summaryrefslogtreecommitdiff
path: root/drivers/virtio
AgeCommit message (Collapse)AuthorFilesLines
2018-10-24virtio-balloon: VIRTIO_BALLOON_F_PAGE_POISONWei Wang1-0/+10
The VIRTIO_BALLOON_F_PAGE_POISON feature bit is used to indicate if the guest is using page poisoning. Guest writes to the poison_val config field to tell host about the page poisoning value that is in use. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-10-24virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINTWei Wang1-33/+331
Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-24Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-62/+97
Pull virtio updates from Michael Tsirkin: "virtio, vhost: fixes, tweaks No new features but a bunch of tweaks such as switching balloon from oom notifier to shrinker" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/scsi: increase VHOST_SCSI_PREALLOC_PROT_SGLS to 2048 vhost: allow vhost-scsi driver to be built-in virtio: pci-legacy: Validate queue pfn virtio: mmio-v1: Validate queue PFN virtio_balloon: replace oom notifier with shrinker virtio-balloon: kzalloc the vb struct virtio-balloon: remove BUG() in init_vqs
2018-08-22virtio: pci-legacy: Validate queue pfnSuzuki K Poulose1-2/+12
Legacy PCI over virtio uses a 32bit PFN for the queue. If the queue pfn is too large to fit in 32bits, which we could hit on arm64 systems with 52bit physical addresses (even with 64K page size), we simply miss out a proper link to the other side of the queue. Add a check to validate the PFN, rather than silently breaking the devices. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <cdall@kernel.org> Cc: Peter Maydel <peter.maydell@linaro.org> Cc: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-22virtio: mmio-v1: Validate queue PFNSuzuki K Poulose1-2/+18
virtio-mmio with virtio-v1 uses a 32bit PFN for the queue. If the queue pfn is too large to fit in 32bits, which we could hit on arm64 systems with 52bit physical addresses (even with 64K page size), we simply miss out a proper link to the other side of the queue. Add a check to validate the PFN, rather than silently breaking the devices. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <cdall@kernel.org> Cc: Peter Maydel <peter.maydell@linaro.org> Cc: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-22virtio_balloon: replace oom notifier with shrinkerWei Wang1-51/+59
The OOM notifier is getting deprecated to use for the reasons: - As a callout from the oom context, it is too subtle and easy to generate bugs and corner cases which are hard to track; - It is called too late (after the reclaiming has been performed). Drivers with large amuont of reclaimable memory is expected to release them at an early stage of memory pressure; - The notifier callback isn't aware of oom contrains; Link: https://lkml.org/lkml/2018/7/12/314 This patch replaces the virtio-balloon oom notifier with a shrinker to release balloon pages on memory pressure. The balloon pages are given back to mm adaptively by returning the number of pages that the reclaimer is asking for (i.e. sc->nr_to_scan). Currently the max possible value of sc->nr_to_scan passed to the balloon shrinker is SHRINK_BATCH, which is 128. This is smaller than the limitation that only VIRTIO_BALLOON_ARRAY_PFNS_MAX (256) pages can be returned via one invocation of leak_balloon. But this patch still considers the case that SHRINK_BATCH or shrinker->batch could be changed to a value larger than VIRTIO_BALLOON_ARRAY_PFNS_MAX, which will need to do multiple invocations of leak_balloon. Historically, the feature VIRTIO_BALLOON_F_DEFLATE_ON_OOM has been used to release balloon pages on OOM. We continue to use this feature bit for the shrinker, so the shrinker is only registered when this feature bit has been negotiated with host. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-22virtio-balloon: kzalloc the vb structWei Wang1-4/+1
