diff options
| -rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt | 53 | ||||
| -rw-r--r-- | arch/arm/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/common.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/include/mach/entry-macro.S | 70 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/mach-amlm5900.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/mach-bast.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/mach-h1940.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/mach-n30.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/mach-otom.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/mach-qt2410.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/mach-smdk2410.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/mach-tct_hammer.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-s3c24xx/mach-vr1000.c | 2 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/cpu.h | 1 | ||||
| -rw-r--r-- | drivers/irqchip/Makefile | 1 | ||||
| -rw-r--r-- | drivers/irqchip/irq-s3c24xx.c (renamed from arch/arm/mach-s3c24xx/irq.c) | 523 |
17 files changed, 472 insertions, 205 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt new file mode 100644 index 00000000000..c54c5a9a2a9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt @@ -0,0 +1,53 @@ +Samsung S3C24XX Interrupt Controllers + +The S3C24XX SoCs contain a custom set of interrupt controllers providing a +varying number of interrupt sources. The set consists of a main- and sub- +controller and on newer SoCs even a second main controller. + +Required properties: +- compatible: Compatible property value should be "samsung,s3c2410-irq" + for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later. + +- reg: Physical base address of the controller and length of memory mapped + region. + +- interrupt-controller : Identifies the node as an interrupt controller + +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 4 and interrupt descriptor shall + have the following format: + <ctrl_num parent_irq ctrl_irq type> + + ctrl_num contains the controller to use: + - 0 ... main controller + - 1 ... sub controller + - 2 ... second main controller on s3c2416 and s3c2450 + parent_irq contains the parent bit in the main controller and will be + ignored in main controllers + ctrl_irq contains the interrupt bit of the controller + type contains the trigger type to use + +Example: + + interrupt-controller@4a000000 { + compatible = "samsung,s3c2410-irq"; + reg = <0x4a000000 0x100>; + interrupt-controller; + #interrupt-cells=<4>; + }; + + [...] + + serial@50000000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50000000 0x4000>; + interrupt-parent = <&subintc>; + interrupts = <1 28 0 4>, <1 28 1 4>; + }; + + rtc@57000000 { + compatible = "samsung,s3c2410-rtc"; + reg = <0x57000000 0x100>; + interrupt-parent = <&intc>; + interrupts = <0 30 0 3>, <0 8 0 3>; + }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ada582b15cf..6adf79869f8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -778,6 +778,7 @@ config ARCH_S3C24XX select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS + select MULTI_IRQ_HANDLER select NEED_MACH_GPIO_H select NEED_MACH_IO_H help diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index be6e4d0e6f1..6f46ecfc839 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -14,7 +14,7 @@ obj- := # core -obj-y += common.o irq.o +obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index abefeb38bba..307c3714be5 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -21,6 +21,7 @@ extern void s3c2410_map_io(void); extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2410_init_clocks(int xtal); extern void s3c2410_restart(char mode, const char *cmd); +extern void s3c2410_init_irq(void); #else #define s3c2410_init_clocks NULL #define s3c2410_init_uarts NULL diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S deleted file mode 100644 index 6a21beeba1d..00000000000 --- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for S3C2410-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem -*/ - -#define INTPND (0x10) -#define INTOFFSET (0x14) - -#include <mach/hardware.h> -#include <asm/irq.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #S3C24XX_VA_IRQ - - @@ try the interrupt offset register, since it is there - - ldr \irqstat, [\base, #INTPND ] - teq \irqstat, #0 - beq 1002f - ldr \irqnr, [\base, #INTOFFSET ] - mov \tmp, #1 - tst \irqstat, \tmp, lsl \irqnr - bne 1001f - - @@ the number specified is not a valid irq, so try - @@ and work it out for ourselves - - mov \irqnr, #0 @@ start here - - @@ work out which irq (if any) we got - - movs \tmp, \irqstat, lsl#16 - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr#16 - tst \irqstat, #0xff - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr#8 - tst \irqstat, #0xf - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr#4 - tst \irqstat, #0x3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr#2 - tst \irqstat, #0x1 - addeq \irqnr, \irqnr, #1 - - @@ we have the value -1001: - adds \irqnr, \irqnr, #IRQ_EINT0 -1002: - @@ exit here, Z flag unset if IRQ - - .endm diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 432144cb54a..e27b5c91b3d 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -238,7 +238,7 @@ static void __init amlm5900_init(void) MACHINE_START(AML_M5900, "AML_M5900") .atag_offset = 0x100, .map_io = amlm5900_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index eabe2db42ef..22d6ae926d9 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -605,7 +605,7 @@ MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = bast_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = bast_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 8dd66010284..af4334d6b4d 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -667,11 +667,6 @@ static void __init h1940_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init h1940_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init h1940_init(void) { u32 tmp; @@ -740,7 +735,7 @@ MACHINE_START(H1940, "IPAQ-H1940") .atag_offset = 0x100, .map_io = h1940_map_io, .reserve = h1940_reserve, - .init_irq = h1940_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = h1940_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 73a690f431e..2cb46c37c92 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -592,7 +592,7 @@ MACHINE_START(N30, "Acer-N30") .atag_offset = 0x100, .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END @@ -603,7 +603,7 @@ MACHINE_START(N35, "Acer-N35") .atag_offset = 0x100, .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 7b8670746b6..7e16b0740ec 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -116,7 +116,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .atag_offset = 0x100, .map_io = otom11_map_io, .init_machine = otom11_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 71cf29b12d1..f8feaeadb55 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -343,7 +343,7 @@ static void __init qt2410_machine_init(void) MACHINE_START(QT2410, "QT2410") .atag_offset = 0x100, .map_io = qt2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index fd96f7fc330..a773789e4f3 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -116,7 +116,7 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc /* Maintainer: Jonas Dietsche */ .atag_offset = 0x100, .map_io = smdk2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 31dfe589e34..7fad8f055ca 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -149,7 +149,7 @@ static void __init tct_hammer_init(void) MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .atag_offset = 0x100, .map_io = tct_hammer_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, .init_time = samsung_timer_init, .restart = s3c2410_restart, diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index deeb8a0a403..42e7187fed6 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -355,7 +355,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .atag_offset = 0x100, .map_io = vr1000_map_io, .init_machine = vr1000_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 0f6c47a6475..989fefe18be 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -183,7 +183,6 @@ extern void s3c_init_cpu(unsigned long idcode, /* core initialisation functions */ -extern void s3c24xx_init_irq(void); extern void s5p_init_irq(u32 *vic, u32 num_vic); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index e41ceb9bec2..acf98953272 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o +obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o obj-$(CONFIG_METAG) += irq-metag-ext.o obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o diff --git a/arch/arm/mach-s3c24xx/irq.c b/drivers/irqchip/irq-s3c24xx.c index 3f3de749209..5e40b3424df 100644 --- a/arch/arm/mach-s3c24xx/irq.c +++ b/drivers/irqchip/irq-s3c24xx.c @@ -25,7 +25,11 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <asm/exception.h> #include <asm/mach/irq.h> #include <mach/regs-irq.h> @@ -35,6 +39,8 @@ #include <plat/regs-irqtype.h> #include <plat/pm.h> +#include "irqchip.h" + #define S3C_IRQTYPE_NONE 0 #define S3C_IRQTYPE_EINT 1 #define S3C_IRQTYPE_EDGE 2 @@ -42,6 +48,7 @@ struct s3c_irq_data { unsigned int type; + unsigned long offset; unsigned long parent_irq; /* data gets filled during init */ @@ -68,23 +75,34 @@ struct s3c_irq_intc { struct s3c_irq_data *irqs; }; +/* + * Array holding pointers to the global controller structs + * [0] ... main_intc + * [1] ... sub_intc + * [2] ... main_intc2 on s3c2416 + */ +static struct s3c_irq_intc *s3c_intc[3]; + static void s3c_irq_mask(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; struct s3c_irq_data *parent_data; unsigned long mask; unsigned int irqno; mask = __raw_readl(intc->reg_mask); - mask |= (1UL << data->hwirq); + mask |= (1UL << irq_data->offset); __raw_writel(mask, intc->reg_mask); - if (parent_intc && irq_data->parent_irq) { + if (parent_intc) { parent_data = &parent_intc->irqs[irq_data->parent_irq]; - /* check to see if we need to mask the parent IRQ */ + /* check to see if we need to mask the parent IRQ + * The parent_irq is always in main_intc, so the hwirq + * for find_mapping does not need an offset in any case. + */ if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { irqno = irq_find_mapping(parent_intc->domain, irq_data->parent_irq); @@ -95,17 +113,17 @@ static void s3c_irq_mask(struct irq_data *data) static void s3c_irq_unmask(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; unsigned long mask; unsigned int irqno; mask = __raw_readl(intc->reg_mask); - mask &= ~(1UL << data->hwirq); + mask &= ~(1UL << irq_data->offset); __raw_writel(mask, intc->reg_mask); - if (parent_intc && irq_data->parent_irq) { + if (parent_intc) { irqno = irq_find_mapping(parent_intc->domain, irq_data->parent_irq); s3c_irq_unmask(irq_get_irq_data(irqno)); @@ -114,14 +132,37 @@ static void s3c_irq_unmask(struct irq_data *data) static inline void s3c_irq_ack(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; - unsigned long bitval = 1UL << data->hwirq; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; + unsigned long bitval = 1UL << irq_data->offset; __raw_writel(bitval, intc->reg_pending); if (intc->reg_intpnd) __raw_writel(bitval, intc->reg_intpnd); } +static int s3c_irq_type(struct irq_data *data, unsigned int type) +{ + switch (type) { + case IRQ_TYPE_NONE: + break; + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + irq_set_handler(data->irq, handle_edge_irq); + break; + case IRQ_TYPE_LEVEL_LOW: + case IRQ_TYPE_LEVEL_HIGH: + irq_set_handler(data->irq, handle_level_irq); + break; + default: + pr_err("No such irq type %d", type); + return -EINVAL; + } + + return 0; +} + static int s3c_irqext_type_set(void __iomem *gpcon_reg, void __iomem *extint_reg, unsigned long gpcon_offset, @@ -227,6 +268,7 @@ static struct irq_chip s3c_irq_chip = { .irq_ack = s3c_irq_ack, .irq_mask = s3c_irq_mask, .irq_unmask = s3c_irq_unmask, + .irq_set_type = s3c_irq_type, .irq_set_wake = s3c_irq_wake }; @@ -235,6 +277,7 @@ static struct irq_chip s3c_irq_level_chip = { .irq_mask = s3c_irq_mask, .irq_unmask = s3c_irq_unmask, .irq_ack = s3c_irq_ack, + .irq_set_type = s3c_irq_type, }; static struct irq_chip s3c_irqext_chip = { @@ -258,12 +301,19 @@ static struct irq_chip s3c_irq_eint0t4 = { static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); - struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; + struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *sub_intc = irq_data->sub_intc; unsigned long src; unsigned long msk; unsigned int n; + unsigned int offset; + + /* we're using individual domains for the non-dt case + * and one big domain for the dt case where the subintc + * starts at hwirq number 32. + */ + offset = (intc->domain->of_node) ? 32 : 0; chained_irq_enter(chip, desc); @@ -276,12 +326,64 @@ static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) while (src) { n = __ffs(src); src &= ~(1 << n); - generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); + irq = irq_find_mapping(sub_intc->domain, offset + n); + generic_handle_irq(irq); } chained_irq_exit(chip, desc); } +static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, + struct pt_regs *regs, int intc_offset) +{ + int pnd; + int offset; + int irq; + + pnd = __raw_readl(intc->reg_intpnd); + if (!pnd) + return false; + + /* non-dt machines use individual domains */ + if (!intc->domain->of_node) + intc_offset = 0; + + /* We have a problem that the INTOFFSET register does not always + * show one interrupt. Occasionally we get two interrupts through + * the prioritiser, and this causes the INTOFFSET register to show + * what looks like the logical-or of the two interrupt numbers. + * + * Thanks to Klaus, Shannon, et al for helping to debug this problem + */ + offset = __raw_readl(intc->reg_intpnd + 4); + + /* Find the bit manually, when the offset is wrong. + * The pending register only ever contains the one bit of the next + * interrupt to handle. + */ + if (!(pnd & (1 << offset))) + offset = __ffs(pnd); + + irq = irq_find_mapping(intc->domain, intc_offset + offset); + handle_IRQ(irq, regs); + return true; +} + +asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) +{ + do { + if (likely(s3c_intc[0])) + if (s3c24xx_handle_intc(s3c_intc[0], regs, 0)) + continue; + + if (s3c_intc[2]) + if (s3c24xx_handle_intc(s3c_intc[2], regs, 64)) + continue; + + break; + } while (1); +} + #ifdef CONFIG_FIQ /** * s3c24xx_set_fiq - set the FIQ routing @@ -324,18 +426,11 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, struct s3c_irq_data *parent_irq_data; unsigned int irqno; - if (!intc) { - pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw); - return -EINVAL; - } - - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw); - return -EINVAL; - } - /* attach