i965: Don't use a temporary when generating an indirect sample

Previously when generating the send instruction for a sample
instruction with an indirect sampler it would use the destination
register as a temporary store. This breaks when used in combination
with the opt_sampler_eot optimisation because that forces the
destination to be null. This patch fixes that by avoiding the temp
register altogether.

The reason the temporary register was needed was because it was trying
to ensure the binding table index doesn't overflow a byte by and'ing
it with 0xff. The result is then or'd with samper_index<<8. This patch
instead just and's the whole thing by 0xfff. This will ensure that a
bogus sampler index won't overflow into the rest of the message
descriptor but unlike the previous code it won't ensure that the
binding table index doesn't overflow into the sampler index. It
doesn't seem like that should matter very much though because if the
shader is generating a bogus sampler index then it's going to just get
garbage out either way.

Instead of doing sampler_index<<8|(sampler_index+base_table_index) the
new code avoids one operation by doing
sampler_index*0x101+base_table_index which should be equivalent.
However if we wanted to avoid the multiply for some reason we could do
this by adding an extra or instruction still without needing the
temporary register.

This fixes a number of Piglit tests on Skylake that were using
indirect samplers such as:

 spec@arb_gpu_shader5@execution@sampler_array_indexing@fs-simple

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 6c846dc57b1d6f3e015a604dba1976f96c4be9e9)

2 files changed, 8 insertions, 26 deletions

diff --git a/src/mesa/drivers/dri/i965/brw_fs_generator.cpp b/src/mesa/drivers/dri/i965/brw_fs_generator.cpp
index 0be0f86655..ea46b1a191 100644
--- a/src/mesa/drivers/dri/i965/brw_fs_generator.cpp
+++ b/src/mesa/drivers/dri/i965/brw_fs_generator.cpp
@@ -779,27 +779,18 @@ fs_generator::generate_tex(fs_inst *inst, struct brw_reg dst, struct brw_reg src
       brw_mark_surface_used(prog_data, sampler + base_binding_table_index);
    } else {
       /* Non-const sampler index */
-      /* Note: this clobbers `dst` as a temporary before emitting the send */
 
       struct brw_reg addr = vec1(retype(brw_address_reg(0), BRW_REGISTER_TYPE_UD));
-      struct brw_reg temp = vec1(retype(dst, BRW_REGISTER_TYPE_UD));
-
       struct brw_reg sampler_reg = vec1(retype(sampler_index, BRW_REGISTER_TYPE_UD));
 
       brw_push_insn_state(p);
       brw_set_default_mask_control(p, BRW_MASK_DISABLE);
       brw_set_default_access_mode(p, BRW_ALIGN_1);
 
-      /* Some care required: `sampler` and `temp` may alias:
-       *    addr = sampler & 0xff
-       *    temp = (sampler << 8) & 0xf00
-       *    addr = addr | temp
-       */
-      brw_ADD(p, addr, sampler_reg, brw_imm_ud(base_binding_table_index));
-      brw_SHL(p, temp, sampler_reg, brw_imm_ud(8u));
-      brw_AND(p, temp, temp, brw_imm_ud(0x0f00));
-      brw_AND(p, addr, addr, brw_imm_ud(0x0ff));
-      brw_OR(p, addr, addr, temp);
+      /* addr = ((sampler * 0x101) + base_binding_table_index) & 0xfff */
+      brw_MUL(p, addr, sampler_reg, brw_imm_ud(0x101));
+      brw_ADD(p, addr, addr, brw_imm_ud(base_binding_table_index));
+      brw_AND(p, addr, addr, brw_imm_ud(0xfff));
 
       brw_pop_insn_state(p);
 
diff --git a/src/mesa/drivers/dri/i965/brw_vec4_generator.cpp b/src/mesa/drivers/dri/i965/brw_vec4_generator.cpp
index ef77b8df05..9699607ed2 100644
--- a/src/mesa/drivers/dri/i965/brw_vec4_generator.cpp
+++ b/src/mesa/drivers/dri/i965/brw_vec4_generator.cpp
@@ -398,27 +398,18 @@ vec4_generator::generate_tex(vec4_instruction *inst,
       brw_mark_surface_used(&prog_data->base, sampler + base_binding_table_index);
    } else {
       /* Non-constant sampler index. */
-      /* Note: this clobbers `dst` as a temporary before emitting the send */
 
       struct brw_reg addr = vec1(retype(brw_address_reg(0), BRW_REGISTER_TYPE_UD));
-      struct brw_reg temp = vec1(retype(dst, BRW_REGISTER_TYPE_UD));
-
       struct brw_reg sampler_reg = vec1(retype(sampler_index, BRW_REGISTER_TYPE_UD));
 
       brw_push_insn_state(p);
       brw_set_default_mask_control(p, BRW_MASK_DISABLE);
       brw_set_default_access_mode(p, BRW_ALIGN_1);
 
-      /* Some care required: `sampler` and `temp` may alias:
-       *    addr = sampler & 0xff
-       *    temp = (sampler << 8) & 0xf00
-       *    addr = addr | temp
-       */
-      brw_ADD(p, addr, sampler_reg, brw_imm_ud(base_binding_table_index));
-      brw_SHL(p, temp, sampler_reg, brw_imm_ud(8u));
-      brw_AND(p, temp, temp, brw_imm_ud(0x0f00));
-      brw_AND(p, addr, addr, brw_imm_ud(0x0ff));
-      brw_OR(p, addr, addr, temp);
+      /* addr = ((sampler * 0x101) + base_binding_table_index) & 0xfff */
+      brw_MUL(p, addr, sampler_reg, brw_imm_ud(0x101));
+      brw_ADD(p, addr, addr, brw_imm_ud(base_binding_table_index));
+      brw_AND(p, addr, addr, brw_imm_ud(0xfff));
 
       brw_pop_insn_state(p);