Zero all the vb fields at alloaction, so that we don't need to zero-initialize each field one by one later. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-22virtio-balloon: remove BUG() in init_vqsWei Wang1-3/+7
It's a bit overkill to use BUG when failing to add an entry to the stats_vq in init_vqs. So remove it and just return the error to the caller to bail out nicely. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-11virtio: Make vp_set_vq_affinity() take a mask.Caleb Raitto2-5/+4
Make vp_set_vq_affinity() take a cpumask instead of taking a single CPU. If there are fewer queues than cores, queue affinity should be able to map to multiple cores. Link: https://patchwork.ozlabs.org/patch/948149/ Suggested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Caleb Raitto <caraitto@google.com> Acked-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30virtio_balloon: fix another race between migration and ballooningJiang Biao1-0/+2
Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e22504296d4f64f ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Huang Chong <huang.chong@zte.com.cn> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2-0/+44
Pull virtio updates from Michael Tsirkin: "virtio, vhost: features, fixes - PCI virtual function support for virtio - DMA barriers for virtio strong barriers - bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: update the comments for transport features virtio_pci: support enabling VFs vhost: fix info leak due to uninitialized memory virtio_ring: switch to dma_XX barriers for rpmsg
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook2-3/+4
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12virtio_pci: support enabling VFsTiwei Bie2-0/+44
There is a new feature bit allocated in virtio spec to support SR-IOV (Single Root I/O Virtualization): https://github.com/oasis-tcs/virtio-spec/issues/11 This patch enables the support for this feature bit in virtio driver. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-04-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-0/+6
Pull virtio update from Michael Tsirkin: "This adds reporting hugepage stats to virtio-balloon" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: export hugetlb page allocation counts
2018-04-10virtio_balloon: export hugetlb page allocation countsJonathan Helman1-0/+6
Export the number of successful and failed hugetlb page allocations via the virtio balloon driver. These 2 counts come directly from the vm_events HTLB_BUDDY_PGALLOC and HTLB_BUDDY_PGALLOC_FAIL. Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2018-04-05headers: untangle kmemleak.h from mm.hRandy Dunlap1-1/+0
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-01virtio_ring: fix num_free handling in error caseTiwei Bie1-2/+0
The vq->vq.num_free hasn't been changed when error happens, so it shouldn't be changed when handling the error. Fixes: 780bc7903a32 ("virtio_ring: Support DMA APIs") Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-01virtio_pci: don't kfree device on register failureweiping zhang1-2/+6
As mentioned at drivers/base/core.c: /* * NOTE: _Never_ directly free @dev after calling this function, even * if it returned an error! Always use put_device() to give up the * reference initialized in this function instead. */ so we don't free vp_dev until vp_dev->vdev.dev.release be called. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-01virtio: split device_register into device_initialize and device_addweiping zhang1-3/+15
In order to make caller do a simple cleanup, we split device_register into device_initialize and device_add. device_initialize always succeeds, so the caller can always use put_device when register_virtio_device faild. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2018-02-01virtio: make VIRTIO a menuconfig to ease disabling it allVincent Legoll1-2/+6
