summaryrefslogtreecommitdiff
path: root/slirp/slirp.c
AgeCommit message (Collapse)AuthorFilesLines
2012-08-06slirp: fix build on mingw32Anthony Liguori1-1/+1
in_addr_t isn't available on mingw32. Just use an unsigned long instead. I considered typedef'ing in_addr_t on mingw32 but this would potentially be brittle if mingw32 did introduce the type. Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-03slirp: Handle whole 127.0.0.0/8 network as local addresses.Anders Waldenborg1-0/+3
Changes so translation of remote address to the host's ip address in the virtual network happens for all addresses in the 127.0.0.0/8 network, not just 127.0.0.1. This fixes so that hostfwd bound to addresses such as 127.0.0.2 works. Signed-off-by: Anders Waldenborg <anders@0x63.nu> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-04-26main_loop_wait: block indefinitelyStefano Stabellini1-0/+7
- remove qemu_calculate_timeout; - explicitly size timeout to uint32_t; - introduce slirp_update_timeout; - pass NULL as timeout argument to select in case timeout is the maximum value; Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-13slirp: Cleanup resources on instance removalJan Kiszka1-0/+3
Close & free sockets when shutting down a slirp instance, also release all buffers. CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-03-13slirp: Remove unneeded if_queuedJan Kiszka1-6/+1
There is now a trivial check on entry of if_start for pending packets, so we can drop the additional tracking via if_queued. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-22char: rename qemu_chr_write() -> qemu_chr_fe_write()Anthony Liguori1-1/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-6/+6
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05slirp: Only start packet expiration for delayed onesJan Kiszka1-0/+3
The expiration timeout must only affect packets that are queued due to pending ARP resolutions. The old version broke ping e.g. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-03Delayed IP packetsFabien Chouteau1-32/+40
In the current implementation, if Slirp tries to send an IP packet to a client with an unknown hardware address, the packet is simply dropped and an ARP request is sent (if_encap in slirp/slirp.c). With this patch, Slirp will send the ARP request, re-queue the packet and try to send it later. The packet is dropped after one second if the ARP reply is not received. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-03Simple ARP tableFabien Chouteau1-47/+16
This patch adds a simple ARP table in Slirp and also adds handling of gratuitous ARP requests. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-07-25Wrap recv to avoid warningsBlue Swirl1-1/+1
Avoid warnings like these by wrapping recv(): CC slirp/ip_icmp.o /src/qemu/slirp/ip_icmp.c: In function 'icmp_receive': /src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror] /usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *' Remove also casts used to avoid warnings. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-23slirp: Forward ICMP echo requests via unprivileged socketsJan Kiszka1-0/+37
Linux 3.0 gained support for unprivileged ICMP ping sockets. Use this feature to forward guest pings to the outer world. The host admin has to set the ping_group_range in order to grant access to those sockets. To allow ping for the users group (GID 100): echo 100 100 > /proc/sys/net/ipv4/ping_group_range Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-21change all rt_clock references to use millisecond resolution accessorsPaolo Bonzini1-1/+1
This was done with: sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \ $(git grep -l 'get_clock\>.*rt_clock' ) sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \ $(git grep -l 'new_timer\>.*rt_clock' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2010-09-17Make ARP replies at least 64 bytes longHervé Poussineau1-1/+2
IEEE 802.3 standard requires Ethernet frames to be at least 64 bytes long. If it is not the case, they will be considered as runt frames, and may be ignored by netcard and/or OS Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-06savevm: Add DeviceState paramAlex Williamson1-2/+3
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-07slirp: remove dead nested assignment, spotted by clangBlue Swirl1-2/+1
Although the value stored to 'r' is used in the enclosing expression, the value is never actually read from 'r'. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12Fix sys-queue.h conflict for goodBlue Swirl1-8/+8
Problem: Our file sys-queue.h is a copy of the BSD file, but there are some additions and it's not entirely compatible. Because of that, there have been conflicts with system headers on BSD systems. Some hacks have been introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896, f40d753718c72693c5f520f0d9899f6e50395e94, 96555a96d724016e13190b28cffa3bc929ac60dc and 3990d09adf4463eca200ad964cc55643c33feb50 but the fixes were fragile. Solution: Avoid the conflict entirely by renaming the functions and the file. Revert the previous hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-05Fix Sparse warnings: add "static"Blue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-31Fix compiler warningsStefan Weil1-2/+2
Starting with commit df7a86ed735eafefbd046c8cad7134652fe3f600, mingw32 builds result in a compiler warning for dns_addr: CC slirp/slirp.o /home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: missing braces around initializer /home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: (near initialization for ‘dns_addr.S_un’) Removing the assignment fixes the warning without the need of special code for mingw32 (and also saves some bytes in the resulting binary). To fix another potential compiler warning, the missing 'static' attribute was added. The same changes were applied to dns_addr_time. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-27slirp: Read host DNS config on demandEd Swierk1-10/+36
