summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/arc_uart.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/arc_uart.c')
-rw-r--r--drivers/tty/serial/arc_uart.c35
1 files changed, 20 insertions, 15 deletions
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 22f280aa4f2..569872f4c9b 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -209,9 +209,9 @@ static void arc_serial_start_tx(struct uart_port *port)
arc_serial_tx_chars(uart);
}
-static void arc_serial_rx_chars(struct arc_uart_port *uart)
+static void arc_serial_rx_chars(struct arc_uart_port *uart, unsigned int status)
{
- unsigned int status, ch, flg = 0;
+ unsigned int ch, flg = 0;
/*
* UART has 4 deep RX-FIFO. Driver's recongnition of this fact
@@ -222,11 +222,11 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart)
* before RX-EMPTY=0, implies some sort of buffering going on in the
* controller, which is indeed the Rx-FIFO.
*/
- while (!((status = UART_GET_STATUS(uart)) & RXEMPTY)) {
-
- ch = UART_GET_DATA(uart);
- uart->port.icount.rx++;
-
+ do {
+ /*
+ * This could be an Rx Intr for err (no data),
+ * so check err and clear that Intr first
+ */
if (unlikely(status & (RXOERR | RXFERR))) {
if (status & RXOERR) {
uart->port.icount.overrun++;
@@ -242,14 +242,19 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart)
} else
flg = TTY_NORMAL;
- if (unlikely(uart_handle_sysrq_char(&uart->port, ch)))
- goto done;
+ if (status & RXEMPTY)
+ continue;
- uart_insert_char(&uart->port, status, RXOERR, ch, flg);
+ ch = UART_GET_DATA(uart);
+ uart->port.icount.rx++;
+
+ if (!(uart_handle_sysrq_char(&uart->port, ch)))
+ uart_insert_char(&uart->port, status, RXOERR, ch, flg);
-done:
+ spin_unlock(&uart->port.lock);
tty_flip_buffer_push(&uart->port.state->port);
- }
+ spin_lock(&uart->port.lock);
+ } while (!((status = UART_GET_STATUS(uart)) & RXEMPTY));
}
/*
@@ -292,11 +297,11 @@ static irqreturn_t arc_serial_isr(int irq, void *dev_id)
* notifications from the UART Controller.
* To demultiplex between the two, we check the relevant bits
*/
- if ((status & RXIENB) && !(status & RXEMPTY)) {
+ if (status & RXIENB) {
/* already in ISR, no need of xx_irqsave */
spin_lock(&uart->port.lock);
- arc_serial_rx_chars(uart);
+ arc_serial_rx_chars(uart, status);
spin_unlock(&uart->port.lock);
}
@@ -528,7 +533,7 @@ arc_uart_init_one(struct platform_device *pdev, int dev_id)
unsigned long *plat_data;
struct arc_uart_port *uart = &arc_uart_ports[dev_id];
- plat_data = ((unsigned long *)(pdev->dev.platform_data));
+ plat_data = (unsigned long *)dev_get_platdata(&pdev->dev);
if (!plat_data)
return -ENODEV;