summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2016-09-16Merge tag 'usb-serial-4.8-rc7' of ↵Greg Kroah-Hartman1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.8-rc7 Here's another Infineon flashloader device id. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-09-16USB: change bInterval default to 10 msAlan Stern1-11/+17
Some full-speed mceusb infrared transceivers contain invalid endpoint descriptors for their interrupt endpoints, with bInterval set to 0. In the past they have worked out okay with the mceusb driver, because the driver sets the bInterval field in the descriptor to 1, overwriting whatever value may have been there before. However, this approach was never sanctioned by the USB core, and in fact it does not work with xHCI controllers, because they use the bInterval value that was present when the configuration was installed. Currently usbcore uses 32 ms as the default interval if the value in the endpoint descriptor is invalid. It turns out that these IR transceivers don't work properly unless the interval is set to 10 ms or below. To work around this mceusb problem, this patch changes the endpoint-descriptor parsing routine, making the default interval value be 10 ms rather than 32 ms. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Wade Berrier <wberrier@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16usb: musb: Fix tusb6010 compile error on blackfinTony Lindgren1-1/+1
We have CONFIG_BLACKFIN ifdef redefining all musb registers in musb_regs.h and tusb6010.h is never included causing a build error with blackfin-allmodconfig and COMPILE_TEST. Let's fix the issue by not building tusb6010 if CONFIG_BLACKFIN is selected. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-12USB: serial: simple: add support for another Infineon flashloaderDaniele Palmas1-1/+2
This patch adds support for Infineon flashloader 0x8087/0x0801. The flashloader is used in Telit LE940B modem family with Telit flashing application. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-09-09Merge tag 'fixes-for-v4.8-rc6' of ↵Greg Kroah-Hartman6-7/+25
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.8-rc6 Unfortunately we have a bogus dwc3 patch leaked through the cracks and got merged into Linus' HEAD. That patch ended up causing off-by-1 error in our TRB accounting logic. Thankfully John Youn found out the problem and we provided a revert to the bogus dwc3 patch in no time. Apart from this off-by-1 error, we have two fixes to the Renesas drivers, a small fix to our generic phy driver, a NULL pointer dereference fix for f_eem and a build warning fix in dwc3.
2016-09-09Merge tag 'usb-ci-v4.8-rc6' of ↵Greg Kroah-Hartman1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Fix the possible kernel panic when the hardware signal is bad for chipidea udc.
2016-09-09usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phaseClemens Gruber1-0/+9
Problems with the signal integrity of the high speed USB data lines or noise on reference ground lines can cause the i.MX6 USB controller to violate USB specs and exhibit unexpected behavior. It was observed that USBi_UI interrupts were triggered first and when isr_setup_status_phase was called, ci->status was NULL, which lead to a NULL pointer dereference kernel panic. This patch fixes the kernel panic, emits a warning once and returns -EPIPE to halt the device and let the host get stalled. It also adds a comment to point people, who are experiencing this issue, to their USB hardware design. Cc: <stable@vger.kernel.org> #4.1+ Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-08xhci: fix null pointer dereference in stop command timeout functionMathias Nyman1-1/+5
The stop endpoint command has its own 5 second timeout timer. If the timeout function is triggered between USB3 and USB2 host removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd) the ->primary_hcd will be set to NULL at USB3 hcd removal. Fix this by first checking if the PCI host is being removed, and also by using only xhci_to_hcd() as it will always return the primary hcd. CC: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07usb: dwc3: pci: fix build warning on !PM_SLEEPFelipe Balbi1-1/+3
When building a kernel with CONFIG_PM_SLEEP=n, we get the following warning: drivers/usb/dwc3/dwc3-pci.c:253:12: warning: 'dwc3_pci_pm_dummy' defined but not used In order to fix this, we should only define dwc3_pci_pm_dummy() when CONFIG_PM_SLEEP is defined. Fixes: f6c274e11e3b ("usb: dwc3: pci: runtime_resume child device") Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: gadget: prevent potenial null pointer dereference on skb->lenColin Ian King1-1/+1
An earlier fix partially fixed the null pointer dereference on skb->len by moving the assignment of len after the check on skb being non-null, however it failed to remove the erroneous dereference when assigning len. Correctly fix this by removing the initialisation of len as was originally intended. Fixes: 70237dc8efd092 ("usb: gadget: function: f_eem: socket buffer may be NULL") Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS conditionYoshihiro Shimoda1-2/+9
