From 435019b48033138581a6171093b181fc6b4d3d30 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 21 Nov 2017 08:22:26 +0100 Subject: can: kvaser_usb: free buf in error paths The allocated buffer was not freed if usb_submit_urb() failed. Signed-off-by: Jimmy Assarsson Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/can') diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 9b18d96ef526..075644591498 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -813,6 +813,7 @@ static int kvaser_usb_simple_msg_async(struct kvaser_usb_net_priv *priv, if (err) { netdev_err(netdev, "Error transmitting URB\n"); usb_unanchor_urb(urb); + kfree(buf); usb_free_urb(urb); return err; } @@ -1768,6 +1769,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb, spin_unlock_irqrestore(&priv->tx_contexts_lock, flags); usb_unanchor_urb(urb); + kfree(buf); stats->tx_dropped++; -- cgit v1.2.3 From e84f44eb5523401faeb9cc1c97895b68e3cfb78d Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 21 Nov 2017 08:22:27 +0100 Subject: can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback() The conditon in the while-loop becomes true when actual_length is less than 2 (MSG_HEADER_LEN). In best case we end up with a former, already dispatched msg, that got msg->len greater than actual_length. This will result in a "Format error" error printout. Problem seen when unplugging a Kvaser USB device connected to a vbox guest. warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Jimmy Assarsson Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/can') diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 075644591498..d87e330a20b3 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -1334,7 +1334,7 @@ static void kvaser_usb_read_bulk_callback(struct urb *urb) goto resubmit_urb; } - while (pos <= urb->actual_length - MSG_HEADER_LEN) { + while (pos <= (int)(urb->actual_length - MSG_HEADER_LEN)) { msg = urb->transfer_buffer + pos; /* The Kvaser firmware can only read and write messages that -- cgit v1.2.3 From 8bd13bd522ff7dfa0eb371921aeb417155f7a3be Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 21 Nov 2017 08:22:28 +0100 Subject: can: kvaser_usb: ratelimit errors if incomplete messages are received Avoid flooding the kernel log with "Formate error", if incomplete message are received. Signed-off-by: Jimmy Assarsson Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net/can') diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index d87e330a20b3..f95945915d20 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -609,8 +609,8 @@ static int kvaser_usb_wait_msg(const struct kvaser_usb *dev, u8 id, } if (pos + tmp->len > actual_len) { - dev_err(dev->udev->dev.parent, - "Format error\n"); + dev_err_ratelimited(dev->udev->dev.parent, + "Format error\n"); break; } @@ -1353,7 +1353,8 @@ static void kvaser_usb_read_bulk_callback(struct urb *urb) } if (pos + msg->len > urb->actual_length) { - dev_err(dev->udev->dev.parent, "Format error\n"); + dev_err_ratelimited(dev->udev->dev.parent, + "Format error\n"); break; } -- cgit v1.2.3 From f6c23b174c3c96616514827407769cbcfc8005cf Mon Sep 17 00:00:00 2001 From: Oliver Stäbler Date: Mon, 20 Nov 2017 14:45:15 +0100 Subject: can: ti_hecc: Fix napi poll return value for repoll MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After commit d75b1ade567f ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. So we need to return budget if there are still packets to receive. Signed-off-by: Oliver Stäbler Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ti_hecc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/can') diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index 4d4941469cfc..db6ea936dc3f 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -637,6 +637,9 @@ static int ti_hecc_rx_poll(struct napi_struct *napi, int quota) mbx_mask = hecc_read(priv, HECC_CANMIM); mbx_mask |= HECC_TX_MBOX_MASK; hecc_write(priv, HECC_CANMIM, mbx_mask); + } else { + /* repoll is done only if whole budget is used */ + num_pkts = quota; } return num_pkts; -- cgit v1.2.3 From 5c2cb02edf79ad79d9b8d07c6d52243a948c4c9f Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Thu, 23 Nov 2017 15:44:35 +0100 Subject: can: peak/pci: fix potential bug when probe() fails PCI/PCIe drivers for PEAK-System CAN/CAN-FD interfaces do some access to the PCI config during probing. In case one of these accesses fails, a POSITIVE PCIBIOS_xxx error code is returned back. This POSITIVE error code MUST be converted into a NEGATIVE errno for the probe() function to indicate it failed. Using the pcibios_err_to_errno() function, we make sure that the return code will always be negative. Signed-off-by: Stephane Grosjean Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/peak_canfd/peak_pciefd_main.c | 5 ++++- drivers/net/can/sja1000/peak_pci.c | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net/can') diff --git a/drivers/net/can/peak_canfd/peak_pciefd_main.c b/drivers/net/can/peak_canfd/peak_pciefd_main.c index b4efd711f824..788c3464a3b0 100644 --- a/drivers/net/can/peak_canfd/peak_pciefd_main.c +++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c @@ -825,7 +825,10 @@ err_release_regions: err_disable_pci: pci_disable_device(pdev); - return err; + /* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while + * the probe() function must return a negative errno in case of failure + * (err is unchanged if negative) */ + return pcibios_err_to_errno(err); } /* free the board structure object, as well as its resources: */ diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index 131026fbc2d7..5adc95c922ee 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -717,7 +717,10 @@ failure_release_regions: failure_disable_pci: pci_disable_device(pdev); - return err; + /* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while + * the probe() function must return a negative errno in case of failure + * (err is unchanged if negative) */ + return pcibios_err_to_errno(err); } static void peak_pci_remove(struct pci_dev *pdev) -- cgit v1.2.3 From 658f534c036352a06584c8b2e71a547915173ba9 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 22 Nov 2017 13:01:08 +0100 Subject: can: flexcan: Update IRQ Err Passive information The flexcan IP cores used on MX25 and MX35 do not generate Error Passive IRQs. Update the IP core overview table in the driver accordingly. Suggested-by: ZHU Yi (ST-FIR/ENG1-Zhu) Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/can') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index a13a4896a8bd..eefddae2e99a 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -184,9 +184,9 @@ * Below is some version info we got: * SOC Version IP-Version Glitch- [TR]WRN_INT IRQ Err Memory err RTR re- * Filter? connected? Passive detection ception in MB - * MX25 FlexCAN2 03.00.00.00 no no ? no no + * MX25 FlexCAN2 03.00.00.00 no no no no no * MX28 FlexCAN2 03.00.04.00 yes yes no no no - * MX35 FlexCAN2 03.00.00.00 no no ? no no + * MX35 FlexCAN2 03.00.00.00 no no no no no * MX53 FlexCAN2 03.00.00.00 yes no no no no * MX6s FlexCAN3 10.00.12.00 yes yes no no yes * VF610 FlexCAN3 ? no yes ? yes yes? -- cgit v1.2.3 From 29c64b17a0bc72232acc45e9533221d88a262efb Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 27 Nov 2017 09:18:21 +0100 Subject: can: flexcan: fix VF610 state transition issue Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for VF610 to report correct state transitions. Tested-by: Mirza Krak Cc: linux-stable # >= v4.11 Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net/can') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index eefddae2e99a..0626dcfd1f3d 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -189,7 +189,7 @@ * MX35 FlexCAN2 03.00.00.00 no no no no no * MX53 FlexCAN2 03.00.00.00 yes no no no no * MX6s FlexCAN3 10.00.12.00 yes yes no no yes - * VF610 FlexCAN3 ? no yes ? yes yes? + * VF610 FlexCAN3 ? no yes no yes yes? * * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected. */ @@ -297,7 +297,8 @@ static const struct flexcan_devtype_data fsl_imx6q_devtype_data = { static const struct flexcan_devtype_data fsl_vf610_devtype_data = { .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | - FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP, + FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | + FLEXCAN_QUIRK_BROKEN_PERR_STATE, }; static const struct can_bittiming_const flexcan_bittiming_const = { -- cgit v1.2.3 From 3fed8dbbc42c0639ac03d2361ab5f0606dd49e28 Mon Sep 17 00:00:00 2001 From: Martin Kelly Date: Mon, 27 Nov 2017 15:49:15 -0800 Subject: can: mcba_usb: fix typo Fix typo "analizer" --> "Analyzer". Signed-off-by: Martin Kelly Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/mcba_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/can') diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c index 7f0272558bef..c4355f0a20d5 100644 --- a/drivers/net/can/usb/mcba_usb.c +++ b/drivers/net/can/usb/mcba_usb.c @@ -862,7 +862,7 @@ static int mcba_usb_probe(struct usb_interface *intf, goto cleanup_unregister_candev; } - dev_info(&intf->dev, "Microchip CAN BUS analizer connected\n"); + dev_info(&intf->dev, "Microchip CAN BUS Analyzer connected\n"); return 0; -- cgit v1.2.3 From 1cb35a33a28394fd711bb26ddf3a564f4e9d9125 Mon Sep 17 00:00:00 2001 From: Martin Kelly Date: Mon, 27 Nov 2017 15:49:16 -0800 Subject: can: mcba_usb: fix device disconnect bug Currently, when you disconnect the device, the driver infinitely resubmits all URBs, so you see: Rx URB aborted (-32) in an infinite loop. Fix this by catching -EPIPE (what we get in urb->status when the device disconnects) and not resubmitting. With this patch, I can plug and unplug many times and the driver recovers correctly. Signed-off-by: Martin Kelly Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/mcba_usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/can') diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c index c4355f0a20d5..ef417dcddbf7 100644 --- a/drivers/net/can/usb/mcba_usb.c +++ b/drivers/net/can/usb/mcba_usb.c @@ -592,6 +592,7 @@ static void mcba_usb_read_bulk_callback(struct urb *urb) break; case -ENOENT: + case -EPIPE: case -ESHUTDOWN: return; -- cgit v1.2.3