Currently the qemu user-mode networking stack reads the host DNS configuration (/etc/resolv.conf or the Windows equivalent) only once when qemu starts. This causes name lookups in the guest to fail if the host is moved to a different network from which the original DNS servers are unreachable, a common occurrence when the host is a laptop. This patch changes the slirp code to read the host DNS configuration on demand, caching the results for at most 1 second to avoid unnecessary overhead if name lookups occur in rapid succession. On non-Windows hosts, /etc/resolv.conf is re-read only if the file has been replaced or if its size or mtime has changed. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27slirp: Remove our_addr codeEd Swierk1-17/+0
Three problems with our_addr: - It's determined only once when qemu starts, but the address can change (just like the DNS configuration can). - It's supposed to be the IP address of a host network interface, but there's no guarantee that gethostbyname(gethostname()) actually does that: the host might be a laptop that has only a loopback interface up, or the hostname might be localhost.localdomain, etc. - It's useless at best: get_dns_addr() calls it, there's no reason to send DNS requests to a different IP address if you're running a DNS server on the host and resolv.conf points to 127.0.0.1. These problems are easily solved by removing the code. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-01Add missing "static"Blue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-27slirp: Use monotonic clock if available (v2)Ed Swierk1-25/+2
Calling gettimeofday() to compute a time interval can cause problems if the system clock jumps forwards or backwards; replace updtime() with qemu_get_clock(rt_clock), which calls clock_gettime(CLOCK_MONOTONIC) if it is available. Also remove some useless macros. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27slirp: Fix guestfwd for incoming dataJan Kiszka1-7/+7
Unless a virtual server address was explicitly defined (which is impossible with the legacy -net channel format), guestfwd did not properly forwarded host->guest packets. This patch fixes it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Save/restore bootp client statesJan Kiszka1-1/+27
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Enable multiple instancesJan Kiszka1-9/+14
Once again this was a long journey to reach the destination: Allow to instantiate slirp multiple times. But as in the past, the journey was worthwhile, cleaning up, fixing and enhancing various parts of the user space network stack along the way. What is this particular change good for? Multiple slirps instances allow separated user space networks for guests with multiple NICs. This is already possible, but without any slirp support for the second network, ie. without a chance to talk to that network from the host via IP. We have a legacy guest system here that benefits from this slirp enhancement, allowing us to run both of its NICs purely over unprivileged user space IP stacks. Another benefit of this patch is that it simply removes an artificial restriction of the configuration space qemu is providing, avoiding another source of surprises that users may face when playing with possible setups. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Allocate/free stack instance dynamicallyJan Kiszka1-13/+19
Allocate the internal slirp state dynamically and provide and call slirp_cleanup to properly release it after use. This patch finally unbreaks slirp release and re-instantiation via host_net_* monitor commands. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Use internal state in interfaceJan Kiszka1-24/+22
This now also exports the internal state to the slirp users in qemu, returning it from slirp_init and expecting it along with service invocations. Additionally provide an opaque value interface for the callbacks from slirp into the qemu core. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Factor out internal state structureJan Kiszka1-86/+96
The essence of this patch is to stuff (almost) all global variables of the slirp stack into the structure Slirp. In this step, we still keep the structure as global variable, directly accessible by the whole stack. Changes to the external interface of slirp will be applied in the following patches. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop link_up checks from if_output and slirp_socket_can_recvJan Kiszka1-3/+0
link_up is true once slirp is initialized, so these check are really not required. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Clean up timeout handling around slirp_select_fill/pollJan Kiszka1-36/+4
Again lot of dead code. Remove it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Kill slirp_is_initedJan Kiszka1-7/+13
Avoid the need for slirp_is_inited by refactoring the protected slirp_select_* functions. This also avoids the clearing of all fd sets on select errors. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Clean up updtimeJan Kiszka1-8/+5
Drop redundant typecasts in both variants and remove the pointless round-up in the UNIX version. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Make IP packet ID consistentJan Kiszka1-1/+7
Currently, ip_id is always initialized to 0 on slirp startup (despite the broken attempt to derive it from the clock). This is good for reproducibility. But it is not preserved across save/restore. This patch therefore drops the dead initialization code from ip_init and introduces ip_id to the persistent slirp state. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Factor out one-time initializationJan Kiszka1-19/+41