The previous driver is possible to stop the transfer wrongly. For example: 1) An interrupt happens, but not BRDY interruption. 2) Read INTSTS0. And than state->intsts0 is not set to BRDY. 3) BRDY is set to 1 here. 4) Read BRDYSTS. 5) Clear the BRDYSTS. And then. the BRDY is cleared wrongly. Remarks: - The INTSTS0.BRDY is read only. - If any bits of BRDYSTS are set to 1, the BRDY is set to 1. - If BRDYSTS is 0, the BRDY is set to 0. So, this patch adds condition to avoid such situation. (And about NRDYSTS, this is not used for now. But, avoiding any side effects, this patch doesn't touch it.) Fixes: d5c6a1e024dd ("usb: renesas_usbhs: fixup interrupt status clear method") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05usb: phy: phy-generic: Check clk_prepare_enable() errorFabio Estevam1-2/+6
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CONYoshihiro Shimoda1-0/+2
This driver should clear the bit. Otherwise, the VBUS will output wrongly if the usb port on a board has VBUS output capability. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-05Revert "usb: dwc3: gadget: always decrement by 1"John Youn1-1/+4
This reverts commit 6f8245b4e37c ("usb: dwc3: gadget: always decrement by 1"). We can't always decrement this value. We should decrement only if the calculation of free slots results in a LINK TRB being among one of the free slots (dequeue < enqueue). Otherwise, if the LINK TRB is not among the free slots then it should not be decremented. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-30usb: musb: Fix locking errors for host only modeTony Lindgren1-1/+6
If we have USB gadgets disabled and USB_MUSB_HOST set, we get errors "possible irq lock inverssion dependency detected" errors during boot. Let's fix the issue by adding start_musb flag and start the controller after we're out of the spinlock protected section. Reported-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30Merge tag 'usb-ci-v4.8-rc3' of ↵Greg Kroah-Hartman1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Fix one bug that host can't work after insmod gadget module at dual-role mode, the root cause of this issue is the usbcmd.rs is cleared by chipidea udc code.
2016-08-25Merge tag 'usb-serial-4.8-rc4' of ↵Greg Kroah-Hartman3-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.8-rc4 Here are a couple of fixes for non-atomic allocations in write paths, and some new option device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-08-25Merge tag 'fixes-for-v4.8-rc3' of ↵Greg Kroah-Hartman12-20/+57
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.8-rc3 Few fixes on dwc3 again, the most important being a fix for pm_runtime to make it work with current intel platforms. Other than that, there's a signedness bug fix in fsl udc and some other minor fixes.
2016-08-25usb: dwc3: gadget: always decrement by 1Felipe Balbi1-4/+1
We need to decrement in both cases (enq > deq and enq < deq) Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: dwc3: debug: fix ep name on trace outputFelipe Balbi1-1/+1
There was a typo when generating endpoint name which would be very confusing when debugging. Fix it. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: udc: core: don't starve DMA resourcesFelipe Balbi1-1/+1
Always unmap all SG entries as required by DMA API Fixes: a698908d3b3b ("usb: gadget: add generic map/unmap request utilities") Cc: <stable@vger.kernel.org> # v3.4+ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-24USB: serial: option: add WeTelecom 0x6802 and 0x6803 productsAleksandr Makarov1-0/+4
These product IDs are listed in Windows driver. 0x6803 corresponds to WeTelecom WM-D300. 0x6802 name is unknown. Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-08-23USB: avoid left shift by -1Alan Stern1-5/+11
UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Vittorio Zecca <zeccav@gmail.com> Tested-by: Vittorio Zecca <zeccav@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-23USB: fix typo in wMaxPacketSize validationAlan Stern1-1/+1
The maximum value allowed for wMaxPacketSize of a high-speed interrupt endpoint is 1024 bytes, not 1023. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-22usb: gadget: Add the gserial port checking in gs_start_tx()Baolin Wang1-1/+6
When usb gadget is set gadget serial function, it will be crash in below situation. It will clean the 'port->port_usb' pointer in gserial_disconnect() function when usb link is inactive, but it will release lock for disabling the endpoints in this function. Druing the lock release period, it maybe complete one request to issue gs_write_complete()--->gs_start_tx() function, but the 'port->port_usb' pointer had been set NULL, thus it will be crash in gs_start_tx() function. This patch adds the 'port->port_usb' pointer checking in gs_start_tx() function to avoid this situation. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-22usb: dwc3: gadget: don't rely on jiffies while holding spinlockNicolas Saenz Julienne1-3/+3
