From 3cdeb713dc66057b50682048c151eae07b186c42 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 11 Mar 2014 14:22:19 -0600 Subject: PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left them disabled"), pciehp surprise removal stopped working. This happens because pci_reenable_device() on the hotplug bridge (used in the pciehp_configure_device() path) clears the Interrupt Disable bit, which apparently breaks the bridge's MSI hotplug event reporting. Previously we cleared the Interrupt Disable bit in do_pci_enable_device(), which is used by both pci_enable_device() and pci_reenable_device(). But we use pci_reenable_device() after the driver may have enabled MSI or MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X. This patch clears Interrupt Disable only when MSI/MSI-X has not been enabled. Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691 Reported-and-tested-by: Andreas Noever Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org CC: Sarah Sharp --- drivers/pci/pci.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6b05f6134b68..fdbc294821e6 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1192,6 +1192,9 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars) return err; pci_fixup_device(pci_fixup_enable, dev); + if (dev->msi_enabled || dev->msix_enabled) + return 0; + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); if (pin) { pci_read_config_word(dev, PCI_COMMAND, &cmd); -- cgit v1.2.3