summaryrefslogtreecommitdiff
path: root/tools/iio
AgeCommit message (Collapse)AuthorFilesLines
2018-10-21tools iio: Override CFLAGS assignmentsJiri Olsa1-1/+1
So user could specify outside CFLAGS values. Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-23iio: Add modifier for DUV lightMaxime Roussin-Bélanger1-0/+2
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-21iio: Add channel for PhaseMathieu Othacehe1-0/+2
Add new channel type support for phase. This channel may be used by Time-of-flight sensors to express the phase difference between emitted and received signals. Those sensor will then use the phase shift of return signals to approximate the distance to objects. Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-10iio: Add channel for Position RelativeEugen Hristev1-0/+2
Add new channel type for relative position on a pad. These type of analog sensor offers the position of a pen on a touchpad, and is represented as a voltage, which can be converted to a position on X and Y axis on the pad. The channel will hand the relative position on the pad in both directions. The channel can then be consumed by a touchscreen driver or read as-is for a raw indication of the touchpen on a touchpad. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-20tools: iio: iio_generic_buffer: allow continuous loopingMartin Kelly1-5/+5
Sometimes it's useful to stream samples forever, such as when stress-testing a driver overnight to check for memory leaks or other issues. When the program receives a signal, it will gracefully cleanup, so it is still safe to terminate at any time. Add support for specifying a negative -c option, meaning that we should loop forever. To do so, we need to use a long long (instead of just long) for num_loops so that current code specifying num_loops greater than UNSIGNED_LONG_MAX doesn't break. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-20tools: iio: iio_generic_buffer: fix types to matchMartin Kelly1-1/+4
Several types are mismatched and causing implicit conversions. Fix them up so the types match. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-21tools: fix cross-compile var clobberingMartin Kelly1-2/+0
Currently a number of Makefiles break when used with toolchains that pass extra flags in CC and other cross-compile related variables (such as --sysroot). Thus we get this error when we use a toolchain that puts --sysroot in the CC var: ~/src/linux/tools$ make iio [snip] iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory #include <unistd.h> ^~~~~~~~~~ This occurs because we clobber several env vars related to cross-compiling with lines like this: CC = $(CROSS_COMPILE)gcc Although this will point to a valid cross-compiler, we lose any extra flags that might exist in the CC variable, which can break toolchains that rely on them (for example, those that use --sysroot). This easily shows up using a Yocto SDK: $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi $ echo $CC arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8 --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi $ echo $CROSS_COMPILE arm-poky-linux-gnueabi- $ echo ${CROSS_COMPILE}gcc krm-poky-linux-gnueabi-gcc Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the --sysroot and other flags that enable us to find the right libraries to link against, so we can't find unistd.h and other libraries and headers. Normally with the --sysroot flag we would find unistd.h in the sdk directory in the sysroot: $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h' [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not already set, and it compiles correctly with the above toolchain. So, generalize the logic that perf uses in the common Makefile and remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile. Note that this patch does not fix cross-compile for all the tools (some have other bugs), but it does fix it for all except usb and acpi, which still have other unrelated issues. I tested both with and without the patch on native and cross-build and there appear to be no regressions. Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com Signed-off-by: Martin Kelly <martin@martingkelly.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-09iio: tools: add install sectionAndy Shevchenko1-1/+9
Allow user to call install target. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-09iio: tools: move to tools buildsystemAndy Shevchenko2-20/+51
There is a nice buildsystem dedicated for userspace tools in Linux kernel tree. Switch iio target to be built by it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-05-07iio: tools: generic_buffer: increase trigger lengthEugen Hristev1-1/+1
Increased trigger length to 64 in order to cope with trigger names like fc030000.adc-dev0-external-rising Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-27tools/iio: Use include/uapi with __EXPORTED_HEADERS__Sekhar Nori1-1/+1
Use the local uapi headers to keep in sync with "recently" added enum values like IIO_UVINDEX. Build tested using: $ make -C <kernelsrcdir> tools/iio $ make -C <kernelsrcdir>/tools iio $ make -C <kernelsrcdir>/tools/iio This follows a strategy similar to that used by tools/hv, tools/net and tools/leds among others. Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-05iio: Add channel for GravitySong Hongyan1-0/+2
