summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_gbl.h
AgeCommit message (Collapse)AuthorFilesLines
2020-10-14Merge tag 'spdx-5.10-rc1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are some SPDX-specific changes for 5.10-rc1. They include: - driver fixes to make spdxcheck.pl work properly - add GFDL licenses as "deprecated" but required due to some of our documentation using them - add Zlib license as "deprecated" but required because we have code with this license in the tree. - convert some drivers to have SPDX identifiers that previously didn't have them. All have been in linux-next for a very long time with no reported issues" * tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: scripts/spdxcheck.py: handle license identifiers in XML comments net/mlx5: IPsec: make spdxcheck.py happy LICENSES/deprecated: add Zlib license text LICENSE: add GFDL deprecated licenses net/qla3xxx: Convert to SPDX license identifiers net/qlge: Convert to SPDX license identifiers net/qlcnic: Convert to SPDX license identifiers scsi/qla2xxx: Convert to SPDX license identifiers scsi/qla4xxx: Convert to SPDX license identifiers
2020-09-29scsi: qla2xxx: Fix reset of MPI firmwareArun Easi1-1/+0
Normally, the MPI firmware is reset when an MPI dump is collected. If an unsaved MPI dump exists in the driver, though, an alternate mechanism is used. This mechanism, which was not fully correct, is not recommended and instead an MPI dump template walk is suggested to perform the MPI reset. To allow for the MPI dump template walk, extra space is reserved in the MPI dump buffer which gets used only when there is already an MPI dump in place. Link: https://lore.kernel.org/r/20200929102152.32278-5-njavali@marvell.com Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Add IOCB resource trackingQuinn Tran1-0/+3
This patch tracks number of IOCB resources used in the I/O fast path. If the number of used IOCBs reach a high water limit, driver would return the I/O as busy and let upper layer retry. This prevents over subscription of IOCB resources where any future error recovery command is unable to cut through. Enable IOCB throttling by default. Link: https://lore.kernel.org/r/20200904045128.23631-12-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Reduce duplicate code in reporting speedQuinn Tran1-0/+2
Indicate correct speed for 16G Mezz card. Link: https://lore.kernel.org/r/20200904045128.23631-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-22scsi: qla2xxx: Setup debugfs entries for remote portsArun Easi1-0/+2
Create a base for adding remote port related entries in debugfs. Link: https://lore.kernel.org/r/20200904045128.23631-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-16scsi/qla2xxx: Convert to SPDX license identifiersThomas Gleixner1-2/+1
All files in this driver directory contain the following notice: See LICENSE.qla2xxx for copyright and licensing details. LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qla2xxx file. Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-01scsi: qla2xxx: SAN congestion management implementationShyam Sundar1-0/+1
* Firmware Initialization with SCM enabled based on NVRAM setting and firmware support (About Firmware). * Enable PUREX and add support for fabric performance impact notification (FPIN) handling. * Allocate a default PUREX item for each vha to handle memory allocation failures in ISR. Link: https://lore.kernel.org/r/20200630102229.29660-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01scsi: qla2xxx: Change in PUREX to handle FPIN ELS requestsShyam Sundar1-1/+2
SAN Congestion Management generates ELS pkts whose size can vary and be > 64 bytes. Change the PUREX handling code to support non-standard ELS pkt size. Link: https://lore.kernel.org/r/20200630102229.29660-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: qla2xxx: Simplify the functions for dumping firmwareBart Van Assche1-10/+11
Instead of passing an argument to the firmware dumping functions that tells these functions whether or not to obtain the hardware lock, obtain that lock before calling these functions. This patch fixes the following recently introduced C=2 build error: CHECK drivers/scsi/qla2xxx/qla_tmpl.c drivers/scsi/qla2xxx/qla_tmpl.c:1133:1: error: Expected ; at end of statement drivers/scsi/qla2xxx/qla_tmpl.c:1133:1: error: got } drivers/scsi/qla2xxx/qla_tmpl.h:247:0: error: Expected } at end of function drivers/scsi/qla2xxx/qla_tmpl.h:247:0: error: got end-of-input Link: https://lore.kernel.org/r/20200518211712.11395-4-bvanassche@acm.org Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Cc: Arun Easi <aeasi@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07scsi: qla2xxx: Make qlafx00_process_aen() return voidJason Yan1-1/+1
No other functions use the return value of qlafx00_process_aen() and the return value is always 0 now. Make it return void. This fixes the following coccicheck warning: drivers/scsi/qla2xxx/qla_mr.c:1716:5-9: Unneeded variable: "rval". Return "0" on line 1768 Link: https://lore.kernel.org/r/20200506061757.19536-1-yanaijie@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: qla2xxx: Fix MPI failure AEN (8200) handlingArun Easi1-0/+3
