From 3c369a850d3f30ff258ed9b9982b6d06a6232985 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 12 Apr 2021 11:55:47 +0200 Subject: USB: serial: xr: rename GPIO-mode defines Rename the GPIO mode defines so that they reflect the datasheet and how they are used. Signed-off-by: Johan Hovold --- drivers/usb/serial/xr_serial.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c index 64bc9d7b948b..a600448c6016 100644 --- a/drivers/usb/serial/xr_serial.c +++ b/drivers/usb/serial/xr_serial.c @@ -88,11 +88,11 @@ struct xr_txrx_clk_mask { #define XR21V141X_UART_FLOW_MODE_HW 0x1 #define XR21V141X_UART_FLOW_MODE_SW 0x2 -#define XR21V141X_UART_MODE_GPIO_MASK GENMASK(2, 0) -#define XR21V141X_UART_MODE_RTS_CTS 0x1 -#define XR21V141X_UART_MODE_DTR_DSR 0x2 -#define XR21V141X_UART_MODE_RS485 0x3 -#define XR21V141X_UART_MODE_RS485_ADDR 0x4 +#define XR21V141X_GPIO_MODE_MASK GENMASK(2, 0) +#define XR21V141X_GPIO_MODE_RTS_CTS 0x1 +#define XR21V141X_GPIO_MODE_DTR_DSR 0x2 +#define XR21V141X_GPIO_MODE_RS485 0x3 +#define XR21V141X_GPIO_MODE_RS485_ADDR 0x4 #define XR21V141X_REG_ENABLE 0x03 #define XR21V141X_REG_FORMAT 0x0b @@ -433,11 +433,11 @@ static void xr_set_flow_mode(struct tty_struct *tty, return; /* Set GPIO mode for controlling the pins manually by default. */ - gpio_mode &= ~XR21V141X_UART_MODE_GPIO_MASK; + gpio_mode &= ~XR21V141X_GPIO_MODE_MASK; if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) { dev_dbg(&port->dev, "Enabling hardware flow ctrl\n"); - gpio_mode |= XR21V141X_UART_MODE_RTS_CTS; + gpio_mode |= XR21V141X_GPIO_MODE_RTS_CTS; flow = XR21V141X_UART_FLOW_MODE_HW; } else if (I_IXON(tty)) { u8 start_char = START_CHAR(tty); -- cgit v1.2.3