No need to get into the submenu to disable all VIRTIO-related config entries. This makes it easier to disable all VIRTIO config options without entering the submenu. It will also enable one to see that en/dis-abled state from the outside menu. This is only intended to change menuconfig UI, not change the config dependencies. Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-31virtio: virtio_mmio: make of_device_ids const.Arvind Yadav1-1/+1
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 3647 608 0 4255 109f drivers/virtio/virtio_mmio.o File size after constify virtio_mmio_match. text data bss dec hex filename 4063 192 0 4255 109f drivers/virtio/virtio_mmio.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-31virtio-mmio: Use PTR_ERR_OR_ZERO()Vasyl Gomonovych1-3/+1
Fix ptr_ret.cocci warnings: drivers/virtio/virtio_mmio.c:653:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-31virtio_balloon: include disk/file caches memory statisticsTomáš Golembiovský1-0/+4
Add a new field VIRTIO_BALLOON_S_CACHES to virtio_balloon memory statistics protocol. The value represents all disk/file caches. In this case it corresponds to the sum of values Buffers+Cached+SwapCached from /proc/meminfo. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-14virtio_mmio: fix devm cleanupMark Rutland1-34/+9
Recent rework of the virtio_mmio probe/remove paths balanced a devm_ioremap() with an iounmap() rather than its devm variant. This ends up corrupting the devm datastructures, and results in the following boot-time splat on arm64 under QEMU 2.9.0: [ 3.450397] ------------[ cut here ]------------ [ 3.453822] Trying to vfree() nonexistent vm area (00000000c05b4844) [ 3.460534] WARNING: CPU: 1 PID: 1 at mm/vmalloc.c:1525 __vunmap+0x1b8/0x220 [ 3.475898] Kernel panic - not syncing: panic_on_warn set ... [ 3.475898] [ 3.493933] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc3 #1 [ 3.513109] Hardware name: linux,dummy-virt (DT) [ 3.525382] Call trace: [ 3.531683] dump_backtrace+0x0/0x368 [ 3.543921] show_stack+0x20/0x30 [ 3.547767] dump_stack+0x108/0x164 [ 3.559584] panic+0x25c/0x51c [ 3.569184] __warn+0x29c/0x31c [ 3.576023] report_bug+0x1d4/0x290 [ 3.586069] bug_handler.part.2+0x40/0x100 [ 3.597820] bug_handler+0x4c/0x88 [ 3.608400] brk_handler+0x11c/0x218 [ 3.613430] do_debug_exception+0xe8/0x318 [ 3.627370] el1_dbg+0x18/0x78 [ 3.634037] __vunmap+0x1b8/0x220 [ 3.648747] vunmap+0x6c/0xc0 [ 3.653864] __iounmap+0x44/0x58 [ 3.659771] devm_ioremap_release+0x34/0x68 [ 3.672983] release_nodes+0x404/0x880 [ 3.683543] devres_release_all+0x6c/0xe8 [ 3.695692] driver_probe_device+0x250/0x828 [ 3.706187] __driver_attach+0x190/0x210 [ 3.717645] bus_for_each_dev+0x14c/0x1f0 [ 3.728633] driver_attach+0x48/0x78 [ 3.740249] bus_add_driver+0x26c/0x5b8 [ 3.752248] driver_register+0x16c/0x398 [ 3.757211] __platform_driver_register+0xd8/0x128 [ 3.770860] virtio_mmio_init+0x1c/0x24 [ 3.782671] do_one_initcall+0xe0/0x398 [ 3.791890] kernel_init_freeable+0x594/0x660 [ 3.798514] kernel_init+0x18/0x190 [ 3.810220] ret_from_fork+0x10/0x18 To fix this, we can simply rip out the explicit cleanup that the devm infrastructure will do for us when our probe function returns an error code, or when our remove function returns. We only need to ensure that we call put_device() if a call to register_virtio_device() fails in the probe path. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Fixes: 7eb781b1bbb7136f ("virtio_mmio: add cleanup for virtio_mmio_probe") Fixes: 25f32223bce5c580 ("virtio_mmio: add cleanup for virtio_mmio_remove") Cc: Cornelia Huck <cohuck@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: weiping zhang <zhangweiping@didichuxing.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2017-12-07virtio_mmio: add cleanup for virtio_mmio_removeweiping zhang1-0/+6
cleanup all resource allocated by virtio_mmio_probe. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2017-12-07virtio_mmio: add cleanup for virtio_mmio_probeweiping zhang1-10/+41
