diff options
| -rw-r--r-- | Documentation/hwmon/lm90 | 6 | ||||
| -rw-r--r-- | drivers/hwmon/lm90.c | 45 |
2 files changed, 43 insertions, 8 deletions
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index b466974e142..ab81013cc39 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -122,6 +122,12 @@ Supported chips: Prefix: 'g781' Addresses scanned: I2C 0x4c, 0x4d Datasheet: Not publicly available from GMT + * Texas Instruments TMP451 + Prefix: 'tmp451' + Addresses scanned: I2C 0x4c + Datasheet: Publicly available at TI website + http://www.ti.com/litv/pdf/sbos686 + Author: Jean Delvare <khali@linux-fr.org> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 6b0a39264bb..03735c49089 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -60,6 +60,11 @@ * This driver also supports the G781 from GMT. This device is compatible * with the ADM1032. * + * This driver also supports TMP451 from Texas Instruments. This device is + * supported in both compatibility and extended mode. It's mostly compatible + * with ADT7461 except for local temperature low byte register and max + * conversion rate. + * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and * concern all supported chipsets, unless mentioned otherwise. @@ -111,7 +116,7 @@ static const unsigned short normal_i2c[] = { 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, - max6646, w83l771, max6696, sa56004, g781 }; + max6646, w83l771, max6696, sa56004, g781, tmp451 }; /* * The LM90 registers @@ -168,6 +173,9 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define LM90_DEF_CONVRATE_RVAL 6 /* Def conversion rate register value */ #define LM90_MAX_CONVRATE_MS 16000 /* Maximum conversion rate in ms */ +/* TMP451 registers */ +#define TMP451_REG_R_LOCAL_TEMPL 0x15 + /* * Device flags */ @@ -223,6 +231,7 @@ static const struct i2c_device_id lm90_id[] = { { "nct1008", adt7461 }, { "w83l771", w83l771 }, { "sa56004", sa56004 }, + { "tmp451", tmp451 }, { } }; MODULE_DEVICE_TABLE(i2c, lm90_id); @@ -311,6 +320,13 @@ static const struct lm90_params lm90_params[] = { .max_convrate = 9, .reg_local_ext = SA56004_REG_R_LOCAL_TEMPL, }, + [tmp451] = { + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT + | LM90_HAVE_BROKEN_ALERT, + .alert_alarms = 0x7c, + .max_convrate = 9, + .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL, + } }; /* @@ -746,7 +762,7 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, struct lm90_data *data = lm90_update_device(dev); int temp; - if (data->kind == adt7461) + if (data->kind == adt7461 || data->kind == tmp451) temp = temp_from_u8_adt7461(data, data->temp8[attr->index]); else if (data->kind == max6646) temp = temp_from_u8(data->temp8[attr->index]); @@ -790,7 +806,7 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, val -= 16000; mutex_lock(&data->update_lock); - if (data->kind == adt7461) + if (data->kind == adt7461 || data->kind == tmp451) data->temp8[nr] = temp_to_u8_adt7461(data, val); else if (data->kind == max6646) data->temp8[nr] = temp_to_u8(val); @@ -812,7 +828,7 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, struct lm90_data *data = lm90_update_device(dev); int temp; - if (data->kind == adt7461) + if (data->kind == adt7461 || data->kind == tmp451) temp = temp_from_u16_adt7461(data, data->temp11[attr->index]); else if (data->kind == max6646) temp = temp_from_u16(data->temp11[attr->index]); @@ -858,7 +874,7 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, val -= 16000; mutex_lock(&data->update_lock); - if (data->kind == adt7461) + if (data->kind == adt7461 || data->kind == tmp451) data->temp11[index] = temp_to_u16_adt7461(data, val); else if (data->kind == max6646) data->temp11[index] = temp_to_u8(val) << 8; @@ -887,7 +903,7 @@ static ssize_t show_temphyst(struct device *dev, struct lm90_data *data = lm90_update_device(dev); int temp; - if (data->kind == adt7461) + if (data->kind == adt7461 || data->kind == tmp451) temp = temp_from_u8_adt7461(data, data->temp8[attr->index]); else if (data->kind == max6646) temp = temp_from_u8(data->temp8[attr->index]); @@ -915,7 +931,7 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, return err; mutex_lock(&data->update_lock); - if (data->kind == adt7461) + if (data->kind == adt7461 || data->kind == tmp451) temp = temp_from_u8_adt7461(data, data->temp8[LOCAL_CRIT]); else if (data->kind == max6646) temp = temp_from_u8(data->temp8[LOCAL_CRIT]); @@ -1348,6 +1364,19 @@ static int lm90_detect(struct i2c_client *client, && (config1 & 0x3F) == 0x00 && convrate <= 0x08) name = "g781"; + } else + if (address == 0x4C + && man_id == 0x55) { /* Texas Instruments */ + int local_ext; + + local_ext = i2c_smbus_read_byte_data(client, + TMP451_REG_R_LOCAL_TEMPL); + + if (chip_id == 0x00 /* TMP451 */ + && (config1 & 0x1B) == 0x00 + && convrate <= 0x09 + && (local_ext & 0x0F) == 0x00) + name = "tmp451"; } if (!name) { /* identification failed */ @@ -1409,7 +1438,7 @@ static void lm90_init_client(struct i2c_client *client) data->config_orig = config; /* Check Temperature Range Select */ - if (data->kind == adt7461) { + if (data->kind == adt7461 || data->kind == tmp451) { if (config & 0x04) data->flags |= LM90_FLAG_ADT7461_EXT; } |