__dwc3_gadget_wakeup() is called while holding a spinlock, then depends on jiffies in order to timeout while polling the USB core for a link state update. In the case the wakeup failed, the timeout will never happen and will also cause the cpu to stall until rcu_preempt kicks in. This switches to a "decrement variable and wait" timeout scheme. Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-22usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()Dan Carpenter1-5/+2
We can't assign -EINVAL to a u16. Fixes: 3948f0e0c999 ('usb: add Freescale QE/CPM USB peripheral controller driver') Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-22usb: gadget: function: f_rndis: socket buffer may be NULLPeter Chen1-0/+3
In eth_start_xmit, the socket buffer may be NULL. So, add NULL pointer check at .wrap API. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-22usb: gadget: function: f_eem: socket buffer may be NULLPeter Chen1-3/+7
In eth_start_xmit, the socket buffer may be NULL. So, add NULL pointer check at .wrap API. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-22usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe()Wei Yongjun1-1/+1
In case of error, the function usb_get_phy() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS") Cc: <stable@vger.kernel.org> # v4.3+ Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-22usb: dwc2: Add reset control to dwc2Dinh Nguyen2-0/+23
Allow for platforms that have a reset controller driver in place to bring the USB IP out of reset. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-22usb: dwc3: core: allow device to runtime_suspend several timesFelipe Balbi1-0/+1
After going through runtime_suspend/runtime_resume cycle once we would be left with an unbalanced pm_runtime_get() call. Fix that by making sure that we try to suspend right after resuming so things are balanced and device can runtime_suspend again. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-22usb: dwc3: pci: runtime_resume child deviceFelipe Balbi1-1/+8
During runtime_resume of dwc3-pci.c, we need to runtime suspend our child device (which is dwc3 proper) otherwise nothing will happen. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-20USB: serial: option: add WeTelecom WM-D200Aleksandr Makarov1-0/+5
Add support for WeTelecom WM-D200. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22de ProdID=6801 Rev=00.00 S: Manufacturer=WeTelecom Incorporated S: Product=WeTelecom Mobile Products C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-08-19usb: chipidea: udc: don't touch DP when controller is in host modeLi Jun1-2/+5
When the controller is configured to be dual role and it's in host mode, if bind udc and gadgt driver, those gadget operations will do gadget disconnect and finally pull down DP line, which will break host function. Cc: <stable@vger.kernel.org> # 4.1+ Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-08-16xhci: don't dereference a xhci member after removing xhciMathias Nyman1-1/+2
Remove the hcd after checking for the xhci last quirks, not before. This caused a hang on a Alpine Ridge xhci based maching which remove the whole xhci controller when unplugging the last usb device CC: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16usb: xhci: Fix panic if disconnectJim Lin1-0/+3
After a device is disconnected, xhci_stop_device() will be invoked in xhci_bus_suspend(). Also the "disconnect" IRQ will have ISR to invoke xhci_free_virt_device() in this sequence. xhci_irq -> xhci_handle_event -> handle_cmd_completion -> xhci_handle_cmd_disable_slot -> xhci_free_virt_device If xhci->devs[slot_id] has been assigned to NULL in xhci_free_virt_device(), then virt_dev->eps[i].ring in xhci_stop_device() may point to an invlid address to cause kernel panic. virt_dev = xhci->devs[slot_id]; : if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) [] Unable to handle kernel paging request at virtual address 00001a68 [] pgd=ffffffc001430000 [] [00001a68] *pgd=000000013c807003, *pud=000000013c807003, *pmd=000000013c808003, *pte=0000000000000000 [] Internal error: Oops: 96000006 [#1] PREEMPT SMP [] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G U [] Workqueue: pm pm_runtime_work [] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti: ffffffc0bc0ec000 [] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4 This issue is found when running with realtek ethernet device (0bda:8153). Signed-off-by: Jim Lin <jilin@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16xhci: really enqueue zero length TRBs.Alban Browaeys1-1/+2
Enqueue the first TRB even if full_len is zero. Without this "adb install <apk>" freezes the system. Signed-off-by: Alban Browaeys <alban.browaeys@gmail.com> Fixes: 86065c2719a5 ("xhci: don't rely on precalculated value of needed trbs in the enqueue loop") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16xhci: always handle "Command Ring Stopped" eventsMathias Nyman1-6/+7