As mentioned at drivers/base/core.c: /* * NOTE: _Never_ directly free @dev after calling this function, even * if it returned an error! Always use put_device() to give up the * reference initialized in this function instead. */ so we don't free vm_dev until vm_dev.dev.release be called. Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2017-12-01virtio_balloon: fix increment of vb->num_pfns in fill_balloon()Jan Stancek1-2/+1
commit c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM") changed code to increment vb->num_pfns before call to set_page_pfns(), which used to happen only after. This patch fixes boot hang for me on ppc64le KVM guests. Fixes: c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM") Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-01virtio: release virtio index when fail to device_registerweiping zhang1-0/+2
index can be reused by other virtio device. Cc: stable@vger.kernel.org Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-11-14virtio_balloon: fix deadlock on OOMMichael S. Tsirkin1-5/+19
fill_balloon doing memory allocations under balloon_lock can cause a deadlock when leak_balloon is called from virtballoon_oom_notify and tries to take same lock. To fix, split page allocation and enqueue and do allocations outside the lock. Here's a detailed analysis of the deadlock by Tetsuo Handa: In leak_balloon(), mutex_lock(&vb->balloon_lock) is called in order to serialize against fill_balloon(). But in fill_balloon(), alloc_page(GFP_HIGHUSER[_MOVABLE] | __GFP_NOMEMALLOC | __GFP_NORETRY) is called with vb->balloon_lock mutex held. Since GFP_HIGHUSER[_MOVABLE] implies __GFP_DIRECT_RECLAIM | __GFP_IO | __GFP_FS, despite __GFP_NORETRY is specified, this allocation attempt might indirectly depend on somebody else's __GFP_DIRECT_RECLAIM memory allocation. And such indirect __GFP_DIRECT_RECLAIM memory allocation might call leak_balloon() via virtballoon_oom_notify() via blocking_notifier_call_chain() callback via out_of_memory() when it reached __alloc_pages_may_oom() and held oom_lock mutex. Since vb->balloon_lock mutex is already held by fill_balloon(), it will cause OOM lockup. Thread1 Thread2 fill_balloon() takes a balloon_lock balloon_page_enqueue() alloc_page(GFP_HIGHUSER_MOVABLE) direct reclaim (__GFP_FS context) takes a fs lock waits for that fs lock alloc_page(GFP_NOFS) __alloc_pages_may_oom() takes the oom_lock out_of_memory() blocking_notifier_call_chain() leak_balloon() tries to take that balloon_lock and deadlocks Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-07Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-2/+3
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, zfcp and a host of minor updates. The major driver change here is the elimination of the block based cciss driver in favour of the SCSI based hpsa driver (which now drives all the legacy cases cciss used to be required for). Plus a reset handler clean up and the redo of the SAS SMP handler to use bsg lib" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: scsi-mq: Always unprepare before requeuing a request scsi: Show .retries and .jiffies_at_alloc in debugfs scsi: Improve requeuing behavior scsi: Call scsi_initialize_rq() for filesystem requests scsi: qla2xxx: Reset the logo flag, after target re-login. scsi: qla2xxx: Fix slow mem alloc behind lock scsi: qla2xxx: Clear fc4f_nvme flag scsi: qla2xxx: add missing includes for qla_isr scsi: qla2xxx: Fix an integer overflow in sysfs code scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2() scsi: aacraid: get rid of one level of indentation scsi: aacraid: fix indentation errors scsi: storvsc: fix memory leak on ring buffer busy scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough scsi: smartpqi: remove the smp_handler stub scsi: hpsa: remove the smp_handler stub scsi: bsg-lib: pass the release callback through bsg_setup_queue scsi: Rework handling of scsi_device.vpd_pg8[03] scsi: Rework the code for caching Vital Product Data (VPD) scsi: rcu: Introduce rcu_swap_protected() ...