Today, upon an MPI failure AEN, on top of collecting an MPI dump, a regular firmware dump is also taken and then chip reset. This is disruptive to IOs and not required. Make the firmware dump collection, followed by chip reset, optional (not done by default). Firmware dump buffer and MPI dump buffer are independent of each other with this change and each can have dump that was taken at two different times for two different issues. The MPI dump is saved in a separate buffer and is retrieved differently from firmware dump. To collect full dump on MPI failure AEN, a module parameter is introduced: ql2xfulldump_on_mpifail (default: 0) Link: https://lore.kernel.org/r/20200331104015.24868-2-njavali@marvell.com Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: qla2xxx: Update BPM enablement semantics.Andrew Vasquez1-1/+1
commit e4e3a2ce9556 ("scsi: qla2xxx: Add ability to autodetect SFP type") takes a heavy handed approach to BPM (Buffer Plus Management) enablement: 1) During hardware initialization, if an LR-capable transceiver is recognized, the driver schedules a disruptive post-initialization chip-reset (ISP-ABORT) to allow the BPM settings to be sent to the firmware. This chip-reset will result in (short-term) path-loss to all fc-rports and their attached SCSI devices. 2) LR-detection is triggered during any link-up event, resulting in a refresh and potential chip-reset Based on firmware-team guidance, upon LR-capable transceiver recognition, the driver's hardware initialization code will now re-execute firmware with the new BPM settings, then continue on with driver initialization. To address the second issue, the driver performs LR-capable detection upon the driver receiving a transceiver-insertion asynchronous event from firmware. No short-term path loss is needed with this new semantic. Link: https://lore.kernel.org/r/20200226224022.24518-10-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Andrew Vasquez <andrewv@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPsAndrew Vasquez1-0/+2
There's no point checking flags.disable_msix_handshake in the interrupt handler hot-path. Instead perform the check during queue-pair instantiation and use the proper interrupt handler. Link: https://lore.kernel.org/r/20200226224022.24518-8-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Andrew Vasquez <andrewv@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: qla2xxx: Use FC generic update firmware options routine for ISP27xxGiridhar Malavali1-2/+0
This patch uses generic firmware update options for FCoE based adapters as well to reduce code duplication. Link: https://lore.kernel.org/r/20200226224022.24518-4-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-24scsi: qla2xxx: Add deferred queue for processing ABTS and RDPJoe Carnuccio1-0/+2
This patch adds deferred queue for processing aborts and RDP in the driver. Link: https://lore.kernel.org/r/20200212214436.25532-14-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-24scsi: qla2xxx: Add ql2xrdpenable module parameter for RDPJoe Carnuccio1-0/+1
This patch provides separate module parameter ql2xrdpenable to turn on/off RDP capability in the driver. However, if ql2xsmartsan parameter is enabled, it will also turn on ql2xfdmienable parameter since it is required for RDP to work. Link: https://lore.kernel.org/r/20200212214436.25532-9-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-24scsi: qla2xxx: Add vendor extended RDP additions and amendmentsJoe Carnuccio1-0/+3
This patch adds RDP command support in the driver. With the help of new ql2xsmartsan parameter, driver will use PUREX IOCB mode to send RDP command to switch and will be able to receive various diagnostic data. Link: https://lore.kernel.org/r/20200212214436.25532-8-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-24scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDPJoe Carnuccio1-1/+11
This patch prepares code for implementing Vendor specific extended FDMI/RDP commands. It also addes support for MBC_GET_PORT_DATABASE and MBC_GET_RNID_PARAMS commands. Link: https://lore.kernel.org/r/20200212214436.25532-7-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-21scsi: qla2xxx: Add beacon LED config sysfs interfaceJoe Carnuccio1-0/+1
This patch provides an interface to do the following (using MBC 0x3B): - Displays (in hex) the LED config words for all three LEDs. - Programs the config words for one LED or for all three LEDs. The sysfs node defined is named beacon_config. First, to allow driver to gain LED control, do this: # echo 1 > /sys/class/scsi_host/host#/beacon Then, to display config words for all three LEDs do this: # cat /sys/class/scsi_host/host#/beacon_config To set config words for all three LEDs do this: # echo 3 xxxx yyyy zzzz > /sys/class/scsi_host/host#/beacon_config Or, to set config word for a specific single LED n do this: # echo n xxxx > /sys/class/scsi_host/host#/beacon_config where n is the LED number (0, 1, 2) Finally, to restore LED control back to firmware, do this: # echo 0 > /sys/class/scsi_host/host#/beacon Link: https://lore.kernel.org/r/20200212214436.25532-2-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: qla2xxx: Use common routine to free fcport structQuinn Tran1-0/+1
