From 63edea16b7fea3e422e63e218c9e7349b2d0a63b Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sun, 16 Feb 2014 20:10:55 +0100 Subject: dma: sdma: Add imx25 compatible imx25 did not work without a firmware previously. This patch adds a DT compatible to pass the correct data with the default script addresses for imx25. Add imx25 compatible to the list of compatibles in the binding documentation. Signed-off-by: Markus Pargmann Acked-by: Shawn Guo Signed-off-by: Vinod Koul --- Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt') diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index 68b83ecc3850..ee9be9961524 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -1,12 +1,16 @@ * Freescale Smart Direct Memory Access (SDMA) Controller for i.MX Required properties: -- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma", - "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma", - "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or - "fsl,imx6q-sdma". The -to variants should be preferred since they - allow to determnine the correct ROM script addresses needed for - the driver to work without additional firmware. +- compatible : Should be one of + "fsl,imx25-sdma" + "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma" + "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma" + "fsl,imx51-sdma" + "fsl,imx53-sdma" + "fsl,imx6q-sdma" + The -to variants should be preferred since they allow to determnine the + correct ROM script addresses needed for the driver to work without additional + firmware. - reg : Should contain SDMA registers location and length - interrupts : Should contain SDMA interrupt - #dma-cells : Must be <3>. -- cgit v1.2.3