2017-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
2017-09-04Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: - Introduce the ORC unwinder, which can be enabled via CONFIG_ORC_UNWINDER=y. The ORC unwinder is a lightweight, Linux kernel specific debuginfo implementation, which aims to be DWARF done right for unwinding. Objtool is used to generate the ORC unwinder tables during build, so the data format is flexible and kernel internal: there's no dependency on debuginfo created by an external toolchain. The ORC unwinder is almost two orders of magnitude faster than the (out of tree) DWARF unwinder - which is important for perf call graph profiling. It is also significantly simpler and is coded defensively: there has not been a single ORC related kernel crash so far, even with early versions. (knock on wood!) But the main advantage is that enabling the ORC unwinder allows CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel measurably: With frame pointers disabled, GCC does not have to add frame pointer instrumentation code to every function in the kernel. The kernel's .text size decreases by about 3.2%, resulting in better cache utilization and fewer instructions executed, resulting in a broad kernel-wide speedup. Average speedup of system calls should be roughly in the 1-3% range - measurements by Mel Gorman [1] have shown a speedup of 5-10% for some function execution intense workloads. The main cost of the unwinder is that the unwinder data has to be stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel config - which is a modest cost on modern x86 systems. Given how young the ORC unwinder code is it's not enabled by default - but given the performance advantages the plan is to eventually make it the default unwinder on x86. See Documentation/x86/orc-unwinder.txt for more details. - Remove lguest support: its intended role was that of a temporary proof of concept for virtualization, plus its removal will enable the reduction (removal) of the paravirt API as well, so Rusty agreed to its removal. (Juergen Gross) - Clean up and fix FSGS related functionality (Andy Lutomirski) - Clean up IO access APIs (Andy Shevchenko) - Enhance the symbol namespace (Jiri Slaby) * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) objtool: Handle GCC stack pointer adjustment bug x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone() x86/fpu/math-emu: Add ENDPROC to functions x86/boot/64: Extract efi_pe_entry() from startup_64() x86/boot/32: Extract efi_pe_entry() from startup_32() x86/lguest: Remove lguest support x86/paravirt/xen: Remove xen_patch() objtool: Fix objtool fallthrough detection with function padding x86/xen/64: Fix the reported SS and CS in SYSCALL objtool: Track DRAP separately from callee-saved registers objtool: Fix validate_branch() return codes x86: Clarify/fix no-op barriers for text_poke_bp() x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs selftests/x86/fsgsbase: Test selectors 1, 2, and 3 x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common x86/asm: Fix UNWIND_HINT_REGS macro for older binutils x86/asm/32: Fix regs_get_register() on segment registers x86/xen/64: Rearrange the SYSCALL entries x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads ...
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+7
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25virtio_pci: fix cpu affinity supportChristoph Hellwig1-3/+7
Commit 0b0f9dc5 ("Revert "virtio_pci: use shared interrupts for virtqueues"") removed the adjustment of the pre_vectors for the virtio MSI-X vector allocation which was added in commit fb5e31d9 ("virtio: allow drivers to request IRQ affinity when creating VQs"). This will lead to an incorrect assignment of MSI-X vectors, and potential deadlocks when offlining cpus. Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: 0b0f9dc5 ("Revert "virtio_pci: use shared interrupts for virtqueues") Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-24scsi: virtio: Reduce BUG if total_sg > virtqueue size to WARN.Richard W.M. Jones1-2/+3
If using indirect descriptors, you can make the total_sg as large as you want. If not, BUG is too serious because the function later returns -ENOSPC. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24x86/lguest: Remove lguest supportJuergen Gross1-2/+2
Lguest seems to be rather unused these days. It has seen only patches ensuring it still builds the last two years and its official state is "Odd Fixes". Remove it in order to be able to clean up the paravirt code. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: boris.ostrovsky@oracle.com Cc: lguest@lists.ozlabs.org Cc: rusty@rustcorp.com.au Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-16/+12