This patch does not change any any functionality. Link: https://lore.kernel.org/r/20191217220617.28084-8-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: qla2xxx: Cleanup unused async_logout_doneShyam Sundar1-4/+0
This patch removes unused qla2x00_async_logout_done from the code. Link: https://lore.kernel.org/r/20191217220617.28084-5-hmadhani@marvell.com Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: qla2xxx: Add a shadow variable to hold disc_state history of fcportShyam Sundar1-0/+1
This patch adds a shadow variable to hold disc_state history for the fcport and prints state transition when the logging is enabled. Link: https://lore.kernel.org/r/20191217220617.28084-4-hmadhani@marvell.com Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: qla2xxx: Fix fabric scan hangQuinn Tran1-0/+1
On timeout, SRB pointer was cleared from outstanding command array and dropped. It was not allowed to go through the done process and cleanup. This patch will abort the SRB where FW will return it with an error status and resume the normal cleanup. Link: https://lore.kernel.org/r/20191217220617.28084-3-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: qla2xxx: Remove defer flag to indicate immeadiate port lossHimanshu Madhani1-2/+2
During cable pull test case, if the port is disconnected for time larger than devloss timeout, driver does not mark path offline. In such case, instead of notifying SCSI-ML of loop down, driver goes into endless loop of device relogin because defer flag is set. With newer handling of device relogin in driver discovery, defer flag is now redundant. This patch removes defer flag and cleans up code handling port lost indication to SCSI-ML. Link: https://lore.kernel.org/r/20191217220617.28084-2-hmadhani@marvell.com Signed-off-by: Quinn Tran <qtran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-11-08scsi: qla2xxx: Fix device connect issues in P2P configurationArun Easi1-0/+1
P2P needs to take the alternate plogi route. Link: https://lore.kernel.org/r/20191105150657.8092-8-hmadhani@marvell.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Introduce qla2x00_els_dcmd2_free()Bart Van Assche1-0/+2
This patch reduces code duplication. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Inline the qla2x00_fcport_event_handler() functionBart Van Assche1-1/+5
Instead of calling qla2x00_fcport_event_handler() and letting the switch statement inside that function decide which other function to call, call the latter function directly. Remove the event member from the event_arg structure because it is no longer needed. Remove the qla_handle_els_plogi_done() function because it is never called. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Introduce qla2xxx_get_next_handle()Bart Van Assche1-0/+1
This patch reduces code duplication. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Enable type checking for the SRB free and done callback functionsBart Van Assche1-7/+7
Since all pointers passed to the srb_t.done() and srb_t.free() functions have type srb_t, change the type of the first argument of these functions from void * into struct srb *. This allows the compiler to verify the argument types for these functions. This patch does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Change the return type of qla24xx_read_flash_data()Bart Van Assche1-1/+1
This change makes it easier to detect qla24xx_read_flash_data() failures and also to handle such failures. This change does not modify the behavior of the driver since all callers ignore the qla24xx_read_flash_data() return value. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Check the PCI info string output buffer sizeBart Van Assche1-1/+1
Pass the output buffer size to the code that generates a PCI info string and check the output buffer size while generating a PCI info string. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Declare fourth qla2x00_set_model_info() argument constBart Van Assche1-2/+2
Make it clear to humans and also to the compiler that the string passed as fourth argument is not modified. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Declare the fourth ql_dump_buffer() argument constBart Van Assche1-1/+1
This patch makes it clear to humans and also to the compiler that ql_dump_buffer() does not modify the memory the @buf argument points at. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: qla2xxx: move IO flush to the front of NVME rport unregistrationQuinn Tran1-0/+2
On session deletion, current qla code would unregister an NVMe session before flushing IOs. This patch would move the unregistration of NVMe session after IO flush. This way FC-NVMe layer would not have to wait for stuck IOs. In addition, qla2xxx would stop accepting new IOs during session deletion. Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Introduce the dsd32 and dsd64 data structuresBart Van Assche1-3/+3
