| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Expansion of original idea from Denis V. Lunev <den@openvz.org>
Add robustness and locking to the local_port_range sysctl.
1. Enforce that low < high when setting.
2. Use seqlock to ensure atomic update.
The locking might seem like overkill, but there are
cases where sysadmin might want to change value in the
middle of a DoS attack.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add port randomization rather than a simple fixed rover
for use with SCTP. This makes it act similar to TCP, UDP, DCCP
when allocating ports.
No longer need port_alloc_lock as well (suggestion by Brian Haley).
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
/proc/net/psched
The fourth parameter of /proc/net/psched is supposed to show the timer
resultion and is used by HTB userspace to calculate the necessary
burst rate. Currently we show the clock resolution, which results in a
too low burst rate when the two differ.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the default WoL setting to match the NVRAM's setting. It
always defaulted to WoL disabled before and caused a lot of confusion
for users.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The remote PHY media type and link status can change between
->probe() and ->open(). For correct operation, we need to get the
new status again during ->open().
The ethtool link test and loopback test are also fixed to work with
remote PHY. PHY loopback is simply skipped when remote PHY is
present.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch makes the IPv4 x->type->input functions return the next protocol
instead of setting it directly. This is identical to how we do things in
IPv6 and will help us merge common code on the input path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch moves the setting of the IP length and checksum fields out of
the transforms and into the xfrmX_output functions. This would help future
efforts in merging the transforms themselves.
It also adds an optimisation to ipcomp due to the fact that the transport
offset is guaranteed to be zero.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes the duplicate ipv6_{auth,esp,comp}_hdr structures since
they're identical to the IPv4 versions. Duplicating them would only create
problems for ourselves later when we need to add things like extended
sequence numbers.
I've also added transport header type conversion headers for these types
which are now used by the transforms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IPv6 calling convention for x->mode->output is more general and could
help an eventual protocol-generic x->type->output implementation. This
patch adopts it for IPv4 as well and modifies the IPv4 type output functions
accordingly.
It also rewrites the IPv6 mac/transport header calculation to be based off
the network header where practical.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch changes the calling convention so that on entry from
x->mode->output and before entry into x->type->output skb->data
will point to the payload instead of the IP header.
This is essentially a redistribution of skb_push/skb_pull calls
with the aim of minimising them on the common path of tunnel +
ESP.
It'll also let us use the same calling convention between IPv4
and IPv6 with the next patch.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The beet output function completely kills any extension headers by replacing
them with the IPv6 header. This is because it essentially ignores the
result of ip6_find_1stfragopt by simply acting as if there aren't any
extension headers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I pointed this out back when this patch was first proposed but it looks like
it got lost along the way.
The checksum only needs to be ignored for NAT-T in transport mode where
we lose the original inner addresses due to NAT. With BEET the inner
addresses will be intact so the checksum remains valid.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To judge the timing for DAD, netif_carrier_ok() is used. However,
there is a possibility that dev->qdisc stays noop_qdisc even if
netif_carrier_ok() returns true. In that case, DAD NS is not sent out.
We need to defer the IPv6 device initialization until a valid qdisc
is specified.
Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The unregister_netdevice() and dev_change_net_namespace()
both check for dev->flags to be IFF_UP before calling the
dev_close(), but the dev_close() checks for IFF_UP itself,
so remove those unneeded checks.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Follows own function for each task principle, this is really
somewhat separate task being done in sacktag. Also reduces
indentation.
In addition, added ack_seq local var to break some long
lines & fixed coding style things.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are currently several SHA implementations that all define their own
initialization vectors and size values. Since this values are idential
move them to a header file under include/crypto.
Signed-off-by: Jan Glauber <jang@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Loading the crypto algorithm by the alias instead of by module directly
has the advantage that all possible implementations of this algorithm
are loaded automatically and the crypto API can choose the best one
depending on its priority.
Additionally it ensures that the generic implementation as well as the
HW driver (if available) is loaded in case the HW driver needs the
generic version as fallback in corner cases.
Also remove the probe for sha1 in padlock's init code.
Quote from Herbert:
The probe is actually pointless since we can always probe when
the algorithm is actually used which does not lead to dead-locks
like this.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Loading the crypto algorithm by the alias instead of by module directly
has the advantage that all possible implementations of this algorithm
are loaded automatically and the crypto API can choose the best one
depending on its priority.
Additionally it ensures that the generic implementation as well as the
HW driver (if available) is loaded in case the HW driver needs the
generic version as fallback in corner cases.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Loading the crypto algorithm by the alias instead of by module directly
has the advantage that all possible implementations of this algorithm
are loaded automatically and the crypto API can choose the best one
depending on its priority.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the helper blkcipher_walk_virt_block which is similar to
blkcipher_walk_virt but uses a supplied block size instead of the block
size of the block cipher. This is useful for CTR where the block size is
1 but we still want to walk by the block size of the underlying cipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the block size is no longer a multiple of the alignment, we need to
increase the kmalloc amount in blkcipher_next_slow to use the aligned block
size.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds a comment to explain why we compare the cra_driver_name of
the algorithm being registered against the cra_name of a larval as opposed
to the cra_driver_name of the larval.
In fact larvals have only one name, cra_name which is the name that was
requested by the user. The test here is simply trying to find out whether
the algorithm being registered can or can not satisfy the larval.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Previously we assumed for convenience that the block size is a multiple of
the algorithm's required alignment. With the pending addition of CTR this
will no longer be the case as the block size will be 1 due to it being a
stream cipher. However, the alignment requirement will be that of the
underlying implementation which will most likely be greater than 1.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We do not allow spaces in algorithm names or parameters. Thanks to Joy Latten
for pointing this out.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As Joy Latten points out, inner algorithm parameters will miss the closing
bracket which will also cause the outer algorithm to terminate prematurely.