Two minor conflicts in virtio_net driver (bug fix overlapping addition of a helper) and MAINTAINERS (new driver edit overlapping revamp of PHY entry). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25virtio-balloon: coding format cleanupWei Wang1-2/+4
Clean up the comment format. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-25virtio-balloon: deflate via a page listLiang Li1-14/+8
This patch saves the deflated pages to a list, instead of the PFN array. Accordingly, the balloon_pfn_to_page() function is removed. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-24virtio_ring: allow to store zero as the ctxJason Wang1-1/+1
Allow zero to be store as a ctx, with this we could store e.g zero value which could be meaningful for the case of storing headroom through ctx. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-18virtio_balloon: disable VIOMMU supportMichael S. Tsirkin1-0/+7
virtio balloon bypasses the DMA API entirely so does not support the VIOMMU right now. It's not clear we need that support, for now let's just make sure we don't pretend to support it. Cc: stable@vger.kernel.org Cc: Wei Wang <wei.w.wang@intel.com> Fixes: 1a937693993f ("virtio: new feature to detect IOMMU device quirk") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2017-05-02virtio: allow extra context per descriptorMichael S. Tsirkin1-13/+57
Allow extra context per descriptor. To avoid slow down for data path, this disables use of indirect descriptors for this vq. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-02virtio: add context flag to find vqsMichael S. Tsirkin6-17/+35
Allows maintaining extra context per vq. For ease of use, passing in NULL is legal and disables the feature for all vqs. Includes fixes by Christian for s390, acked by Cornelia. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-02virtio: wrap find_vqsMichael S. Tsirkin2-4/+2
We are going to add more parameters to find_vqs, let's wrap the call so we don't need to tweak all drivers every time. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-11virtio-pci: Remove affinity hint before freeing the interruptMarc Zyngier1-3/+6
virtio-pci registers a per-vq affinity hint when using MSIX, but fails to remove it when freeing the interrupt, resulting in this type of splat: [ 31.111202] WARNING: CPU: 0 PID: 2823 at kernel/irq/manage.c:1503 __free_irq+0x2c4/0x2c8 [ 31.114689] Modules linked in: [ 31.116101] CPU: 0 PID: 2823 Comm: kexec Not tainted 4.10.0+ #6941 [ 31.118911] Hardware name: Generic DT based system [ 31.121319] [<c022fb78>] (unwind_backtrace) from [<c0229d8c>] (show_stack+0x18/0x1c) [ 31.125017] [<c0229d8c>] (show_stack) from [<c05192f4>] (dump_stack+0x84/0x98) [ 31.128427] [<c05192f4>] (dump_stack) from [<c023d940>] (__warn+0xf4/0x10c) [ 31.131910] [<c023d940>] (__warn) from [<c023da20>] (warn_slowpath_null+0x28/0x30) [ 31.135543] [<c023da20>] (warn_slowpath_null) from [<c0290238>] (__free_irq+0x2c4/0x2c8) [ 31.139355] [<c0290238>] (__free_irq) from [<c02902d0>] (free_irq+0x44/0x78) [ 31.142909] [<c02902d0>] (free_irq) from [<c059d3a8>] (vp_del_vqs+0x68/0x1c0) [ 31.146299] [<c059d3a8>] (vp_del_vqs) from [<c056ca4c>] (pci_device_shutdown+0x3c/0x78) The obvious fix is to drop the affinity hint before freeing the interrupt. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-11Revert "virtio_pci: remove struct virtio_pci_vq_info"Michael S. Tsirkin4-43/+122
This reverts commit 5c34d002dcc7a6dd665a19d098b4f4cd5501ba1a. Conflicts: drivers/virtio/virtio_pci_common.c The cleanup seems to be one of the changes that broke hybernation for some users. We are still not sure why but revert helps. This reverts the cleanup changes but keeps the affinity support. Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-11Revert "virtio_pci: use shared interrupts for virtqueues"Michael S. Tsirkin2-112/+148
This reverts commit 07ec51480b5eb1233f8c1b0f5d7a7c8d1247c507. Conflicts: drivers/virtio/virtio_pci_common.c Unfortunately the idea does not work with threadirqs as more than 32 queues can then map to a single interrupts. Further, the cleanup seems to be one of the changes that broke hybernation for some users. We are still not sure why but revert helps. This reverts the cleanup changes but keeps the affinity support. Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-04-11Revert "virtio_pci: don't duplicate the msix_enable flag in struct pci_dev"Michael S. Tsirkin4-4/+7
This reverts commit 53a020c661741f3b87ad3ac6fa545088aaebac9b. The cleanup seems to be one of the changes that broke hybernation for some users. We are still not sure why but revert helps. Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 21:58:30 +0000