Introduce two structures for the (DMA address, length) combination instead of using separate structure members for the DMA address and length. This patch fixes several Coverity complaints about 'cur_dsd' being used to write outside the bounds of structure members. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Make qla24xx_async_abort_cmd() staticBart Van Assche1-1/+0
Since qla24xx_async_abort_cmd() is only called from inside qla_init.c, declare that function static. Reorder a few functions to avoid that any forward declarations are needed. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Uninline qla2x00_init_timer()Bart Van Assche1-0/+1
Since qla2x00_init_timer() is not used for I/O commands there is no need to inline this function. Hence uninline this function. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Move qla2x00_clear_loop_id() from qla_inline.h into qla_init.cBart Van Assche1-0/+1
Since qla2x00_clear_loop_id() is not in the hot path, uninline it. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Declare qla2x00_find_new_loop_id() staticBart Van Assche1-2/+0
Since all qla2x00_find_new_loop_id() calls occur in the same source file as the definition of this function, move that function to just before its first caller and declare it static. Convert the header above this function into kernel-doc format. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Move qla2x00_set_fcport_state() from a .h into a .c fileBart Van Assche1-0/+1
The qla2x00_set_fcport_state() function is not in the hot path so move its definition from a .h into a .c file. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Declare qla24xx_build_scsi_crc_2_iocbs() staticBart Van Assche1-2/+0
Since qla24xx_build_scsi_crc_2_iocbs() is only used inside a single source file, declare this function static. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: qla2xxx: Fix formatting of pointer typesBart Van Assche1-1/+1
Improve source code readability by following the Linux kernel coding style for pointer types. This patch only changes whitespace. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Secure flash update support for ISP28XXMichael Hernandez1-6/+16
This patch adds support for Secure flash update with ISP28xx. Signed-off-by: Michael Hernandez <mhernandez@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Add 28xx flash primary/secondary status/image mechanismJoe Carnuccio1-1/+5
Includes the following: - correction to 27xx image status struct; - factoring of 27xx image status validating routines to make common; - image status generation compare that works across zero wrap; - bsg interface to report current active images (as loaded by driver). Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Mike Hernandez <mhernandez@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Update flash read/write routineJoe Carnuccio1-23/+24
This patch makes following changes to flash access routines: - update return type for read_optrom - use void instead of uint32_t * for buffer parameter in read and write optrom routines - fix flash/nvram addressing Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Add support for multiple fwdump templates/segmentsJoe Carnuccio1-1/+1
This patch adds multipe firmware dump template and segments support for ISP27XX/28XX. Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Cleanups for NVRAM/Flash read/write pathJoe Carnuccio1-7/+3
This patch does following: - Clean up NVRAM code. - Optimizes reading of primary/secondary flash image validation. - Remove 0xff mask and make correct width in FLT structure. - Use endian macros to assign static fields in fwdump header. - Correct fdwt checksum calculation. - Simplify ql_dump_buffer() interface usage. - Add endianizers to 27xx firmware image validator. - fixes compiler warnings for big endian architecture. Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qla2xxx: Remove FW default templateJoe Carnuccio1-2/+0
This patch removes FW default template as there will never be case where the default template would be invoked. Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-19scsi: qla2xxx: Move marker request behind QPairQuinn Tran1-2/+2
Current code hard codes marker request to use request and response queue 0. This patch make use of the qpair as the path to access the request/response queues. It allows marker to be place on any hardware queue. Signed-off-by: Quinn Tran <qtran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-19scsi: qla2xxx: Add support for setting port speedAnil Gurumurthy1-0/+1
This patch adds sysfs node 1. There is a new sysfs node port_speed 2. The possible values are 2(Auto neg), 8, 16, 32 3. A value outside of the above defaults to Auto neg 4. Any update to the setting causes a link toggle 5. This feature is currently only for ISP27xx Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com> Signed-off-by: Quinn Tran <qtran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 10:39:08 +0000