controller pointer to irq_data */ irq_data->intc = intc; + irq_data->offset = hw; + + parent_intc = intc->parent; /* set handler and flags */ switch (irq_data->type) { @@ -345,7 +440,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, /* On the S3C2412, the EINT0to3 have a parent irq * but need the s3c_irq_eint0t4 chip */ - if (irq_data->parent_irq && (!soc_is_s3c2412() || hw >= 4)) + if (parent_intc && (!soc_is_s3c2412() || hw >= 4)) irq_set_chip_and_handler(virq, &s3c_irqext_chip, handle_edge_irq); else @@ -353,8 +448,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, handle_edge_irq); break; case S3C_IRQTYPE_EDGE: - if (irq_data->parent_irq || - intc->reg_pending == S3C2416_SRCPND2) + if (parent_intc || intc->reg_pending == S3C2416_SRCPND2) irq_set_chip_and_handler(virq, &s3c_irq_level_chip, handle_edge_irq); else @@ -362,7 +456,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, handle_edge_irq); break; case S3C_IRQTYPE_LEVEL: - if (irq_data->parent_irq) + if (parent_intc) irq_set_chip_and_handler(virq, &s3c_irq_level_chip, handle_level_irq); else @@ -373,23 +467,19 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); return -EINVAL; } + + irq_set_chip_data(virq, irq_data); + set_irq_flags(virq, IRQF_VALID); - if (irq_data->parent_irq) { - parent_intc = intc->parent; - if (!parent_intc) { - pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n", - hw); + if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) { + if (irq_data->parent_irq > 31) { + pr_err("irq-s3c24xx: parent irq %lu is out of range\n", + irq_data->parent_irq); goto err; } parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", - hw); - goto err; - } - parent_irq_data->sub_intc = intc; parent_irq_data->sub_bits |= (1UL << hw); @@ -444,7 +534,7 @@ static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) } } -struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, +static struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, struct s3c_irq_data *irq_data, struct s3c_irq_intc *parent, unsigned long address) @@ -518,6 +608,8 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, goto err; } + set_handle_irq(s3c24xx_handle_irq); + return intc; err: @@ -525,12 +617,35 @@ err: return ERR_PTR(ret); } -/* s3c24xx_init_irq - * - * Initialise S3C2410 IRQ system -*/ +static struct s3c_irq_data init_eint[32] = { + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ +}; -static struct s3c_irq_data init_base[32] = { +#ifdef CONFIG_CPU_S3C2410 +static struct s3c_irq_data init_s3c2410base[32] = { { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ @@ -565,34 +680,7 @@ static struct s3c_irq_data init_base[32] = { { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ }; -static struct s3c_irq_data init_eint[32] = { - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ - { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ -}; - -static struct s3c_irq_data init_subint[32] = { +static struct s3c_irq_data init_s3c2410subint[32] = { { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ @@ -606,23 +694,24 @@ static struct s3c_irq_data init_subint[32] = { { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ }; -void __init s3c24xx_init_irq(void) +void __init s3c2410_init_irq(void) { - struct s3c_irq_intc *main_intc; - #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018); - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0], + s3c_intc[0], 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); } +#endif #ifdef CONFIG_CPU_S3C2412 static struct s3c_irq_data init_s3c2412base[32] = { @@ -707,22 +796,22 @@ static struct s3c_irq_data init_s3c2412subint[32] = { void s3c2412_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2412: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_s3c2412eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2412subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0], + s3c_intc[0], 0x4a000018); } #endif @@ -796,35 +885,35 @@ static struct s3c_irq_data init_s3c2416subint[32] = { static struct s3c_irq_data init_s3c2416_second[32] = { { .type = S3C_IRQTYPE_EDGE }, /* 2D */ - { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ }; void __init s3c2416_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2416: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0], + s3c_intc[0], 0x4a000018); - s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); + s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0], + NULL, 0x4a000040); } #endif @@ -877,30 +966,30 @@ static struct s3c_irq_data init_s3c2440subint[32] = { { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ }; void __init s3c2440_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2440: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2440subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0], + s3c_intc[0], 0x4a000018); } #endif @@ -952,28 +1041,28 @@ static struct s3c_irq_data init_s3c2442subint[32] = { { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ }; void __init s3c2442_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2442: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2442subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0], + s3c_intc[0], 0x4a000018); } #endif @@ -1048,21 +1137,219 @@ static struct s3c_irq_data init_s3c2443subint[32] = { void __init s3c2443_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2443: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0], + s3c_intc[0], 0x4a000018); +} +#endif + +#ifdef CONFIG_OF +static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + unsigned int ctrl_num = hw / 32; + unsigned int intc_hw = hw % 32; + struct s3c_irq_intc *intc = s3c_intc[ctrl_num]; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[intc_hw]; + + /* attach controller pointer to irq_data */ + irq_data->intc = intc; + irq_data->offset = intc_hw; + + if (!parent_intc) + irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_edge_irq); + + irq_set_chip_data(virq, irq_data); + + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +/* Translate our of irq notation + * format: <ctrl_num ctrl_irq parent_irq type> + */ +static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type) +{ + struct s3c_irq_intc *intc; + struct s3c_irq_intc *parent_intc; + struct s3c_irq_data *irq_data; + struct s3c_irq_data *parent_irq_data; + int irqno; + + if (WARN_ON(intsize < 4)) + return -EINVAL; + + if (intspec[0] > 2 || !s3c_intc[intspec[0]]) { + pr_err("controller number %d invalid\n", intspec[0]); + return -EINVAL; + } + intc = s3c_intc[intspec[0]]; + + *out_hwirq = intspec[0] * 32 + intspec[2]; + *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK; + + parent_intc = intc->parent; + if (parent_intc) { + irq_data = &intc->irqs[intspec[2]]; + irq_data->parent_irq = intspec[1]; + parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; + parent_irq_data->sub_intc = intc; + parent_irq_data->sub_bits |= (1UL << intspec[2]); + + /* parent_intc is always s3c_intc[0], so no offset */ + irqno = irq_create_mapping(parent_intc->domain, intspec[1]); + if (irqno < 0) { + pr_err("irq: could not map parent interrupt\n"); + return irqno; + } + + irq_set_chained_handler(irqno, s3c_irq_demux); + } + + return 0; +} + +static struct irq_domain_ops s3c24xx_irq_ops_of = { + .map = s3c24xx_irq_map_of, + .xlate = s3c24xx_irq_xlate_of, +}; + +struct s3c24xx_irq_of_ctrl { + char *name; + unsigned long offset; + struct s3c_irq_intc **handle; + struct s3c_irq_intc **parent; + struct irq_domain_ops *ops; +}; + +static int __init s3c_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl) +{ + struct s3c_irq_intc *intc; + struct s3c24xx_irq_of_ctrl *ctrl; + struct irq_domain *domain; + void __iomem *reg_base; + int i; + + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_err("irq-s3c24xx: could not map irq registers\n"); + return -EINVAL; + } + + domain = irq_domain_add_linear(np, num_ctrl * 32, + &s3c24xx_irq_ops_of, NULL); + if (!domain) { + pr_err("irq: could not create irq-domain\n"); + return -EINVAL; + } + + for (i = 0; i < num_ctrl; i++) { + ctrl = &s3c_ctrl[i]; + + pr_debug("irq: found controller %s\n", ctrl->name); + + intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); + if (!intc) + return -ENOMEM; + + intc->domain = domain; + intc->irqs = kzalloc(sizeof(struct s3c_irq_data) * 32, + GFP_KERNEL); + if (!intc->irqs) { + kfree(intc); + return -ENOMEM; + } + + if (ctrl->parent) { + intc->reg_pending = reg_base + ctrl->offset; + intc->reg_mask = reg_base + ctrl->offset + 0x4; + + if (*(ctrl->parent)) { + intc->parent = *(ctrl->parent); + } else { + pr_warn("irq: parent of %s missing\n", + ctrl->name); + kfree(intc->irqs); + kfree(intc); + continue; + } + } else { + intc->reg_pending = reg_base + ctrl->offset; + intc->reg_mask = reg_base + ctrl->offset + 0x08; + intc->reg_intpnd = reg_base + ctrl->offset + 0x10; + } + + s3c24xx_clear_intc(intc); + s3c_intc[i] = intc; + } + + set_handle_irq(s3c24xx_handle_irq); + + return 0; +} + +static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = { + { + .name = "intc", + .offset = 0, + }, { + .name = "subintc", + .offset = 0x18, + .parent = &s3c_intc[0], + } +}; + +int __init s3c2410_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl) +{ + return s3c_init_intc_of(np, interrupt_parent, + s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl)); +} +IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of); + +static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = { + { + .name = "intc", + .offset = 0, + }, { + .name = "subintc", + .offset = 0x18, + .parent = &s3c_intc[0], + }, { + .name = "intc2", + .offset = 0x40, + } +}; + +int __init s3c2416_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl) +{ + return s3c_init_intc_of(np, interrupt_parent, + s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl)); } +IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of); #endif |