leak xfrm: Release dst if this dst is improper for vti tunnel netlink: fix documentation typo in netlink_set_err() be2net: Delete secondary unicast MAC addresses during be_close be2net: Fix unconditional enabling of Rx interface options net, virtio_net: replace the magic value ping: prevent NULL pointer dereference on write to msg_name bnx2x: Prevent "timeout waiting for state X" bnx2x: prevent CFC attention bnx2x: Prevent panic during DMAE timeout ...
2013-11-15Merge branch 'for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-15ath9k: Fix issue with MCS15Sujith Manoharan2-0/+61
On some boards which are based on AR9300, AR9580 or AR9550, MCS15 usage is problematic. This is because these boards use a "frequency doubler", which doubles the refclk to get better EVM, but causes spurs. Handle this properly in the driver to recover throughput. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15ath9k: Update AR9462 2.1 initvalsSujith Manoharan1-3/+3
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15ath: fix dynamic user regulatory settingsLuis R. Rodriguez1-1/+2
A world regulatory domain check was in place that prevents user dynamic regulatory hints from being processed. This was there for historical reasons as this was only possible previously for world roaming cards and dynamic regulatory settings was only possible for country IEs. Fix this by enforcing the world regulatory domain check only for when the initiator is a country IE. Support for dynamic user regulatory support is already checked. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang4-13/+13
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-11wcn36xx: missing unlocks on error pathsDan Carpenter1-2/+4
There are several places which are missing unlocks. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11wcn36xx: Add missing unlock before returnWei Yongjun1-1/+2
Add the missing unlock before return from function wcn36xx_smd_update_proberesp_tmpl() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11ath9k: Use correct PCIE initvals for AR9485Sujith Manoharan6-48/+128
Currently, the PLL is turned off for AR9485 when switching to a low power state, but AR9485 has an issue where the card will become unresponsive if left idle for a long time without any traffic. To fix this, force the PLL to always be on using a different initval array, ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1. This is done for most of the AR9485 based cards like HB125, WB225 etc. but certain models require the feature to be turned off. Identify such cards and use default values for them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11wcn36xx: harmless memory corruption bug in debugfsDan Carpenter1-1/+1
On 64 bit systems we write past the end of the arg[] array. Fixes: 8e84c2582169 ('wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11ath9k: dfs_debug fix possible NULL dereferenceJanusz Dziedzic1-3/+10
Fix possible NULL (sc->dfs_detector) pointer dereference. Detected by Smatch: drivers/net/wireless/ath/ath9k/dfs_debug.c:67 read_file_dfs() error: we previously assumed 'sc->dfs_detector' could be null (see line 47) Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11ath9k: DFS radar use correct width enumJanusz Dziedzic1-2/+2
Use correct width enums when setup radar_detect_widths for DFS. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-08Merge branch 'master' of ↵John W. Linville1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-11-07ath9k: enable DFS for IBSS modeSimon Wunderlich1-1/+2
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-04Merge branch 'master' of ↵John W. Linville42-518/+3542
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
2013-11-04Merge branch 'master' of ↵John W. Linville4-28/+34
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-12/+11
Conflicts: drivers/net/usb/qmi_wwan.c include/net/dst.h Trivial merge conflicts, both were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18ath9k: add TX99 supportLuis R. Rodriguez12-17/+522
TX99 support enables Specific Absorption Rate (SAR) testing. SAR is the unit of measurement for the amount of radio frequency(RF) absorbed by the body when using a wireless device. The RF exposure limits used are expressed in the terms of SAR, which is a measure of the electric and magnetic field strength and power density for transmitters operating at frequencies from 300 kHz to 100 GHz. Regulatory bodies around the world require that wireless device be evaluated to meet the RF exposure limits set forth in the governmental SAR regulations. In the examples below, for more bit rate options see the iw TX bitrate setting documentation: http://wireless.kernel.org/en/users/Documentation/iw#Modifying_transmit_bitrates Example usage: iw phy phy0 interface add moni0 type monitor ip link set dev moni0 up iw dev moni0 set channel 36 HT40+ iw set bitrates mcs-5 4 echo 10 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99_power echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99 Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k: check for NULL rate when using ieee80211_get_rts_cts_rate()Luis R. Rodriguez1-0/+3
ieee80211_get_rts_cts_rate() can return NULL, so don't rely on its members when it does return NULL. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath: add support for proper dynamic regulatory hintsLuis R. Rodriguez2-0/+101
This enables support for dynamic user regulatory hints. This is enabled only when CFG80211_CERTIFICATION_ONUS is selected. For US and JP this is explicitly disabled unless the systems are being used for strict controlled testing. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath: split user and driver reguluatory hint parsingLuis R. Rodriguez1-0/+1
On the regulatory notifier split up the parsing of the hints coming from drivers or user. We'll treat these separately. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath: move common dynamic regulatory domain setting to a helperLuis R. Rodriguez1-18/+37
This moves the dynamic regulatory domain selection code into a helper. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k/ath: move dfs pattern detector to athJanusz Dziedzic8-8/+8
Move the DFS pattern detector code to the ath module so the other Atheros drivers can make us of it. This makes no functional changes. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k: dfs use CFG80211_CERTIFICATION_ONUS flagJanusz Dziedzic2-10/+3