In order to prepare re-initialization and multi-instance slirp, factor out init code that is of global scope and (at least for now) only need to be run once. This also fixes the potentially uninitialized use of our_addr in get_dns_addr. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop dead codeJan Kiszka1-13/+0
After all its years inside the qemu tree, there is no point in keeping the dead code paths of slirp. This patch is a first round of removing usually commented out code parts. More cleanups need to follow (and maybe finally a proper reindention). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Do not allow to remove non-hostfwd socketsJan Kiszka1-9/+5
Prevent that the users accidentally shoots down dynamic sockets. This allows to remove looping for removals as there can now only be one match. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Explicitely mark host-forwarding socketsJan Kiszka1-2/+2
Mark sockets that describe host forwardings. This is required for their (and only their) proper deletion and for pretty-printing. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Prepare for persistent socket state flagsJan Kiszka1-3/+6
This prepares for adding flags to socket.so_state that must not be removed during the lifetime of a socket. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Bind support for host forwarding rulesJan Kiszka1-5/+6
Extend the hostfwd rule format so that the user can specify on which host interface qemu should listen for incoming connections. If omitted, binding will takes place against all interfaces. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Fix port comparision in slirp_remove_hostfwdJan Kiszka1-2/+6
For UDP host forwardings, fport is not stable, every outgoing packet of the redirection can modify it. Use getsockname instead to look up the port that is actually used on the host side. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Rework external configuration interfaceJan Kiszka1-28/+24
With the internal IP configuration made more flexible, we can now enhance the user interface. This patch adds a number of new options to "-net user": net (address and mask), host, dhcpstart, dns and smbserver. It also renames "redir" to "hostfwd" and "channel" to "guestfwd" in order to (hopefully) clarify their meanings. The format of guestfwd is extended so that the user can define not only the port but also the virtual server's IP address the forwarding starts from. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Rework internal configurationJan Kiszka1-59/+83
The user mode IP stack is currently only minimally configurable /wrt to its virtual IP addresses. This is unfortunate if some guest has a fixed idea of which IP addresses to use. Therefore this patch prepares the stack for fully configurable IP addresses and masks. The user interface and default addresses remain untouched in this step, they will be enhanced in the following patch. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Move smb, redir, tftp and bootp parameters and -net channelJan Kiszka1-1/+13
So far a couple of slirp-related parameters were expressed via stand-alone command line options. This it inconsistent and unintuitive. Moreover, it prevents both dynamically reconfigured (host_net_add/ delete) and multi-instance slirp. This patch refactors the configuration by turning -smb, -redir, -tftp and -bootp as well as -net channel into options of "-net user". The old stand-alone command line options are still processed, but no longer advertised. This allows smooth migration of management applications to to the new syntax and also the extension of that syntax later in this series. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Revert "User networking: Show active connections"Jan Kiszka1-24/+0
This reverts commit 1c6ed9f3379faac83da0ed3e95cbd49003ac0dd1. It's redundant to slirp statistics, which are going to be split up / reworked later on. Conflicts: monitor.c net.c Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-09slirp: Reorder initializationJan Kiszka1-1/+1
This patch reorders the initialization of slirp itself as well as its associated features smb and redirection. So far the first reference to slirp triggered the initialization, independent of the actual -net user option which may carry additional parameters. Now we save any request to add a smb export or some redirections until the actual initialization of the stack. This also allows to move a few parameters that were passed via global variable into the argument list of net_slirp_init. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-05-28User networking: Show active connectionsAlexander Graf1-0/+24
In case you're wondering what connections exactly you have open or maybe redir'ed in the past, you can't really find out from qemu right now. This patch enables you to see all current connections the host only networking holds open, so you can kill them using the previous patch. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27User Networking: Enable removal of redirectionsAlexander Graf1-0/+23
Using the new host_net_redir command you can easily create redirections on the fly while your VM is running. While that's great, it's missing the removal of redirections, in case you want to have a port closed again at a later point in time. This patch adds support for removal of redirections. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21Cast pointer arguments of get/setsockopt, send to void * to keep GCCmalc1-1/+1
from producing a warning about pointer type mismatches with Winsock Signed-off-by: malc <av1474@comtv.ru>
2009-03-07Sparse fixes: NULL use, header order, ANSI prototypes, staticblueswir11-4/+4
Fix Sparse warnings: * use NULL instead of plain 0 * rearrange header include order to avoid redefining types accidentally * ANSIfy SLIRP * avoid "restrict" keyword * add static git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6736 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 20:21:42 +0000