This patch fixes that also kills the WARN_ON if the number of parameters
exceed the maximum as that is a user error.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
XTS currently considered to be the successor of the LRW mode by the IEEE1619
workgroup. LRW was discarded, because it was not secure if the encyption key
itself is encrypted with LRW.
XTS does not have this problem. The implementation is pretty straightforward,
a new function was added to gf128mul to handle GF(128) elements in ble format.
Four testvectors from the specification
http://grouper.ieee.org/groups/1619/email/pdf00086.pdf
were added, and they verify on my system.
Signed-off-by: Rik Snel <rsnel@cube.dyndns.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use max in blkcipher_get_spot() instead of open coding it.
Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When scatterwalk is built as a module digest.c was broken because it
requires the crypto_km_types structure which is in scatterwalk. This
patch removes the crypto_km_types structure by encoding the logic into
crypto_kmap_type directly.
In fact, this even saves a few bytes of code (not to mention the data
structure itself) on i386 which is about the only place where it's
needed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the authenc algorithm which constructs an AEAD algorithm
from an asynchronous block cipher and a hash. The construction is done
by concatenating the encrypted result from the cipher with the output
from the hash, as is used by the IPsec ESP protocol.
The authenc algorithm exists as a template with four parameters:
authenc(auth, authsize, enc, enckeylen).
The authentication algorithm, the authentication size (i.e., truncating
the output of the authentication algorithm), the encryption algorithm,
and the encryption key length. Both the size field and the key length
field are in bytes. For example, AES-128 with SHA1-HMAC would be
represented by
authenc(hmac(sha1), 12, cbc(aes), 16)
The key for the authenc algorithm is the concatenation of the keys for
the authentication algorithm with the encryption algorithm. For the
above example, if a key of length 36 bytes is given, then hmac(sha1)
would receive the first 20 bytes while the last 16 would be given to
cbc(aes).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch changes the return type of crypto_*_reqsize from int to
unsigned int which matches what the underlying type is (and should
be).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the function scatterwalk_map_and_copy which reads or
writes a chunk of data from a scatterlist at a given offset. It will
be used by authenc which would read/write the authentication data at
the end of the cipher/plain text.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The scatterwalk code is only used by algorithms that can be built as
a module. Therefore we can move it into algapi.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since not everyone needs a queue pointer and those who need it can
always get it from the context anyway the queue pointer in the
common alg object is redundant.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch ensures that kernel.h and slab.h are included for
the setkey_unaligned function. It also breaks a couple of
long lines.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for having multiple parameters to
a template, separated by a comma. It also adds support
for integer parameters in addition to the current algorithm
parameter type.
This will be used by the authenc template which will have
four parameters: the authentication algorithm, the encryption
algorithm, the authentication size and the encryption key
length.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds crypto_aead which is the interface for AEAD
(Authenticated Encryption with Associated Data) algorithms.
AEAD algorithms perform authentication and encryption in one
step. Traditionally users (such as IPsec) would use two
different crypto algorithms to perform these. With AEAD
this comes down to one algorithm and one operation.
Of course if traditional algorithms were used we'd still
be doing two operations underneath. However, real AEAD
algorithms may allow the underlying operations to be
optimised as well.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for the SEED cipher (RFC4269).
This patch have been used in few VPN appliance vendors in Korea for
several years. And it was verified by KISA, who developed the
algorithm itself.
As its importance in Korean banking industry, it would be great
if linux incorporates the support.
Signed-off-by: Hye-Shik Chang <perky@FreeBSD.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is function does the same thing for ablkcipher that is done for
blkcipher by crypto_blkcipher_ctx_aligned(): it returns an aligned
address of the private ctx.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Hardware drivers shouldn't default to m.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Other options requiring specific block cipher algorithms already have
the appropriate select's.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Just switch to the consolidated code.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just switch to the consolidated code
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just switch to the consolidated code.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just switch to the consolidated calls.
ipt_recent() has to initialize the private, so use
the __seq_open_private() helper.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This concerns the ipv4 and ipv6 code mostly, but also the netlink
and unix sockets.
The netlink code is an example of how to use the __seq_open_private()
call - it saves the net namespace on this private.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This function allocates the zeroed chunk of memory and
call seq_open(). The __seq_open_private() helper returns
the allocated memory to make it possible for the caller
to initialize it.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit da3dedd9 ("[NET]: Make NAPI polling independent of struct
net_device objects.") changed the interface to NAPI polling. Fix up
the ibm_newemac driver so that it works with this new interface. This
is actually a nice cleanup because ibm_newemac is one of the drivers
that wants to have multiple NAPI structures for a single net_device.
Compile-tested only as I don't have a system that uses the ibm_newemac
driver. This conversion the conversion for the ibm_emac driver that
was tested on real PowerPC 440SPe hardware.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Commit da3dedd9 ("[NET]: Make NAPI polling independent of struct
net_device objects.") changed the interface to NAPI polling. Fix up
the ibm_emac driver so that it works with this new interface. This is
actually a nice cleanup because ibm_emac is one of the drivers that
wants to have multiple NAPI structures for a single net_device.
Tested with the internal MAC of a PowerPC 440SPe SoC with an AMCC
'Yucca' evaluation board.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