Use CFG80211_CERTIFICATION_ONUS flag in the DFS detector code. This is required as a preparation for moving DFS detector code from ath9k to ath module. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k: dfs move ath_dfs_pool_statsJanusz Dziedzic6-21/+35
Move ath_dfs_pool_stats to dfs_pattern_detector code to be not specyfic only for ath9k. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k: dfs kill ath9k specyfic codeJanusz Dziedzic3-12/+13
Kill of using ath9k_hw_common() function in dfs detector code. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k: add HT40 spectral scan capabilityLorenzo Bianconi2-38/+137
Add spectral scan feature on HT40 channels for ath9k. This patch extends previous capability added by Simon Wunderlich Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Reviewed-by: Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de> Tested-by: Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath9k: add noise floor parameter to ath9k_hw_getchan_noiseLorenzo Bianconi4-8/+10
Add nf parameter to ath9k_hw_getchan_noise() in order to compute NF for EXT chains with the same scale of noise floor calculated on CTL chains. ath9k_hw_getchan_noise() will be used in ath_process_fft() for spectral scan on HT40 channels Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18Merge branch 'for-linville' of git://github.com/kvalo/athJohn W. Linville15-388/+2674
2013-10-18ath5k: fix regression in tx status processingFelix Fietkau1-3/+3
The regression was introduced in the following commit: 0967e01e8e713ed2982fb4eba8ba13794e9a6e89 "ath5k: make use of the new rate control API" ath5k_tx_frame_completed saves the intended per-rate retry counts before they are cleared by ieee80211_tx_info_clear_status, however at this point the information in info->status.rates is incomplete. This causes significant throughput degradation and excessive packet loss on links where high bit rates don't work properly. Move the copy from bf->rates a few lines up to ensure that the saved retry counts are updated, and that they are really cleared in info->status.rates after the call to ieee80211_tx_info_clear_status. Cc: stable@vger.kernel.org # 3.10+ Cc: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Cc: Benjamin Vahl <bvahl@net.t-labs.tu-berlin.de> Reported-by: Ben West <ben@gowasabi.net> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-17Merge branch 'master' of ↵John W. Linville36-501/+10381
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-10-16ath10k: add might_sleep() to ath10k_wmi_cmd_send()Kalle Valo1-0/+2
ath10k_wmi_cmd_send() will now sleep if there are no credits available. To make it easier to catch callers in atomic context add might_sleep() to the function. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: fix ath10k_bss_assoc() to not sleep in atomic contextKalle Valo1-19/+37
ath10k_bss_assoc() was calling ath10k_peer_assoc(), which can sleep, under atomic rcu_read_lock() and causing scheduing while atomic errors. Workaround that by delaying the call to ath10k_wmi_peer_assoc(). Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: remove unnecessary checksMichal Kazior1-21/+0
mac80211 interface iteration functions that were used originally iterated over interfaces that weren't re-added to the driver during recovery. Since internal vif list is now used it's safe to remove the safe-guard as internal vif list is based on add/remove_interface function which guarantees that vdev is created in FW before it is iterated over. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: fix scheduling while atomic config bugMichal Kazior1-84/+62
Recent HTC/WMI changes introduced the bug. ath10k was using _atomic iteration function with sleepable functions. mac80211 provides another iteration function but it cannot be safely called in hw_config() callback due to local->iflist_mtx being possibly acquired already. The patch uses internal vif list for iteration purposes and removes/refactors no longer necessary _iter functions. Reported-By: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: track vif list internallyMichal Kazior3-0/+7
mac80211 interface interations functions have peculiar locking issues. This patch introduces internal (to ath10k) vif list that will be used for vif iteration purposes. kvalo: remove extra INIT_LIST_HEAD() Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: fix add_interface failure handlingMichal Kazior1-13/+40
If something failed along add_interface() setup it was possible to leak a vdev id, vdev and peer. This could end up with leaked FW state or FW crash (assuming add_interface() failure wasn't a result of a crash). kvalo: rebased, whitespace fixes Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: use workqueue to set WEP TX keyMichal Kazior2-18/+39
Recent WMI/HTC changes made it possible for WMI commands to sleep (if there's not enough HTC TX credits to submit a command). TX path is in an atomic context so calling WMI commands in it is wrong. This simply moves WEP key index update to a worker and fixes the 'scheduling while atomic' bug. This still leaves multiple WEP key handling laggy, i.e. some frames may be TXed with an old/different key (although recipient should still be able to RX them). kvalo: changed the title Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: return better errno for unsupported pdev paramsBartosz Markowski1-1/+1
Return -EOPNOTSUPP if given parameter is not supported by firmware. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: rename WMI_CMD_UNDEFINEDBartosz Markowski2-24/+24
Rename WMI_CMD_UNDEFINED to WMI_CMD_UNSUPPORTED. This is more accurate here. Also return -EOPNOTSUPP instead of -EINVAL in wmi_cmd_send(). Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-16ath10k: do not warn about unsupported vdev paramBartosz Markowski2-2/+3
10.X firmware does not support WMI_VDEV_PARAM_TX_ENCAP_TYPE. It's a known limitation and we should not warn about this. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-10-14ath9k_hw: remove references to hw->confFelix Fietkau5-20/+15
Accessing it to get the current operating channel is racy and in the way of further channel handling related changes Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 15:20:21 +0000