Add new channel types support for gravity sensor. Gravity sensor provides an application-level or physical collection that identifies a device that measures exclusively the force of Earth's gravity along any number of axes. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf Signed-off-by: Song Hongyan <hongyan.song@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23tools: iio: iio_generic_buffer: drop unneeded parenthesesEva Rachel Retuya1-2/+2
Remove extra parentheses introduced in commit <73e176a tools: iio: iio_generic_buffer: add -A to force-enable all channels>. Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23tools: iio: iio_generic_buffer: rename and change type of force variableEva Rachel Retuya1-4/+5
Replace the type of 'force' flag from int to bool and at the same time rename it to 'force_autochannels' for better readability. Suggested-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23tools: iio: iio_generic_buffer: add -A to force-enable all channelsEva Rachel Retuya1-5/+12
If attribute/s is/are already enabled (by default or via scripts or manual interaction), issuing -a will fail to enable the channels thereby one has to manually disable the said attribute/s before proceeding with auto-enabling. Add a command-line option -A to force-activate all channels regardless of their current state. Suggested-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-22tools: iio: iio_generic_buffer: fix argument '?' optionMugunthan V N1-1/+1
When help ('?') option is passed to the command, the help text printed but not from '?' switch case of getopt_long() but as a invalid argument as below. Fix this by adding '?' to opt_String of getopt_long(). root@am437x-evm:~# ./iio_generic_buffer -? ./iio_generic_buffer: invalid option -- '?' Usage: generic_buffer [options]... Capture, convert and output data from IIO device buffer -a Auto-activate all available channels ... Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-14Merge tag 'iio-for-4.9b' of ↵Greg Kroah-Hartman1-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of iio new device support, features and cleanups for the 4.9 cycle. New device support * ad8801 dac - new driver supporting ad8801 and ad8803 DACs. * adc12138 - new driver supporting TI adc12130/adc12132 and adc12138 ADCs. * ltc2485 adc - new driver * mxc6255 - add support for the mxc6225 part name and fixup the ID check so it works. * vz89x VOC sensor - add support for the vz89te part which drops the voc_short channel and adds CRCs compared to other supported parts. New features * core - immutable triggers. These effectively grant exclusive control over a trigger. The typical usecase is a device representing an analog part (perhaps a MUX) that needs to control the sampling of a downstream ADC. - resource managed trigger registration and triggered_buffer_init. - iio_push_event now protected against case of the event interface registration not having yet occured. Only matters if an interrupt can occur during this window - might happen on shared interrupt lines. - helper to let a driver query if the trigger it is using is provided by itself (using the convention of both device and trigger having the same parent). * tools - iio-utils. Used channel modifier scaling in preference to generic scaling when both exist. * at91-adc - Add support for touchscreen switches closure time needed by some newer parts. * stx104 - support the ADC channels on this ADC/DAC board. As these are the primary feature of the board also move the driver to the iio/adc directory. * sx9500 - device tree bindings. Cleanups / Fixes * ad5755 - fix an off-by-one on devnr limit check (introduced earlier this cycle) * ad7266 - drop NULL check on devm_regulator_get_optional as it can't return NULL. * ak8974 - avoid an unused functional warning due to rework in PM core code. - remove .owner field setting as done by i2c_core. * ina2xx - clear out a left over debug field from chip global data. * hid-sensors - avoid an unused functional warning due to rework in PM core code. * maxim-thermocouple - fix non static symbol warnings. * ms5611 - fetch and enable regulators unconditionally when they aren't optional. * sca3000 - whitespace cleanup. * st_sensors - fetch and enable regulators unconditionally rather than having them supported as optional regulators (missunderstanding on my part amongst others a while back) - followup to previous patch fixes error checking on the regulators. - mark symbols static where possible. - use the 'is it my trigger' help function. This prevents the odd case of another device triggering from the st-sensors trigger whilst the st-sensors trigger is itself not using it but rather using say an hrtimer. * ti-ads1015 - add missing of_node_put. * vz89x - rework to all support of new devices. - prevent reading of a corrupted buffer. - fixup a return value of 0/1 in a bool returning function. Address updates - Vlad Dogaru email address change.