Fix "Command completion event does not match command" errors by always handling the command ring stopped events. The command ring stopped event is generated as a result of aborting or stopping the command ring with a register write. It is not caused by a command in the command queue, and thus won't have a matching command in the comman list. Solve it by handling the command ring stopped event before checking for a matching command. In most command time out cases we abort the command ring, and get a command ring stopped event. The events command pointer will point at the current command ring dequeue, which in most cases matches the timed out command in the command list, and no error messages are seen. If we instead get a command aborted event before the command ring stopped event, the abort event will increse the command ring dequeue pointer, and the following command ring stopped events command pointer will point at the next, not yet queued command. This case triggered the error message Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-15cdc-acm: fix wrong pipe type on rx interrupt xfersGavin Li2-4/+2
This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb(). Signed-off-by: Gavin Li <git@thegavinli.com> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-15USB: serial: mos7840: fix non-atomic allocation in write pathAlexey Khoroshilov1-2/+2
There is an allocation with GFP_KERNEL flag in mos7840_write(), while it may be called from interrupt context. Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-08-15USB: serial: mos7720: fix non-atomic allocation in write pathAlexey Khoroshilov1-1/+1
There is an allocation with GFP_KERNEL flag in mos7720_write(), while it may be called from interrupt context. Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-08-12Merge tag 'usb-serial-4.8-rc2' of ↵Greg Kroah-Hartman4-1/+40
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.8-rc2 Here is a fix of a memory leak in a driver-registration error path, and some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-08-11usb: misc: usbtest: add fix for driver hangLu Baolu1-3/+4
In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling into usb_sg_cancel(). usb_sg_cancel() will do nothing and return directly if req->status has been set to a non-zero value. This will cause driver hang whenever transfer time out is triggered. This patch fixes this issue. It could be backported to stable kernel with version later than v3.15. Cc: stable@vger.kernel.org # 3.15+ Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-11Merge tag 'fixes-for-v4.8-rc2' of ↵Greg Kroah-Hartman15-35/+69
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.8-rc1 First set of fixes for v4.8-rc cycle. Again, dwc3 is the most active driver with over 60% of this pull request touching it. The most important fixes are related to scatterlist usage with dwc3. Before this pull request, we were increment request->actual multiple times and this would result in request->actual being larger than request->length. Also, if a we received a short packet midway through processing a scatterlist, we were not clearning HWO bit as we should. Other than the large dwc3 scatterlist fixes, we have a new Device ID for Intel's Kabylake silicon. Other drivers, such as fsl_qe_udc and renesas udc, also got a few minor fixes. Details are in shortlog.
2016-08-11usb: dwc3: gadget: stop processing on HWO setFelipe Balbi1-10/+1
stop consuming TRBs when we reach one with HWO bit already set. This will prevent us from prematurely retiring a TRB. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-11usb: dwc3: don't set last bit for ISOC endpointsJanusz Dziedzic1-1/+1
According to Synopsys Databook 2.60a, section 8.3.4, it's stated that: The LST bit should be set to 0 (isochronous transfers normally continue until the endpoint is removed entirely, at which time an End Transfer command is used to stop the transfer). This patch makes sure that detail is observed and fixes a regression with Android Audio playback caused by recent changes to DWC3 gadget. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-11usb: gadget: rndis: free response queue during REMOTE_NDIS_RESET_MSGXerox Lin1-0/+6
When rndis data transfer is in progress, some Windows7 Host PC is not sending the GET_ENCAPSULATED_RESPONSE command for receiving the response for the previous SEND_ENCAPSULATED_COMMAND processed. The rndis function driver appends each response for the SEND_ENCAPSULATED_COMMAND in a queue. As the above process got corrupted, the Host sends a REMOTE_NDIS_RESET_MSG command to do a soft-reset. As the rndis response queue is not freed, the previous response is sent as a part of this REMOTE_NDIS_RESET_MSG's reset response and the Host block any more Rndis transfers. Hence free the rndis response queue as a part of this soft-reset so that the correct response for REMOTE_NDIS_RESET_MSG is sent properly during the response command. Signed-off-by: Rajkumar Raghupathy <raghup@codeaurora.org> Signed-off-by: Xerox Lin <xerox_lin@htc.com> [AmitP: Cherry-picked this patch and folded other relevant fixes from Android common kernel android-4.4] Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-11usb: udc: core: fix error handlingPeter Chen1-1/+4
The udc device needs to be deleted if error occurs Fixes: 855ed04a3758 ("usb: gadget: udc-core: independent registration of gadgets and gadget drivers") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-11usb: gadget: fsl_qe_udc: off by one in setup_received_handle()Dan Carpenter1-1/+1
The udc->eps[] array has USB_MAX_ENDPOINTS elements so > should be >=. Fixes: 3948f0e0c999 ('usb: add Freescale QE/CPM USB peripheral controller driver') Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 13:53:46 +0000