2016-09-12Merge 4.8-rc6 into staging-nextGreg Kroah-Hartman1-1/+1
We need the IIO changes in here for future patches to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-05Merge 4.8-rc5 into staging-nextGreg Kroah-Hartman1-1/+1
We want the staging fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-29tools:iio:iio_generic_buffer: fix trigger-less modeGregor Boirie1-1/+1
Passing the trigger-less mode option on the command line causes iio_generic_buffer to fail searching for an IIO trigger. Fix this by skipping trigger initialization if trigger-less mode is requested. Technically it actually fixes: 7c7e9dad70 where the bug was introduced but as the window to the patch below that changes the context was very small let's mark it with that. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Fixes: deb4d1fdcb5af ("iio: generic_buffer: Fix --trigger-num option") Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-29iio: iio-utils: use channel modifier scaling if it existsMatt Ranostay1-4/+7
Now there are channel modifiers with their own scaling those should be used when possible over the generic channel type scaling. Examples are of IIO_TEMP channel having a generic scaling value, and another having IIO_MOD_TEMP_AMBIENT modifier with another scaling value. Previously the first scaling value for a channel type would be applied to all channels of like type in iio_generic_buffer Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-15tools: iio: lsiio: enumerate processed channelsMatt Ranostay1-1/+2
Enumerate the processed channels (e.g. *_input) as well the raw channels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-15tools: iio: iio_generic_buffer: initialize channel array pointerAlison Schofield1-1/+1
Uninitialized channel pointer causes segmentation fault when we call free(channel) during cleanup() with no channels initialized. This happens when you exit early for usage errors. Initialize the pointer to NULL when it is declared. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Tested-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-11iio: generic_buffer: Fix --trigger-num optionCrestez Dan Leonard1-2/+2
Initialize trig_num to -1 and handle trig_num=0 as a valid id. Fixes: 7c7e9dad (iio: iio_generic_buffer: Add --trigger-num option) Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29iio: iio_generic_buffer: Add --trigger-num optionCrestez Dan Leonard1-5/+29
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29iio: iio_generic_buffer: Add --device-num optionCrestez Dan Leonard1-18/+51
This makes it possible to distinguish between iio devices with the same name. Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29iio: iio_generic_buffer: Cleanup when receiving signalsCrestez Dan Leonard1-64/+108
This will clean (disable buffer/trigger/channels) when doing something like a CTRL-C. Otherwise restarting generic_buffer requires a manual echo 0 > buffer/enable This also cleanup up all the code freeing string buffers at the end of main. We initialize all pointers to NULL so that cleanup can all be done under a single error label. Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29tools: iio: Rename generic_buffer to iio_generic_bufferDaniel Baluta2-5/+5
This makes it clear that generic_buffer is an IIO tool and also complies with filename conventions in tools/iio. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29tools: iio: Add ability to install/uninstallPeter Robinson1-0/+15
Add options to the Makefile for install/uninstall similar to other tools. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-19iio: tools: generic_buffer: auto-enable channelsLinus Walleij2-4/+105
If no channels are enabled when we run generic_buffer on a device, add a command-line option to just enable all of them, run the sampling and disable them all again afterwards. This is extremely useful when I'm low-level testing my sensors with interrupts and triggers, sample session: root@Ux500:/ lsiio Device 000: lsm303dlh_accel Device 001: lis331dl_accel Device 002: l3g4200d Device 003: lsm303dlh_magn Device 004: lps001wp Trigger 000: lsm303dlh_accel-trigger Trigger 001: lis331dl_accel-trigger Trigger 002: l3g4200d-trigger root@Ux500:/ generic_buffer -a -c 10 -n l3g4200d iio device number being used is 2 iio trigger number being used is 2 No channels are enabled, enabling all channels Enabling: in_anglvel_x_en Enabling: in_anglvel_y_en Enabling: in_anglvel_z_en Enabling: in_timestamp_en /sys/bus/iio/devices/iio:device2 l3g4200d-trigger -3.593664 -0.713133 4.870143 946684863662292480 3.225546 0.867357 -4.945878 946684863671875000 -0.676413 0.127296 0.106641 946684863681488037 -0.661113 0.110160 0.128826 946684863690673828 -0.664173 0.113067 0.123471 946684863700683593 -0.664938 0.109395 0.124848 946684863710144042 -0.664173 0.110619 0.130203 946684863719512939 -0.666162 0.111231 0.132651 946684863729125976 -0.668610 0.111690 0.130662 946684863738739013 -0.660501 0.110466 0.131733 946684863748565673 Disabling: in_anglvel_x_en Disabling: in_anglvel_y_en Disabling: in_anglvel_z_en Disabling: in_timestamp_en Pure awesomeness. If some channels have been enabled through scripts or manual interaction, nothing happens. Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03iio: Add channel for UV indexPeter Meerwald-Stadler1-0/+2
UV index indicating strength of sunburn-producing ultraviolet (UV) radiation Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03iio: Add modifier for UV lightPeter Meerwald-Stadler1-0/+2
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03iio: tools: make generic_buffer look for "-trigger"Linus Walleij1-1/+13
All the ST Sensors use the old "<foo>-trigger" rather than the standard "<foo>-devN" new standard suffix for triggers. Now much to do about it since it is ABI, but make the testing tools recognize it too. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-20tools: iio: Update iio_event_monitor namesPeter Meerwald-Stadler1-0/+14
add recently added channel types and modifiers Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16iio: generic_buffer: be helpful about enabling channelsLinus Walleij1-0/+9
Currently if generic_buffer is invoked without first enabling any channels in scan_elements/*_en, it will fail unable to enable the buffer because bytes_per_datum inside the kernel will be zero if no channels are available. It is implied that the user of the program should enable channels manually or with a script before executing generic_buffer. Be more helpful by stopping execution if no enabled channels can be found, and print a helptext that will tell you what is wrong and what needs to be done. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16iio: event_monitor: report unsupported eventsLinus Walleij1-1/+5
This makes the event monitor bail out with a helpful error message if a device does not support events, as a related fix to iio core now makes it return -ENODEV properly. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-12iio: lsiio: fix error code handling errorLinus Walleij1-2/+2
commit acf50b3586f8d8a7530b905e111dda41876d38f4 "tools:iio:lsiio: add error handling" introduced error handling of errors returned from read_sysfs_string(), but with a simple if (retval), missing the fact that these functions return a positive value if the read was successful. As a result lsiio regresses and does not show any devices on my filesystem. Fix this by checking for only negative error codes. Cc: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08tools: iio: remove unnecessary double pointerJoo Aun Saw2-7/+7
Remove unnecessary double pointer from channel sorting function. Signed-off-by: Joo Aun Saw <jasaw@dius.com.au> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08tools: iio: Set caller's ci_array pointer to NULL after freeJoo Aun Saw1-0/+2
On error, caller's ci_array is freed and set to NULL to avoid potential double free if some other user of this code is not sufficiently careful. Counter is reset to zero for consistency. Signed-off-by: Joo Aun Saw <jasaw@dius.com.au> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02tools: iio: iio_utils: Make calc_digits staticJoo Aun Saw1-1/+1
Signed-off-by: Joo Aun Saw <jasaw@dius.com.au> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02tools: iio: iio_utils: remove unnecessary define guardJoo Aun Saw1-5/+0
Signed-off-by: Joo Aun Saw <jasaw@dius.com.au> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02tools: iio: print error message when buffer enable failsIrina Tirdea1-1/+4
Running generic_buffer without enabling any channel of the sensor will fail without printing any error message. Add an error message that indicates buffer enable failed. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02tools: iio: fix mask for 32 bit sensor dataIrina Tirdea1-1/+1
When the the sensor data uses 32 bits out of 32, generic_buffer prints the value 0 for all data read. In this case, the mask is shifted 32 bits, which is beyond the size of an integer. This will lead to the mask always being 0. Before printing, the mask is applied to the raw value, thus generating a final value of 0. Fix the mask by shifting a 64 bit value instead of an integer. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23tools: iio: make scale and offset files optionalJoo Aun Saw1-2/+2
Make scale and offset optional by adding -ENOENT check as not all drivers implement them. Signed-off-by: Joo Aun Saw <jasaw@dius.com.au> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20tools: iio: Send error messages to stderrCristina Opriceana4-47/+59
This patch indends to make some cleanup and send printf error messages to stderr. The changes were performed with coccinelle for failure messages and manual for other cases, such as wrong usage messages. Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20tools: iio: Add ARRAY_SIZE macroCristina Opriceana2-1/+3
Calculation of the length of an array can be done with the ARRAY_SIZE macro to make code more abstract and remove the associated checkpatch.pl warning. Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20tools: iio: Remove unnecessary bracesCristina Opriceana1-2/+1
Single statement blocks don’t need braces. Found with checkpatch.pl. Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20tools: iio: Remove explicit NULL comparisonCristina Opriceana3-35/+35
Remove explicit NULL comparison and write it in its simpler form as recommended by checkpatch.pl. Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-05tools: iio: Add single-byte case for generic_bufferTiberiu Breana1-0/+21
Some sensors export data in an 8-bit format. Add a single-byte case for the generic_buffer tool so that these sensors' buffer data can be visualized. Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>